Devanco Canada - Get The Right Garage Door Opener‎ and Parts

LVB624-11

Laminated Bumper Black 6" Projection Vertical Installation 24" x 11" Sold Individually

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.
This model has angles on both sides
Width: 11" bumper 13" incl. angles
Length: 24" long

LB612-18

Laminated Bumper Standard Black 12" x 18" 6" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LB610-24

Laminated Bumper Standard Black 10" x 24" 6" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LB610-14

Laminated Bumper Standard Black 10" x 14" 6" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LB412-14

Laminated Bumper Standard Black 12" x 14" 4" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 1” diameter.

.......more details

.207-3-9-RHW

Mini Storage Spring .207 x 3" x 9" long Right Hand

MK-00120

Micanan Heater Probe in Reducer Mod. (120V 20W 3/8" NPT)

PRO-GHC-30053

Micanan 3 HP 575V 3P Gearhead Operator No Controls

Specification sheet

1324-1-3/4"-BLK

Commercial Window 1-3/4" thick 1324 Black Frame Sealed Glass

Screw together window kit
Plexiglas window
Frame size tip-to-tip: 26-3/4" x 14-1/2"
Cut-out size: 25-5/8" x 13-3/8"
Vision area: 23-7/8" x 11-9/16"
Different glass options and frame colours are available upon request

.......more details

T007

Manaras Trolley Track 7ft for 1/2HP models *Actual length 114"*

For models MLT/OTH/OTBH 1/2hp only with Chain #48 (#410)

HINGE-811-PCG

Powdercoated Hinge #8 x 11 gauge Grey ** To Extent of Inventory

Heavy Duty 11 gauge offset hinge #8 - 0.87 lbs
Powdercoated Grey
For use with 7/16" stem rollers

HINGE-211-PCG

Powdercoated Hinge #2 x 11 gauge Grey ** To Extent of Inventory

Heavy Duty 11 gauge offset hinge #2 - 0.71 lbs
Powdercoated Grey
For use with 7/16" stem rollers

38877R.S

Genie Non-Configured Circuit Board

Replaces the following models: 38001R1.S 38001R2.S 38001R3.S 38001R4.S 38513R.S 38514R.S 37470R1.S 37470R2.S 37470R3.S 37470R4.S 38334R1.S 38334R2.S 38334R3.S 38334R4.S
Compatible with Series II Controls and comes with only the circuit board
In order for this kit to function properly it is important that customers know the model of their opener.
If unsure as to what resistor needs to be remove refer to the instructions that came with the unit

K74-18346

LiftMaster Limit Shaft Kit

Compatible with LiftMaster® Model GH 5HP Commercial Door Operators

MG00041

Micanan Spring Clip 7/8" ID Sold Individually

2 required per machine

MB-03001

Micanan Electric Motor Only 1 HP 110/220V 1PH Base Mount O.D.P FR56

Base mount motor fits: T TB APT J EJ H EHJ HHD SD

2376.171_25.930

Whiting Torsion assembly .171 wire size 25" spring length 93" shaft

2807.139*170

Whiting .139 x 2-3/16 x 17" L Curbside with Cones

For Roadside order part # 2806.139.170

44-60-220

Extension Spring 10' Door - 220 lbs *** By Quote Only

Clipped ends
44" long 60" stretch 220 lb load

ALUM-569

Aluminum 24" x 100' Spool Saddle Brown / Brun Fauve # 569

20% thicker than the aluminum sold in retail stores (0.022" )
Gentek # 569
Reverse side is #431 Bright White

Colour chart

41C5548

LiftMaster Wiring Harness Kit Low Voltage

For use with various LiftMaster® and Chamberlain® Garage Door Openers

.207-3-8.25-LHW

Mini Storage Spring .207 x 3" x 8.25" long Left Hand

PRO-APTB-7511-U

Micanan 3/4HP 115V 1P Apartment Trolley Operator N1 Eyes Monitored ECB with Brake

