Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home Your Search Low Headroom
K86-RP10-208

LiftMaster Roll Pin 5/16" x 2-1/2"

  • Also known as: G86RP10208 86RP10208 86-RP10-208
CDJH-34-115-ECB

Lynx CDJH Heavy-Duty Jackshaft 3/4 HP 115V with ECB Right Hand UL325

  • 3 Button station (NEMA 1)
  • 1650 RPM high starting torque motor with overload protection
  • Inherent Mechanical Brake (I.M.B)
  • B2 Mode C2 Mode D1 Mode E2 Mode T Mode TS Mode
  • On board Open Close & Stop for ease of setting limits
  • Pre-wired to accept sensing devices
    • .......more details
26CW945255

Truck Door Intermediate Panel (15.5" x 98") Painted White for Whiting Dryfreight

  • These panels are 15.50" height x 98" width.
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • 3/4" thick 7 ply exterior grade medium density plywood.
  • Painted white
11-10014

LiftMaster Clutch Shaft

  • Commercial door opener clutch shaft
  • 11 7/8" Long; 1/2" Wide
CGH103L5-RH

LiftMaster Gearhead w/ Brake and Carwash Mod. 1 HP 208/230/460V 3-Phase Logic 5 Right Hand

  • Requires 828LM MyQ Internet Gateway to connect to MyQ Smartphone App.
  • Security+ 2.0®
  • Includes CPS-UN4
K75-19978-L

LiftMaster Frame Plate Kit Left Hand Disconnect

  • For use with various LiftMaster® Hoist and Jackshaft Commercial Door Operators
.25W8.2

Resistor 1/4 W 8.2K OHM

  • Dimensions (W X H X L) 6 X 15 X 3 CM
K75-19978-R

LiftMaster Frame Plate Kit Right Hand Disconnect

  • For use with various LiftMaster® Hoist and Jackshaft Commercial Door Operators
K94-37871

LiftMaster Reset Switch and Harness SL595

  • For model SL595 slide gate operators
ETB-321-1/2HP

Doorlec 1/2HP 230V 1PH Trolley Door Opener

  • Trolley model heavy-duty door operator designed to provide smooth dependable operation of sectional overhead type doors.
10.1063.9

Whiting S.S Serrated Flange Lock Nut 1/4-20

CGH203L5-LH

LiftMaster Gearhead with Brake & Carwash Mod. 2 HP 208/230/460V 3P L5 Left Hand

  • Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
  • GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
  • MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
  • Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
  • Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.
    • .......more details
EPC-1

Accessory Hardware Kit for Gate Track for 3-1/2" Pipe *** Price by Quote Only

  • Includes guides rollers & hardware
K72-33889

LiftMaster Clutch Shaft Kit

  • Clutch Shaft Kit for MJ Jackshaft Operators
  • Complete with: Clutch Plate Clutch Shaft Bearing Sprocket 5L Belt Motor Pulley Spring Clutch Disk Shim Washers Castle Nut Flatwashers Cotter Pin Roll Pins and Push on Fastener
  • Same as 308117101K 310115111 K7212589 K72-12589 71116121J
2376.192.29.910

Whiting Torsion assembly .192 wire size 29" spring length 91" shaft

  • This is a full balancer assembly
K20-3050C-4P

LiftMaster Electric Motor 1/2 HP 208/230/460V 3Ph L3 L4 L or M

  • Standard 1/2 hp motor
  • This is a replacement Motor Kit (1/2 HP 230/460V 3PH CF)
  • For use with various LiftMaster® Three Phase Gear-Reduced Commercial Door Operators and Slide Gate Operators
  • Also known as: 6002242 K20-3050C-4 203050 K20-3050C4 20-3050C-4 203050C4 20-3050C-4P
2376.177_25.900

Whiting Torsion assembly .177 wire size 25" spring length 90" shaft

26CW94623-CUT

Truck Door Top Panel Painted White (13" x Cut-to-Size) for Whiting DryFreight

  • These panels are cut to an extra wide width to fit wider vehicle applications
  • Interlocking tongue and groove design for weather-tight joint and proper alignment.
  • Non-routed
  • .75" thick 7 ply exterior grade medium density plywood
  • Painted white
GOFF-G2-LITE-3000

