Devanco Canada - Get The Right Garage Door Opener‎ and Parts

.295-334-L-C

Cut-to-Length Torsion Spring .295 x 3-3/4" Left Hand Wound Coated ** Price by Quote Only

Priced per inch
For factory installed cones priced seperately - use part no. C-375-INSTALLED

LB810-24

Laminated Bumper Standard Black 10" x 24" 8" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

PRO-T-5081-U

Micanan 1/2HP 208V 1P Trolley Operator N1 Eyes Monitored ECB

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#410 roller chain on 1/2 HP models
Monitored board
On-Board receiver holds up to 20 transmitters

PRO-GT-15043-U

Micanan 1-1/2HP 460V 3P Worm Gear Trolley Operator N1 Eyes Monitored ECB

On-Board receiver holds up to 20 transmitters

K23-30716

LiftMaster Stop Switch 120VAC 6A

Same as 20-30716

41D0216-2

LiftMaster End Panel with Light Socket

Compatible with LiftMaster® 8550WL & 8360WL Models; and various garage door openers manufactured after 2017 only
Circuit board not included

H11G08-SS

Hinge #8 x 11 gauge Stainless Steel

Manufactured with 11ga. Rust-Resistant 304 Stainless Steel
Universal Design
Fits Most Overhead Sectional Doors
Priced Per Each

2376.156.19.780

Whiting Torsion assembly .156 wire size 19" spring length 78" shaft

K71-D575-1

LiftMaster Drum Brake Kit 3 Ph 575V (Late Model Logic 5 Shoe and Drum Models)

Internal Solenoid Drum Brake with Cable Replacement Kit.
Compatible with LiftMaster® Logic 5.0 Model T SD J H and HJ Industrial-Duty Operators.
Complete service kit includes: Solenoid Cover Brake Solenoid Brake Drum Cable Mounting Plate and Installation Hardware.
Quiet preferred sound profile
Industry benchmark stopping performance with adjustability
Significantly reduced modes of failure

.......more details

Installation manual Manuel d'installation

1014-1-5/8-14'

Rigid Vinyl Bottom Retainer Notched 14' Long

Black - for door thickness of 1-5/8"

9372054125

Square Torsion Spring .343 x 5-1/4 x 41.25" with Cones LHW

41.25" long = 160 coils

GALV-295-258-144-L

Torsion Spring .295 x 2-5/8" x 12ft LH Galvanized Blue

Wire size: .295
Inside diameter: 2-5/8"
Length: 12 ft
Galvanized Stenciled

.343_5-1/4"-RH

Torsion Spring .343 x 5-1/4" x 12ft RH Blue/Red

Wire size: .343
Inside diameter: 5-1/4"
Length: 12 ft

CH755L5-RH

LiftMaster Hoist Op. with Carwash Mod. 3/4 HP 575 VAC 3 Ph Logic 5 Right Hand ***Replaced by CRBH755L5-RH

Industrial Duty Hoist Operator with Damp Environment modification.
Comes with CPS-UN4 photoeyes

Installation Manual Manuel d'Installation Sell sheet Brochure

1005-1-3/8-24'

Aluminum Bottom Retainer U-Shaped 24' Long *** 24' is DISC

For door thickness 1-3/8"

1019-1-3/8-24'

Rigid Vinyl Bottom Retainer Flat 24' Long

Black - for door thickness of 1-3/8"

MOUNTSHAFT007

Manaras Clutch Shaft Kit for MTBH with 5/8" Shaft

For operators made with a 5/8" shaft
For very old model MTBH built with 1" shaft - use part number MOUNTSHAFT017

Drawing

.393-6-L

Cut-to-Length Torsion Spring .393 x 6" Left Hand Wound Orange

Priced per inch - cones & filler sold seperately
For factory installed cones use part no. C-600-INSTALLED

1006-1-3/4-14'

Rigid Vinyl Bottom Retainer U-Shaped 14' Long

Black with flexible fin to touch door face.
For door thickness 1-3/4"

