Devanco Canada - Get The Right Garage Door Opener‎ and Parts

766

Fasteners Flat Head Carriage Bolt 1/4-20 x 2-1/2" 1000/Box

Full length thread
Max torque = 6

EXA-2000

Linear Directional Antenna (AAE00331)

Compatible with all Linear receivers with Type F antenna connector
Receives signals in 288 to 320 MHz range
Directional remote antenna designed to enhance the radio range of Linear receivers
Includes 10 feet of coax
Clamp for mounting
Dimensions: 21” W x 5” H x 1.5” D

.......more details

CP-SH-58-1038

Lynx Complete Limit Shaft Assembly for MCJH

5/8" x 10-3/8"
Same kit used for HDC except the HDC has 1 extra 5/8" space washer

950-188

Richards-Wilcox 2" or 3" Single Bottom Cable Bracket Left Hand

Original Richards-Wilcox part

OPH-6212-ECB

Manaras Opera-H 1/2HP 240V 1Ph with Electronic Circuit Board

A heavy-duty industrial jackshaft operator.
For use on Standard High and Vertical Lift sectional doors.
Can also be used on Rolling doors or Grilles.
Comes with a self-engaging chain hoist for manual operation.
Clearence: side room required 15"
25 cycles per hour 100 cycles per day

.......more details

Installation Manual Sell Sheet

CP-PW-NM-CDJH

Lynx Pocket Wheel for CDJH Hex Bore OD 6.35"

Same as #2-30-1

LVB620-11SF

Steel-Faced Laminated Bumper Black 6" Projection Vertical Installation 20" x 11" Sold Individually

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required.
5/8" anchor bolts mounted through pre-drilled holes into dock or can be welded to curb angle.
Steel face is 3/8" thick heavy duty high carbon steel that is mounted over a laminated dock bumper.
Plate to be welded to 2 or 3 steel support brackets which are to extend back to the 3/4" supporting rods.
Brackets to be punched with elongated holes to allow steel face to "float" upon impact.

.......more details

Q024

LiftMaster Limit Switch Assembly for SL3000 (K75-50097) *** To Extent of Inventory

Same as part number K75-50097

UCFL-1

Self-Aligning Cast Flange Bearing Football Style 1" Bore UCFL205-16

Grey cast iron painted.
Comes with 2x set-screws
Football style 2 bolt

EL2000SS

LiftMaster Telephone Entry Access Control System Stainless Steel ***NLA

A high-capacity telephone entry access control system designed to complement virtually any gated community.
It is flexible enough to be used in apartment buildings condo complexes office parks and commercial sites.
features a 5-inch backlit LCD screen and clearly displays up to 4 lines with 20 characters per line making it a great choice for multi-tenant installations
Entry Codes allow for 2000 4-digit codes to be programmed. The codes can be time-restricted and/or use restricted. The codes can be split up any way you choose; 500 directory codes 1000 card codes 500 entry codes for example •Transaction Monitoring stores a maximum of 8000 transactions including date time identification and transaction type.
Activity Reporting gives property managers the ability to print database system and history reports.
Call Forwarding and Do Not Disturb schedules can be programmed for every resident.

.......more details

Installation Manual Programming Instructions Instructions de programmation Sell Sheet

029-98105

T-Style Replacement Door White Stainless Steel Package 029-98105

Replacement door size between 72"- 98" wide x 100.25-105" high
Painted white
Stainless steel package
Includes Hinges Rollers and Cable

41D794

LiftMaster Replacement Motor with Positioning Sensor

Electric motor for model 3850

Installation Manual Manuel d'Installation

PS-20A

Miller Edge Pneumatic Air Switch in ABS Enclosure

Pneumatic switch offering a reliable low cost alternative to a standard electric sensing adge.
When attached to a hose inserted into the existing weather stripping the PS-20A acts as an effective sensing edge on doors up to 18ft in length.
Applications: rolling doors sectional doors and mass transit.
Electrical configuration: 3-wire SPDT
Temperature range: -20F to 158F
Max pressure: 20 PSI

.......more details

EP2987

Exhaust Port 6" with latch long barrel ** Discontinued

6" inside diameter 2" sleeve with latch.
Includes fasteners & gaskets.

