Devanco Canada - Get The Right Garage Door Opener‎ and Parts

CDJH-12-115-UL

Lynx CDJH HD Jackshaft hoist commercial operator 1/2 HP 115V with ECB UL325

New LX100 circuit board.
Built-in 3-channel 372 Mhz radio receiver accepts up to 20 remotes
4L V-belt primary reduction #41 drive chain and sprockets.
Adjustable friction clutch Inherent Mechanical Brake included
Fully driven adjustable limit switches.
Heavy duty 3 button wall station (Open Close Stop).
Adjustable spreader bar assembly included.
External 3 pole terminal strip for radio control.
Internal 9 pole terminal strip for all auxiliary devices.
Quick release chain hoist device for emergency manual operation.

2500-1495

Linear Pushbutton Stop/Reset

5001-7-CREAM

Residential Side & Top Weather-Strip 7' Long - Cream

Painted aluminum retainer with flexible dual fin vinyl.
Residential use.

DC300-50-1

Dyna-Hoist 300 Series Direct Drive BBU 1/2 HP 110/240V 1" Shaft 40:1 Ratio ** Quote Only

Special-Order. Price by Quote Only
Automated battery backup - the unit continues to work on batteries with full functionality (but does move more slowly) until the unit gets to about 75% of battery capacity then transitions to push and hold operation.
The 300 series also works with and powers 12V automatic lock systems
Option available: 5-conductor cable (5') to reduce the risks of miswiring incidents available in 5' 10' 15' 20' or 25' lengths
Integrated software fuse that shuts down the unit to help prevent board component disasters should these be incorrectly installed on grossly imbalanced or improperly sized doors.
30:1 40:1 50:1 gearbox ratio are available. Please specify when ordering otherwise 40:1 will be supplied

.......more details

MGH-6215-M-N1-RH

Manaras 1.5 HP 240V 1P Jackshaft Monitored w/N1 Eyes Right Hand

A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
Electrically activated drum-band type solenoid brake
Full overload protection

7131

Whiting Brush Side Seal Assembly; 7/8"

Quote required prior to sale to ensure correct fit

CP-LEV-BRAKE

Lynx Brake Lever

801-300-002-01-REFURB

Refurbished 801-300-002-01 Unit

DC300-CABLE-P/FT

Dyna-Hoist 5-Conductor Cable Sold per Foot Increments of 5ft- Max 25ft

Sold in increments of 5ft to a max of 25ft

10TD900HH1

BEA 1-Button Transmitter 900 MHz

Compact transmitter allowing wireless activation of any door control providing greater line-of-sight distance than legacy wireless frequencies.
It also provides better penetration of obstacles.
Operating temperature: -10 to 55C
IP65

MOD151

Manaras 1-1/4" Output Reducer OGH 1/2 to 1HP

Add-on to a OGH operator

E/1929/236

Automatic Systems Rod Assbly w/2 Rod Ends (BL229)

Used on the BL229 gate op.

C12

Felco C9 Cable Cutter 3/8" Capacity

The FELCO C12 a two-hand wire and cable cutter designed for precision.
Made with unbreakable forged aluminum handles and high-quality hardened steel blades
The triangular cutting system allows for clean cuts without crushing the cable while the ergonomic design provides comfort and efficiency.
Length: 19.69 in
Weight: 3.75 lb
Cutting diameter: 0.47 in

.......more details

MC271-2W-RH-GRAY

Miller Edge MC271 2-Wire Non-Monitored Right Hand Gray Includes End Flaps - Sold per Foot

Ideal for Cornell double angle bottom bar
Flexible and will conform to floor irregularities
Optimum size for 2+ inch thick surfaces
Custom manufactured to user specifications for color length and outlet location
5-inch end flaps create a complete seal and can be trimmed for custom fit
Sealed assembly impervious to dust and debris

.......more details

27209

Doorlec Electric Motor TEFC 3HP 208/480/575V 3-Phase DC333C

Frame size is 56C

K41-0240-000

LiftMaster Idler Sprocket Qty 2 IHSL24UL

41-0240-000 is a Idler Sprocket Service Kit. Compatible with LiftMaster® IHSL24UL Series Industrial Heavy Duty Slide Gate Operators. Complete kit includes: (2) Idler Sprockets. Check the installation manual or replacement parts diagram for specific part information before ordering to ensure compatibility.