6X15SC50

Devanco Loop 6' x 15' saw-cut 50' lead-in

Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
Ideal for use on existing asphalt or concrete surfaces
Features a non spliced continuous wire throughout loop turns and lead-in.
requires the use of loop sealer when being installed to ensure long lasting trouble-free detection

Installation Instructions Instructions d'installation Loop Placement Guide Guide de positionnement des boucles

LB812-18

Laminated Bumper Standard Black 12" x 18" 8" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

B

Molded Rubber Bumper Black 24" L x 12" W 3" Projection 4-Hole 2 Reflectors Sold Individually

Manufactured from reinforced prime rubber
Rectangular horizontal mount
Ideal for light traffic loading docks.
Molded bumpers are molded in one piece and will not warp rust rot or harden.
Perfect protection for in-plant wall protection from forklifts and other material handling vehicles.
Bumper comes with 6 pre-drilled countersunk mounting holes drilled to accept 3/4" anchor bolts

.......more details

.225-2-5/8-LH-C

Torsion Spring .225 x 2-5/8" x 144" LH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .225 ID: 2-5/8" Length: 12 ft

180210

Decorative Pull Handle Aspen-V3 Style 10-1/4" Stamped Steel Sold per piece

As seem on carriage house doors

HSC-600-JAWS

Replacement Jaws for Hand Swager

Can be used as replacement jaws for both the HSC-600 hand model and the HSC-600-B bench model

218014-02

Lamp Socket Assembly

For models LSO LCO LDO

.393-334-L-C

Cut-to-Length Torsion Spring .393 x 3-3/4" Left Hand Wound Coated ** Price by Quote Only

Priced per inch - cones & filler sold seperately
For factory installed cones use part no. C-375-INSTALLED

.343-334-L

Cut-to-Length Torsion Spring .343 x 3-3/4" Left Hand Wound Blue/Red

Priced per inch - cones sold seperately
For factory installed cones use part no. C-375-INSTALLED

2235.096

Whiting Coldsaver Bottom Panel 14-1/2" x 96" with seal and retainer

Fits Coldsaver Roll-Up Doors
1-1/8" thick 96" wide

.343-6-R-C

Cut-to-Length Torsion Spring .343 x 6" Right Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-600-INSTALLED

9003-17FT-BLACK

Commercial Side & Top PVC Weather-Strip Reverse Angle 3" Track Bolt On 17' Long - Black

Black rigid vinyl retainer with black flexible vinyl insert.
Reverse angle bolt-on vinyl retainer.
Bolts onto reverse angle steel jamb.

Drawing

PRO-GT-15021-U

Micanan 1-1/2HP 230V 1P Worm Gear Trolley Operator N1 Eyes Monitored ECB

On-Board receiver holds up to 20 transmitters

.421_6"-RH

Torsion Spring .421 x 6" x 12ft RH Gold

Wire size: .421
Inside diameter: 6"
Length: 12 ft

ME120-Y-2WIRE-R

Miller Edge Yellow 2-Wire NM Right Hand Outlet Sold per Foot

Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
Touch sensitive signaling
Temperature range: -30F to 155F
Lead wire: 18 gauge 2ft length
Sensitivity: nominal 4 PSI
2 wire NO configuration

.......more details

MYQ-C43ACXW

LiftMaster MYQ Outdoor Wired Camera Weather resistant Motion detection & 2-way talk

4-hour Proactive Security: Automatically locks & closes compatible doors and garages when it detects a person during pre-scheduled times ensuring your home is always secure. Video plan monitoring required. Complete Visibility: Capture every detail with 1080p full HD video featuring a 130º wide-angle lens and a 360º adjustable swivel lens for comprehensive coverage plus two-way communication for remote interaction. Vivid Night Vision: Enjoy color night vision for crystal-clear 24/7 image quality regardless of time of day. All Weather Reliability: Built to withstand the elements with reliable long-lasting performance rated to operate in temperatures from -4ºF to 122ºF. Quick and Easy Setup: Get set up in no time with integrated Bluetooth a fully adjustable mount and 25-foot power cord. Premium Smart Features: With smart detection features receive intelligent alerts that quickly show what triggered the camera and when. Record and save events for up to 30 days.