OMJ-6112-ECB-L

Manaras Medium-Duty Jackshaft Operator 1/2 HP 120V with Electronic Circuit Board Left Hand

Designed for use on standard high and vertical lift sectional doors
Can also be used on small rolling doors and grills
Single phase intermittent-duty motor has instant reverse and internal automatic reset thermal overload protection
Mechanical brake
Floor level disconnect mechanism which must be engaged for manual push-up operation
14 cycles per hour 50 cycles per day

.......more details

Installation manual Sell sheet

27-20308

Truck Door Balancer Bracket End - Curbside for Whiting Roll-Up Doors

Steel construction
Plain finish
Cross Reference: W #2523 for #2376 balancer

276554

Overhead Door Ribbed Air Tubing 1" Sold by the Foot

Rubber tubing

MK00737

Micanan Feature Circuit Board with Contactor Interface Non-Monitored 575V **use MK00642-NM

For all HP - 575V all voltages 1.5 2 3 & 5HP
Non-Monitored

Instructions Manual

PRO-TB-5053-U

Micanan 1/2HP 575V 3P Trolley Operator with Brake N1 Eyes Monitored ECB

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#410 roller chain on 1/2 HP models
Monitored board

MD-00252

Micanan Connecting Link #50

CH751L5-LH

LiftMaster Hoist Op. with Carwash Mod. 3/4 HP 115/230 VAC Logic 5 Left Hand

Industrial Duty Hoist Operator with Damp Environment modification.
Comes with either CPS-UN4 or CPS-RPEN4 photoeyes

Installation Manual Manuel d'Installation Sell sheet Brochure

.218-3-144-LH

Torsion Spring Mini Storage .218 x 3" x 12ft Left Hand

GAREX-PVC-W-20

Residential Side & Top PVC Weather-Strip with cap 20' Long (241") - White

White rigid retainer with white flexible vinyl.
Dual fin vinyl.
Comes with snap-on cap to hide screws.

CP-SH-34-16-1212

Lynx Complete Clutch Shaft Assembly for CDJH

3/4" -16 x 12.50"

9003-17FT-BLACK

Commercial Side & Top PVC Weather-Strip Reverse Angle Bolt On 17' Long - Black

Black rigid vinyl retainer with black flexible vinyl insert.
Reverse angle bolt-on vinyl retainer.
Bolts onto reverse angle steel jamb.

Drawing

28-30012

Truck Door 1" Vertical Track 93.5" for Todco Roll-Up Doors

Galvanized steel 14 gauge construction
For use with 1" diameter rollers

17K

Rolling Steel 2" Flat Continuous Cast Endlock

Endlocks are riveted to curtain slats ends of every other slat to prevent slats from shifting laterally and to prevent curtain wear in guides.
Continuous endlocks are both ends of every slat.
Rivets included with endlocks

MP-00081

Micanan Double V-Belt Mod. for PRO-J H HHD

Provides added strength to the belt drive system

MOUNTSHAFT001A

Manaras Clutch Shaft Kit for MJH

Input / clutch shaft kit for MJH built after 1999

Drawing

.319-3-3/4-RH-C

Torsion Spring .319 x 3-3/4" x 144" RH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .319 ID: 3-3/4" Length: 12 ft

21-35077

LiftMaster Transformer 575V 24V 40VA

575V PRIMARY 24V SECONDARY 40VA
Same as K21-35077

1005-1-3/4-8'

Aluminum Bottom Retainer U-Shaped

For door thickness 1-3/4"

PRO-GH-10083U-R

Micanan 1 HP 208V 3P Gearhead Op. N1 Eyes Monitored ECB Right Hand

Designed for use on all rolling doors and grilles and for large sectional doors with high or vertical lift.
Full function smart 10.0 logic board featuring on-board receiver with antenna and enhanced program selections.
External radio control terminal strip
Three button O/C/S control station Nema-1
Supplied with Nema-1 photocells
Emergency chain hoist with electrical cut-out switch for manual operation

.......more details

Installation manual Specification sheet

.234_1-3/4"-RH

Torsion Spring .234 x 1-3/4" x 12ft RH Blue/White

Wire size: .234
Inside diameter: 1-3/4"
Length: 12 ft

OPJ-6532-ECB

Manaras Heavy-Duty Jackshaft Operator 1/2 HP 600V 3 Ph with Elect Circuit Board

An industrial operator designed for use on standard high and vertical lift sectional doors
Can also be used on rolling doors and grills
It incorporates a floor level disconnect mechanism for manual operation
25 cycles per hour 100 cycles per day
Continuous-duty single phase capacitor start or 3 phase motor open drip proof
Mechanical brake

.......more details

Installation Manual Sell Sheet

27-20500

Truck Door Bearing and Bracket Plate Assembly for Roll-Up Doors

Zinc plated finish
Bearing with 1" bore pressed in a football style flanged retainer
Factory installation assures proper bearing alignment
Cross reference: T #51038 W #4033 320000

