Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home Your Search Commercial Door
OPJ-6532-ECB

Manaras Heavy-Duty Jackshaft Operator 1/2 HP 600V 3 Ph with Elect Circuit Board

  • An industrial operator designed for use on standard high and vertical lift sectional doors
  • Can also be used on rolling doors and grills
  • It incorporates a floor level disconnect mechanism for manual operation
  • 25 cycles per hour 100 cycles per day
  • Continuous-duty single phase capacitor start or 3 phase motor open drip proof
  • Mechanical brake
  • #50 roller chain and sprocket on final drive
  • Full overload protection
Installation ManualSell Sheet
LEVER056

Manaras Disconnect Lever

  • Works on newer model MJH
V1104-WHITE

Replacement Vinyl Only for 1104-White 200ft Roll

  • Sold in 200 ft rolls only
27175B

Genie Carriage Slide Only

  • Carriage NOT included. Carriage part number 20462R
  • Compatible with Genie GPS and PMX belt drive models
9150000629

3/16" Stops ONLY 100/pkg

  • Stops only 100 per pack
34538R

Genie Up Limit Switch Assembly 66" Wire

  • For up direction on a ChainGlide System using magnetic limits
  • For models: 350ML 500ML 700ML 800ML and other ML Series ChainGlide door openers
  • Also for Overhead Door Python ChainGlide garage door openers
  • 66" inches of wire attatched
7001-8-W/B

Commercial Side & Top Weather-Strip 8' Long - White and Black (WB)

  • White galvanized steel with black dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
  • Full case quantity only (20)
18007

Doorlec Reducer BHC-63 5/8' or 7/8" Input

  • Gearbox for GH operator
735

Fasteners Flat Washer 3/8" USS Zinc 1000/Box

  • ID: 0.40625’’
  • OD: 0.8125’’
  • THK: 0.066’’
733

Fasteners Flat Washer 5/16" Zinc 1000/Box

MTAW22B-R

Miller Edge MT22 Air Wave Black Right Hand Sold by the Foot

Installation ManualSell Sheet
H8064HCLL

Polycarbonate Hinged Enclosure Clear Cover Locking Latch

  • Dimensions: 8 x 6 x 4
  • Stainless Steel locking latch
  • Nema 4X
BL229-ARM-12-R

Automatic Systems Aluminum Barrier Gate Arm 12 ft Round

.343-5-1/4-SQ-L

Cut-to-Length Square Wire Torsion Spring 31" long with Cones Left Hand

754

Fasteners Self Drill & Tap Tek Screw 5/16-12 x 1" (#4PT) 1000/Box ** NLA Offer 108207

  • Indented Hex Washer Head
  • 7/16" Head
  • Max RPM = 2000
G65-19084

LiftMaster Thermostat Control Heater Fin Type for 208V-460V Gate Operators ** Discontinued

  • Heater used in BG type gate operators
Installation Manual
BT505L5

LiftMaster 1/2 HP 575V 3p Commercial Trolley Operator with a Brake Logic 5

  • Low profile trolley operator with brake installed
  • Comes with #48 roller chain
Installation ManualManuel d'InstallationSell sheetBrochure
T755L5

LiftMaster 3/4 HP 575V 3p Commercial Trolley Operator Logic 5 ***No Longer Available

  • Low profile trolley operator with brake included
Installation ManualManuel d'InstallationSell sheetBrochure
763

Fasteners Flat Head Carriage Bolt 1/4-20 x 2-1/4" 1000/Box

  • Full length thread
  • Max torque = 6
794

Fasteners Keps Nut 5/16-18 1000/Box

  • Lockwasher & nut combination
41A5389-1E

LiftMaster Receiver Logic Board

  • For low profile screw drive models with one light
  • Fits models 2110 2220
Replacement Instructions
99554NYHNG

