Devanco Canada - Get The Right Garage Door Opener‎ and Parts

CUSTOM4X8PO

Ideal for use on with gravel driveways or sufaces that are to be asphalted
Features a twisted lead-in to reduce the chances of interference and false detections.
Direct burial loops should be buried approximately 6" deep

Installation Instructions Instructions d'installation Spec Sheet Brochure Loop Placement Guide Guide de positionnement des boucles

6X10SC50

Devanco Loop 6' x 10' saw-cut 50' lead-in

Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
Ideal for use on existing asphalt or concrete surfaces
Features a non spliced continuous wire throughout loop turns and lead-in.
requires the use of loop sealer when being installed to ensure long lasting trouble-free detection

Installation Instructions Instructions d'installation Loop Placement Guide Guide de positionnement des boucles

6X24PO50

Devanco Loop 6' x 24' pave-over 50' lead-in

Ideal for use on with gravel driveways or surfaces that are to be asphalted
Features a twisted lead-in to reduce the chances of interference and false detections.
Direct burial loops should be buried approximately 6" deep

Installation Instructions Instructions d'installation Spec Sheet Brochure Loop Placement Guide Guide de positionnement des boucles

XP4040CUSH689

Heavy Duty Door Closer

Heavy Duty Door Closer with Spring Cush-N-Stop Arm

MV-00025-OLD

Micanan 32-Door O/C/S Transmitter CT-32 313 MHz OLD STYLE Deep Buttons *** NLA repl by new style

Commercial / Industrial transmitter

GH4416-08-L

Green Hinge #8 12-ga Left Hand *** No longer available

A unique spring-loaded hinge that allows automatic adjustment of the door.
Provides a close tight seal of the door to the building
Green powder coat finish
For doors up to 20ft

MGS20-Y-2L-05

Miller Edge Sensing Edge Square Yellow 2-Wire Left Hand Outlet 5ft Long

��Electromechanical edge for standard 2" round or square frame sliding sing and bi-part gates. •3-sided activation allows for immediate stopping or reversing of motion •Contours to round or square posts. •Temperature range: -30F to 155F •Lead wire: 18 gauge 2ft length •Sensitivity: nominal 6-8 PSI •2 wrie NO configuration •ANSI/UL325 recognized component •Cannot be bent •One year warranty

19-5118-NP

LiftMaster Trolley Roller Chain Pack #41 for 18ft Door Nickel Plated

For 3/4 & 1 HP trolley operators

LB612-36SF

Steel Faced Laminated Bumper Black 12" x 36" 6" Projection Horizontal Installation

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required
“Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

PRO-PL-15053-R

Micanan Wall Mounted Control Panel Mod (R) Contactor

Standard features include N-4/12 - 20" x 16" x 8" panel B-2 C-2 wiring 24V controls hinged cover backplate and primary fuses in panel

CB18A0500

Cable 1/8" 7x7 500' Galvanized

Galvanized cable 1/8" 7x7 500ft spool.

Comparison charts

.283-514-L

Cut-to-Length Torsion Spring .283 x 5-1/4" Left Hand Wound White

Priced per inch
For factory installed cones priced seperately - use part no. C-514-INSTALLED

PRO-APTB-5081-U

Micanan 1/2HP 208V 1P Apartment Trolley Operator With Brake N1 Eyes Monitored ECB

Low clearance design for APT applications (9.5")
Door speed: 12" per second
Monitored board
On-Board receiver holds up to 20 transmitters

.393-514-R-C

Cut-to-Length Torsion Spring .393 x 5-1/4" Right Hand Wound Coated ** Price by Quote Only

Priced per inch - cones & filler sold seperately
For factory installed cones use part no. C-514-INSTALLED

TB412-14SF

Steel Faced Laminated Bumper Black 12" x 14" 5 1/4" Projection Horizontal Installation

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required
“Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

5-30-8A

3" Vertical Track 12-GA 14'-4" (15' door) Sold per Pair

Pierced track

OGH-6232-ECB

Manaras 1/2 HP 208V 3Ph Gear Head Operator with Elect. Circuit Board

A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
Includes a self-engaging chain hoist for manual operation
25 cycles per hour 80 cycles a day
Hoist on right side standard can easily be moved to the left in field
Full overload protection
BRACKET112 must be used for wall mounting