1104-16FT-DK-SAND

Residential Side & Top PVC Weather-Strip with cap 16' Long - Dark Sandstone (DDG)

Sandstone rigid vinyl retainer with dark sandstone flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.
Also known as Taupe

K07-8003

LiftMaster lower Crank Link BG770/790 Barrier Gate

For use with BG770/790 barrier gate operator

K07-8004

LiftMaster Upper Crank Link BG770/790 Barrier Gate

For use with BG770/790 barrier gate operator

CYL-3BXLT

Replacement Cylinder Only for 3BXLT Comes with 2 Keys

PRO-HBH-10083U-R

Micanan 1 HP 208V 3P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Right Hand

1 HP208V 3 PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
N-1 Through-beam (MK-00649) photocells included. Other options available.
3-btn o/s/c (02-103) wall control station included
Adjustable Friction Clutch 5L320 drive belt
#50 Roller chain 18 tooth door sprocket included

.......more details

MX000641

HySecurity Left Counterweight Mount for StrongArm

Compatible with StrongArm systems
Designed for left-hand configurations
Supports balanced gate movement
Reduces strain on gate operators

R4AES

Erone Radium 4-Button AES128 Encrypted Remote

Compatible with any high-security AES128 wireless receivers they were designed to prevent the cloning of remotes
The code sent by the remote changes at each activation removing any scanning and copying risk.
A special algorithm ensures a continuous synchronization between the receiver and transmitter
Includes AES128 encryption
Compatible with RADIUM AES128 receivers
Range up to 820 ft (250 m)

.......more details

K20-1050C-2LP-H26

LiftMaster Electric Motor 1/2 HP 115V 1Ph Logic 5

Also known as: K20-1050C-2LP-H24
1/2HP Motor Replacement Kit (115/230V 1PH L5).
For use with various LiftMaster® 1-Phase Logic 5.0 Commercial Door Operators and Commercial Access Systems

2807.192.290

Whiting .192 x 2-3/16 x 29" Curbside with Cones

K79-13493A-400

LiftMaster FDOA Control Board 400 Chip

400 Chip Fire Door Operator Replacement Kit

2200-367

Linear Chain Tension (Light) Spring

Used on various Linear Gate operators

GALV-319-6-144-L

Torsion Spring .319 x 6" x 12ft LH Galvanized Blue/Green

Wire size: .319
Inside diameter: 6"
Length: 12 ft

2806.200.280

Whiting .200 x 2-3/16 x 28" Roadside with Cones

2376.206.35.940

Whiting Torsion assembly .206 wire size 35" spring length 94" shaft

5423.105

Whiting Side Seal 105" 5/16" Track Spacing

Quote required prior to sale to ensure correct fit

7176.235*34.930

Whiting Heavy Duty Torsion Assembly .235 x 34" shaft 93"

CP-SP-ARM-REL

Lynx Barlock Spring

K41-0240-000

LiftMaster Idler Sprocket Qty 2 IHSL24UL

41-0240-000 is a Idler Sprocket Service Kit. Compatible with LiftMaster® IHSL24UL Series Industrial Heavy Duty Slide Gate Operators. Complete kit includes: (2) Idler Sprockets. Check the installation manual or replacement parts diagram for specific part information before ordering to ensure compatibility.

