Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home Your Search Doorlec
ME120-BLK-E-5FT

Miller Edge 2-Wire Black End Outlet 5 ft Long

  • Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
  • Touch sensitive signaling
  • Temperature range: -30F to 155F
  • Lead wire: 18 gauge 2ft length
  • Sensitivity: nominal 4 PSI
  • 2 wire NO configuration
  • Vertical or horizontal mount
  • ANSI/UL325 recognized component
  • Mounting channel sold separately
  • One year warranty
Installation ManualSell Sheet
MP00013

Micanan Up-Charge Track and #410 (#48) chain for 14' h Door *Actual length 198"*

  • For 1/3 HP and 1/2 HP operators only
4X3PO50

Devanco Loop 4' x 3' pave-over 50' lead-in

  • Ideal for use on with gravel driveways or surfaces that are to be asphalted
  • Features a twisted lead-in to reduce the chances of interference and false detections.
  • Direct burial loops should be buried approximately 6" deep
Installation InstructionsInstructions d'installationSpec SheetBrochureLoop Placement GuideGuide de positionnement des boucles
USVD-4X

EMX Ultra Sonic Vehicle Detector

  • The USVD-4X Drive Thru Vehicle Sensor uses patent pending Triangular Planar Array (TPA) technology to detect the presence of a vehicle.
  • The USVD handles any drive thru operation such as fast food banking pharmacies car washes and parking garages.
  • The USVD is simply mounted on a post or order box and aimed at the location where a vehicle would pass to initiate a transaction. No set-up or adjustments required.
  • Aux. relay settings for pulse on ENTRY EXIT or BOTH
  • Output delay option for 1 2 and 4 seconds
  • Operating range: 1ft. – 5ft.
    • .......more details
Installation ManualSell Sheet
PD180CBT30MU

Carlo Gavazzi Photoelectric Through-Beam Emitter 30M

  • Emitter only. If receiver is required order PD180CBT30Q
  • For Industrial doors and Gates
  • Range: 30M
  • Relay output
  • Supply voltage emitter: 2 x 3.6VDC lithium batteries
  • Dimensions: 180m x 51 x 49m
    • .......more details
Installation Manual
K72-12487

LiftMaster Limit Shaft Kit MT BMT MJ mechanical operators

  • For models MT BMT MJ mechanical operators
  • Includes limit shaft bearings limit nut sprocket. RPM sensor roll pin & e-ring
75-10359

LiftMaster Brake Pad

  • same as K75-10359
  • For MJ / HMJ and MT / BMT operators
PRO-HBH-7511U-L

Micanan 3/4HP 115V 1P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Left Hand (Pro-HHD)

  • 3/4 HP115V 1PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
  • Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
  • N-1 Through-beam (MK-00649) photocells included. Other options available.
  • 3-btn O/S/C (02-103) wall control station included
  • Adjustable Friction Clutch 5L320 drive belt
  • #50 Roller chain 18 tooth door sprocket included
    • .......more details
271723

Rolling Steel Slide Bolts for Bottom Bar D679

E076

Rolling Steel Aluminum Bottom Bar 679 Extrusion Sold per Foot

SLT14-20P

Rolling Steel 3" Flat Slat 20-ga Primed

SLT2-20P

Rolling Steel 2" Crowned Slat 20-ga Primed

GH153-L5

LiftMaster Gearhead with Brake 1-1/2 HP 208/230/460V 3P L5

  • Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
  • GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
  • MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
  • Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
  • Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.
    • .......more details
Installation ManualManuel d'InstallationSell sheetBrochure
GH755-L5

LiftMaster Gearhead with Brake 3/4HP 575V 3P L5

  • Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
  • GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
  • MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
  • Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
  • Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.
    • .......more details
Installation ManualManuel d'InstallationSell sheetBrochure
.234-2-LH-C

Torsion Spring .234 x 2" x 144" LH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .234 ID: 2" Length: 12 ft
.192-1-3/4-RH-C

Torsion Spring .192 x 1-3/4" x 144" RH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .192 ID: 1-3/4" Length: 12 ft
BK101/PR