Nylon Hinge Black #4 *** To extent of inventory

  • Equivalent to 14-ga in strength.
MV-00025-OLD

Micanan 32-Door O/C/S Transmitter CT-32 313 MHz OLD STYLE Deep Buttons *** NLA repl by new style

  • Commercial / Industrial transmitter
SSZP12-6

Solid Shaft 1" Keyed Zinc Plated 12'-6"

K72-16421

LiftMaster Limit Shaft Assembly LGO****Discontinued and no Longer available

  • Assembly includes: Limit shaft Limit nut Sprocket Roll pin Bushing E-Ring and Chain.
Installation Manual
H755L5-LH

LiftMaster Ind. Duty Hoist Op. 3/4 HP 575 VAC 3 Ph Logic 5 Left Hand

  • Includes CPS-U
  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door. Connectivity
  • MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
    • .......more details
Installation ManualManuel d'InstallationSell sheetBrochure
K21-36793

LiftMaster Transformer 208-230/460 Volts 20Va

  • 230/460V PRIMARY 24V SECONDARY 20VA
K001C8103-1

LiftMaster L5 Antenna

MOUNTSHAFT007

Manaras Clutch Shaft Kit for MTBH with 5/8" Shaft

  • For operators made with a 5/8" shaft
  • For very old model MTBH built with 1" shaft - use part number MOUNTSHAFT017
Drawing
178B34

LiftMaster Straight Door Arm

  • Will work with most residential garage door openers
  • Also known as: 012385041783 178B33 178B34 4178B0034B
41DB001-1

LiftMaster Circuit Board Assembly

  • For belt drive unit model 3500 (315MHz)
  • Assembly includes: Board end panel and light socket
  • Also known as 041DB001-1C
7001-18-SANDSTN

Commercial Side & Top Weather-Strip 18' Long - Sandstone (D)

  • Sandstone galvanized steel with sandstone dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
  • Also known as Taupe
  • Full case quantity only (10)
7001-9-SANDSTNE

Commercial Side & Top Weather-Strip 9' Long - Sandstone (D)

  • Sandstone galvanized steel with sandstone dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
  • Also known as Taupe
  • Full case quantity only (20)
7001-8-SANDSTNE

Commercial Side & Top Weather-Strip 8' Long - Sandstone (D)

  • Sandstone galvanized steel with sandstone dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
  • Also known as Taupe
  • Full case quantity only (20)
V1104-GREY

Replacement Vinyl Only for 1104-Grey 200ft Roll

  • Sold in 200 ft rolls only
1104-10FT-CHARC

Residential Side & Top PVC Weather-Strip with cap 10' Long - Charcoal (H)

  • Charcoal rigid vinyl retainer with charcoal flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
1104-8FT-CHARCL

Residential Side & Top PVC Weather-Strip with cap 8' Long - Charcoal (H)

  • Charcoal rigid vinyl retainer with charcoal flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
MK00785-RATED

Explosion Proof Killark Labeled 3-Btn Pushbutton Control Station

  • CSA and UL labeled station
  • Three button O/C/S Nema-7/9
  • Surface mount
1104-16FT-GREY

Residential Side & Top PVC Weather-Strip with cap 16' Long - Grey (G)

  • Grey rigid vinyl retainer with grey flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
41A7619-5

LiftMaster Cover for 8355

2705.177_270

Whiting Curbside Torsion Spring 2-3/16" ID 27" Long

  • Torsion spring wire only
  • .177 wire size
2704.171_250

Whiting Roadside Torsion Spring 2-3/16" ID 25" Long

  • Torsion spring wire only
  • .171 wire size
NTE5326

Bridge Rectifier 25A 600V

  • Bridge Rectifier Converts AC to DC voltage
  • For powering DC accessories when AC transformer present
  • Small size with convenient mounting hole in center
  • Same as MCCM2506-RH
Characteristics
EL25N

LiftMaster Telephone Entry System Nickel

  • Capable of accepting up to 2000 codes
  • 4 assignable and programmable built-in relays
  • Mounting versatility and available in 3 colors: Gray Nickel or Silver
Installation ManualSell Sheet
MU22-2WIRE-RH-B