OPJ-6114-ECB

Manaras Heavy-Duty Jackshaft Operator 1 HP 120V 1 Ph with Elect Circuit Board

An industrial operator designed for use on standard high and vertical lift sectional doors
Can also be used on rolling doors and grills
It incorporates a floor level disconnect mechanism for manual operation
25 cycles per hour 100 cycles per day
Continuous-duty single phase capacitor start or 3 phase motor open drip proof
Mechanical brake

.......more details

Installation Manual Sell Sheet

R5114

Shaft Bearing 1-1/4" Machined 900LBS

Standard press-in bearing no retainer
Rated for 900 lbs

RB741

Linear / GTO 1-Button Transmitter 318 Mhz

Standard transmitter included with all GTO gate operators
Much smaller in size than previous model and improved signal range
The single button controls the gate operator and has adjustable code settings and has (new miniature) visor clip for your vehicle and now a whole for key-ring or key chain.
It is compatible with GTO and Mighty Mule gate operators
The code settings are the 9 dipswitches located inside the cover.
Measures: 2-1/2 H x 1-1/2 W x 9/16 D.

.......more details

82-SB50-08

LiftMaster Shoulder Bolt 3/8"-16x8 **DISCONTINUED

Shoulder Bolt
For SW470-S3
Formerly 82SB5008 G82SB5008

NO_RAILS

LiftMaster Residential Operator Head Only $20.00 reduction

SEL2641R433-Z4-F

Erone 4-Relay Stand Alone Mini Receiver Fast 433MHz

841LM-NOBOX

LiftMaster Automatic Garage Door Lock No Box

Automatic operation performs in tandem with the opener so it always locks and unlocks.
Anywhere assurance smartphone monitoring with the MyQ® App means homeowners always know that the garage is secure
Absolute protection the automatic deadbolt lock makes the garage door virtually impenetrable
Comes included with 8500W
Works on models 8550WLB 8360W 8587W & WLED
same as Part # 001D8875

.......more details

MASDCBB3

LiftMaster MEGA SPRINT High-Speed DC Barrier Gate Op ARM SOLD SEPARATELY Incl 29-NP712

24VDC (1/2 HP equivalent) motor
The heavy-duty motor supports 10000 cycles per day with an operator speed of .9 seconds to open or close.
Radio receiver built-in
Aluminum alloy chassis
Built-in battery backup
Soft start/stop

.......more details

SP8-ARM

LiftMaster 8 ft. Arm with Yellow Padding. Requires MA031 ordered separately

Padded arm for MASDCBB3

GALV-319-6-R

Cut-to-Length Torsion Spring .319 x 6" Right Hand Galvanized Blue/Green

Spring wire only. Cones and Filler extra

GALV-319-6-L

Cut-to-Length Torsion Spring .319 x 6" Left Hand Galvanized Blue/Green

Spring wire only. Cones and Filler extra

GALV-319-6-144-R

Torsion Spring .319 x 6" x 12ft RH Galvanized Blue/Green

Wire size: .319
Inside diameter: 6"
Length: 12 ft

GALV-319-6-144-L

Torsion Spring .319 x 6" x 12ft LH Galvanized Blue/Green

Wire size: .319
Inside diameter: 6"
Length: 12 ft

R5993

Shaft Collar 1" Stainless Steel with 1 Set Screw

Set Screw: 5/16 x 18
1" ID

SBR-N1-0L-H120

Micanan Brake Assembly for PRO-HBH LH 120V Solenoid included

Solenoid Included

BCSI-PM04

Pivin Drapeau Gear Reducer in Synthetic Oil *** Price by Quote Only

2806.200.280

Whiting .200 x 2-3/16 x 28" Roadside with Cones

.192-2-3/16-72-RH

Spring Wire .192 x 2-3/16" x 72" RHW Galvanized

.192 x 2.188" x 6'

.192-2-3/16-72-LH

Spring Wire .192 x 2-3/16" x 72" LHW Galvanized

.192 x 2.188" x 6'

38001404

Tork Winch CW 1800 Curtain Winch Formally TW1200 *** Price by Quote Only

Special Order item

.171-2-3/16-72-LH

Spring Wire .171 x 2-3/16 x 72" LHW Galvanized

.171-2-3/16-72-RH

Spring Wire .171 x 2-3/16 x 72" RHW Galvanized

7176.218*28.85

Whiting Heavy Duty Torsion Assembly .218 x 2" shaft 85"

2376.206.35.940

Whiting Torsion assembly .206 wire size 35" spring length 94" shaft

112631.0001.S

Overhead/Genie Logic Board

50181

Doorlec Brake Assembly 230/208V W/Double Pulley

Complete brake assembly

19045

Doorlec VBelt 4L360

41011

Doorlec Brake Release Cable

Used on GH

210264

Skylink Case Cover Atoms

BGARM

LiftMaster 10' Arm only for Techna Barrier Gate

For use on Techna gate operator

AIRSWITCH018

Exterior Air Switch SPDT ABS Housing

SPR40B48X1

Sprocket 40B48 1" Bore 1/4" KW 2SS

48 tooth sprocket for #40 chain

CGH101L5-RH

LiftMaster Gearhead w/ Brake & Carwash Mod. 1 HP 115/230V 1P L5 - Right Hand

Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting except when a MOD is added
MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.