Spring Anchor Bracket USA 8-Gauge sold as a pair

  • Universal spring anchor brackets - Residential/Commercial
  • Centerline adjustment: 3-5/16" to 6-3/4"
  • Bright zinc plated 8 gauge steel
  • No bearing
  • Bearing R5110 sold separately
RN0024-SS

Roller 2" White Nylon 4-1/2" Stainless Steel Stem Double Sealed Bearing

  • A supreme double sealed bearing roller that never requires lubrication
  • Ideal for high usage and high moisture areas ie..carwash
  • 7/16" stainless steel shaft.
  • 200 lb load 50000 cycles
  • UHMW tire
029C98200

W-Style Complete Replacement Door White Stainless Steel Package 029C98200

  • Manufactured to exact size fully assembled tracking and spring assembly included.
  • 98" w x 100" h
  • Price varies according to size
Q311

LiftMaster Surge Protection for Master / Second *** No Longer Available

  • For the Miracle-One two arm gate operator - master/ slave
  • Same as part no. K74-50329
K1D6597-1CC

LiftMaster Control Board with Heat Sink CSL24V & CSL24VH

  • Control board for CSL24V and CSL24VH gate operators
  • 014D1058M
.187-2-R

Cut-to-Length Torsion Spring .187 x 2" Right Hand Wound

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
.319-334-L

Cut-to-Length Torsion Spring .319 x 3-3/4" Left Hand Wound Blue/Green

  • Priced per inch. Cones sold separatly.
  • For factory installed cones order part # C-334-Installed
9150000627

1/8" Stops ONLY 100/pkg

  • Stops only 100 per pack
SPREADER003

Chain Tensioner for 1-1/4" / 1-1/4"

  • Chain spreader for installation with 1-1/4" operator shaft and 1-1/4" door shaft
  • Designed to keep tension on the chain when used with a wall mount commercial operator. It helps avoid premature wear on the door shaft bearing and commercial operator output shaft bearing
Installation instructions
OGH-6235-ECB

Manaras 1-1/2 HP 208V 3Ph Gear Head Operator with Elect. Circuit Board

  • A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
  • Includes a self-engaging chain hoist for manual operation
  • 25 cycles per hour 80 cycles a day
  • Hoist on right side standard can easily be moved to the left in field
  • Full overload protection
  • BRACKET112 must be used for wall mounting
    • .......more details
Installation ManualSell Sheet
27024

Doorlec Electric Motor TEFC 3/4HP 115/230V DC403

  • ase mount
Wiring diagram for 120VWiring diagram for 230V
OHJ-6533-ECB

Manaras Heavy-Duty Jackshaft Operator 3/4 HP 600V 3 Ph with Elect. Circuit Board

  • 25 cycles per hour 100 cycles per day
  • An Industrial duty operator featuring both the patented Hoist-a-Matic a self-engaging chain hoist for manual operation as well as a floor level disconnect
  • Specifically designed to motorize grills when a manual egress is required
  • Mechanical brake
  • Hoist on right standard
  • Full overload protection
    • .......more details
Installation ManualSell Sheet
OPH-6433-ECB

Manaras Opera-H 3/4HP 480V 3Ph with Electronic Circuit Board

  • A heavy-duty industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a self-engaging chain hoist for manual operation
  • Clearence: side room required 15"
Installation ManualSell Sheet
OPJ-6114-ECB

Manaras Heavy-Duty Jackshaft Operator 1 HP 120V 1 Ph with Elect Circuit Board

  • An industrial operator designed for use on standard high and vertical lift sectional doors
  • Can also be used on rolling doors and grills
  • It incorporates a floor level disconnect mechanism for manual operation
  • 25 cycles per hour 100 cycles per day
  • Continuous-duty single phase capacitor start or 3 phase motor open drip proof
  • Mechanical brake
    • .......more details
Installation ManualSell Sheet
OMH-6112-ECB-LH

Manaras Medium-Duty Jackshaft Op. 1/2 HP 120V with Elect. Circuit Board Left Hand

