Devanco Canada - Get The Right Garage Door Opener‎ and Parts

PRO-HBH-7523U-L

Micanan 3/4HP 230V 3P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Left Hand (Pro-HHD)

3/4 HP230V 3PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
N-1 Through-beam (MK-00649) photocells included. Other options available.
3-btn O/S/C (02-103) wall control station included
Adjustable Friction Clutch 5L320 drive belt
#50 Roller chain 18 tooth door sprocket included
Emergency chain hoist with electrical cut-off for manual operation
Enough Hoist hand chain included for 16’ high standard sectional door
Sealed ball bearings on the output and intermediate shafts roller bearings on clutch shaft
Solenoid Actuated Brake drum brake for quiet reliable braking
Door speed approx. 8-9”/second but can be adjusted by changing the included 18 tooth sprocket
2 Year warranty
Shipping weight 110lbs

41A4813

LiftMaster Chain Pulley Bracket Kit

Fits chain drive models

41A7920-1

LiftMaster Hardware Kit

MOTOR403

Manaras Electric Motor 1/2HP 120V 1PH

Instant reverse
Medium-duty 1500 rpm
For OMJ/OMH

8086.225.310

Whiting .225 x 2-5/8 IN x 31" Roadside with Cones

An original Whiting assembly

20456R

Genie Pulley Support Kit *** No Longer Available

Front metal clip with pulley
Front idler for use with Genie and Overhead Door T-rail systems

RA-AD-WKP-05

Lynx 5-btn Wireless Keypad AD455 372 MHz

Programming Instructions Compatibility chart

MOUNTSHAFT010

Manaras Hoist Shaft Kit for MJH (pre-1998)

Drawing

OSH-6112-CONT-R

Manaras Opera-SH 1/2HP 120V 1Ph Contactor Right Hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"

Installation Manual Sell Sheet

EQ2722

SkyLink 3/4 HP Garage Door Opener with 2 2-Btn Keychain Remotes ** Discontinued

The DC motor offers additional benefits with very quiet operation and much less vibration.
It is ideal for garage doors that are below a living room or bedroom.
The DC motor also offers the soft start soft stop features which reduces the vibration and wear and tear of all the mechanical parts
Features: Rolling Code Technology Soft Start Soft Stop Optimal Force Learnings and Safety Beam Sensors.
Available in either Belt or Chain drive
Includes two 2-btn keychain remotes # MK318-2

.......more details

Installation Manual Sell Sheet

.250-258-L

Cut-to-Length Torsion Spring .250 x 2-5/8" Left Hand Wound Green

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

CP-PU-DRV-HDC

Lynx Drive Pulley 7/8" x 8" 5L HDC

7/8" shaft
8" diameter

26CW94522

Truck Door Intermediate Panel (12" x 98") Painted White for Whiting Dryfreight

These panels are cut to an extra wide width to fit wider vehicle applications.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
3/4" thick 7 ply exterior grade medium density plywood.
Painted white

TC134-8

Top Cap 1-3/4" 8 ft Black Box Qty Only ** To extent of Inventory

Sold in box quantities only
12 pieces per box

.295-334-L

Cut-to-Length Torsion Spring .295 x 3-3/4" Left Hand Wound Blue

Priced per inch
For factory installed cones priced seperately - use part no. C-375-INSTALLED

1104-ASFT-16FT

Elton Aluminum Stiffener for 1104 16ft

Prevents the 1104 from buckling in the hot sun

5001-7-CHARCOAL

Residential Side & Top Weather-Strip 7' Long - Charcoal

Painted aluminum retainer with flexible dual fin vinyl.
Residential use.
Sold by full case quantity (20)

GUIDE014

Manaras Chain Guide

26-40039

Truck Door Offset U-Channel Seal Retainer 98" Long for Whiting DryFreight Doors *** Obsolete

Aluminum extrusion construction.
Retainer is offset to allow header clearence with seal when door is in open position.
For use with offset bottom seal #26-40045

CONTACTOR043

Manaras Reversing Contactor Allen Bradley 16A-24VAC

AB #100-C16*10

VBELT_4L370

Manaras VBelt 4L 37"

Used on MJH models from 1980 - 2000

412001

Linear 2-Channel Multi-Code Visor Transmitter 300 MHz

Compatible with 300 MHz Multi-Code receivers
Supplied with visor clip
Easy access to battery and coding switches
Power: 9-volt battery
Codes: 1024 (set by dip switches)
RF frequency: 300 MHz

