Devanco Canada - Get The Right Garage Door Opener‎ and Parts

SSZP19-1

Solid Shaft 1" Keyed Zinc Plated 19'-1"

SSZP11-1

Solid Shaft 1" Keyed Zinc Plated 11'-1" ** to extent of inventory

K72-16421

LiftMaster Limit Shaft Assembly LGO****Discontinued and no Longer available

Assembly includes: Limit shaft Limit nut Sprocket Roll pin Bushing E-Ring and Chain.

Installation Manual

SOLID_SHAFT_9FT

Solid Shaft 1" Keyed 9 ft Galvanized

Actual length is approx. 9'-1"

Q400-D

LiftMaster Circuit Board Assembly with Reset (Q400E)

.225-2-R

Cut-to-Length Torsion Spring .225 x 2" Right Hand Wound Orange/Green

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

.283-134-L

Cut-to-Length Torsion Spring .283 x 1-3/4" Left Hand Wound White

Priced per inch - cones sold seperately
For factory installed cones use part no. C-134-INSTALLED

7001-14-W/B

Commercial Side & Top Weather-Strip 14' Long - White and Black (WB)

White galvanized steel with black dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.
Full case quantity only (10)

23-2015

Limit Switch DPDT 15A 125/250VAC (K23-2015) *** No Longer Available

K001A6424-2

LiftMaster Circuit Board Assembly Kit 2008 315 MHz *** No longer available

Replacement circuit board for Medium-Duty Logic Commercial Operators
Used on models MJ MH MHS MT BMT and MGJ (non- UL325 compliant operators)
315 MHz intergral radio receiver accepts 20 Sec+ remotes or unlimited dip switch

Installation Manual

30B363

Capacitor Motor Start 53 uF - 64 uF 220V *** No Longer Available

.421_6"-RH

Torsion Spring .421 x 6" x 12ft RH Gold

Wire size: .421
Inside diameter: 6"
Length: 12 ft

.468_5-1/4"-RH

Torsion Spring .468 x 5-1/4" x 12ft RH Blue/Orange. **NLA

Wire size: .468
Inside diameter: 5-1/4"
Length: 12 ft

RADIO-47

Manaras MCT-1 3-btn O/C/S transmitter 1 door **Replaced by RADIO-EM932

Open/Close/Stop remote for 1 door
Comes with LED battery life indicator
9V battery included
Can be wall or post mounted
Must be used with MCR series receivers

Programming Instructions

1920.1

Whiting Stainless Steel Top Closure Mounting Plate for Insulated Doors

1336.6

Whiting Stainless Steel Roadside Top Closure Bracket for 10" radius

7176.225_31.910

Whiting Heavy Duty Torsion Assembly .225 x 31" shaft 91"

32-48-160

Extension Spring 8' Door - 160 lbs Brown ** Replaced by 27-48-160

Double - Loop
32" long 48" stretch 160 lb load
Springs sold individually

Spec Sheet

26-40037

Truck Door Offset U-Channel Seal Retainer 96" Long for Whiting DryFreight Doors *** To extent of inventory

Aluminum extrusion construction.
Retainer is offset to allow header clearence with seal when door is in open position.
For use with offset bottom seal #26-40040
Cross Reference: W #8280

HD8460-138

T-Handle Cable Lock System 1-3/8" ***Use HD8460-200 instead***

Complete cable locking system for 1-3/8" door.
System Includes: Auto Latch Striker Keeper T-Handle keyed with 4" shaft Inside Release Handle 3/32" cable and all required hardware.

CBB316

Stop & Sleeve 3/16" 100 pair

Includes 100 stops and 100 oval sleeves

CBB125

Stop & Sleeve 1/4" 100 pair

Includes 100 stops and 100 oval sleeves

GH4416-01-L

Green Hinge #1 12-ga Left Hand *** No longer available

A unique spring-loaded hinge that allows automatic adjustment of the door.
Provides a close tight seal of the door to the building
Green powder coat finish
For doors up to 20ft

8086.225.325

Whiting .225 x 2-5/8 IN x 32-1/2" Roadside with Cones

An original Whiting assembly

GH4416-08-R

Green Hinge #8 12-ga Right Hand *** No longer available

A unique spring-loaded hinge that allows automatic adjustment of the door.
Provides a close tight seal of the door to the building
Green powder coat finish
For doors up to 20ft