7176.218*325.910

Whiting Heavy Duty Torsion Assembly .218 x 32.5" shaft 91"

OSHW-6112-M-N4-L

Manaras Opera-SH w/Carwash Mod 1/2HP 120V 1Ph Mon ECB w/N4 Photoeyes Left Hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
Solenoid activated Brake

.......more details

ME210-C3

Miller Edge Black Rigid PVC Mounting Channel "L" Shape Sold by the Foot

Used on CPT-210 extrusion

K94-37848-2

LiftMaster Electric Motor 1.5HP

Replacement motor for SL595151U •1.5HP 1PH 120/208-240VAC

K41-0256-000

LiftMaster Interlock Harness IHSL24UL

GALV-343-258-L

Cut-to-Length Torsion Spring .343 x 2-5/8" Left Hand Wound Galvanized Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

GALV-319-258-L

Cut-to-Length Torsion Spring .319 x 2-5/8" Left Hand Wound Galvanized Blue/Green

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED
Galvanized

GALV-319-334-L

Cut-to-Length Torsion Spring .319 x 3-3/4" Left Hand Wound Galvanized Blue/Green

Priced per inch - cones sold seperately
For factory installed cones use part no. C-334-INSTALLED
Galvanized

DOCK-SEAL-R100

Dock Seal R-100 Fixed Header Seal Price by Quote Only

Made to order - Price varies according to specifics
This model is ideal for door openings of 8′ wide x 8′ high
Standard Seals include two side pads with a fixed head pad and option for an adjustable head curtain.
40 Oz Vinyl
Comes with full height yellow guide strips and option for wear flaps
Black Blue and Green are stock colors for other colors there will be a surcharge as well as longer production time

.......more details

K41-0375-000

LiftMaster 24VDC Motor Gear Box Encoder (Jackshaft 1200)

Maxum J-1200

8087.207.320

Whiting .207 x 2-5/8 IN x 32" Curbside with Cones

An original Whiting assembly

K41-0253-000

LiftMaster Electric Motor INSL24UL

Compatible with LiftMaster® INSL24UL Series Industrial Lite-Duty Slide Gate Operators

GALV-393-6-144-R

Torsion Spring .393 x 6" x 12ft RH Galvanized Orange

Wire size: .393
Inside diameter: 6"
Length: 12 ft
Galvanized Stenciled

GHX-353-1HP-RH

Doorlec Explosion Proof Gear Head 1 HP 575V 3PH ECB Right Hand

Nema 7/9 control box
Electrical connections from motor to control box consists of hazardous location certified fittings
NEMA 7/9 O/C/S push-button station included

OSH-6232-M-N1-RH

Manaras Opera-SH 1/2 HP 208V 3 Ph Monitored ECB w/N1 Photoeyes Right Hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"

Installation Manual

19-50HL-SS

Half (Offset) Link #50 Stainless Steel

For #50 chain

2704.177_13.5

Whiting Roadside Torsion Spring 2-3/16" ID 13-1/2" Long

Torsion spring wire only
.177 wire size

2376.162.19.770

Whiting Torsion assembly .162 wire size 19" spring length 77" shaft

GALV-343-258-144-R

Torsion Spring .343 x 2-5/8" x 12ft RH Galvanized Blue/Red

Wire size: .343
Inside diameter: 2-5/8"
Length: 12 ft
Galvanized

GALV-283-334-144-R

Torsion Spring .283 x 3-3/4" x 12ft RH Galvanized White

Wire size: .283
Inside diameter: 3-3/4"
Length: 12 ft
Galvanized Stenciled

GALV-234-258-144-R

Galvanized Torsion Spring .234 x 2-5/8" x 12ft RH Blue/White

Wire size: .234
Inside diameter: 2-5/8"
Length: 12 ft

EMX-1916-1

EMX Single Gold Hood For IRB-MON2/4X2 1 Piece Only

Gold coloured metal hood (1 hood)

BEA-10LIGHTBKT-TL

BEA Modular LED Signal Light Bracket

Bracket only for modular LED lights.

