Devanco Canada - Get The Right Garage Door Opener‎ and Parts

MCJH-453-CONT-R

Lynx Heavy-Duty Jackshaft 3/4 Hp 575V 3 Ph Contactor Right Hand ** Replaced by CDJH

Sell Sheet

N7/9-MOD

Micanan Explosion Proof Modification

Modification available on certains models only

773

Fasteners Lag Screw Hex Washer High Profile 5/16" x 2-1/2" 1000/Box *** No Longer Available

7/16" Head
Hex washer high profile head

10-10875

LiftMaster Disconnect Lever H MH J **to extent of inventory

L-14-40-0-M

Cable Tie Standard 40 LB Black 14" Nylon 1000/pkg

Ultraviolet Resistant
Length: 14.50" / Width: .140" / Thickness: .058" / Diameter: 4.00"
Low insertion and pull through force
Advanced pawl and teeth design
Angled tail provides quicker initial insertion alignment
Tail finger grips allow easier handling and tightening

.......more details

65-5209

LiftMaster Manual Hoist Mod. Kit #48 Chain Drive

This is an available factory installed modification only

0-205679

Linear Proxpad Plus Integrated Prox Reader and Controller w/Keypad

Prox.pad™ plus is a fully integrated PC managed single door access system with a stand alone proximity reader and keypad.
The prox.pad plus when used on it’s own provides standard access control functionality with the use of it’s two relays and two inputs for request to exit and door position and enhanced system functionality when used with Hub Manager® Professional software.
The software allows the management of people and doors through easy to create reports and step by step wizard assisted expanded feature functionality.
The software can communicate to the prox.pad plus either through a 485 connection or on a LAN/WAN using the SEG-1 TCP/IP communication device.
By utilizing the proximity reader and keypad together a higher level of security is achieved by requiring both to grant access.
The prox.pad plus can be directly mounted to a single gang electrical box or to most flat surfaces.

.......more details

OGH-6214-M-N1-RH

Manaras 1 HP 240V 1Ph Gear Head Operator with Monitored ECB N1 Eyes Right Hand

A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
Includes a self-engaging chain hoist for manual operation
25 cycles per hour 80 cycles a day
Hoist on right side standard can easily be moved to the left in field
Full overload protection
BRACKET112 must be used for wall mounting

.......more details

T2-HBAG

Manaras Trolley Hardware Bag

Various fasteners

41A2818

LiftMaster Limit Switch Drive Gear Kit

For use with various LiftMaster® and Chamberlain® Residential Garage Door Openers.
Complete replacement kit includes: helical gear e-clip and grease tube

M-VERSION-N4

Manaras Monitored Entrapment Protection Option Upgrade Mont + N4/12 Eyes

Upgrades added when purchasing a commercial operator

K72-12493

LiftMaster Limit Switch Kit

Complete kit with limit nut retainer switch plates backup plate depress plate limit switches (3) standoffs screws and locknuts
For logic control MT BMT MJ MH MHS

71-65WTC

LiftMaster Weatherproof Case (71-65WTBOX)

Optional weatherproof case suited for 412LMC 422LMC and 423LMC
Measurements of the interior: W=5.75" L=7" D=3"
Measurements of the exterior: W=7" L=10" H=3.5"

18-11379

LiftMaster Compression Spring

K001A6424-1

LiftMaster Circuit Board Assembly Kit 2010 390 MHz

Installation Manual

16-5L300

LiftMaster Cogged Vbelt 5L 30"

.218-134-R

Cut-to-Length Torsion Spring .218 x 1-3/4" Right Hand Wound Yellow/Orange

Priced per inch - cones sold seperately
For factory installed cones use part no. C-134-INSTALLED

K-MALED-HDWCB

LiftMaster LED Barrier Arm Hardware Kit

Service kit to connect new LED arm to existing barrier gate
Includes bolts 3" (2) nylon nuts (2) washers (2) 1/2" watertight connector 48" extension cable for breakaway connector "Y" cable and 12 Vdc power supply