.......more details

Installation Manual

50800P

LiftMaster Treadle Protection Plate **discontinued

97-75000

DOT-C2 Reflective Tape 24" x 2" W 6" Red x 6" White Pattern

DOT-C2 certified exceeds NHTSA requirements
Highly reflective even up to a 90 degree angle
Quick and easy to apply

GH4416-03-L

Green Hinge #3 12-ga Left Hand *** No longer available

A unique spring-loaded hinge that allows automatic adjustment of the door.
Provides a close tight seal of the door to the building
Green powder coat finish
For doors up to 20ft

COUPLING002

Manaras Disconnect Coupling for MJH ** NLA Sold in Kit only** Use MOUNTSHAFT010 or 010A **

If MJH is manufactured prior to 1998 4 x PIN016 are required
If MJH is manufactured after 1998 2 x PIN016 are required
PIN016 sold separately

LC-36A

LiftMaster Light Curtain **discontinued

Must be used with a primary entrapment device and be installed along the vertical plane of the door.
Color-coded transmitter and receiver for easy identification.
Provides 36 in. of effective height coverage to increase the area of protection.
Multiple sets of LC-36A curtains can be mounted on a door providing coverage flexibility.
Maximum door width of 33 ft. ensures coverage for most commercial doors.
Eight (8) LEDs per side and 22 cross-beams produce an invisible curtain of infrared light for maximum detection capability.

.......more details

Installation Manual Manuel d'Installation Sell Sheet Connecting the lc-36A to a Non-LiftMaster Opener

K75-51048

LiftMaster Cover with Crank Housing for SL3000 **DISCONTINUED

HD polyethylene cover

27-48-260

Extension Spring 8' Door - 260 lbs Brown

Single - Loop
27" long 48" stretch 260 lb load
Sold individually
Rated for 10000 cycles

Spec Sheet

27-48-140

Extension Spring 8' Door - 140 lbs Blue

Single - Loop
27" long 48" stretch 140 lb load
Sold individually
Rated for 10000 cycles

Spec Sheet

H12G02-SS

Hinge #2 x 12 gauge Stainless Steel

Manufactured with 12ga. Rust-Resistant Stainless Steel
Universal Design
Fits Most Overhead Sectional Doors
Priced Per Each

H12G01-SS

Hinge #1 x 12 gauge Stainless Steel ***NLA

Manufactured with 12ga. Rust-Resistant Stainless Steel
Universal Design
Fits Most Overhead Sectional Doors
Priced Per Each

K94-36408-1

LiftMaster Reset Switch LA500 with ID Resistor

For use with LiftMaster LA500 Series swing gate operators
Includes ID resistor kit
Includes LA500 product ID

K77-36541

LiftMaster Antenna

For various gate operators

MP00021

Micanan Up-Charge Track and #410 (#48) chain for 24' h Door *Actual length 318"*

For 1/3 HP and 1/2 HP operators only

PRO-HB5011R-RH

Micanan 1/2HP 115V 1P Hoist Operator with Brake and Mechanical Contactor Right Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Includes solenoid brake

Installation manual Specification sheet

39-10167

LiftMaster Clutch Disc for MH

B119

Rolling Steel Fire Door Bottom Bar Slotted Angles Sold per Foot

7550

Whiting Winding Cone for 2-5/8" ID Spring Wire Roadside (LH)

A Whiting original

SLT14-18

Rolling Steel 3" Flat Slat 18-ga Galvanized

340.115-CUT

Whiting Top Panel Tongue & Groove 11-1/2" h Cut to Exact Length

Primer only
Customer to specify exact length

.331-5-1/4-RH-C

Torsion Spring .331 x 5-1/4" x 144" RH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .331 ID: 5-1/4" Length: 12 ft

.319-6-RH-C

Torsion Spring .319 x 6" x 144" RH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .319 ID: 6" Length: 12 ft

.312-6-LH-C

Torsion Spring .312 x 6" x 144" LH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .312 ID: 6" Length: 12 ft

.312-5-1/4-RH-C

Torsion Spring .312 x 5-1/4" x 144" RH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .312 ID: 5-1/4" Length: 12 ft

.306-6-LH-C

Torsion Spring .306 x 6" x 144" LH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .306 ID: 6" Length: 12 ft

.234-2-RH-C

Torsion Spring .234 x 2" x 144" RH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .234 ID: 2" Length: 12 ft