.234_2-5/8"-RH

Torsion Spring .234 x 2-5/8" x 12ft RH Blue/White

Wire size: .234
Inside diameter: 2-5/8"
Length: 12 ft

.468_3-3/4"-LH

Torsion Spring .468 x 3-3/4" x 12ft LH Blue/Orange **NLA

Wire size: .468
Inside diameter: 3-3/4"
Length: 12 ft

PRECUT-GALV

Special Order Pre-Cut Galvanized Spring Made to Order

2704.139.140

Whiting Roadside Torsion Spring 2-3/16" ID 14" Long

Torsion spring wire only
.139 wire size

OGH-6214-M-N1-LH

Manaras 1 HP 240V 1Ph Gear Head Operator with Monitored ECB N1 Eyes Left Hand

A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
Includes a self-engaging chain hoist for manual operation
25 cycles per hour 80 cycles a day
Hoist on right side standard can easily be moved to the left in field
Full overload protection
BRACKET112 must be used for wall mounting

.......more details

OGH-6114-M-N1-LH

Manaras 1 HP 120V 1Ph Gear Head Operator with Monitored ECB N1 Eyes Left Hand

A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
Includes a self-engaging chain hoist for manual operation
25 cycles per hour 80 cycles a day
Hoist on right side standard can easily be moved to the left in field
Full overload protection
BRACKET112 must be used for wall mounting

.......more details

K40-35246-2

LiftMaster Warning Sign Kit English Pack of 10

UL325 requires that ALL installations MUST have warning signs placed in plain view to warn pedestrians of the dangers of motorized commercial door access systems

PDC300-1-125-40-20-CH

Pulse300 Direct Drive Opener 1 HP 110/240V 1ph 1.25" Shaft 40:1 20' Cable ** Price by Quote Only

Advanced speed control: up to 24"/s opening up to 16"/s closing
Built-in 24V 9Ah battery backup
Soft start/stop functionality
Universal single-phase power compatibility: 110-240V 50/60Hz
Adjustable force monitoring
Programmable closing timer: 1-99s A high-performance direct-drive door operator with a 90V DC horsepowerrated motor engineered for balanced commercial and industrial doors

.......more details

PDC-300-050-1-40/63-20-CH

Pulse 300 Direct Drive Opener 1/2 HP 1" Shaft 110/240V 1ph 40:1 20' Cable

Advanced speed control: up to 24"/s opening up to 16"/s closing
Built-in 24V 9Ah battery backup
Soft start/stop functionality
Universal single-phase power compatibility: 110-240V 50/60Hz
Adjustable force monitoring
Programmable closing timer: 1-99s A high-performance direct-drive door operator with a 90V DC horsepowerrated motor engineered for balanced commercial and industrial doors

.......more details

PDC-300-050-1.25-40/75-20

Pulse 300 Direct Drive Opener 1/2 HP 1.25" shaft 110/240V 1ph 40:1 20' Cable

Advanced speed control: up to 24"/s opening up to 16"/s closing
Built-in 24V 9Ah battery backup
Soft start/stop functionality
Universal single-phase power compatibility: 110-240V 50/60Hz
Adjustable force monitoring
Programmable closing timer: 1-99s A high-performance direct-drive door operator with a 90V DC horsepowerrated motor engineered for balanced commercial and industrial doors

.......more details

PDC-300-050-1-40/63-20

Pulse 300 Direct Drive Opener 1/2 HP 1" Shaft 110/240V 1ph 40:1 20' Cable

Advanced speed control: up to 24"/s opening up to 16"/s closing
Built-in 24V 9Ah battery backup
Soft start/stop functionality
Universal single-phase power compatibility: 110-240V 50/60Hz
Adjustable force monitoring
Programmable closing timer: 1-99s A high-performance direct-drive door operator with a 90V DC horsepowerrated motor engineered for balanced commercial and industrial doors

.......more details

2376.182.27.950

Whiting Torsion assembly .182 wire size 27" spring length 95" shaft

This is a full balancer assembly
Twin springs one road one curb with a shaft through it

RXTA-100

Pulse 2-Channel Receiver

Two-Channel Receiver: Can be programmed to operate one or two doors or for Open/Close or Open/Stop functions.
Universally Adaptable: Works with most available brands/models of transmitters (300-390MHz) including those with rolling code.
9-30Vac/dc input.
FCC approved.

2806.177*250

Whiting Spring Assby .177 x 2-3/16 x 25" Roadside

Replacement torsion spring with cones
Specs: .171 x 2-3/16" x 25" Long
Roadside
For Curbside order part # 2807.177*250

2806.200.280

Whiting .200 x 2-3/16 x 28" Roadside with Cones

2807.177*340

Whiting Spring Assby .177 x 2-3/16 x 34" Curbside

Replacement torsion spring with cones
Specs: .177 x 2-3/16" x 343" Long
For Roadside order part # 2806.177.340

GALV-393-6-L

Cut-to-Length Torsion Spring .393 x 6" Left Hand Wound Galvanized Orange Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-600-INSTALLED
Galvanized