.......more details

MSJ-6534-M-N1-RH

Manaras MSJ 1 HP 600V 3Ph Monitored Board w/N1 Eyes RH

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
35 cycles per day > 150 cycles per day

.......more details

5001-7-CREAM

Residential Side & Top Weather-Strip 7' Long - Cream

Painted aluminum retainer with flexible dual fin vinyl.
Residential use.

LB610-102

Laminated Bumper Standard Black 102" x 10" 6" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

DC300-50-1

Dyna-Hoist 300 Series Direct Drive BBU 1/2 HP 110/240V 1" Shaft 40:1 Ratio ** Quote Only

Special-Order. Price by Quote Only
Automated battery backup - the unit continues to work on batteries with full functionality (but does move more slowly) until the unit gets to about 75% of battery capacity then transitions to push and hold operation.
The 300 series also works with and powers 12V automatic lock systems
Option available: 5-conductor cable (5') to reduce the risks of miswiring incidents available in 5' 10' 15' 20' or 25' lengths
Integrated software fuse that shuts down the unit to help prevent board component disasters should these be incorrectly installed on grossly imbalanced or improperly sized doors.
30:1 40:1 50:1 gearbox ratio are available. Please specify when ordering otherwise 40:1 will be supplied

.......more details

201-300-401-01-REFRUB

Refurbished 201-300-401-01 Unit

E/1929/236

Automatic Systems Rod Assbly w/2 Rod Ends (BL229)

Used on the BL229 gate op.

210316

Skylink AT3 1HP Atoms Head for Tube Rail

LQ803

TS-1-207-GALV-KEY

Tube Shaft 1" x 207 (17'.25) Galv w/KW 1/4" x 3/8"

When ordering order one foot longer that actual door width
Comes with 3 keys 1/4-3/8-3'' long

TS-1-168-GALV-KEY

Tube Shaft 1" x 168 (14'.0) Galv w/KW 1/4" x 3/8"

When ordering order one foot longer that actual door width
Comes with 3 keys 1/4-3/8-3'' long

TS-1-159-GALV-KEY

Tube Shaft 1" x 159 (13'.25) Galv w/KW 1/4" x 3/8"

When ordering order one foot longer that actual door width
Comes with 3 keys 1/4-3/8-3'' long

TS-1-129-GALV-KEY

Tube Shaft 1" x 129 (10'.75) Galv w/KW 1/4" x 3/8"

When ordering order one foot longer that actual door width
Comes with 3 keys 1/4-3/8-3'' long

461-0002-08

Richard-Wilcox #31 Square Track 8ft Length Sold per Piece

Used with #7-6095 rollers
Replacement for #75x14g

CPT210-END-KIT-U

Miller Edge Universal End Kit for CPT210

Kit contains: 2) Caps (2) cages (1) wired plug (1) 10K plug (1) 8.2K plug (1) diode capacitor plug (1) non-mon. plug end plug (2) screws

5-36-2

2" Vertical Track 14-GA 7'-3" (8' door) Sold per Pair

15-50B72LGH

Sprocket 72 Teeth 1" Bore 1/4" Keyway w/SS

Same as 71-1550b72LGH

15-50B50LGH

Sprocket 50 Teeth 1" Bore 1/4" Keyway w/SS

Same as 71-1550B50LGH

36310

Doorlec Flicker Relay OFF/ON 120V AC

31114

Doorlec Sprocket 410B09 5/8" Bore 3/16" Keyway

9 tooth sprocket

BMA3

NICE Release with Lever for Newer Big Metro Ops

D1101KH-C-S-SSV2A

Doorbird Classic IP Video Door Station Stainless Steel Surface-Mount

Video intercom including surface mounting housing
Keypad Module: Configurable via App Up to 500 individual PIN codes Individual events (e.g. trigger a relay HTTP(s) request)
LAN connection (PoE compatible)
2-Way audio
Ultra-wide angle lens HD video 1080P night vision IR LEDs
4D motion sensor

.......more details

Sellsheet

KW011

Keystock 3/16 x 1"