Miller Edge MU22 2-Wire Right Hand Black - Sold per Foot

  • €¢Electromechanical edge for sectional doors and aircraft hangars. •The MU22 is a custom edge manufactured to exact specifications. •The MU22 is completely flexible and will contour to curved surfaces. It's profile can also be square rectangular or angled. •Touch sensitive signaling allows immediate reversal or stopping of motion. •Temperature range: -30F to 155F •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •Vertical or horizontal mount •ANSI/UL325 recognized component •One year warranty
Installation ManualWorksheetSell Sheet
22405-KEYLOCK

Doorlec Weatherproof Pushbutton O/C/S Key Lock with On/Off Switch

41A6118

LiftMaster Travel Module (3800) *** No longer available To extent of inventory

  • Fits model 3800 confirmed with LiftMaster Tech support.
Programming Instructions
13-3510*

LiftMaster Chain Guide ***NLA

  • This is NLA as a part by itself but may be purchased in a kit K75-18493
36179R

Genie Traveler Assembly for Screw Drive

  • Fits model 3060 L/M
  • Replaces: 25589R 25589S 25589C 20414R 34107R 20073R & 24357R
K74-31243

LiftMaster Kit SVC MOV

02-401

Push Button Control Station 1-Button Surface Mount NEMA 1

  • Die-cast metal enclosure
  • START may be used as OPEN with all LiftMaster operators.
  • May be used as OPEN and CLOSE on all operators with type B2 control wiring
1013-1-1/4-14'

Rigid Vinyl Bottom Retainer L-Shaped 14' Long

  • For door thickness: 1-1/4"
K75-18364

LiftMaster Arm Assembly Kit for SW470

  • Complete arm kit for SW470 gate operator
10FT-TROLLEY-SET

LiftMaster 10' Track Set for Trolley Operator 10-5810-P (2 pcs) *Actual length 155"*

  • Actual Length 12' 11"
  • Includes 2 pieces of 10-5810-P
SHAFT034

Manaras Clutch (Input) Shaft for MJH

  • MJ INPUT SHAFT 5/8-24X12
50-105

LiftMaster Black Coil Cord 4-Wire 18-ga 20 ft. Extended Curly Cord

MK-00060

Micanan Timer Plug-In Type 0-10min 24V 8-Pin (MK00481)

Programming InstructionsAdding a timer
TUBE_SHAFT_9FT

Hollow Shaft 1" x 9'-10" Galvanized 16 gauge

MX00147-NEW

Micanan Complete Clutch Kit for PRO-TB New Style Frame (MX00211)

  • After January 2006
  • 8" Diameter pulley
  • Feb 2017 - new part number MX00211
.225-258-L

Cut-to-Length Torsion Spring .225 x 2-5/8" Left Hand Wound Orange/Green

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
.207-258-R

Cut-to-Length Torsion Spring .207 x 2-5/8" Right Hand Wound Brown

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
02-407

LiftMaster Key Switch Assembly On/Off Nema 4/12

  • Two-position keyswitch. Key removable in either position.
  • Surface Mount
  • May be used on all operators
  • Die-cast metal enclosure non-tamperproof
.262-134-R

Cut-to-Length Torsion Spring .262 x 1-3/4" Right Hand Wound Red/Yellow

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
20-2LMC

LiftMaster 2-Strand Bell Wire 500ft White/Red

  • 2 strand 22 gauge tin-dipped copper hook-up wire
  • Color coded White & White/Red wires
CR2016

Maxcell/Renata 3V Lithium Button Cell

CR2032

Maxcell/Renata 3V Lithium Button Cell

ME123-YELLOW-LH

Miller Edge Yellow Left Hand Outlet 2-Wire 2" wide x 1-1/2" high Sold by the Foot