.......more details

Installation Manual Sell Sheet

WINDOW-SP.ORDR

Special Order Window

Made to customers specific requirements

10-3209_GATE_BRKT

LiftMaster Gate Bracket

Fits SL580GL SL595GL and new IHSL24UL INSL24UL models

BRACKET003

Manaras Disconnect Lever Bracket MJ

51-012862

Blue Giant Sensor Wand Assembly **Special Order

Price by Quote Only

GALV-331-6-R

Cut-to-Length Torsion Spring .331 x 6" Right Hand Wound Galvanized Red/White

Priced per inch - cones and filler sold seperately
For factory installed cones use part no. C-600-INSTALLED
For spring filler use part no. SPRING-FILLER
Galvanized

K79-13493A-400

LiftMaster FDOA Control Board 400 Chip

400 Chip Fire Door Operator Replacement Kit

24040

Doorlec Roller Chain #40 Sold per Ft

2376.200.35.930

Whiting Torsion assembly .200 wire size 35" spring length 93" shaft

112357.0004

Overhead Logic Board for RSX 575V 3PH

Fits OPRSXH75015BR

CP-LEV-BRAKE

Lynx Brake Lever

41522R.S

Genie Optical Encoder (RPM Sensor) Belt/Chain Drive

Compatible with these Genie models that have RIDE motors (see below): 1028 1028H 2028 2028H

TS-1-183-GALV-KEY

Tube Shaft 1" x 183 (15'.25) Galv w/KW 1/4" x 3/8"

When ordering order one foot longer that actual door width
Comes with 3 keys 1/4-3/8-3'' long

BPPN1758

Garex Bottom PVC Moulding Black for 1 3/4" Door U shaped 96" (8')

GALV-343-6-R

Cut-to-Length Torsion Spring .343 x 6" Right Hand Wound Galvanized Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-600-INSTALLED

SHSS-38-1

Set Screw Square Head 3/8" x 1"

Natural black
16 threads per inch

H11G04-SS

Hinge #4 x 11 gauge Stainless Steel

Manufactured with 11ga. Rust-Resistant 304 Stainless Steel
Universal Design
Fits Most Overhead Sectional Doors
Priced Per Each

MCB-DR-SH-ASSY

Lynx Clutch/Drive Shaft Assembly MCB 3/4" x 11-3/4"

For trolley operator

GALV-319-334-L

Cut-to-Length Torsion Spring .319 x 3-3/4" Left Hand Wound Galvanized Blue/Green

Priced per inch - cones sold seperately
For factory installed cones use part no. C-334-INSTALLED
Galvanized

GALV-312-258-L

Cut-to-Length Torsion Spring .312 x 2-5/8" Left Hand Wound Galvanized Yellow

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED
Galvanized

GALV-283-258-L

Cut-to-Length Torsion Spring .283 x 2-5/8" Left Hand Wound Galvanized White Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

GALV-243-334-L

Cut-to-Length Torsion Spring .243 x 3-3/4" Left Hand Wound Galvanized Price per Inch

Priced per inch
For factory installed cones priced seperately - use part no. C-334-INSTALLED

GALV-283-2-L

Cut-to-Length Torsion Spring .283 x 2" Left Hand Wound Galvanized White Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

GALEOW

Erone 26-bit Wiegand Backlit Keypad

Compatible with ATRIUM CENTAUR and any 26-bit Wiegand system
Heavy-duty Zamak® cast alloy
Indoor/outdoor application
Blue backlit keypad
Weather resistant and vandal proof
PIN code: 4 to 8 digits

.......more details

Wireless System Chart

2376.156.17.730

Whiting Torsion assembly .156 wire size 17" spring length 73" shaft

GALV-406-6-144-L

Torsion Spring .406 x 6" x 12ft LH Galvanized Blue/Yellow

Wire size: .406
Inside diameter: 6"
Length: 12 ft
Galvanized Stenciled

GALV-225-2-L

Cut-to-Length Torsion Spring .225 x 2" Left Hand Wound Galvanized Ornage/Green Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