GALV-234-258-L

Cut-to-Length Torsion Spring .234 x 2-5/8" Left Hand Wound Galvanized Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

K77-38121

LiftMaster Wiring Harness SL585U SL595U

Compatible with LiftMaster® Models SL585U and SL595U Slide Gate Operators

Z9211-2

Stationary Cone Tool 2-5/8"

Easily dislodges the cone from the torsion spring

DS75

Light Commercial Non-Insulated Rollup Door with Exterior Curtain Lock ** Price by Quote Only

Mini Storage door non insulated with exterior curtain lock
Custom ordered to exact size
Available colors: Wayne Dalton White Glossy White Mist White Black Contemporary Brown Bronze Buckskin Desert Tan Polar Blue Pacific Blue Royal Blue Teal Bright Green Hunter Green Fern Green Sea Green Cedar Red Violet Red Patriot Red Silhouette Grey Yellow Maroon Harvest Orange Sunset Orange Tangerine

Sell Sheet Drawing

T114

Manaras Trolley Track 14ft for 3/4HP & All APT models up-charge *Actual length 198"*

For models MGT/OTH/OTBH 3/4 hp only with Chain #41

R5210

Pulley 4" Zinc Plated Steel with Sheave Strap

Bored for 3/8" diameter bolt
Maximum cable diameter: 1/4"
Hardened inner race
Includes fork

LB612-24SF

Steel Faced Laminated Bumper Black 12" x 24" 6" Projection Horizontal Installation

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required
“Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

BEARING047

Manaras Flange Bearing 2-Bolt Black for 1' bore

2 set-screw holes 1/4-28 at 90 degrees. Set-Screws NOT included
Replaces BEARING012

SPRING043

Manaras Compression Spring

Used on OSH OPH waterproof with brake

7FT-RAIL-CHAIN

LiftMaster 7' chain drive rail 1707LMC - colour code: Green

#48 chain size
Price reflects cost if purchased with an opener

768-500

Fasteners Lag Screw Hex Regular Profile 5/16" x 3" 500/Pail

7/16" head
Hex Regular Profile Head

19-80ML-NP

Master Link #80 Nickel Plated

For #80 chain

26-94522

Truck Door Intermediate Panel (12" x 98") for Whiting Dryfreight

These panels are cut to an extra wide width to fit wider vehicle applications.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
3/4" thick 7 ply exterior grade medium density plywood. Primer finish

TB610-24SF

Steel Faced Laminated Bumper Black 10" x 24" 6 3/4" Projection Horizontal Installation

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required
“Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

.319_3-3/4"-RH

Torsion Spring .319 x 3-3/4" x 12ft RH Blue/Green

Wire size: .319
Inside diameter: 3-3/4"
Length: 12 ft

7001-14-BLACK

Commercial Side & Top Weather-Strip 14' Long - Black (Code B)

Black galvanized steel with black dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.

4002-12FT

45 Degree Aluminum Retainer for Light Brush 12' Long 45 degree

For angle application (45 degree)
For use with Light Brush or Vinyl Insert.

PRO-HB-5083U-LH

Micanan 1/2HP 208V 3P Hoist Op. with Brake N1 Eyes Monitored ECB Left Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake included
On-Board receiver holds up to 20 transmitters

BMBOX-HARDWARE

Complete Hardware Box for Big-Metro BMBOX

Foundation box for Big-Metro gate operator
Kit includes: (1) #60 – PMD1025.4610 – MECHANICAL STOP BOLT NUT (1) #62 – V12X30.5102 – BOLT MECHANICAL STOP (1) #63 – D12B/5110 – NUT MECHANICAL STOP (1) #61 – D18.5110 – NUT M18 (1) #52 - 5PMCS1.4630 – BALL BEARING (1) #58 – PPD2288.4540 – NYLON HINGE COVER (2) #65 – 16X1.5124 – SCREW FOR LID COVER (4) #64 – D.12.5110 – NUT M12 LOCK NYLON

616001404

Rolling Steel 900 Series Guide Channel Sold per Foot

Assemblies of strucural steel angles bolted to the wall supporting the entire weight of the door.

