Devanco Canada - Get The Right Garage Door Opener‎ and Parts

LB412-14

Laminated Bumper Standard Black 12" x 14" 4" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 1” diameter.
12" x 14"

PRO-GHC-30053

Micanan 3 HP 575V 3P Gearhead Operator No Controls

Specification sheet

HINGE-211-PCG

Powdercoated Hinge #2 x 11 gauge Grey ** To Extent of Inventory

Heavy Duty 11 gauge offset hinge #2 - 0.71 lbs
Powdercoated Grey
For use with 7/16" stem rollers

MOD027B

Manaras Auxiliary Output Module Modification

2950-0003

3/64" Sleeve ONLY 100/pkg

Aluminum sleeves only 100 per pack
Stops are not available in this size

.363-334-L

Cut-to-Length Torsion Spring .362 x 3-3/4" Left Hand Wound Green/White

Priced per inch - cones sold separately
For factory installed cones use part no. C-375-INSTALLED

VWS-34-MED-OAK

Screw Colored for Vinyl Weatherstrip #8 x 3/4" 1000/Box Medium Oak

Pan head

VWS-34-BRONZE

Screw Colored for Vinyl Weatherstrip #8 x 3/4" 1000/Box Bronze

Pan head
S point

VWS-34-GOLD-OAK

Screw Colored for Vinyl Weatherstrip #8 x 3/4" 1000/Box Gold Oak *** NLA - USE MEDIUM OAK

Pan head

VWS-34-SANDSTONE

Screw Colored for Vinyl Weatherstrip #8 x 3/4" 1000/Box Sandstone

Pan head
S point

41C5497

LiftMaster Wiring Harness Kit High Voltage

For use with various LiftMaster® and Chamberlain® AC Chain Drive Garage Door Openers; manufactured after 2001

9004-10

Excalibur Threshold Kit 10'2" x 4" W Solid Aluminum *** Price by Quote Only

Stands 1/2" tall
Built with 6061-T6 solid aluminum to withstand extreme weight and excessive traffic conditions.
Two-way fastening/seal system won’t shift buckle or leak
Top V-groove design provides for skid proof protection and improved tire traction on loading docks and incline ramps.
The 1/2" diameter wire access port makes it easy for sensor and security installations.
The kit comes complete with pre-drilled counter sink holes 3/8" anchors and sealant.

.......more details

1104-8FT-GREEN

Residential Side & Top PVC Weather-Strip with cap 8' Long - Green (R)

Green rigid vinyl retainer with green flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

26CW94323-CUT

Truck Door Bottom Panel with Seal (13" x Cut-To-Size Painted White for Whiting Dryfreight

These panels are cut to customer's specifications
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
These panels have no routs and shipped without holes.
3/4" thick 7 ply exterior grade medium density plywood.
Painted white
Comes only with bottom retainer and seal (installed)

.......more details

1005-1-3/8-14

Aluminum Bottom Retainer U-Shaped 14' Long

For door thickness 1-3/8"

2806.148.140

Whiting .148 x 2-3/16 x 14" Roadside with Cones

.207-3-7.5-RHW

Mini Storage Spring .207 x 3" x 7.5" long Right Hand

221816

Decorative Hinge Assembly Carriage Style 16" Malleable Iron Sold per piece (175260)

As seen on carriage house doors
Total length is 18" for hinge and strap assemby.
1/4" thick
Mounting hardward sold separately
Sold per piece

ME00002

Micanan Clutch (Input) Shaft Only for Pro-H/HB

3/4" x 16-3/8"

TRACK-GUARD-36

Track Guard 36" Tall Safety Yellow With Base Sold as a Pair *** To Extent of Inventory

Provides impact protection to vertical track
45° angle flange adds strength protects from side impact.
7-gauge steel construction powder coated safety yellow for high visibility.
1/4” foot plate drilled with slotted holes for three 1/2” anchors.
Wall flange drilled with slotted holes for four 3/8” anchors
Includes: 60-5092 (right) and 60-5093 (left) sides