  • Designed for use on standard high and vertical lift sectional doors
  • Can also be used on small rolling doors and grills
  • Single phase intermittent-duty motor has instant reverse and internal automatic reset thermal overload protection
  • Mechanical brake
  • Hoist-a-matic self-engaging hoist for manual chain operation
  • Hoist on Right Hand is standard
    • .......more details
Installation manualSell sheet
MODKIT065B

Manaras Trolley Hoist #41 Brake Release Kit Includes 12' Shaft

  • Modification kit for in-field upgrades
K76-36398

LiftMaster Electric Motor 1/2HP 24VDC for CSL24V / CSW24V

  • Replacement motor with improved brush assembly for CSL24V and CSW24V gate operators
OPH-6212-ECB

Manaras Opera-H 1/2HP 240V 1Ph with Electronic Circuit Board

  • A heavy-duty industrial jackshaft operator.
  • For use on Standard High and Vertical Lift sectional doors.
  • Can also be used on Rolling doors or Grilles.
  • Comes with a self-engaging chain hoist for manual operation.
  • Clearence: side room required 15"
  • 25 cycles per hour 100 cycles per day
    • .......more details
Installation ManualSell Sheet
37845R

Genie Screw Drive Carriage Assembly

  • Compatible with the following models: GPower 900 TriloG 1200 TriloG 1500 PowerMax 1200 PowerMax 1500
  • Works with Screw Drive Shuttle assembly part # 36664R - sold seperately
27175B

Genie Carriage Slide Only

  • Carriage NOT included. Carriage part number 20462R
  • Compatible with Genie GPS and PMX belt drive models
75W-RS-BULB

Rough Service Bulb 75W ** Disc. to extent of inventory

35616R

Genie Dual Frequancy Intellicode Receiver Board

  • For models: PCG500ML PCG700ML GCG350ML 2020L
  • Works on 315Mhz and 390Mhz
34538R

Genie Up Limit Switch Assembly 66" Wire

  • For up direction on a ChainGlide System using magnetic limits
  • For models: 350ML 500ML 700ML 800ML and other ML Series ChainGlide door openers
  • Also for Overhead Door Python ChainGlide garage door openers
  • 66" inches of wire attatched
82-NH25-03

LiftMaster Set Screw only

  • For 1/4-20-03
104100

FAAC Hydraulic Swing-Leaf Gate Operator S450H 24VDC

  • Hydraulic operator for residential and condominium swing gates with single-leaf max width of 3 m (SB) and 2 m (CBAC).
APOW3

LiftMaster Transformer 120V input 34VDC output

  • Plug-in AC/DC converter
  • Used as a replacement transformer for all LA400 models
19-5114

LiftMaster Trolley Chain Pack #41 for 14ft Door

  • For 3/4 & 1 HP trolley operators
MA025

LiftMaster Padded Barrier Arm Yellow 12ft

  • For use on Mega-Arm gate operator
Additional arm accessories
GH103-L5

LiftMaster Gearhead with Brake 1 HP 208/230/460V 3-Phase Logic 5

  • Includes CPS-U photoeyes
Installation ManualManuel d'InstallationSell sheetBrochure
831T

Allstar Stationary TransmitterO/C/S 3-Btn 1-Door 318 MHz 107483 *** To extent of inventory

  • Open/Close/Stop stationary remote for 1 door.
  • Designed for commercial automatic door and gate operator applications.
  • This transmitter can operate a single receiver connected to one operator
  • Compatible with 3-channel Allstar and MVP receivers
  • Easy access to battery and coding switch
  • Power: 9-volt battery
    • .......more details
Programming Instructions
BL229-ARM-12-R

Automatic Systems Aluminum Barrier Gate Arm 12 ft Round

MWR12

Miller Edge 1-Channel Receiver RF 318 MHz *** To Extent of Inventory

  • The MWR12 receiver is designed to receive information from the transmitter and relay it to the motor to stop or reverse motion if the edge comes into contact with an obstruction.
  • Power requirements: 10 to 40 VDC 10-30 VAC
  • Output: dry relay contact N/O and N/C 1A @60VAC
  • Operating temperature: -40C to 60C
  • Maximum operating distance: 100ft
  • Electrical configuration: optional N/O or N/C
    • .......more details
Installation ManualSell Sheet
771