.363_6"-LH

Torsion Spring .363 x 6" x 12ft LH Green/White

Wire size: .363
Inside diameter: 6"
Length: 12 ft

41A5021-9G-315

LiftMaster Circuit Board Assembly

Board: Security+ 315 MHz
Aeesmbly includes: circuit board and end panel
Also includes 1 Multi-Function wall ctrl panel - 2 wire
For ATS2113X model
For older ATS operators use replacement board 41A5021-1ATS

HD3076

Lift Handle Roll Grip Round Zinc Plated 5-1/2"-5-3/4"

Measures 7" from end to end
Measures 5.5" from eyelet to eyelet

EHJX-353-3/4

Doorlec Industrial Jackshaft Op. Explosion Proof 3/4 HP 575V-3Ph ** Price on Request

Explosion proof NEMA 7/9 Heavy-Duty Industrial Operator
DC-2000 logic with adjustable Timer To Close Delay On Reverse.
Solenoid Brake prevents coasting and secures the door when closed
Explosion-proof (sealed) continuous-duty electric motor with overload protection
Automatic Friction Clutch protects the door and operator
Self-aligning Heavy Duty sealed Pillow Block bearings on all shafts for high cycle applications

.......more details

PDC300-CH-OPTION

Pulse300 Chain Hoist Option Only

Added option to a Pulse 300 operator

BGARM12ART84

LiftMaster TECHNA Barrier Gate Arm 12 ft w/84" Clearance without LED

12’ Functional length arm with an 84” articulated clearance height from the base of the arm
All parts ship in a single carton box for convenient transport and storage ensuring easy on-site assembly. The arm is field-customizable for added flexibility.
Made from durable aluminum extrusion with secure fasteners for a reliable fit. Arm joint uses bolts nuts and washers for stability and are reinforced by a torsion bar for added strength.
Operating Temperature: -13°F (-25°C) to 140°F (60°C)
Requires TECHNA PARKING operator.

BGARM12ART98

LiftMaster TECHNA Barrier Gate Arm 12 ft w/98" Clearance without LED

12’ Functional length arm with an 98” articulated clearance height from the base of the arm
All parts ship in a single carton box for convenient transport and storage ensuring easy on-site assembly. The arm is field-customizable for added flexibility.
Made from durable aluminum extrusion with secure fasteners for a reliable fit. Arm joint uses bolts nuts and washers for stability and are reinforced by a torsion bar for added strength.
Operating Temperature: -13°F (-25°C) to 140°F (60°C)
Requires TECHNA PARKING operator

PBG24DC

LiftMaster Techna DC Barrier Gate Operator Grey Cabinet Arm & Heater Sold Separately

GDO Learn Button Color Compatibility (Learn Button Color ): Connect to other gate operators via menuinterface and programmable relays
Connectivity: Wi-Fi and Ethernet
Event History: 50
myQ Compatibility: Supports myQ Facility with dedicated Parking
Operating Temperature: Without heater: -4°F (-20°C) to 140°F (60°C); With optional heater: -40°F (-40°C) to 140°F (60°C Outdoor Rating IP65
Display Type: LCD color display with 4 button interface

.......more details

K94-36891

LiftMaster Battery Wiring Harness 7AH

For use with various LiftMaster® Linear Actuator Residential / Commercial Swing Gate Operators

028-201

Blue Giant Photoswitch 10-30VDC 50CM Range 5M Cable SMP8500/5PG5 **Special Order

Light Source: Infrared (880 nm)
Control Feature: Sensitivity pot. and light/dark switch
Output Status: N.C/N.O
Housing: M18 x 1

112498.0001.S

Genie Release Kit Expf *** Price by Quote

CPT215-END-KIT-U

Miller Edge Universal End Kit for CPT215/223

Kit contains: 2) Caps (2) cages (1) wired plug (1) 10K plug (1) 8.2K plug (1) diode capacitor plug (1) non-mon. plug end plug (2) screws
This end cap will also work on the CPT223 extrusion

