Devanco Canada - Get The Right Garage Door Opener‎ and Parts

.243_2-5/8"-RH

Torsion Spring .243 x 2-5/8" x 12ft RH White/Yellow

Wire size: .243
Inside diameter: 2-5/8"
Length: 12 ft

.295_1-3/4"-RH

Torsion Spring .295 x 1-3/4" x 12ft RH Blue

Wire size: .295
Inside diameter: 1-3/4"
Length: 12 ft

.273_1-3/4"-RH

Torsion Spring .273 x 1-3/4" x 12ft RH Orange/Red

Wire size: .273
Inside diameter: 1-3/4"
Length: 12 ft

19-41ML

Master Link #41

For #41 chain
ANSI Standard Carbon Steel

17300

Doorlec DC-3000T3 3-btn Transmitter 313 MHz

One block of 10 dip-switches for programming
Will activate 3 Doorlec 17307 receivers (DC-3000R)
Includes visor clip and 9V battery

Programming Instructions

11801

Doorlec Oilite Cam

Fits 5/8" shaft fine thread.
Grooved 5/8" - 24 x 3/8"
Requires 2 per cam shaft

MJ00002

Micanan Brake Shoe - Right **No Longer Available**

Only available in complete kit # MJ00013 or MJ00014 for PRO-GH

CP-SW-AT

Lynx Single Limit Switch

T3B-DS

Lynx 3-btn Transmitter Dip Switch 303 MHz

Ultra secure mid-size transmitter with 8 dip-switches for coding
3-buttons provides control for 3 Lynx operators
Compatible with HomeLink in-vehicle remote control
Can be mounted on visor with saddle clip or carried on a keychain
Visor clip and 12V battery included
Will work with Lynx residential operators built from 2000 and up.

.......more details

Compatibility chart

VBELT_5L350

Manaras VBelt 5L 35" - repl. by B32

Used on MTH MTBH MSL models
Type B
Inside length 32 inches

BRAKEPART018

Manaras Brake Shoe Assembly Kit

Kit includes SHOE001 & SHOE002 for old brake system.
Fits all Manaras operators except gear head made prior to 1999.

Drawing

298601

Linear Wireless Multi-Code Keypad 310 MHz

Compatible with 310 MHz Stanley and Multi-Code receivers
4-digit access code
Backlit keys
Easy access to battery
Power: 9-volt battery
Codes: 1024 (set by dip switches)

.......more details

Installation Manual

1920

Whiting Top Closure Mounting Plate for Insulated Doors

DRQP

Linear 1-Channel Delta3 Gate Receiver 310 MHz ** Available to extent of inventory

1-Channel Gate Receiver
High-sensitivity short-range radio receiver
Operates in conjunction with the 9-inch local antenna (supplied).
Designed for use with automatic gate operators or systems where a remote antenna is needed.
Same as: DNR00013P

Installation Manual

8833T-OCS

Allstar 3-btn 1-Door O/C/S Transmitter 109372 318 MHz *** To Extent of Inventory

Open/Close/Stop remote for 1 door
Compatible with 3-channel Allstar and MVP receivers
Portable transmitter
Easy access to battery and coding switch
Power: 9-volt battery
Codes: 6561 (set by eight trinary dip switches)

.......more details

Programming Instructions

733T

Allstar 3-btn 3-Door O/C/S Transmitter 107477 318 MHz *** Replaced by P-733T

Open/Close/Stop remote for 3 doors
Compatible with 3-channel Allstar and MVP receivers
Stationary mounting
Easy access to battery and coding switch
Power: 9-volt battery
Codes: 6561 (set by eight trinary dip switches)

.......more details

Programming Instructions

220499

Linear Drive Sprocket - Belt (HBT)

HAE00048

Linear Helical Gear with Grease

Includes roll pins
Can be used on all Linear / Westinghouse residential operators.
Helical gear measures 2-7/8" diameter

HAE00040

Linear Control Logic/Receiver Board

Replaces HAE00039
Control board for LSO LDO LCO models

RV-300

3" Vinyl Insert for Brush Retainer per foot

Color: Black

600BL

6" Light Brush Insert 6ft Long

Polypropylene bristles

4005-16FT

Aluminum Retainer only for Heavy Brush 16' Long 180 degree

For angle application (180 degree)
For use with Heavy Brush

4007-8FT

Aluminum Retainer only for Light Brush 90 degree

For angle application
For use with Light Brush or Vinyl Insert.