.......more details

26CW94625-CUT

Truck Door Top Panel w/o Hardware (15" x Cut-To-Size Painted White for Whiting Dryfreight

These panels are cut to customer's specifications
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
These panels have no routs and shipped without holes.
3/4" thick 7 ply exterior grade medium density plywood.
Painted white

RW-TS-OPTION

Richards Wilcox Top Seal & Retainer Option Sold per Foot

Available option when purchasing doors

RW-DOOR

Richards Wilcox Door Special Order

Special order as per customer's requirements

MB-01010

Micanan Electric Motor Only Limited Duty 1/2HP 110V 1PH

Fits models: LT LJ LH LHA

K20-1075B2LPH24

LiftMaster Electric Motor 3/4 HP 115V/208V/230V 1Ph Logic 5

Standard base mount 3/4 hp motor for new L5 operators
Also known as: 20-1075B-2LP K20-1075B-2P-H24 K20-1075B-2LP

TRACK-3"-RAW-16

Raw Vertical Track 3" 184" 13g Sold as a PAIR

2376.177_27.850

Whiting Torsion assembly .177 wire size 27" spring length 85" shaft

9234001.003

Overhead Clutch Shaft Assembly with Double Pulley SFL

TRACK-2"-RAW-13

Raw Vertical Track 2" 13'-0" Sold per Piece

26253

Doorlec Shaft 9-3/4" x 5/8" Keyed LJ / LJH

9271431440

Spring Wire .289 x 2.625 x 144" Coated RAW LH

.289 x 2-5/8" x 12'

DT3+1

Linear 3+1 Channel Transmitter 310 MHz

Activates one GRD gate receiver and up to three separate Delta-3 receivers
Test/operate LED
Visor mounting clip supplied
Power: 9-volt battery
Codes: 256 independent codes for gate + 64 multi-channel codes for doors (set by dip switches)
Frequency: 310 MHz

.......more details

Programming Instructions

MM00013

Micanan Chain Guard (MM00431)

Fits PRO-H/HB
New part number # MM00431

510.2996.06

Whiting Steel Roller Upgrade Option for 6 Panel DF Door

Upgrade option only - must accompany a door order

K1A6426-2

LiftMaster Control Board for RSL12V / RSW12V ** USE K001A6426-2

PP12X34.5

Base Plate 12" x 34 1/2"

12"x34.5" Base Plate Stainless Steel

ME00035

Micanan Limit Shaft Light Duty 3/8-1/2 x 8-1/2"

39914650

Hitch Pin Forged Wire Handle 7/8" x 6-1/2" Red

Usable length is measured between the shoulder and the cotter pin

LB412-12

Laminated Bumper Standard Black 12" x 12" 4" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 1” diameter.

.......more details

SPR41B36X1.5

Sprocket 41B36 1.5" Bore 3/8"x3/16" keyway

.343-334-R

Cut-to-Length Torsion Spring .343 x 3-3/4" Right Hand Wound Blue/Red

Priced per inch - cones sold seperately
For factory installed cones use part no. C-375-INSTALLED

G-21X13-134-W

Thermal Window Clear 21" x 13" for 1-3/4" Garaga Door White

For 1-3/4" thick door

SNACPH39

LiftMaster HID 30-bit Proximity Card Facility Code 9 *Discontinued*

Same as SN000099-30-9
Compatible with KPR2000 reader
Replaced by LMPC2-SN (need to know facility code)

2806.156.195

Whiting .156 x 2-3/16 x 19.5" Roadside with Cones

23-20088

LiftMaster On/Off Switch 120V 15A

Also known as: SN5530039 MA019

K75-34828

LiftMaster Idler Shaft Kit

Complete with: Bearings Sprocket 50B12x1" and Idler Shaft.
For SL575 SL585 with GL Board

92803N6000

Truck Door .187 x 2.188 x 60 RHW

SLR-221

Linear Residential Slide Gate Op. 1/2HP 230V 1 Ph - Cold Weather Package NOT Included