111859.0001.S

Genie / OHD Shaft Assembly HXH/RHX-Hoist *** Price by Quote

22DUALTROLLEY16

LiftMaster Dual Trolley Mod for TDC12 TDC22 to 16ft high **includes (TDC41-16) CHAIN PACK (10-5816) 16 FT RAILS x (11-52102) 1" Solid Shaft 12ft (DualAuxTrolley41) Hardware kit

Includes: TDC48-20 CHAIN PACK #41 16 FT RAILS x 1 11-5220 CRSBARROUND1" X 12' x 1 10-5820-P TRACKTROLLEYFOR 16FT DOORPRE-PUNCHED x 2 DUALTROLLEYMOD41 MOD-KITDUAL TROLLEY41 CHN x 1

1222_DUAL_TROLLEY_20'

LiftMaster Additional Trolley kit for TDC operators for 20' high door includes #41 Chain for 20ft High Door Angle tracks (2x) 20' (Actual length 275") and (1x) shaft

Provides a second drawbar-type operation on wide standard door
Includes 20ft tracks #41 chain hardware & Round Bar 1" x 12'
Works with TDC12 & TDC22 Maxum operators

MGH-6537-0M00

Manaras 3 HP 600V 3P Jackshaft monitored Right Hand

A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
Electrically activated drum-band type solenoid brake
Full overload protection

26004A.S

Genie Bolt Retainer

The bolt retainer is used with the bolt that secures the pulley bracket to the pulley support

PRO-HBH-7581U-L

Micanan 3/4HP 208V 1P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Left Hand

3/4 HP208V 1PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
N-1 Through-beam (MK-00649) photocells included. Other options available.
3-btn O/S/C (02-103) wall control station included
Adjustable Friction Clutch 5L320 drive belt
#50 Roller chain 18 tooth door sprocket included

.......more details

RGHW-6214-MON-L

Manaras 1 HP 240V 1Ph Rapido Gear Head Carwash Mod Monitored ECB w/Eyes Left Hand

Rapido version of model OGHW
Includes Monitored Waterproof photocells

7DUALTROLLEY20

LiftMaster Dual Trolley Mod TDC 7 to 20ft **TDC48-20 CHAIN PACK #48 20 FT RAILS x 111-5220 CRSBARROUND1" X 20' x 110-5820-P TRACKTROLLEYFOR 20FT DOORPRE-PUNCHED x 2DUALTROLLEYMOD48 MOD-KITDUAL TROLLEY48 CHN x 1

Includes: TDC48-20 CHAIN PACK #48 20 FT RAILS x 1 11-5220 CRSBARROUND1" X 20' x 1 10-5820-P TRACKTROLLEYFOR 20FT DOORPRE-PUNCHED x 2 DUALTROLLEYMOD48 MOD-KITDUAL TROLLEY48 CHN x 1

MYQ-C23ACXW

LiftMaster MYQ Garage Camera Magnetic Mount Motion detection & 2-way talk

The LiftMaster Smart Garage Camera™ is compatible with all myQ connected garage door openers.
It works directly with all LiftMaster openers with the Wi-Fi logo and can work with most garage door opener brands manufactured after 1993 when paired with the myQ Smart Garage™ Hub(821LMB).
myQ Connected: monitor the garage through a live feed or recorded event using the myQ app.
Video camera begins recording when motion is detected.
Easy setup with Bluetooth and magnetic mounting base.
Enables secure in-garage delivery for Amazon Prime packages

.......more details

15-48B18LGE

LiftMaster Sprocket 48B18 1"x 1/4"

Also known as: 15-9004 1548B18LGE 159004

Z9962

L5 Operator Mounting Bracket

Compatible with L5 Jackshaft operators
Eliminates the need for a spreader arm by mounting a fixed bearing on the operator adjustment plate preventing the torsion shaft and operator from moving closer together
Precise chain tension adjustments through the adjustment bolt
Maintains parallel alignment between the operator output shaft and the door’s torsion shaft during chain tensioning
Operator installation is made easier by allowing the bracket to be hung on the torsion shaft via the bearing supporting its weight during fastener installation thereby removing the need to hold the operator manually
Has physical tick marks on both sides of the bracket and at the center of the bearing plate to indicate the torsion shaft’s center position allowing bracket to be accurately mounted prior torsion shaft installation