Goff High Performance Door Made to Order

  • Custom made to spec
1004-134-10'

Aluminum Bottom Retainer 1 3/4" U-Shape with Reinforcement 10 ft**Actual Length 10'2"***

  • For door thickness 1-3/4"
.406-514-L-C

Cut-to-Length Torsion Spring .406 x 5-1/4" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones & filler sold seperately
  • For factory installed cones use part no. C-514-INSTALLED
.375-334-R-C

Cut-to-Length Torsion Spring .375 x 3-3/4" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-375-INSTALLED
.343-514-L-C

Cut-to-Length Torsion Spring .343 x 5-1/4" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-525-INSTALLED
  • If cones are required a filler must be added use part # FILLER
.331-514-L-C

Cut-to-Length Torsion Spring .331 x 5-1/4" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones and filler sold seperately
  • For factory installed cones use part no. C-514-INSTALLED
  • For spring filler use part no. SPRING-FILLER
.319-334-R-C

Cut-to-Length Torsion Spring .319 x 3-3/4" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch. Cones sold separatly.
  • For factory installed cones order part # C-375-Installed
.306-334-R-C

Cut-to-Length Torsion Spring .306 x 3-3/4" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-375-INSTALLED
218759

Torque Force Spring Failure Device 1-1/4" Shaft Right Hand Side

  • For springs 2" up to 6"
  • This device can be applied on Industrial OH doors that are manual or motor operated
  • Must be installed on a keyed shaft
PRO-GH-5083U-R

Micanan 1/2HP 208V 3P Gearhead Operator N1 Eyes Monitored ECB Right Hand

  • Includes 3-btn O/C/S control station Nema 1
  • External radio control terminal strip
  • Heavy duty worm gear reduction in oil bath gearbox
  • Solenoid brake standard
  • #50 roller chain and sprockets on final drive
  • Emergency chain hoist with electrical cut-out switch for manual operation
    • .......more details
Installation manualSpecification sheet
PRO-HBH-7543U-R

Micanan 3/4HP 460V 3P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Right Hand

  • 3/4 HP460V 3PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
  • Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
  • N-1 Through-beam (MK-00649) photocells included. Other options available.
  • 3-btn O/S/C (02-103) wall control station included
  • Adjustable Friction Clutch 5L320 drive belt
  • #50 Roller chain 18 tooth door sprocket included
    • .......more details
PRO-HB-7553U-LH

Micanan 3/4HP 575V 3P Hoist Op. with Brake N1 Eyes Monitored ECB Left Hand

  • Continuous duty belt drive jackshaft operator with emergency chain hoist
  • Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
  • Nema 1 photoeyes included
  • Solenoid brake included
2376.206.325.910

Whiting Torsion assembly .206 wire size 32-1/2" spring length 91" shaft

PRO-H-5043-U-RH

Micanan 1/2HP 460V 3P Hoist Operator N1 Eyes Monitored ECB Right Hand

  • Continuous duty belt drive jackshaft operator with emergency chain hoist
  • Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
  • Nema 1 photoeyes included
  • Solenoid brake OPTIONAL
MK-00705

Micanan Harness 3-Phase 5-Relay Board

MK-00696

Micanan 4-Pole Terminal Strip

MK-00039

Micanan Overload Reset 1-Phase 10 Amps

MV-00004

Micanan 2-btn O/C Nema-1 Pushbutton Control Station

  • Flush mount
.312-514-R

Cut-to-Length Torsion Spring .312 x 5-1/4" Right Hand Wound Yellow

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-514-INSTALLED
.243-334-L

Cut-to-Length Torsion Spring .243 x 3-3/4" Left Hand Wound White/Yellow

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-375-INSTALLED
60-7242

Econo Caution Sign English 14" x 10"

60-7248-WC5810

Wheel Chock Safety Pkg incl'd: chock wall bracket 15' chain 3/16" quick link (2) & English Caution Sign