44-60-160

Extension Spring 10' Door - 160 lbs

Clipped ends
44" long 60" stretch 160 lb load

CAPXSTKPL

LiftMaster Trim Kit with Postal Lock for CAPXS

Trim plate with integrated postal lock cover exclusively for installing with Model CAPXS – Smart Video Intercom S
Pre-Wiring included for postal lock device (not included).
Provides a clean aesthetic installation when the application calls for a postal lock while also helping hide remnants of a previous installation
Dimensions: 14” x 6.5” x 1.4”

N4GH205L5-RH

LiftMaster Gearhead wi/Watertight/Oiltight Mod. and Brake 2 HP 575V 3-Phase Logic 5

N4 (M103) modification installed on operator Watertight Oiltight Dust-tight with Nickel-plated chain and Dynamic brake.
Comes with CPS-UN4 photo eyes

GALV-262-334-144-L

Torsion Spring .262 x 3-3/4" x 12ft LH Galvanized Red/Yellow

Wire size: .262
Inside diameter: 3-3/4"
Length: 12 ft
Galvanized Stenciled

HRD-288-1

EMX Universal Mounting Bracket L-Shape Black Sold per Piece

Fits RET2 MON2 4X2 WEL-RX REFLECTOR-O-EX models

2376.162.18.960

Whiting Torsion assembly .162 wire size 18" spring length 96" shaft

9003-200-17-BLACK

Commercial Side & Top PVC Weather-Strip Reverse Angle 2" Track Bolt On 17' Long - Black

Black rigid vinyl retainer with black flexible vinyl insert.
Reverse angle bolt-on vinyl retainer.
Bolts onto reverse angle steel jamb.

Drawing

9003-200-11-BLACK

Commercial Side & Top PVC Weather-Strip Reverse Angle 2" Track Bolt On 11' Long - Black

Black rigid vinyl retainer with black flexible vinyl insert.
Reverse angle bolt-on vinyl retainer.
Bolts onto reverse angle steel jamb.

Drawing

9003-200-9-BLACK

Commercial Side & Top PVC Weather-Strip Reverse Angle 2" Track Bolt On 9' Long - Black

Black rigid vinyl retainer with black flexible vinyl insert.
Reverse angle bolt-on vinyl retainer.
Bolts onto reverse angle steel jamb.

Drawing

K19-40720D-NP

LiftMaster Chain #40 Nickel Plated 30ft

Includes (3) Master Links.

GALV-363-6-R

Cut-to-Length Torsion Spring .363 x 6" Right Hand Wound Galvanized Green/White Price per Inch

Priced per inch - cones & filler sold seperately
For factory installed cones use part no. C-600-INSTALLED

GALV-262-2-R

Cut-to-Length Torsion Spring .262 x 2" Right Hand Wound Galvanized Red/Yellow Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

1326-134-BLK-PLEXI

Elton Commercial Window 1-3/4" thick 1326 Black Frame Sealed Plexi Glass

Screw together window kit
Frame size: 26-1/8" x 13-9/16" (Tip to Tip)
Cut-out size: 25-1/16" x 12-9/16"
Vision area: 23-7/16" x 10-13/16" Corner Cut 4" Radius
Different glass options and frame colours are available upon request

AX25-ZAP

Zap Cogged VBelt AX25

AW14K500-18-RF

Miller Edge Air Wave Edge System Trans/Recvr 18ft Non-Monitored

AW14-RF MRF-01 RAH-500 (18') P50 P-50H 218-27-18
AW14-RF-K10 end plug connector plug 1/2”-18 ft. hose

GAREX-PAINT-SBL

Garex Touch-Up Paint Sable

2376.156.145.550

Whiting Torsion assembly .156 wire size 14-1/2" spring length 55" shaft

WHITING-RT

Whiting Reversed Track Assembly Option Dry Freight Door

This is an option when ordering a door

2807.171.250

Whiting Spring Assby .171 x 2-3/16 x 25" L Curbside

Replacement torsion spring with cones
Specs: .171 x 2-3/16" x 25" Long
For Roadside order part # 2806.171.250