4003-12FT

Aluminum Retainer only for Light Brush 12' Long 90 and 180 degree

For angle application (90 degree & 180 degree).
For use with Light Brush or Vinyl Insert.

4006-6FT

Aluminum Retainer only for Light Brush 6' Long 45 degree

For angle application (45 degree)
For use with Light Brush or Vinyl Insert.

4001-6FT

Aluminum Retainer only for Light Brush 6' Long 45 degree

For angle application (45 degree)
For use with Light Brush or Vinyl Insert.

4001-12FT

Aluminum Retainer only for Light Brush 12' Long 45 degree

For angle application (45 degree)
For use with Light Brush or Vinyl Insert.

1009-1-3/8"

Bottom Nail-On for Wood Door Heavy Duty per foot

For 1-3/8" commercial doors.
For heavier applications than the 1009-1-3/4".
Provides a better cushion.
Color: Black

1019-1-3/8-10'

Rigid Vinyl Bottom Retainer Flat 10' Long

Black - for door thickness of 1-3/8"

1006-2-12'

Rigid Vinyl Bottom Retainer U-Shaped 12' Long

Black with flexible fin to touch door face.
For door thickness 2"

1006-1-1/2-14'

Rigid Vinyl Bottom Retainer U-Shaped 14' Long

Black with flexible fin to touch door face.
For door thickness 1-1/2"

1003-2-10'

Aluminum Bottom Retainer L-Shaped 10' Long

For 2" thick doors.

1003-1-3/8-24'

Aluminum Bottom Retainer L-Shaped

For 1-3/8" thick doors.
DIE # ES18009

1104-18FT-DK-BN

Residential Side & Top PVC Weather-Strip with cap 18' Long - Commercial Brown (DN)

Commercial brown rigid vinyl retainer with commercial brown flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.
Full case quantity only (12).

1104-7FT-DK-BRN

Residential Side & Top PVC Weather-Strip with cap 7' Long - Commercial Brown (DN)

Commercial brown rigid vinyl retainer with commercial brown flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

1104-10FT-BROWN

Residential Side & Top PVC Weather-Strip with cap 10' Long - Brown (N)

Brown rigid vinyl retainer with brown flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

BLOCK-RED

Spring Repair Blocks .3750-.4305 Pair

For the temporary repair of a broken spring.
Wire size: .3750 - .4305

24-RWB-PAIR

Winding Bars Round 24" Set of 2

Cold rolled hardened steel.
Machined to 1/2" at one end with 5/8" outside dia. on the other.
Sold as a pair.

1104-16FT-CREAM

Residential Side & Top PVC Weather-Strip with cap 16' Long - Cream (C)

Cream rigid vinyl retainer with cream flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.
Also known as Almond

1104-12FT-SAND

Residential Side & Top PVC Weather-Strip with cap 12' Long - Sandstone (D)

Sandstone rigid vinyl retainer with sandstone flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.
Also known as Taupe

1106-14-BLACK

Commercial Side & Top Weather-Strip 14' Long - Black

Aluminum retainer with black dual fin vinyl

1102-10-BLACK

Commercial Side & Top Weather-Strip 10' Long - Black

Aluminum retainer with black heavy-duty dual fin vinyl.

1102-12-BLACK

Commercial Side & Top Weather-Strip 12' Long - Black

Aluminum retainer with black heavy-duty dual fin vinyl.