  • Electromechanical slide in edge for sectional doors and sliding gates.
  • Touch sensitive singaling allows for immediate stopping and reversing of motion
  • Temperature range: -30F to 155F
  • Lead wire: 22 gauge universal
  • Sensitivity: nominal 6-8 PSI
  • 2 wire NO configuration
    • .......more details
Installation ManualWorksheetSell Sheet
ME123-BLK-LH

Miller Edge Black Left Hand Outlet 2-Wire 2" wide x 1-1/2" high Sold by the Foot

  • Electromechanical slide in edge for sectional doors and sliding gates.
  • Touch sensitive singaling allows for immediate stopping and reversing of motion
  • Temperature range: -30F to 155F
  • Lead wire: 22 gauge universal
  • Sensitivity: nominal 6-8 PSI
  • 2 wire NO configuration
    • .......more details
Installation ManualWorksheetSell Sheet
ME113-C3

Miller Edge PVC Mounting Channel "L" Shape Sold by the Foot

.273_3-3/4"-LH

Torsion Spring .273 x 3-3/4" x 12ft LH Orange/Red

  • Wire size: .273
  • Inside diameter: 3-3/4"
  • Length: 12 ft
.283_2-5/8"-LH

Torsion Spring .283 x 2-5/8" x 12ft LH White

  • Wire size: .283
  • Inside diameter: 2-5/8"
  • Length: 12 ft
.273_2-5/8"-LH

Torsion Spring .273 x 2-5/8" x 12ft LH Orange/Red

  • Wire size: .273
  • Inside diameter: 2-5/8"
  • Length: 12 ft
.243_1-3/4"-LH

Torsion Spring .243 x 1-3/4" x 12ft LH White/Yellow

  • Wire size: .243
  • Inside diameter: 1-3/4"
  • Length: 12 ft
.207_1-3/4"-LH

Torsion Spring .207 x 1-3/4" x 12ft LH Brown

  • Wire size: .207
  • Inside diameter: 1-3/4"
  • Length: 12 ft
24-24-1

LiftMaster Relay 24VAC 8-Pin DPDT Flange

41B0139

LiftMaster MVIS Motor Isolators 4/box

41A5483-1C

LiftMaster Circuit Board Assembly *** Discontinued

  • Assembly includes: Circuit board and end panel
  • For chain drive units with one light
  • Fits models 2245 & 2255
  • Last letter of the part # indicates revision date the most recent product will be sent out
  • Also known as 41A5483-1 41A5483-1B
T-53-S

FL-Allstar 3-btn 27-Door O/C/S Transmitter 107475-311 MHz ***NLA

  • This remote can control (open-close-stop) up to 27 doors.
  • It has a eight switches encoder with three positions: + 0 and - .
  • Manufacturer's model number: 535T (190-107475)
  • Dimensions: 6 1/4" x 3 3/8" x 1 3/8"
Programming Instructions
.393_6"-RH