  • System Includes (1) WC-5810 Chock Bracket Chain Tie Back Chain and English Caution Signs
  • Solid Rubber Construction
  • Hook for chain fastening
  • Long Lasting 80 Durometer rubber
  • Size: 8" wide x 10" long x 5" high
15475

Doorlec Heater Strip 250 W 208/230 V

MK00594

Micanan Auxiliary Contact Block 100FA40

LB912-18

Laminated Bumper Standard Black 12" x 18" 9" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4†rods
  • Bumper is fastened to dock surface with 3/8†steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8†diameter.
    • .......more details
LB912-14

Laminated Bumper Standard Black 12" x 14" 9" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4†rods
  • Bumper is fastened to dock surface with 3/8†steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8†diameter.
    • .......more details
LB910-14

Laminated Bumper Standard Black 10" x 14" 9" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4†rods
  • Bumper is fastened to dock surface with 3/8†steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8†diameter.
    • .......more details
LLB620-22

Laminated Bumper Black 6" Projection L-Shaped 20" x 22" Sold Individually

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4†rods
  • Bumper is fastened to dock surface with 3/8†steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8†diameter.
  • This model has angles on both sides
    • .......more details
LVB624-11

Laminated Bumper Black 6" Projection Vertical Installation 24" x 11" Sold Individually

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4†rods
  • Bumper is fastened to dock surface with 3/8†steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8†diameter.
    • .......more details
LB610-24

Laminated Bumper Standard Black 10" x 24" 6" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4†rods
  • Bumper is fastened to dock surface with 3/8†steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8†diameter.
    • .......more details
LB610-14

Laminated Bumper Standard Black 10" x 14" 6" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4†rods
  • Bumper is fastened to dock surface with 3/8†steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8†diameter.
    • .......more details
41A4371

LiftMaster Belt Cap Retainer

  • Same as 41C4371
K74-18346

LiftMaster Limit Shaft Kit

  • Compatible with LiftMaster® Model GH 5HP Commercial Door Operators
MB-03001

Micanan Electric Motor Only 1 HP 110/220V 1PH Base Mount O.D.P FR56

  • Base mount motor fits: T TB APT J EJ H EHJ HHD SD
2807.139*170

Whiting .139 x 2-3/16 x 17" L Curbside with Cones

  • For Roadside order part # 2806.139.170
41C5497

LiftMaster Wiring Harness Kit High Voltage

  • For use with various LiftMaster® and Chamberlain® AC Chain Drive Garage Door Openers; manufactured after 2001
7001-16-BRONZE

Commercial Side & Top Weather-Strip 16' Long - Bronze (BZ)

  • Bronze galvanized steel with bronze dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
  • Full case quantity only (10)
7001-8-BRONZE

Commercial Side & Top Weather-Strip 8' Long - Bronze (BZ)

  • Bronze galvanized steel with bronze dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
  • Full case quantity only (20)
2376.206.30.930

Whiting Torsion assembly .206 wire size 30" spring length 93" shaft

AW12K500-18

Miller Edge Air Wave Kit 18ft No Coil Cord

  • Kit Includes: AW12 Air Wave Switch Barbed Coupler (18') RAH-500 1/2" dia. Rubber Hose Wire Nuts End Plugs
MD00422

Micanan Lovejoy Rubber 3JE Sleeve

2806.192.340

Whiting .192 x 2-3/16 x 34" Roadside with Cones

2807.192.340

Whiting .192 x 2-3/16 x 34" Curbside with Cones

4007-14FT

Aluminum Retainer only for Light Brush 90 degree

  • For angle application
  • For use with Light Brush or Vinyl Insert.
  • die # A-25060
39913625

Hitch Pin Forged Wire Handle 3/4" x 6-1/4" Red

  • Usable length is measured between the shoulder and the cotter pin
111537.0001.S

Overhead Sprocket 38T 1/4P

  • Sprocket for the limit shaft
  • For the 1/2 hp 3/4 hp & 1 hp hoist RHX operator.
K001A5859