1001-8-BLACK

Commercial Side & Top Weather-Strip 8' Long - Black

Aluminum retainer with black dual-fin vinyl

32-48-170

Extension Spring 8' Door - 170 lbs Orange ** Replaced by 27-48-170

Double - Loop
32" long 48" stretch 170 lb load
Springs sold individually
Rated for 10000 cycles

Spec Sheet

32-48-80

Extension Spring 8' Door - 80 lbs Gold ** check for availability

Double - Loop
32" long 48" stretch 80 lb load
Springs sold individually

32-48-70

Extension Spring 8' Door - 70 lbs Orange ** check for availability

Double - Loop
32" long 48" stretch 70 lb load
Springs sold individually

32-48-60

Extension Spring 8' Door - 60 lbs Brown ** check for availability

Double - Loop
32" long 48" stretch 60 lb load
Springs sold individually

25-42-270

Extension Spring 7' Door - 270 lbs Orange ** check for availability

Double - Loop
25" long 42" stretch 270 lb load
Sold individually

Spec Sheet

25-42-170

Extension Spring 7' Door - 170 lbs Orange

Double - Loop
25" long 42" stretch 170 lb load
Sold individually
Rated for 10000 cycles

Spec Sheet

25-42-180

Extension Spring 7' Door - 180 lbs Gold

Double - Loop
25" long 42" stretch 180 lb load
Sold individually
Rated for 10000 cycles
Same as part number 118

Spec Sheet

25-42-70

Extension Spring 7' Door - 70 lbs Orange

Double - Loop
25" long 42" stretch 70 lb load
Sold individually
Rated for 10000 cycles

Spec Sheet

94-00002

Truck Door Clevis Pin 1/4" x 7/8"

Zinc Plated finish
1/4" x 7/8"

28-02201

Truck Door 2" Vertical Track & Right Angle Assembly 106.5" Curbside (RH) for Whiting Roll-Up Doors

SPECS: Length: 106.5" Fits door sizes: 91" - 100" high
Assembly includes: Right angle mounting track Vertical track and Torsion bracket
Cross Reference: W #2275-1
Galvanized steel 14 gauge construction
Tongue and groove for proper alignment at joints

28-02114

Truck Door 2" Vertical Track and Right Angle Assembly 120" Roadside (LH) for Whiting Roll-Up doors

SPECS: Length: 120" Fits door sizes: 101" - 114" high
Assembly includes: Right angle mounting track Vertical track and Torsion bracket
Cross Reference: W #2275-2
Galvanized steel 14 gauge construction
Tongue and groove for proper alignment at joints

27-20307

Truck Door Balancer Bracket End - Roadside for Whiting Roll-Up Doors

Steel construction
Plain finish
Cross Reference: W # 2524 for # 2376 balancer

27-20305

Truck Door Balancer Bracket Center for Whiting Roll-Up Doors

Steel construction
Plain finish
Cross Reference: W #2525

27-20200

Truck Door Winding Plug for Todco Roll-Up Doors

Cast aluminum construction.
Provides easy method to adjusting spring tension.
Cross Reference: T #59158 T #51041 W #4050 340100

26-40200

Truck Door Head Seal Only 96" Long for Roll-Up Doors

Seal molded from long lasting rubber
Cross Reference: T #69718 630300

26-40037

Truck Door Offset U-Channel Seal Retainer 96" Long for Whiting DryFreight Doors *** To extent of inventory

Aluminum extrusion construction.
Retainer is offset to allow header clearence with seal when door is in open position.
For use with offset bottom seal #26-40040
Cross Reference: W #8280

26-14321

Truck Door Bottom Panel with Seal (11" x 98") for Todco Dryfreight Doors

These panels are cut to an extra wide width to fit wider vehicle applications
Interlocking tongue and groove design for weather-tight joint and proper panel alignment
3/4" thick 7 ply exterior grade medium density plywood Primer finish
Comes only with bottom retainer and seal (installed)