Torsion Spring .393 x 6" x 12ft RH Orange

  • Wire size: .393
  • Inside diameter: 6"
  • Length: 12 ft
.343_6"-RH

Torsion Spring .343 x 6" x 12ft RH Blue/Red

  • Wire size: .343
  • Inside diameter: 6"
  • Length: 12 ft
.306_6"-RH

Torsion Spring .306 x 6" x 12ft RH Red

  • Wire size: .306
  • Inside diameter: 6"
  • Length: 12 ft
.437_5-1/4"-RH

Torsion Spring .437 x 5-1/4" x 12ft RH Red/Green

  • Wire size: .437
  • Inside diameter: 5-1/4"
  • Length: 12 ft
.437_3-3/4"-RH

Torsion Spring .437 x 3-3/4" x 12ft RH Red/Green

  • Wire size: .437
  • Inside diameter: 3-3/4"
  • Length: 12 ft
.319_3-3/4"-RH

Torsion Spring .319 x 3-3/4" x 12ft RH Blue/Green

  • Wire size: .319
  • Inside diameter: 3-3/4"
  • Length: 12 ft
.331_3-3/4"-RH

Torsion Spring .331 x 3-3/4" x 12ft RH Red/White

  • Wire size: .331
  • Inside diameter: 3-3/4"
  • Length: 12 ft
.306_3-3/4"-RH

Torsion Spring .306 x 3-3/4" x 12ft RH Red

  • Wire size: .306
  • Inside diameter: 3-3/4"
  • Length: 12 ft
.262_3-3/4"-RH

Torsion Spring .262 x 3-3/4" x 12ft RH Red/Yellow

  • Wire size: .262
  • Inside diameter: 3-3/4"
  • Length: 12 ft
.243_3-3/4"-RH

Torsion Spring .243 x 3-3/4" x 12ft RH White/Yellow

  • Wire size: .243
  • Inside diameter: 3-3/4"
  • Length: 12 ft
.250_3-3/4"-RH

Torsion Spring .250 x 3-3/4" x 12ft RH Green

  • Wire size: .250
  • Inside diameter: 3-3/4"
  • Length: 12 ft
.225_2"-RH

Torsion Spring .225 x 2" x 12ft RH Orange/Green

  • Wire size: .225
  • Inside diameter: 2"
  • Length: 12 ft
.192_2"-RH

Torsion Spring .192 x 2" x 12ft RH Silver

  • Wire size: .192
  • Inside diameter: 2"
  • Length: 12 ft
.243_1-3/4"-RH

Torsion Spring .243 x 1-3/4" x 12ft RH White/Yellow

  • Wire size: .243
  • Inside diameter: 1-3/4"
  • Length: 12 ft
CP-BRAKE-ASSBLY

Lynx Brake Shoe Assembly

  • Brake shoes for all Lynx operators
  • Assembly includes the shoes
  • release spring and bolt included
T2B-DS

Lynx 2-btn Transmitter Dip Switch 303 MHz

  • Ultra secure mid-size transmitter with 8 dip-switches for coding
  • 2-buttons provides control for 2 Lynx operators
  • Compatible with HomeLink in-vehicle remote control
  • Can be mounted on visor with saddle clip or carried on a keychain
  • Visor clip and 12V battery included
  • Will work with Lynx residential operators built from 2000 and up.
    • .......more details
Compatibility chart
H14G04

Hinge #4 x 14 gauge

  • Bright zinc plated 14-gauge steel hinge
  • For use with 7/16" diameter stem rollers
  • Full body hinge 2-3/4" wide
  • #4 position
  • Use between sections 4 and 5
  • Same as part number 244
    • .......more details
MOUNTSHAFT001

Manaras Clutch Shaft Kit for MJH (pre-1998)

  • Input / clutch shaft kit for MJH models up to mid-1998
  • Kit includes V-belt 4L360 to fit with newer deeper pulley
  • For MJH built after 1999 use MOUNTSHAFT001A
Drawing
DRUM006

Manaras Steel Brake Drum Flat Track - replaces DRUM001

  • Replaces DRUM001
  • Brake drum for all operators except Gear Head models prior to 1999.
  • Use with BRAKEPART018
RADIO-37

Manaras MCR-32 Open/Stop/Close 24V receiver Nema 1 313 MHz ** To extent of Inventory

  • 3-Channel O/C/S receiver controls one operator with MCT series transmitters.
  • Steel Nema 1 enclosure.
  • 24 VAC input voltage.
  • 2 N/O and one N/C relay
  • Commercial antenna Included (Radio029).
  • Replaced by RADIO-RE900A
    • .......more details
Programming Instructions - ECBProgramming Instructions - CONT
RADIO-29

Manaras Commercial Receiver Antenna

  • Commercial receiver coaxil antenna
2237.096

Whiting Coldsaver Intermediate Panel 13-1/2" x 96"

  • Fits Coldsaver Roll-Up Doors
  • 1-1/8" thick 96" wide