Designed for use on Commercial / Industrial high cycle sectional overhead doors with standard lift tracks.
Low clearance design for apartment applications (9.5")
External radio control terminal strip
3-btn O/C/S control station Nema-1
Solenoid brake installed
Door speed 12" per second

.......more details

.393-514-L

Cut-to-Length Torsion Spring .393 x 5-1/4" Left Hand Wound Orange

Priced per inch - cones & filler sold seperately
For factory installed cones use part no. C-514-INSTALLED

4X12SC50

Devanco Loop 4' x 12' saw-cut 50' lead-in

Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
Ideal for use on existing asphalt or concrete surfaces
Features a non spliced continuous wire throughout loop turns and lead-in.
requires the use of loop sealer when being installed to ensure long lasting trouble-free detection

Installation manual Manuel d'installation Loop placement guide Guide de positionnement des boucles

5001-8-WHITE

Residential Side & Top Weather-Strip 8' Long - White

Painted aluminum retainer with flexible dual fin vinyl.
Residential use.

K74-MODELH

LiftMaster Main Wire Harness L3

26CW94323-CUT

Truck Door Bottom Panel with Seal (13" x Cut-To-Size Painted White for Whiting Dryfreight

These panels are cut to customer's specifications
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
These panels have no routs and shipped without holes.
3/4" thick 7 ply exterior grade medium density plywood.
Painted white
Comes only with bottom retainer and seal (installed)

.......more details

5-30-8A

3" Vertical Track 12-GA 14'-4" (15' door) Sold per Pair

Pierced track

PRO-HBH10021U-R

Micanan 1 HP 230V 1P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Right Hand (Pro-HHD)

1 HP230V 1 PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
N-1 Through-beam (MK-00649) photocells included. Other options available.
3-btn o/s/c (02-103) wall control station included
Adjustable Friction Clutch 5L320 drive belt
#50 Roller chain 18 tooth door sprocket included

.......more details

MX00128-A

Micanan Clutch Pad 1-1/4" bore x 5" for PRO-GOHD *** NLA

MT21-GRAY-RH

Miller Edge 2-Wire Pressure Sensitive Edge Gray Right Hand Outlet Sold per Foot

��Electromechanical medium profile edge for rolling fire door applications. •Touch sensitive signaling allows for immediate reversing or stopping of motion. •The MT21 is completely felixible and will contour to curved surfaces. The MT21 will also act as weatherstrip. •Temperature range: -30F to 155F •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •2 wire NO configuration •Horizontal mount •ANSI/UL325 recognized component •One year warranty

Worksheet Installation manual

MG020-Y-2E-03

Miller Edge Sensing Edge Yellow 2-Wire End Outlet 3 ft Long

Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
Touch sensitive signaling
Temperature range: -30F to 155F
Lead wire: 18 gauge 2ft length
Sensitivity: nominal 4 PSI
2 wire NO configuration

.......more details

7001-16-BRONZE

Commercial Side & Top Weather-Strip 16' Long - Bronze (BZ)

Bronze galvanized steel with bronze dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.
Full case quantity only (10)

7001-14-BRONZE

Commercial Side & Top Weather-Strip 14' Long - Bronze (BZ)

Bronze galvanized steel with bronze dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.
Full case quantity only (10)

SPECIAL-ORDER

Special Order Item

PRO-HBH-5011U-L

Micanan 1/2HP 115V 1P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Left Hand

1/2 HP115V 1 PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
N-1 Through-beam (MK-00649) photocells included. Other options available.
3-btn O/S/C (02-103) wall control station included
Adjustable Friction Clutch 5L320 drive belt
#50 Roller chain 18 tooth door sprocket included

.......more details

26CW94322-CUT

Truck Door Bottom Panel with Seal (12" x Cut-To-Size) Painted White for Whiting Dryfreight