Fasteners Lag Screw Hex Washer High Profile 5/16" x 1-3/4" 1000/Box *** Discontinued

  • 7/16" head
774

Fasteners Hex Head Bolt 5/16-18 x 3/4" 1000/Box

  • 5/16" bolt has 1/2" head
  • Max torque = 12
  • Full thread
  • Grade 2/Grade 5 depending on availability
23-2016

LiftMaster Limit Switch

  • Limit Switch for the VSL595
SSZP8-6

Solid Shaft 1" Keyed Zinc Plated 8'-6" (102")

MT22-YELLOW-LH

Miller Edge 2-Wire Pressure Sensitive Edge Sold per Foot

  • Electromechanical small profile edge for rolling steel foor applicaton. •Touch sensitive signaling allows for immediate stopping or reversing of motion. •The MT22 is completely flexible and will contour to curved surfaces. The MT22 also acts as weatherstrip. •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •2 wire NO configuration •Horizontal mount •ANSI/UL325 recognized component •One year warranty
Installation ManualWorksheetSell Sheet
K2A761

LiftMaster Coaxial Cable

  • For use with 315MHz receiver
K72-10047

LiftMaster Limit Shaft Kit T APT SD & GH 1/2 HP - 2 HP models L5

  • For models T APT SD & GH 1/2 HP - 2 HP models L5
CH751L5-RH

LiftMaster Hoist Op. with Carwash Mod. 3/4 HP 115/230 VAC Logic 5 Right Hand

  • Industrial Duty Hoist Operator with Damp Environment modification.
  • Comes with either CPS-UN4 or CPS-RPEN4 photoeyes
Installation ManualManuel d'InstallationSell sheetBrochure
41B4103

LiftMaster Service Belt Tensioner

178B34

LiftMaster Straight Door Arm

  • Will work with most residential garage door openers
  • Also known as: 012385041783 178B33 178B34 4178B0034B
CPT4

LiftMaster Passport 4-Btn Remote Control ** Discontinued

  • The CPT-4 remote operates up to four different Security+ devices.
  • Three of the four buttons can operate with a telephone entry or access control system .
  • Great for gated drives or commercial uses.
  • Passport Technology use with CPWR Wiegard Receiver.
  • Also compatible with Homelink systems
Programming Instructions
7001-7-CREAM

Commercial Side & Top Weather-Strip 7' Long - Cream 7001-CC (C)

  • Cream galvanized steel with cream dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
  • Also known as Almond
  • Full case quantity only (20)
7001-8-SANDSTNE

Commercial Side & Top Weather-Strip 8' Long - Sandstone (D)

  • Sandstone galvanized steel with sandstone dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
  • Also known as Taupe
  • Full case quantity only (20)
MB-01001

Micanan Electric Motor Only 1/2HP 110/220V 1PH

  • Base Mount motor O.D.P. FR56
  • Used on Micanan's T TB APT J EJ H EHJ HHD & SD
165-A

Fusible Link For Loads 1 to 30 lbs

  • Length is 2.625" width is .875"
  • Distance between centers is 1.75"
  • Priced per each
  • Fire rated at 165 degrees Fahrenheit
MOFT20-M14-8

Carlo Gavazzi Photoelectric Sensor Thru-Beam Transmitter

  • Maximum sensing distance is 20 meters
  • 11-pin
  • Waterproof for harsh environment i.e. water dust steam etc.
  • To be used with amplifier series S142.
  • Supplied with 15 m of shielded cable.
  • For receiver unit order part no. MOFR-M14-8.
    • .......more details
Installation Manual
41AC075-2

LiftMaster Circuit Board Assembly for Dual Capacitor Models 315Mhz ** To extent of inventory

  • Assembly includes: End panel Logic board and Light socket
  • For chain drive units with two lights ie..3575 3585 3595 PD752D and PD758D
  • Also known as 41AB075-2 41AC075-2 041AC075-2A
3X6PO50