Integral entrapment sensing system with digital set point for quick accurate adjustment and enhanced safety
Continuous-tone entrapment alarm with reset button
LED diagnostic display for ease of setup and troubleshooting
Selectable pre-start and run alarm with provision for ADA compliant visual pre-start and run alarm
Regulated 24 Volt DC power available for access control accessories
Integrated maximum run and auto close timer (0-9 minutes)

.......more details

K72-13059

LiftMaster Output Shaft Kit APT

Kit contains: Shaft Bearings Roll Pins Washers and Sprockets (41B10 x 3/4" & 41B16 x 3/4")

K12-8033

LiftMaster Female Rod End RH

Lower rod end for BG770 BG790
same as part # 12-8033

25-42-280

Extension Spring 7' Door - 280 lbs Gold w/ clip

Double - Loop
25" long 42" stretch 280 lb load
Sold individually
Rated for 10000 cycles

1104-8FT-BRONZE

Residential Side & Top PVC Weather-Strip with cap 8' Long - Bronze (F)

Bronze rigid vinyl retainer with bronze flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

1104-7FT-BRONZE

Residential Side & Top PVC Weather-Strip with cap 7' Long - Bronze (F)

Bronze rigid vinyl retainer with bronze flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

20-8100M-DC

LiftMaster Electric Motor for VSL 1 HP 90 VDC 1 ph

Replacement electric motor for VSL gate op.

H12G10-SS

Hinge #10 x 12 gauge Stainless Steel

Manufactured with 12ga. Rust-Resistant Stainless Steel
Universal Design
Fits Most Overhead Sectional Doors
Priced Per Each

K74-30754

LiftMaster Battery Harness 1 unit only

For LA400
2 harnesses required per operator- 1 for each battery

26CW94325-CUT

Truck Door Bottom Panel with Seal (15" x Cut-To-Size Painted White for Whiting Dryfreight

These panels are cut to customer's specifications
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
These panels have no routs and shipped without holes.
3/4" thick 7 ply exterior grade medium density plywood.
Painted white
Comes only with bottom retainer and seal (installed)

.......more details

9372263800

Square Torsion Spring .375 x 6 x 38" with Cones LHW 1-1/4" Bore

9382263800

Square Torsion Spring .375 x 6 x 38" with Cones RHW 1-1/4" Bore

19-5118-NP

LiftMaster Trolley Roller Chain Pack #41 for 18ft Door Nickel Plated

For 3/4 & 1 HP trolley operators

7119405

FAAC 400 Plug for End Cap

9291644400

Galvanized Torsion Spring .306 x 3-3/4 x 44" L with Cones LHW

053156

Magnetic Mount Micro Dome Beacon Amber ** To Extent of Inventory

60 LEDs 360 degree revolving flash / intermittent flash
-30 degree celsius to + 50 degree celsius extreme temperature reliability

K72-33873

LiftMaster Output Shaft Kit MT / BMT

Complete kit includes output shaft bearings sprockets chain roll pin and turac

25-01434

Truck Door Stainless Cables 110" 1/4 nylon eye 7x19 Pair for Roll-Up Doors

Works with both Whiting and Todco doors
Nylon eye ends are used 1/4" and 7/16" eye cables
Cross Ref: W4020-1

.306-6-R

Cut-to-Length Torsion Spring .306 x 6" Right Hand Wound Red

Priced per inch - cones sold seperately
For factory installed cones use part no. C-600-INSTALLED

15-50B35QGH

Sprocket 50B35 1-1/4" Bore 1/4" Keyway

PBS3-GREEN

Replacement Button Only - Green

Replacement button for 02-403P

10-11021

LiftMaster Disconnect Lever GH

K75-12586

LiftMaster Complete Brake Assembly GH 575V

Complete assembly includes: Brake hub kit Brake release lever Brake disk Spring cup Studs Compression springs Brake solenoid Solenoid cover Spacers Mounting plate Pressure plate Feather key and Fastener.