8086.207.320

Whiting .207 x 2-5/8 IN x 32" Roadside with Cones

An original Whiting assembly

CEDO-SPEC-ORDER

Cedo Special Order ** non-stocking items

specify size color details when ordering
Please call for pricing

GALV-243-334-144-R

Torsion Spring .243 x 3-3/4" x 12ft RH Galvanized White/Yellow

Wire size: .243
Inside diameter: 3-3/4"
Length: 12 ft
Galvanized Stenciled

26116

Doorlec Cam Retainer Plate Waterproof

2807.156.170

Whiting .156 x 2-3/16 x 17" Curbside with Cones

7176.218*29.90

Whiting Heavy Duty Torsion Assembly .218 x 29" shaft 90"

2376.156.145.550

Whiting Torsion assembly .156 wire size 14-1/2" spring length 55" shaft

2376.182.275.930

Whiting Torsion assembly .182 wire size 27-1/2" spring length 93" shaft

This is a full balancer assembly
Twin springs one road one curb with a shaft through it

111031.0001.S

Overhead Door Link Hoist Release RSX

Hoist link for the Overhead Door RSX (rolling steel - hoist) commercial operator

LJHW-383-1/2

Doorlec Ind Jackshaft Op. Watertight ECB 1/2 HP 208V-3Ph

Heavy-Duty Industrial Operator with Waterproof Mod. for Sectional or Rolling Steel Doors
DC-2000 logic with adjustable Timer-To-Close Delay On Reverse and Traffic Light Control (monitored board optional)
Solenoid Brake prevents coasting and secures the door when closed
TEFC (sealed) continuous duty electric motor with overload protection
Automatic Friction Clutch protects the door and operator
Self-aligning Heavy Duty sealed Pillow Block bearings on all shafts for high cycle applications

.......more details

CDOPCK

LiftMaster 850LM with 5 x 813LM Remotes

610.5600.3

Whiting Panel Option for Stainless Steel 5600.3 HD Bottom Roller Brackets

This is an upgrade option when purchasing a door or bottom panel

K18-10931

LiftMaster Compression Spring

Also known as: 187009 G187009 1810931 18-10931 18-7009

2376.200.30.850

Whiting Torsion assembly .200 wire size 30" spring length 85" shaft

SL585503UL

LiftMaster Industrial Slide Gate Op.1/2 HP 208/230/460V 3 Phase - Heater NOT Incl. ***NLA

High-Starting Torque continuous-duty motor (available in 1/2 1 and 1 1/2 HP)
Operator Duty Rating: 20 cycles per hour
Wormgear Reduction: 20:1 Wormgear Reducer
Adjustable Friction Clutch: helps to protect gate and operator from damage should the gate meet an obstruction
Chain: #50 nickel-plated (25ft. supplied)
Chassis: heavy-duty steel chassis and lockable powder-coated steel cover withstands extreme and harsh environments

.......more details

NEW-HAMP-R12

Garex Ready to Install Door Special Order

R12 Insulation - Short Panel with vertical lines carriage style - Panel spacing to accomodate decorative hinges and handles - Available in steel white and black - A variety of decorative windows can be added - Custom colours can be factory painted - Multiple hardware configurations are available to accomodate site requirements

URBAN-R12

Garex Ready to Install Door Special Order

R12 Insulation - Woodgrain with 1 narrow shadow line at the top and bottom of each panel - Available in steel white or black - A variety of decorative windows can be added - Custom colours can be factory painted - Multiple hardware configurations are available to accomodate site requirements

39153R.S

Genie Optical Encoder AC Screw Drive Models

Compatible with models; 2562 2564 2568 PowerLift® GPower 900
Also called the RPM sensor it is used to resolve the issue of short travel problems or drifting limits on the garage door opener.
Single & Dual encoder

2704.135.140

Whiting Roadside Torsion Spring 2-3/16" ID 14" Long

Torsion spring wire only
.135 wire size

K72-33889

LiftMaster Clutch Shaft Kit

Clutch Shaft Kit for MJ Jackshaft Operators
Complete with: Clutch Plate Clutch Shaft Bearing Sprocket 5L Belt Motor Pulley Spring Clutch Disk Shim Washers Castle Nut Flatwashers Cotter Pin Roll Pins and Push on Fastener
Same as 308117101K 310115111 K7212589 K72-12589 71116121J

MH00019

Micanan Precision Bearing 3/8" ID ** Replaced by MH00096

MK-00137

Micanan Transformer 600V-24V-100VA

2806.206.325

Whiting .206 x 2-3/16 x 32-1/2" Roadside with Cones

TB406-36SF

Steel Faced Laminated Bumper Black 6" x 36" 5 1/4" Projection Horizontal Installation

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required
“Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

BTM-BK-PCG/PR

Powdercoated Commercial 3" LHR Bottom Brackets Grey Sold as a Pair (L & R) *** No Longer Available

EZ123 UPWARDOR
Powdercoated grey
Use with: 3" straight track
Sold as a pair (includes one left and one right).