Devanco Loop 3' x 6' pave-over 50' lead-in

  • Ideal for use on with gravel driveways or surfaces that are to be asphalted
  • Features a twisted lead-in to reduce the chances of interference and false detections.
  • Direct burial loops should be buried approximately 6" deep
Installation InstructionsInstructions d'installationSpec SheetBrochureLoop Placement GuideGuide de positionnement des boucles
CONSD24V

Reversing Contactor Struthers Dunn 24V

  • Struthers-Dunn # A275KXX90
1005-2-12'

Aluminum Bottom Retainer U-Shaped 12' Long***Actual Length 12'2"***

  • For door thickness 2"
27-20113

Truck Door W-Style Spring Assembly Roadside 33" Long

  • Wire thickness: .182
  • Spring length: 33 inches long (assembled length)
  • Inside diameter: 1.188
  • Includes cable drum and bearing assembly winding cone wound onto spring for stronger desgn and internal spring spacer.
CLUTCH-SHAFT-AS

Lynx Complete Clutch Shaft Assembly for HDC Operators 3/4" x 17-1/2"

  • Fits all HDC operators - waterproof or not.
TH827-24V

Erone 7-Day Timer 24V

  • 24V AC/DC input voltage with battery back-up
  • One "NO" contact and one "NC" Contact
  • Up to 8 ON and OFF switches a day (56 per week)
  • Easy to read LCD Display
  • Manual override button
  • Ideal to keep a gate open during the day
    • .......more details
Programming InstructionsInstructions de programmation
M3-2312

Marantec 2-Button Transmitter 315 MHz 97243/122436

  • Same as part # 65892 97243 122436
  • Includes battery CR2032
  • Made in Germany
Instructions
41A6118

LiftMaster Travel Module (3800) *** No longer available To extent of inventory

  • Fits model 3800 confirmed with LiftMaster Tech support.
Programming Instructions
CPS-OPEN4

LiftMaster Monitored Dual-Sided Photo Eyes

  • For use with sectional or rolling doors.
  • May be installed in areas exposed to rain or moisture
  • Rubberized for more durability
  • Will work on LiftMaster residential operators
Installation ManualManuel d'InstallationSell Sheet
MDT-4A

Linear 5-Channel Visor Transmitter MegaCode 318 MHz

  • Compatible with all Linear access receivers and controllers
  • Superior transmission range
  • Factory programmed MegaCode format supports over 1000000 codes
  • Unique ”Extra” top button
  • High visibility operate LED
  • Visor clip included
    • .......more details
Programming Instructions
ED-1300

Devanco Citrus Degreaser & Cleaner 425g

  • This special blend of solvents is designed to quickly and effectively loosen and dissolve grease oil and dirt from metal parts
  • Leaves no residue
  • Pleasant citrus scent
Material Safety Data SheetFiche Signalétique
02-401

Push Button Control Station 1-Button Surface Mount NEMA 1

  • Die-cast metal enclosure
  • START may be used as OPEN with all LiftMaster operators.
  • May be used as OPEN and CLOSE on all operators with type B2 control wiring
G65_18300

LiftMaster Thermostat Control Heater Fin Type for 115V & 575V Gate Operators

  • Heater used in BG type gate operators
Installation Manual
K75-18618

LiftMaster Disconnect Kit for Grey SL595

  • Kit includes: Disconnect support bracket Detent plate Disconnect lever Release yoke Bevel and Disconnect shaft
  • Works with SL590 and SL595 Gate operators that are painted Grey
Q024

LiftMaster Limit Switch Assembly for SL3000 (K75-50097) *** To Extent of Inventory

  • Same as part number K75-50097
Q400-D

LiftMaster Circuit Board Assembly with Reset (Q400E)

1013-1-1/4-24'

Rigid Vinyl Bottom Retainer L-Shaped 24' Long

  • For door thickness: 1-1/4"
DTG

Linear Delta3 Safety Edge Transmitter 310 MHz

  • Activates one Delta-3 receiver for remote stop or reverse safety edge
  • No cables or coiled wires
  • Mounting screws (4) supplied
  • Power: 9-volt battery
  • Codes: 256 (set by dip switches)
  • RF frequency: 310 MHz
    • .......more details
Programming Instructions
MI00007