LiftMaster Elite Dual Motor Circuit Board Q171 ** NLA

  • Old style fits SL3000 CSW 200 with Q019 boards only
  • This board has been discontinued and no replacement available
K75-34824

LiftMaster Chain Guard Kit for SL575GL SL585GL SL585U slide gate operators

  • Complete with: Chain Guard Chain Guides and Retainers.
  • Works with SL575GL SL858GL and SL585U
2650-112-06

Linear Cold Weather Package 230V SLR gate Op. Only

  • Cold weather package includes: Arctic oil Heater Cogged V-belt
PRO-HBH10011U-R

Micanan 1 HP 115V 1P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Right Hand (Pro-HHD)

  • 1 HP115V 1 PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
  • Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
  • N-1 Through-beam (MK-00649) photocells included. Other options available.
  • 3-btn o/s/c (02-103) wall control station included
  • Adjustable Friction Clutch 5L320 drive belt
  • #50 Roller chain 18 tooth door sprocket included
    • .......more details
60-7254

Wheel Chock Wall Bracket Anchors 4/pkg 3/8" x 1-7/8"

  • Anchors only. Set of 4
5001-WG-14-MOAK

Residential Side & Top Weather-Strip 14' Long Wood Grain Medium Oak with Screws

  • PVC wrapped
  • Painted aluminum retainer
  • Dual fin vinyl
  • Painted screws to match. 1 screw per foot
  • Sold by full case quantity (20)
5001-WG-10-MOAK

Residential Side & Top Weather-Strip 10' Long Wood Grain Medium Oak with Screws

  • PVC wrapped
  • Painted aluminum retainer
  • Dual fin vinyl
  • Painted screws to match. 1 screw per foot
  • Sold by full case quantity (20)
5001-WG-9-MOAK

Residential Side & Top Weather-Strip 9' Long Wood Grain Medium Oak with Screws

  • PVC wrapped
  • Painted aluminum retainer
  • Dual fin vinyl
  • Painted screws to match. 1 screw per foot
  • Sold by full case quantity (20)
PBTL3-BLACK

Replacement Button Only - N/O Open / Close Black

  • N/O switch and rubber cover for PBTL-3
2704.192_340

Whiting Roadside Torsion Spring 2-3/16" ID 34" Long

  • Torsion spring wire only
  • .192 wire size
EH5761-A19

Automatic Systems Round Arm Assembly BL27 14'-9 (4.5M)

  • French description: Ensemble Lisse Ronde 4.5m (14'-9")
  • For model BL27 gate operator
ME123-M-BLK-END

Miller Edge Black End 4-Wire Monitored 2" wide x 1-1/2" high Sold by the Foot

  • Electromechanical slide in edge for sectional doors and sliding gates.
  • Touch sensitive singaling allows for immediate stopping and reversing of motion
  • Temperature range: -30F to 155F
  • Lead wire: 22 gauge universal
  • Sensitivity: nominal 6-8 PSI
  • 2 wire NO configuration
    • .......more details
WorksheetInstallation manualSell sheet
9372263800

Square Torsion Spring .375 x 6 x 38" with Cones LHW 1-1/4" Bore

K72-34818

LiftMaster Limit Shaft Kit SL575/585

  • Complete with: Limit Shaft Limit Nuts Limit Bearings Limit Sprocket Shim Washers Compression Ring Roll Pin and E-Ring.
MGS20-Y-2L-05

Miller Edge Sensing Edge Square Yellow 2-Wire Left Hand Outlet 5ft Long

  • €¢Electromechanical edge for standard 2" round or square frame sliding sing and bi-part gates. •3-sided activation allows for immediate stopping or reversing of motion •Contours to round or square posts. •Temperature range: -30F to 155F •Lead wire: 18 gauge 2ft length •Sensitivity: nominal 6-8 PSI •2 wrie NO configuration •ANSI/UL325 recognized component •Cannot be bent •One year warranty
4X16SC50