2807.139*130

Whiting Spring Assby .139 x 2-3/16 x 13" L Curbside

Replacement torsion spring with cones
Specs: .139 x 2-3/16" x 13" Long
For Roadside order part # 2806.139.130

2807.206.325

Whiting .206 x 2-3/16 x 32-1/2" Curbside with Cones

2376.156.17.770

Whiting Torsion assembly .156 wire size 17" spring length 77" shaft

2376.200.30.890

Whiting Torsion assembly .200 wire size 30" spring length 89" shaft

SOLID_SHAFT_13'

Solid Shaft 1" Keyed 13 ft Galvanized

Actual length is approx. 13'-1"

ZT37028235

Firestar Shutter 540 Galv with Lock & Key

CABLE008

Manaras Disconnect Cable 25 ft

Cable 3/32"

9301644400

Galvanized Torsion Spring .306 x 3-3/4 x 44" L with Cones RHW

H101L5-RH

LiftMaster Ind. Duty Hoist Op. 1 HP 115/230 VAC Logic 5 Right Hand W/Brake ***No Longer Available

Includes CPS-U
H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door.
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.

.......more details

Installation Manual Manuel d'installation Sell sheet Brochure

UNI-100-162

Uni-Size Bottom Weather Seal 16'2" Long *To extent of inventory*

Fits most standard doors 1-3/8" thru 2" thick
Pliable in all temperatures
Accepts pneumatic or electrical edge
15 pieces per box

MV-00024

Micanan 4-Door O/C/S Transmitter CT-4 313 MHz ** Discontinued

Programming Instructions

CBB332

Stop & Sleeve 3/32" 100 pair

Includes 100 stops and 100 oval sleeves

GTS-16

Garaga Top Seal Single-Fin Black 16ft ** To Extent of Inventory

Thermoplastic resin weatherseal co-extruded.
For Commercial / Residential applications
Screws directly to the top of door no retainer required

MDRG

Linear 1-Channel MegaCode Gate Receiver 318 MHz *** Discontinued

Activates one gate or device
Supplied with F-connector and whip antenna
Mounting bracket supplied
Memory: storage for up to 40 MegaCode transmitters
Power: 24 VAC/VDC
Codes: 1000000+ (MegaCode format)

.......more details

Programming Instructions

RADIO-31

Manaras MCR-32 Open/Stop/Close 24V receiver Nema 4/12 313 MHz *** Repl. by RADIO-RE901B

3-Channel O/C/S receiver controls one operator with MCT series transmitters.
Steel Nema 4 enclosure.
24 VAC input voltage.
2 N/O and one N/C relay
Commercial antenna Included (Radio029).

Programming Instructions - ECB Programming Instructions - CONT

.468_6"-RH

Torsion Spring .468 x 6" x 12ft RH Blue/Orange **NLA

Wire size: .468
Inside diameter: 6"
Length: 12 ft

K94-36891

LiftMaster Battery Wiring Harness 7AH

For use with various LiftMaster® Linear Actuator Residential / Commercial Swing Gate Operators

2376.192.29.910

Whiting Torsion assembly .192 wire size 29" spring length 91" shaft

This is a full balancer assembly

.207-3-9-LHW

Mini Storage Spring .207 x 3" x 9" long Left Hand

Examples of ends on mini storage springs

RCB-TIP

Roller Chain Break Replacement Tip Only *** No Longer Available

Replacement tip only for RCB-2560

MP-00002-575V

Micanan Apartment Feature: Timer-to-Close Function and Light Control Modification only

Controlling action of two lights- sockets supplied on cover

2376.177_27.830

Whiting Torsion assembly .177 wire size 27" spring length 83" shaft

2376.206.30.930

Whiting Torsion assembly .206 wire size 30" spring length 93" shaft

9372263800

Square Torsion Spring .375 x 6 x 38" with Cones LHW 1-1/4" Bore

SOLID_SHAFT_24'

Solid Shaft 1" Keyed 24 ft Galvanized

Maximum length for a solid shaft is 24ft
Actual length is approx. 24'-1"

SOLID_SHAFT_12'

Solid Shaft 1" Keyed 12 ft Galvanized

Actual length is approx. 12'-1"

H505L5-LH

LiftMaster Ind. Duty Hoist Op. 1/2 HP 575 VAC 3 Ph Logic 5 Left Hand **No Longer Available

Includes CPS-U
H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door. Connectivity
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.

.......more details