R5999

Shaft Collar 1" with 1 Set Screw

Set Screw: 5/16 x 18

Z9004

Shaft Key Bent 3" x 1/4"

3" Bent Key
Zinc Plated Steel

DM28VL-125

Cable Drum Vertical Lift 28' 1350-28 (1-1/4") Pair

28' Vertical Lift aluminum die cast alloy for 1-1/4" shaft.
3/8"-16 x2" hardened cup point set screws installed with red heads. -
Color coded: Red=LH and Black=RH. Pair includes (1) LH and (1) RH.
Max. Door Height: 28'-1".
Rated Lift per Drum: 1100 lbs.
Max. Cable Diameter: 1/4".

.......more details

SF200

Spring Fitting 2" Pair

Unviversal thread for use in either LH or RH wound springs.
Pair includes: (1) winding and (1) stationary.
Maximum wire size diameter: .3065".
Set screw installed: 3/8"-16 x 1" (2).
Mounting: 1" tube or solid shaft
Winding bar hole 1/2"

.......more details

CBB125

Stop & Sleeve 1/4" 100 pair

Includes 100 stops and 100 oval sleeves

SF175

Spring Fitting 1-3/4" Pair

Universal thread for use in either LH or RH wound springs.
A pair includes: (1) winding and (1) stationary.
Maximum wire size diameter: .2950".
Set screw installed: 3/8"-16 x 1" (2)
Fits 1" shaft
Winding bar hole 1/2"

.......more details

H11G04

Hinge #4 x 11 gauge

11 gauge # 4 hinge - 0.72 lbs
Bright zinc-plated steel construction
For use with 7/16" stem rollers

CB5320500

Cable 5/32" 7x19 500' Galvanized

Galvanized cable 5/32" 7x19 500ft spool.
Cable break strength: 2800 lbs

Comparison charts

RS1024

Roller 2" Steel 4" stem 10 ball

Steel Roller Wheel Diameter: 2"
Working Length: 3.5" Overall Length: 4.5"
Box qty: 150 Box weight: 53.3 lbs (2-4-10 steel)

846CABLECL

Cable Clip - 14GA

Cable Adjustment Clip
3 hole pattern
Used to attach a cable to the S-hook on an extension spring system
Same as part number 423

HD3080

Step Lift Plate Curled

Step Plate/Lift Handle

HD3130

End Stile Latch 7-1/2" Lockbar Length

Lockbar Length: 7-1/2"
Throw: 2-1/8" Use with: Lockbar or End Stile
Centerline Distance (key spindle to handle shaft): 2-3/4".
Handle in Bright Chrome Finish Latch in Bright Zinc Plated steel.

BK312

Jamb bracket J-12 #12 12 gauge

Sold by the piece
Height 5.0" Length 1.9" Width 2.45"
Bright zinc plated 12 gauge steel
2" long track mounting slot accepts 5/16" track bolts

4X10SC50

Devanco Loop 4' x 10' saw-cut 50' lead-in

Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
Ideal for use on existing asphalt or concrete surfaces
Features a non spliced continuous wire throughout loop turns and lead-in.
requires the use of loop sealer when being installed to ensure long lasting trouble-free detection

Installation Instructions Instructions d'installation Loop Placement Guide Guide de positionnement des boucles

4X6SC50

Devanco Loop 4' x 6' saw-cut 50' lead-in

Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
Ideal for use on existing asphalt or concrete surfaces
Features a non spliced continuous wire throughout loop turns and lead-in.
requires the use of loop sealer when being installed to ensure long lasting trouble-free detection

Installation Instructions Instructions d'installation Loop Placement Guide Guide de positionnement des boucles

4X33PO50

Devanco Loop 4' x 33' pave-over 50' lead-in

Ideal for use on with gravel driveways or surfaces that are to be asphalted
Features a twisted lead-in to reduce the chances of interference and false detections.
Direct burial loops should be buried approximately 6" deep