.234-2-LH-C

Torsion Spring .234 x 2" x 144" LH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .234 ID: 2" Length: 12 ft

.225-2-5/8-RH-C

Torsion Spring .225 x 2-5/8" x 144" RH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .225 ID: 2-5/8" Length: 12 ft

70.32

Whiting Stainless Steel U-Bolt 1-1/4"

Sold per U-bolt

9723S19

Whiting Pull Strap 19" with Stainless Steel Buckle

MK00650

Micanan UPCHARGE for N-4 Photocells in Lieu of Nema-1 Reduction for N1 Included. **Obsolete Repl by MK00697

In lieu on the standard Nema-1 photocells supplied with the operator

Installation Manual

.306-334-L

Cut-to-Length Torsion Spring .306 x 3-3/4" Left Hand Wound Red

Priced per inch - cones sold seperately
For factory installed cones use part no. C-375-INSTALLED

SOLID_SHAFT_17'

Solid Shaft 1" Keyed 17 ft Galvanized

Actual length is approx. 17'-1"

SOLID_SHAFT_15'

Solid Shaft 1" Keyed 15 ft Galvanized

Actual length is approx. 15'-1"

19-5816-NP

LiftMaster Trolley Chain Pack #48 for 16ft Door Nickel Plated

Chain pack only

MGR20-Y-2U-05

Miller Edge Sensing Edge Round Yellow 2-Wire Universal Outlet 5ft Long

��Electromechanical edge for standard 2" round or square frame sliding sing and bi-part gates. •3-sided activation allows for immediate stopping or reversing of motion •Contours to round or square posts. •Temperature range: -30F to 155F •Lead wire: 18 gauge 2ft length •Sensitivity: nominal 6-8 PSI •2 wrie NO configuration •ANSI/UL325 recognized component •Cannot be bent •One year warranty

Installation Manual Sell Sheet

CHAIN058

Manaras #410 chain 48 Pitch (24" long)

OGH-6214-ECB

Manaras 1 HP 240V 1Ph Gear Head Operator with Elect. Circuit Board

A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
Includes a self-engaging chain hoist for manual operation
25 cycles per hour 80 cycles a day
Hoist on right side standard can easily be moved to the left in field
Full overload protection
BRACKET112 must be used for wall mounting

.......more details

Installation Manual Sell Sheet

OTBH-6534-1-ECB

Manaras Trolley Operator 1 HP 600V 3 Ph with Electronic Circuit Board

Heavy-duty low headroom trolley operator designed for use on industrial standard lift sectional door
25 cycles per hour 80 cycles per day
It incorporates a drum-band type solenoid brake.
Tracks are an extra 36 lbs per track
3/4 HP & 1 HP operators come with #41 full roller chain

Installation Manual Sell Sheet

OTBH-6232-ECB

Manaras Trolley Operator 1/2 HP 208V 3 Ph with Electronic Circuit Board

The OTBH is a heavy-duty low headroom trolley operator
Designed for use on industrial standard lift sectional doors
It incorporates a drum-band type solenoid brake
25 cycles per hour 80 cycles per day
1/2 HP operators come with # 48 (410) roller chain

Installation Manual Sell Sheet

OHJ-6113-ECB

Manaras Heavy-Duty Jackshaft Operator 3/4 HP 120V 1 Ph with Elect. Circuit Board

25 cycles per hour 100 cycles per day
An Industrial duty operator featuring both the patented Hoist-a-Matic a self-engaging chain hoist for manual operation as well as a floor level disconnect
Specifically designed to motorize grills when a manual egress is required
Mechanical brake
Hoist on right standard
Full overload protection

.......more details

Installation Manual Sell Sheet

OPJ-6213-ECB

Manaras Heavy-Duty Jackshaft Operator 3/4 HP 240V 1 Ph with Elect Circuit Board

An industrial operator designed for use on standard high and vertical lift sectional doors
Can also be used on rolling doors and grills
It incorporates a floor level disconnect mechanism for manual operation
25 cycles per hour 100 cycles per day
Continuous-duty single phase capacitor start or 3 phase motor open drip proof
Mechanical brake

.......more details

Installation Manual Sell Sheet

17-10165

LiftMaster Pulley 7"