.......more details

28412

Doorlec Flange Bearing 5/8" Bore Oilite Bushing

Works on GH/GHX

26130

Doorlec Hoist Shaft Threaded 5/8" x 12" GH/GHX

Works on GH/GHX

TXTA-KYPD

Pulse Universal Wireless Keypad

Programmable 4-digit code for continuous use.
Programmable TEMPORARY 4-digit code for programmable number of uses.
Multi-Brand Adaptable: Works with all Pulse receivers LM receivers (GreenOrange Red Purple and Yellow learning codes) and other receivers with 315MHz or 390MHz.
Powered by 9V battery. (One included in package)

35.0245

BEA LZR-WIDESCAN Replacement Cover Only Black

Replacement cover for the LZR-WIDESCAN sensor

27121-480V

Doorlec Electric Motor 1-1/2 HP 480V 3PH DC223C

026-122

Blue Giant Heater Element **Special Order

Price by Quote Only

SR-9004-WHITE

Elton Reverse Angle Clip-On Vinyl White 200ft Roll

Side Use – Clips onto Steel Jamb
Also for Residential Use

31376-2

Doorlec Sprocket 60B65 2" Bore

1326-112-BLK-PLEXI

Elton Commercial Window 1-1/2" thick 1326 Black Frame Sealed Plexi Glass

Screw together window kit
Frame size: 26-1/8" x 13-9/16" (Tip to Tip)
Cut-out size: 25-1/16" x 12-9/16"
Vision area: 23-7/16" x 10-13/16" Corner Cut 4" Radius
Different glass options and frame colours are available upon request

OTBH-6533-AM05

Manaras Trolley Operator 3/4 HP 600V 3Ph Monitored Board w/N4 Eyes Apt. Model

The Silencio model is a low headroom apartment type operator designed for use on industrial standard lift sectional doors with high daily use requirements
100 cycles per day
It incorporates a drum-shoe type solenoid brake.
Tracks are an extra 36 lbs per track
#41 full roller chain
Includes monitored N4X eyes (PHOTO 061)

.......more details

G-21X13-134-CHRCL

Thermal Window Clear 21" x 13" for 1-3/4" Garaga Door Charcoal

For 1-3/4" thick door

G-40X13-134-CHRCL

Thermal Window Clear 40" x 13" for 1-3/4" Garaga Door Charcoal

For 1-3/4" thick door

K07-8003

LiftMaster lower Crank Link BG770/790 Barrier Gate

For use with BG770/790 barrier gate operator

2807.182*290

Whiting Spring Assby .182 x 2-3/16 x 29" Curbside

Replacement torsion spring with cones
Specs: .182 x 2-3/16" x 29" Long
Roadside
For Roadside order part # 2807.182*290

SM102

Miller Edge Signature Module w/Junction Box for 10K (T2) Sensing Edges

SM-102: Converts a 10K resistive signal
Module: 1.8”H x 1.25”W x 0.8”D (46 x 32 x 20 mm)
Junction box: 1.5”H x 4”W x 2”D (38 x 102 x 51 mm)
Module: ABS plastic with epoxy
Junction box: Galvanized steel
Module: NEMA 4

.......more details

CYL-3BXLT

Replacement Cylinder Only for 3BXLT Comes with 2 Keys

K41-0071-000

LiftMaster HD Power Board Service Kit for HDSL24UL/HDSW24UL

Compatible with the following models: HDSL24UL HDSL24ULMC HDSW24UL HDSW24ULMC

10TD900PB

BEA Wired Transmitter 900mhz Flagged Flag Connectors AAA Battery

Multi-colour LEDs on receiver provide installer with visual notification of signal strength and activation status.
Frequency: 908-918 MHz
Radio Control Type: Digital
Programmable Capacity (standard): 75/unlimited universal
Operating Temperature: -10-55C