These panels are cut to an extra wide width to fit wider vehicle applications.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
These panels have no routs and shipped without holes.
3/4" thick 7 ply exterior grade medium density plywood.
Painted white
Comes only with bottom retainer and seal (installed)

.......more details

33101

Overload 0.90 to 1.50A

Setting range 1.1 - 1.6A

MU22-2WIRE-U-BLK

Miller Edge MU22 2-Wire Universal Black - Sold per Foot

��Electromechanical edge for sectional doors and aircraft hangars. •The MU22 is a custom edge manufactured to exact specifications. •The MU22 is completely flexible and will contour to curved surfaces. It's profile can also be square rectangular or angled. •Touch sensitive signaling allows immediate reversal or stopping of motion. •Temperature range: -30F to 155F •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •Vertical or horizontal mount •ANSI/UL325 recognized component •One year warranty

Worksheet Installation manual Sell sheet

IRB-BX

EMX Industries Plastic Enclosure Only for IRB-4X Nema 4 Sold Individually

Includes housing and clear plastic front

K75-19977

LiftMaster Disconnect Kit Model J SL575

MX00034-208V

Micanan Brake Assembly for PRO-HHD with 208V Solenoid (MX00206-208)

Complete brake assembly including 208V solenoid - solenoid cover sold separately part #MM00011

PRO-HB-5053U-LH

Micanan 1/2HP 575V 3P Hoist Op. with Brake N1 Eyes Monitored ECB Left Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake included

5001-14-DK-BROWN

Residential Side & Top Weather-Strip 14' Long Commercial Brown

PVC wrapped
Painted aluminum retainer
Dual fin vinyl

26CW94625-CUT

Truck Door Top Panel w/o Hardware (15" x Cut-To-Size Painted White for Whiting Dryfreight

These panels are cut to customer's specifications
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
These panels have no routs and shipped without holes.
3/4" thick 7 ply exterior grade medium density plywood.
Painted white

RW-WINDOW

Richards Wilcox Thermal Window Special Order

MX00119

Micanan Trolley Hardware Bag Complete (MQ00012)

MB-05507

Micanan Electric Motor Only 1 HP 230/460V 3PH Base Mount TEFC FR56

MB-03102

Micanan Electric Motor Only 1 HP 230/460V 3PH Base Mount O.D.P FR56 (MB33201)

Base mount motor fits: T TB APT J EJ H EHJ HHD SD
Same as MB-03102 MB33201 MB-33201

MU22-CUSTOM

Miller Edge MU22 Custom Made Edge

Edge made to customer's exact specifications

Worksheet Installation manual Sell sheet

CA-104-412

Continuous Angle 1-1/2" x 4-1/2" x 104" L Sold per Piece

MK00711

Micanan Varistor Harness 380V with Yellow Wires

SHAFT116

Manaras Input Shaft for OSH

PRO-GH-10083U-R

Micanan 1 HP 208V 3P Gearhead Op. N1 Eyes Monitored ECB Right Hand

Designed for use on all rolling doors and grilles and for large sectional doors with high or vertical lift.
Full function smart 10.0 logic board featuring on-board receiver with antenna and enhanced program selections.
External radio control terminal strip
Three button O/C/S control station Nema-1
Supplied with Nema-1 photocells
Emergency chain hoist with electrical cut-out switch for manual operation

.......more details

Installation manual Specification sheet

MP00088

Micanan Track and #41 Chain for 8' h Door *Actual length 126"*

For 3/4 & 1 HP Micanan trolley operators

PRO-TB-10083-U

Micanan 1 HP 208V 3P Trolley Operator with Brake N1 Eyes Monitored ECB

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#41 roller chain on 3/4 & 1 HP models
Monitored board
On-Board receiver holds up to 20 transmitters

MWT12

Miller Edge Transmitter RF in Nema 4 Enclosure *** To Extent of Inventory

The MWT12 safety edge transmitter is designed to provide wireless signal transmission form the safety edge to the motor controls.
It is easily mounted and wired to the gate or door edge sensor. When the sensing edge comes into contact with an obstruction a closed circuit signal is created and is sent to the transmitter.
The transmitter relays the information to the receiver and the receiver passes the signal along to the operator motor.
The gate or door stops movement and will then reverse the direction of travel.
Comes standard with a NEMA 4 weather-proof enclosure. The enclosure can be easily mounted with the four mounting holes and screws provided
Response time: nominal 30msec.