Devanco Loop 4' x 16' saw-cut 50' lead-in

  • Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
  • Ideal for use on existing asphalt or concrete surfaces
  • Features a non spliced continuous wire throughout loop turns and lead-in.
  • requires the use of loop sealer when being installed to ensure long lasting trouble-free detection
Installation InstructionsInstructions d'installationLoop Placement GuideGuide de positionnement des boucles
K72-19975

LiftMaster Clutch Shaft and Sprocket Assembly

  • Assembly includes: Clutch shaft 1" keyed flange bearings Dual sprcket 32/14 Splined core sprocket E-ring Compression spring Pulley assembly Washers Thrust bearing Retaining ring Slined hub and roll pin
  • Compatible with DJ J operators
CPT-210-K5

Miller Edge Non-Monitored End Plug Kit *** Discontinued

  • For use with CPT-210-50 bulk extrusion
  • Kit includes: 5 wired 5 non-wired end-plugs 1oz tube of adhesive
PB-BE101BP

Contact Block N/O Contact

  • Base mount
  • For use with RC P enclosures. IP65
29-17A3CO

LiftMaster Safety-Pack for N7 Operators

  • Intrinsically safe control circuit
  • K160-0192 is a Safety Relay Service Kit for various LM commercial ops
26-40029

Truck Door U-Channel Seal Retainer 98" Long for Whiting DryFreight Doors ** To Extent of Inventory

  • Aluminum extrusion construction
  • For use with Bottom Seal #26-40027
ME123-C3

Miller Edge L-Shaped PVC Mounting Channel Sold by the Foot

  • 2" Wide 1-1/4" High
9382054125

Square Torsion Spring .343 x 5-1/4 x 41.25" with Cones RHW

  • 41.25" long = 160 coils
27-48-160

Extension Spring 8' Door - 160 lbs Brown

  • Single - Loop
  • 27" long 48" stretch 160 lb load
  • Sold individually
  • Rated for 10000 cycles
Spec Sheet
SL532COP

Copper Sleeve 5/32" 100 Sleeves per Pkg *price on request

  • Oval sleeves ONLY
  • Stops sold separately part # ST532COP
ST532COP

Copper Stop 5/32" 100 Stops per Pkg *price on request

  • Stops ONLY
  • Sleeves sold separately part # SL532COP
.295-2-RH-C

Torsion Spring .295 x 2" x 144" RH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .295 ID: 2" Length: 12 ft
Q310

LiftMaster Surge Protection for MIR-1 ( K74-50271) ** DISCONTINUED

  • For the Miracle-One single arm gate operator
  • Same as part no. K74-50271
K72-12563

LiftMaster Clutch Shaft Kit for Model H Prior to 2005

86-RP08-108

LiftMaster Roll Pin Long 1/4" x 1-1/8" Coiled 10/Pkg (K-SPLONG)

  • Same as K-SPLONG
790

Fasteners Hex Nut 3/8-16 1000/Box

7001-10-CREAM

Commercial Side & Top Weather-Strip 10' Long - Cream (C)

  • Cream galvanized steel with cream dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
  • Also known as Almond
  • Full case quantity only (20)
7001-8-CREAM

Commercial Side & Top Weather-Strip 8' Long - Cream (C)

  • Cream galvanized steel with cream dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
  • Also known as Almond
  • Full case quantity only (20)
165-B

Fusible Link For Loads 1 to 10 lbs

  • Length is 1.4328" width is .563"
  • Distance between center is .938"
  • Priced per each
  • Fire rated at 165 degrees Fahrenheit
3X6PO50

Devanco Loop 3' x 6' pave-over 50' lead-in

  • Ideal for use on with gravel driveways or surfaces that are to be asphalted
  • Features a twisted lead-in to reduce the chances of interference and false detections.
  • Direct burial loops should be buried approximately 6" deep
Installation InstructionsInstructions d'installationSpec SheetBrochureLoop Placement GuideGuide de positionnement des boucles
1104-16FT-CHARC

Residential Side & Top PVC Weather-Strip with cap 16' Long - Charcoal (H)

  • Charcoal rigid vinyl retainer with charcoal flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.