Installation Manual Manuel d'installation

1007-1-5/8-14

Aluminum Bottom Retainer Flat Fits Doors 1-5/8 to 1-3/4" Thick

For door thickness of 1-5/8" to 1-3/4"

1007-1-5/8-10

Aluminum Bottom Retainer Flat Fits Doors 1-5/8 to 1-3/4" Thick**Actual Length 10'1"

For door thickness of 1-5/8" to 1-3/4"

1013-1-1/4-8

Rigid Vinyl Bottom Retainer L-Shaped 8' Long

For door thickness: 1-1/4"

COVER048

Manaras Plated Solenoid Cover for OSH

Cover only

TC134-18

Top Cap 1-3/4" 18 ft Black Box Qty Only ** To extent of Inventory

Sold in box quantities only
12 pieces per box

K79-13493-2

LiftMaster Logic Board Replacement Kit FDCL

Replacement board for fire door model FDCL

TC134-12

Top Cap 1-3/4" 12 ft Black Box Qty Only ** To extent of Inventory

Sold in box quantities only
12 pieces per box

TC134-14

Top Cap 1-3/4" 14 ft Black Box Qty Only ** To extent of Inventory

Sold in box quantities only
12 pieces per box

.295-134-L

Cut-to-Length Torsion Spring .295 x 1-3/4" Left Hand Wound Blue

Priced per inch - cones sold seperately
For factory installed cones use part no. C-134-INSTALLED

1104-ASFT-7FT

Elton Aluminum Stiffener for 1104 7ft

Prevents the 1104 from buckling in the hot sun

.375-6-LH-C

Torsion Spring .375 x 6" x 144" LH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .375 ID: 6" Length: 12 ft

1104-8'-DK-SAND

Residential Side & Top PVC Weather-Strip with cap 8' Long - Dark Sandstone (DDG)

Garaga dark sandstone rigid vinyl retainer with Garaga dark sandstone flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

9382054125

Square Torsion Spring .343 x 5-1/4 x 41.25" with Cones RHW

41.25" long = 160 coils

9372054125

Square Torsion Spring .343 x 5-1/4 x 41.25" with Cones LHW

41.25" long = 160 coils

27-48-160

Extension Spring 8' Door - 160 lbs Brown

Single - Loop
27" long 48" stretch 160 lb load
Sold individually
Rated for 10000 cycles

Spec Sheet

27-48-150

Extension Spring 8' Door - 150 lbs Red

Single - Loop
27" long 48" stretch 150 lb load
Sold individually
Rated for 10000 cycles

Spec Sheet

27-48-110

Extension Spring 8' Door - 110 lbs White

Single - Loop
27" long 48" stretch 110 lb load
Sold individually
Rated for 10000 cycles

Spec Sheet

H12G06-SS

Hinge #6 x 12 gauge Stainless Steel

Manufactured with 12ga. Rust-Resistant Stainless Steel
Universal Design
Fits Most Overhead Sectional Doors
Priced Per Each

MOTOR258-WIRED

Manaras Electric Motor TEFC 3/4HP 120/240V 1PH Wired

Electric motor comes pre-wired for a brake
Must specify if operator is equipped with electronic circuit board or if it is hard-wired

9003-17FT-BLACK

Commercial Side & Top PVC Weather-Strip Reverse Angle 3" Track Bolt On 17' Long - Black

Black rigid vinyl retainer with black flexible vinyl insert.
Reverse angle bolt-on vinyl retainer.
Bolts onto reverse angle steel jamb.

Drawing

1224-1-3/4"-BLK

Elton Commercial Window for Flush Doors 1-3/4" thick 1224 Black Frame Sealed Glass

Screw together window kit
Thermal window
Frame size: 25-1/8" x 13-1/8"
Cut-out size: 24-1/16" x 12"
Vision area: 21-11/16" x 9-5/8"
Different glass options and frame colours are available upon request

.......more details

K72-12493

LiftMaster Limit Switch Kit

Complete kit with limit nut retainer switch plates backup plate depress plate limit switches (3) standoffs screws and locknuts
For logic control MT BMT MJ MH MHS