.......more details

GM-809

Gear Master

Holds shaft assembly for easy removal of roll pins
Makes changing gears easy

MV-00014

Micanan Key Switch O/C Tamper Proof Nema 4 Surface Mount

TXMQ-2:1

Grove Gear Gearbox 2:1 Ratio 56C

To replace serial # 70518900

MA024RDOT

LiftMaster White Aluminum Arm with Retro-Reflective DOT Tape 12 ft

For use on Mega-Arm gate operator
Red White reflective DOT stripe

Additional arm accessories

MP00056

Micanan Track and #410 (#48) Chain for 12' h Door *Actual length 174"*

9281431440

Spring Wire .289 x 2.625 x 144" Coated RAW RH

.289 x 2-5/8" x 12'

2807.192.340

Whiting .192 x 2-3/16 x 34" Curbside with Cones

.273-334-L

Cut-to-Length Torsion Spring .273 x 3-3/4" Left Hand Wound Orange/Red

Priced per inch
For factory installed cones priced seperately - use part no. C-375-INSTALLED

K10-37955

LiftMaster Chain Guard with Mounting Hardware HCT

PRO-H-7511E-LH

Micanan 3/4HP 115V 1P Hoist Operator NM ECB No Eyes Left Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Solenoid brake OPTIONAL
Non-monitored board NO photoeyes

Installation manual Specification sheet

1EBX

Explosion Proof 1-Btn Control Nema 7 & 9 Surface Mount

NEMA 7 & 9
Explosion proof enclosure
One button control
Button: 6 amp @ 125VAC
Normally open
Metal Enclosure: H=6-1/8" W=3" D=4-3/8"

.......more details

18002

Doorlec Reducer #80

K1A6426-2

LiftMaster Control Board for RSL12V / RSW12V ** USE K001A6426-2

28-01114

Truck Door 1" Std Vert. Track and Angle Assbly J Style Curbside (RH) 120" Todco Style

For Todco style doors
Galvanized steel 14-gauge construction
Includes J-style channel mounting angle with track and operator bracket
Fits door sizes 101 - 114" high
Cross ref: T #49014-2 T #41034-2 & W #4045

1004-134-12'

Aluminum Bottom Retainer 1 3/4" U-Shape with Reinforcement 12 ft**Actual Length 12'2"***

For door thickness 1-3/4"

MI00001

Micanan Motor Pulley 5L 5/8" ID x 2" OD

PRECUT-GALV

Special Order Pre-Cut Galvanized Spring Made to Order

2376.171_22.840

Whiting Torsion assembly .171 wire size 22" spring length 84" shaft

K76-34740

LiftMaster Limit Passpoint Kit

Kit Includes: Learn Limit Switch Learn Limit Nut Limit Shaft Assembly Sprocket and Wire Harness
For RSL12V RSL12VH
Aslo called Learn Limit Assembly Kit

2376.206.35.930

Whiting Torsion assembly .206 wire size 35" spring length 93" shaft

K1D6761-1CCMC

LiftMaster Logic Board AC for SL585U & UL SL595U & UL SL3000U & UL

K1D6761-1CCMC is a AC UL325 Logic Control Replacement Board. •For use with SL585 SL585 SL3000 Slide gate operators manufactured after 2016.
This board is backwards compatible for older second generation units but Monitored Photoelectric Sensor (LMRRUL) or Edge Sensor (LMWEKITU & S505AL) to protect the OPEN en entrapment zone are required.
Also known as: K1D9088-1CC K1D6761-1CC