Micanan Front Idler Assembly for PRO-APT/T

  • For model PRO-APT / T
  • 3/4" x 5.79" LG
50-105

LiftMaster Black Coil Cord 4-Wire 18-ga 20 ft. Extended Curly Cord

34299R

Genie Deluxe Wall Console Series II ** Discontinued Replaced by 39165R

  • Deluxe Wall Console for Genie Intellicode Series II only
  • 3 function console: operates door opener controls lights and security lock out switch
  • Compatible with Code Dodger
  • Same as previous part number: GPWC-2WLB
883LM

LiftMaster Door Control Bell Button for Sec+ 2.0 (Use 883LMW)

  • Controls garage door operation and opener lights
  • Easy and fast programming
  • Compatible with Security+ 2.0 and MyQ remotes and accessories
Installation ManualManuel d'Installation
.225-258-L

Cut-to-Length Torsion Spring .225 x 2-5/8" Left Hand Wound Orange/Green

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
.225-258-R

Cut-to-Length Torsion Spring .225 x 2-5/8" Right Hand Wound Orange/Green

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
.262-2-L

Cut-to-Length Torsion Spring .262 x 2" Left Hand Wound Red/Yellow

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
.250-2-R

Cut-to-Length Torsion Spring .250 x 2" Right Hand Wound Green

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
.218-134-R

Cut-to-Length Torsion Spring .218 x 1-3/4" Right Hand Wound Yellow/Orange

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
86LMC

LiftMaster Antenna Extension Kit

  • For use with 312HMC 412HMC 422LMC and 423LMC
  • Kit contains 15ft of cable
G3T-BX

Genie 3-btn Dual Frequency Transmitter 37218R

  • This transmitter replaces all Intellicode and Overhead Door Code Dodger transmitters made after 1997.
  • For Intellicode operators pre-1997 use GITR3 for best results
  • Operates with 315 & 390 MHz Intellicode 2 technology
  • Able to control up to 3 garage doors
  • Visor clip and battery CR2032 included
  • Replaces: GIT GIC90 GMIC90 G2T OCDT ACSCTG TBSTG GIT-1 GIT-2 GIT-3 ACSCTG Type 1 ACSCTG Type 2 ACSCTG Type 3 TBSTG GIC90-1 GMIC90-3 GIC90-2 GMIC-3BL GIC90-3 OCDT-1 OCDT-2 OCDT-3 G2T-1 G2T-2 G2T-3 GICTD-1 GICT390-1 GIFT390-1 GIT390-4
    • .......more details
Programming InstructionsInstructions de programmation
.283-258-R

Cut-to-Length Torsion Spring .283 x 2-5/8" Right Hand Wound White

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-258-INSTALLED
ME123-C

Miller Edge U-Shaped PVC Mounting Channel Sold by the Foot

  • 2" Wide 1-1/4" High
20-2LMC

LiftMaster 2-Strand Bell Wire 500ft White/Red

  • 2 strand 22 gauge tin-dipped copper hook-up wire
  • Color coded White & White/Red wires
CR2032

Maxcell 3V Lithium Button Cell

ME123-BLK-U

Miller Edge Black Universal Outlet 2 -Wire 2" wide x 1-1/2" high Sold by the Foot

  • Electromechanical slide in edge for sectional doors and sliding gates.
  • Touch sensitive singaling allows for immediate stopping and reversing of motion
  • Temperature range: -30F to 155F
  • Lead wire: 22 gauge universal
  • Sensitivity: nominal 6-8 PSI
  • 2 wire NO configuration
    • .......more details
Installation ManualWorksheetSell Sheet
.468_5-1/4"-LH

Torsion Spring .468 x 5-1/4" x 12ft LH Blue/Orange **NLA

  • Wire size: .468
  • Inside diameter: 5-1/4"
  • Length: 12 ft