LEVER007

Manaras Disconnect Lever for old MJH

Works on model MJH - old units

OPJ-6532-ECB

Manaras Heavy-Duty Jackshaft Operator 1/2 HP 600V 3 Ph with Elect Circuit Board

An industrial operator designed for use on standard high and vertical lift sectional doors
Can also be used on rolling doors and grills
It incorporates a floor level disconnect mechanism for manual operation
25 cycles per hour 100 cycles per day
Continuous-duty single phase capacitor start or 3 phase motor open drip proof
Mechanical brake

.......more details

Installation Manual Sell Sheet

1005-1-3/4-8'

Aluminum Bottom Retainer U-Shaped

For door thickness 1-3/4"

37845R

Genie Screw Drive Carriage Assembly

Compatible with the following models: GPower 900 TriloG 1200 TriloG 1500 PowerMax 1200 PowerMax 1500
Works with Screw Drive Shuttle assembly part # 36664R - sold seperately

9150000628

5/32" Stops ONLY 100/pkg

Stops only - 100 per pack

34538S.S

Genie Magnetic Close Down Limit Switch Assembly 138"

For Chain Glide models

MX00140-110V

Micanan Brake Assembly for PRO-TB/APTB with 110V Solenoid Outside - New Model ** DISCONTINUED

G65-19084

LiftMaster Thermostat Control Heater Fin Type for 208V-460V Gate Operators ** Discontinued

Heater used in BG type gate operators

Installation Manual

796

Fasteners Keps Nut 1/4-20 1000/Box

Lockwasher & nut combination

MV-00025-OLD

Micanan 32-Door O/C/S Transmitter CT-32 313 MHz OLD STYLE Deep Buttons *** NLA repl by new style

Commercial / Industrial transmitter

19-5810

LiftMaster Trolley Chain Pack #48 for 10ft Door

Chain pack only

CH755L5-LH

LiftMaster Hoist Op. with Carwash Mod. 3/4 HP 575 VAC 3 Ph Logic 5 Left Hand ***Replaced by CRBH755L5-RH

Industrial Duty Hoist Operator with Damp Environment modification.
Comes with CPS-UN4 photoeyes

Installation Manual Manuel d'Installation Sell sheet Brochure

CH505L5-RH

LiftMaster Hoist Op. with Carwash Mod. 1/2 HP 575 VAC 3 Ph Logic 5 Right Hand

Industrial Duty Hoist Operator with Damp Environment modification.
Comes with CPS-UN4 photoeyes

Installation Manual Manuel d'Installation Sell sheet Brochure

H751L5-RH

LiftMaster Ind. Duty Hoist Op. 3/4 HP 115/230 VAC Logic 5 Right Hand ***Replaced by the RBH751-RH

Includes CPS-U
H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door. Connectivity
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.

.......more details

Installation Manual Manuel d'Installation Sell sheet Brochure

H501L5-RH

LiftMaster Ind. Duty Hoist Op. 1/2 HP 115/230 VAC Logic 5 Right Hand *** No Longer Available

Includes CPS-U
H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door.
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.

.......more details

Installation Manual Manuel d'Installation Sell sheet Brochure

11-19471

LiftMaster Clutch Shaft

Fits model H operator with Logic 5

23-34815

LiftMaster Stop / Reset Switch

Rocker switch 1A 12VDC

CPT4

LiftMaster Passport 4-Btn Remote Control ** Discontinued

The CPT-4 remote operates up to four different Security+ devices.
Three of the four buttons can operate with a telephone entry or access control system .
Great for gated drives or commercial uses.
Passport Technology use with CPWR Wiegard Receiver.
Also compatible with Homelink systems

Programming Instructions

ME123-BLK-END

Miller Edge Black End Outlet 2 -Wire 2" wide x 1-1/2" high Sold by the Foot

Electromechanical slide in edge for sectional doors and sliding gates.
Touch sensitive singaling allows for immediate stopping and reversing of motion
Temperature range: -30F to 155F
Lead wire: 22 gauge universal
Sensitivity: nominal 6-8 PSI
2 wire NO configuration

.......more details

Installation Manual Worksheet Sell Sheet

1104-14FT-CHARC

Residential Side & Top PVC Weather-Strip with cap 14' Long - Charcoal (H)

Charcoal rigid vinyl retainer with charcoal flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

27-20113

Truck Door W-Style Spring Assembly Roadside 33" Long

Wire thickness: .182
Spring length: 33 inches long (assembled length)
Inside diameter: 1.188
Includes cable drum and bearing assembly winding cone wound onto spring for stronger desgn and internal spring spacer.