Installation Instructions Instructions d'installation Spec Sheet Brochure Loop Placement Guide Guide de positionnement des boucles

971LMC

LiftMaster 1-btn Security+ Transmitter 390MHz

390 MHz Security+ single button visor remote
Compatible with Security+ systems with Amber learn button including Chamberlain Sears Craftsman and Raynor code rolling residential openers (Safety Signal) manufactured 1997-2005
Visor clip and Lithium battery included (part #CR2032)
Same as 971LM 91LM 950CB 950CD

Programming Instructions

365LMC

LiftMaster Universal Plug-in Receiver 315 MHz

Compatible with any garage door opener with a simple 2-wire dry contact
Includes 2-conductor bell wire
Able to accept 8 Security+ transmitters & 1 digital keypad
Compatible remotes; 893MAX 890MAX 892LT 373LM 371LM 374UT 375UT

Programming Instructions Instructions de programmation

MOTOR280

Manaras Electric Motor TEFC 3/4 HP 600V 3PH for N4/12 Applications

Electric motor only- not wired
Continuous duty base mount 56Z

TRACK-3"-RAW-14

Raw Vertical Track 3" 14'-0" Sold per Piece

MF00007

Micanan Hex Head Bolt 1/4" - 20UNC 3/4" Full Thread

Used on PRO-GHC
4 required per operator

.295-6-L-C

Cut-to-Length Torsion Spring .295 x 6" Left Hand Wound Coated ** Price by Quote Only

Priced per inch
For factory installed cones priced seperately - use part no. C-600-INSTALLED

LC2D129B7

Contactor Telemecanique 24V ** Discontinued

MK-00063

Micanan Honeywell Limit Switch

STRUT-2-1/4-16'-NH

Door Strut 2-1/4" Non Hemmed 16ft Long

Reinforcement bar 2-1/4"

MCB-421-CONT

Lynx Heavy-Duty Chain Drive Trolley 3/4 HP 220V 1P Contactor Model

Heavy-Duty spur gear chain drive trolley

BK309

Jamb bracket J-09 #9 12 gauge

Sold by the piece
Height 4.25" Length 1.9" Width 2.45"
Bright zinc plated 12 gauge steel
2" long track mounting slot
manufactured to accept ¼” fasteners when attaching to the track and 5/16” to lag to the wall.

CBC18

Thimble 1/8" - 100 per pkg

41A4208-2

LiftMaster Chain Spreader Kit

Chain Spreader Replacement Kit.
For use with various LiftMaster® and Chamberlain® Chain drive garage door opener models.
Complete kit includes: Chain spreader replacement screws and washers.
Also known as: 41A4208 41A4208-2 062210

CORNELL-SLAT

Made to Order Pricing by Quote Only

BK600/PR-USA

End Bearing Plate Flanged 8-GA 6" with Bearing. Commercial Sold as a pair

For commercial applications Used on wood jambs
Includes (1) RH and (1) LH plate with bearing C16-32F
EBF6" offset USA Style
1" ID

.343_6"-LH

Torsion Spring .343 x 6" x 12ft LH Blue/Red

Wire size: .343
Inside diameter: 6"
Length: 12 ft

.312-514-R-C

Cut-to-Length Torsion Spring .312 x 5-1/4" Right Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-514-INSTALLED

K41-0380-000

LiftMaster Bridge Rectifier 700/1200

For Maxum ops

MQ00012

Micanan Adjustable Cable Stopper Gold C/W Set Screw Sold per piece

Used on all Micanan waterproof and corrosion proof units that have brakes as well as all explosion proof units.
Comes with set screw 3/16” x ¼”

OCDFX3

Overhead Door 3-Btn Transmitter 315/390 Mhz

Dual Frequency transmitter that will work on all OHD/Genie brand 315 or 390 rolling code commercial openers including the the RX OHD commercial opener.
Part Number: OCDFX3.S GIDFX3.S