BEA-10LIGHT-TG

BEA Modular LED Signal Light Segment Green

Signal lights for industrial and vehicle flow management applications.
LED signal modular lights offer customizable configurations with “build-your-own” lighting elements that share a common base and bracket.
These LED signal units are available in red green yellow and an audible alarm cap and can be stacked in a tower configuration with up to six modules.
Operating temperature: -40 to 122F
Nema 4/IP65
Base sold separately

.......more details

User Guide Datasheet

2806.156.170

Whiting .156 x 2-3/16 x 17" Roadside with Cones

2807.156.170

Whiting .156 x 2-3/16 x 17" Curbside with Cones

2376.162.18.920

Whiting Torsion assembly .162 wire size 18" spring length 92" shaft

K94-37849-1

LiftMaster Electric Motor 1HP 3-phase

Replacement motor for SL595103U and SL595103UL

MOD024D

Manaras Nema 4 3 Phase Control Panel w/ECB ** Modification to Operator Only

Price by quote only

K20-8100M-DC

LiftMaster Motor 1HP 90VDC 1PH

K20-8100M-DC is a 1HP Motor Replacement Kit (90VDC BM CF). For use with various LiftMaster® 1HP 1-Phase Commercial Door Operators and Gate Operator Systems

2376.200.30.870

Whiting Torsion assembly .200 wire size 30" spring length 87" shaft

2704.148_140

Whiting Roadside Torsion Spring for Cube Truck Roll-Up Doors 14" Long

Most common torsion spring for cube trucks
Specs: .148 x 2-3/16" x 14" Long
For Curbside order part # 2705.148*140

2705.143_150

Whiting Curbside Torsion Spring for Cube Truck Roll-Up Doors 15" Long Galvanized

torsion spring for cube trucks with small roll-up door
Specs: .143 x 2-3/16" x 15" Long
For Roadside order part # 2704.143*150

2807.171.250

Whiting Spring Assby .171 x 2-3/16 x 25" L Curbside

Replacement torsion spring with cones
Specs: .171 x 2-3/16" x 25" Long
For Roadside order part # 2806.171.250

SPRAY-523

Aluminum Touch Up Spray Paint 350g Slate / Charbon #523

350g

GDI-HB331

GDI Direct Drive & Jackshaft HAML-RBH-2030 Nema 1 To Accept 1-1/4" Shaft Non Monitored

Compact & Light Weight - Fast Installation
Applications Include Car Wash Cold Storage Pharmaceutical Agricultural Food Facility Sectional Grilles and Rolling Steel Doors
Brushless DC High Reliability Hi Efficiency & Low Maintenance Motor
No maintenance GearMotor sealed stainless steel bearings no limit switches no belts or hydraulic cylinders to maintain
One Operator Handles all AC Voltage Applications (115/208/230/460 & 575V)
Soft start soft stop

.......more details

OTBH-6113-1-M-N1

Manaras Trolley Operator 3/4HP 120V 1Ph Monitored w/N1 Eyes

Heavy-duty low headroom trolley operator designed for use on industrial standard lift sectional door
25 cycles per hour 80 cycles per day
It incorporates a drum-band type solenoid brake.
Tracks are an extra 36 lbs per track
3/4 HP & 1 HP operators come with #41 full roller chain
Includes PHOTO-070

.......more details

80352.4200

Todco Nut Hex 1/4"-20 PLTD

K07-8064

LiftMaster Lower Crank BG790

Also known as: G078064 07-8064

2376.162.18.870

Whiting Torsion assembly .162 wire size 18" spring length 87" shaft

2376.177.25.930

Whiting Torsion assembly .177 wire size 25" spring length 93" shaft

2376.182.275.930

Whiting Torsion assembly .182 wire size 27-1/2" spring length 93" shaft ** price by quote only

This is a full balancer assembly
Twin springs one road one curb with a shaft through it

GHX-353-3/4HP-LH

Doorlec Explosion Proof Gear Head 3/4 HP 575V 3PH ECB Left Hand

Nema 7/9 control box
Electrical connections from motor to control box consists of hazardous location certified fittings
NEMA 7/9 O/C/S push-button station included