2376.187*31.950

Whiting Torsion assembly .187 wire size 31" spring length 95" shaft

This is a full balancer assembly
Twin springs one road one curb with a shaft through it

K74-39295-2

LiftMaster E-Box UL325 SL585

K74-39295-2MC is a Electrical Box Replacement Kit with UL325 Safety Standards and Compliance Regulations
For models SL585503UL SL585103UL

236-110

Serco 3/4" Klip Ring ** Price by Quote Only

For Serco loading docks

50304

Doorlec Hoist Shaft Kit w/Disconnect Coupler

For models LJH LJHW

4580-304-SLATE/GY

Adseal DWS Weatherseal Silicone Adhesive Sealant 304ML Slate Grey 458-22 *** To Extent of Inventory

304ml cartridge
Ideal for movement and perimeters joints
Meets ASTM C920 S NS Class 50 NT M GA O
Meets AAMA 802 and 805 standards
Can be used on aluminum glass masonry some plastics painted and unpainted metals & does not yellow
Excellent resistance to UVs for indoor and outdoor use

.......more details

2705.156_180

Whiting Curbside Torsion Spring for Cube Truck Roll-Up Doors 18" Long

Most common torsion spring for cube trucks
Specs: .156 x 2-3/16" x 18" Long
For Roadside order part # 2704.156*180

2704.156_180

Whiting Roadside Torsion Spring for Cube Truck Roll-Up Doors 18" Long

Most common torsion spring for cube trucks
Specs: .156 x 2-3/16" x 18" Long
For Curbside order part # 2705.156*180

CA-107-412

Continuous Angle 1-1/2" x 4-1/2" x 107" L Sold per Piece

K1D6686CC

LiftMaster Expansion Board CSL24V

This is a replacement CSL24V Expansion Board
For use with various LiftMaster® Slide and Swing Gate Operators

GAREX-PAINT-WHTE

Garex Touch-Up Paint White

PRO-GHC-15011U-L

Micanan 1.5 HP 115V 1P Gearhead Operator with N1 Eyes Monitored ECB Left Hand

External radio control terminal strip
Heavy duty worm gear reduction in oil bath gearbox
Solenoid brake standard
#50 roller chain and sprockets on final drive
Emergency chain hoist with electrical cut-out switch for manual operation
Full function Smart 10.0 logic board and on-board receiver

.......more details

510.8000.00

Whiting Option for Short Panel Stack Up DF Door

This is an upcharge when ordering dry freight doors
Shorter panels move thru the radius of the track smoother

K20-3050M-5

LiftMaster Electric Motor 1/2 HP 575V 3Ph BM/CF

Also known as: K20-3050M5 20-3050M-5
For use with various LiftMaster® 3-Phase 575V Gate Operators and Perimeter Access Solutions

C-1520-134-W

Thermal Window 19-1/2" x 14-5/16" Cut-Out for 1-3/4" Cedo Door White

For 1-3/4" thick door
Model: 1520
Frame Size: 20 9/16” x 15 7/16” Cut-Out Size: 19 1/2” x 14 5/16”
Cedo replacement frame

C-24-12-2-BLK

Thermal Window 24" x 12" for 2" Door Black

For 2" thick door
Square corners

MG020-Y-2E-P/FT

Miller Edge Sensing Edge Yellow 2-Wire End Outlet Sold per Foot

Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
Touch sensitive signaling
Temperature range: -30F to 155F
Lead wire: 18 gauge 2ft length
Sensitivity: nominal 4 PSI
2 wire NO configuration

.......more details

GH-321-3/4

Doorlec Industrial Gearhead Door Operator 3/4 HP 230V 1-Phase

Extra Deavy-Duty Gearhead Industrial Operator or large Sectional or Rolling Steel Doors
DC-2000 Logic Board with adjustable Timer To Close Delay On Reverse and Traffic Light Control
Worm gear reducer 40:1 ratio for high-torque and long life
Solenoid Disk Brake Prevents coasting and secures the door when closed
TEFC (sealed) continuous-duty electric motor with overload protection
Optional Friction Clutch available

.......more details