1-0232

RW Hinge 434WM-BB Black 48" 3/8" x 3" wide Sold per Hinge

Pintle: Formed Steel 3/8" Thick
Strap: Formed Steel 3/8" thick x 3" wide
Pin: Zinc Plated Loose pin with cotter pin 1" diameter steel
Bearings: Precision Ball Bearings
Black Enamel

2200-936

Linear VBelt 25 4L Cogged

PRO-HBH-10083U-R

Micanan 1 HP 208V 3P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Right Hand

1 HP208V 3 PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
N-1 Through-beam (MK-00649) photocells included. Other options available.
3-btn o/s/c (02-103) wall control station included
Adjustable Friction Clutch 5L320 drive belt
#50 Roller chain 18 tooth door sprocket included

.......more details

10TD433HH2

BEA 2-Button Digital Transmitter 433 MHz

Transmitter offering means of activation of automatic doors with extended hold feature.
Delay and no-delay learn modes for either instant of delayed activation for sequencing doors.
Operating temperature: -10 to 55C
Controls one 10RD433 receiver.

39794A.S

Genie Universal Cable Keeper Kit 39794A.S

Universal Cable keeper kit for Genie Wall Mount garage door openers.
Compatible with models 6070H 6070H-B 6170H 6170H-B 6172H 6172H-B 6072
Genuine Genie Replacement Part

L956W

LiftMaster Wireless Multi-Function Control Panel Security+ 3.0

Wireless control panel can be installed almost anywhere in the garage.
Includes a large push bar for garage door opener operation and a light control button.
Built-in learn button enables fast & easy programming of remotes keypads myQ® accessories and Wi-Fi garage door openers.
Compatible only with LiftMaster Security+ 3.0™ garage door openers.
No wiring required. Powered by CR2032 battery (included).
Warranty: 1 Year

.......more details

Installation Manual Manuel d'Installation Compatibility Chart 2025 Comparison Chart 2025

3-5273

Serco Pusher Assembly AB1000

MX000585-0

HySecurity Smart Touch Controller Board

Easy Installation Configuration
Warning Buzzer and Alarm System
Ethernet Connectivity via HyNet Gateway
Security Monitoring and Breach Reporting
Allows for the configuration of over 70 different settings for a reliable and highly customized gate operator

MX000641

HySecurity Left Counterweight Mount for StrongArm

Compatible with StrongArm systems
Designed for left-hand configurations
Supports balanced gate movement
Reduces strain on gate operators

K07-2706

LiftMaster Arm Hub

Also known as: 072706 07-2706 07-2706-1 G072706
For use with various LiftMaster® SW420 Series Swing Gate Operators

02-401M

LiftMaster 1-Button Control Station

For use with various LiftMaster® Logic 4.0/5.0 and MAXUM Series Commercial Door Operator Applications
Sends the door to the full open position. Perfect for time sensitive situations.

CTU48

Erone UHF ISO RFID Card U4GO Sold in Pack of 10

Compatible with A6U49 and A10U49
Pack of 10 cards
Customized printing available upon request
Available in dual technology (UHF + DESFire® EV2): CTU48EV2
Dimensions: 3.4 x 2.1 x 0.03'' (85.6 x 54 x 0.8 mm)

111-0362

RW Box Track #333 10ft

For doors up to 1000 lbs
10 ga steel

7-6100

RW Hanger 160B2 Sold per Unit

Hanger used on #333 track
For door thichness: 2-1/4" to 3-1/2"

MM00078

Micanan Solenoid Lever Limited Duty MSI0094

O02R9508

AirLift U Cup

7909212

FAAC Control Panel Main Circuit Board for FAAC 844

2100-917-UPS

Linear Shaft Output 1" HSLG UPS

K20-1050C-2LP-H26

LiftMaster Electric Motor 1/2 HP 115V 1Ph Logic 5

Also known as: K20-1050C-2LP-H24
1/2HP Motor Replacement Kit (115/230V 1PH L5).
For use with various LiftMaster® 1-Phase Logic 5.0 Commercial Door Operators and Commercial Access Systems