7176.218*29.091

Whiting Heavy Duty Torsion Assembly .218 x 29" shaft 91"

TS-1-183-GALV-KEY

Tube Shaft 1" x 183 (15'.25) Galv w/KW 1/4" x 3/8"

When ordering order one foot longer that actual door width
Comes with 3 keys 1/4-3/8-3'' long

CPT210-END-KIT-U

Miller Edge Universal End Kit for CPT210

Kit contains: 2) Caps (2) cages (1) wired plug (1) 10K plug (1) 8.2K plug (1) diode capacitor plug (1) non-mon. plug end plug (2) screws

SPR50B42X138

Sprocket 50B42 1-3/8" KW 2SS 5/16-18

42 tooth sprocket for #50 chain

RDRG63.3.1-1:1/2

Maximum Output Torque Generated Chain Hoist Rolling Door w/4B60HD-1:1/2K3/8-2S5/16SQ ** Spec Order

BMT5011U

LiftMaster 1/2 HP 120 Volt Medium Duty Trolley Operator with Solenoid Brake

1/2 HP 120 volt 1 phase medium-duty logic trolley operator with brake
Medium-duty logic board with integral 315 MHz radio receiver
CPSU commercial photoeyes included
4L V-Belt #48 drive chain adjustable friction clutch
Use on standard lift sectional doors up to 14' high and up to 12 cycles per hour
2 year warranty

.......more details

MOTOR257

Manaras Electric Motor TEFC for N4/12 1/2HP 120/240V 1PH

Continuous-duty base mount TEFC 60Hz
For N4/12 type operators

RB-TX10C

Miller Edge RBand Monitored Wireless Edge Transmitter

RBand transmitter only
On board diagnostics allows for easy set up and troubleshooting.
Offers pulsed and normally open outputs.
Ideal for commercial door operators manufactured after 2010.
Bi-directional link improves immunity to RF interference.
Nema 4

.......more details

WHITING-COLDSVR

Whiting Cold Saver Panel Special Order- Made to Measure Quote Only

Special Order Sold by Quote Only

CP-SH-34-MC3-65

Lynx Complete Limit Shaft Assembly #65 Chain

For trolley operator

5001-16-SANDSTN

Residential Side & Top Weather-Strip 16' Long - Sandstone

Painted aluminum retainer with flexible dual fin vinyl.
Residential use.

REDUCER012

Manaras Reducer DSM 70 44:1 FR56C

MD00027

Micanan Disconnect Coupling 3/4" ID PRO-J/LJ

Sold individually

OPJ-6233-M-N1

Manaras Heavy-Duty Jackshaft Operator 3/4 HP 208V 3 Ph Monitored ECB w/N1 Photoeyes

An industrial operator designed for use on standard high and vertical lift sectional doors
Can also be used on rolling doors and grills
It incorporates a floor level disconnect mechanism for manual operation
25 cycles per hour 100 cycles per day
Continuous-duty single phase capacitor start or 3 phase motor open drip proof
Mechanical brake

.......more details

BCSI-PM02

Pivin Drapeau Bearing 1" FL205 *** Price by Quote Only

SHAFT048

Manaras Trolley Output Shaft

BEA-35-1242

BEA 30' Harness 8-Conductor LZR

Power cable LZR-I100

41A3589-2

LiftMaster 10ft Belt Assembly for Models '93-2000

For use with LiftMaster belt drive models 1270 1280 1280R.
Full belt assembly
For use with Chamberlain belt drive models 8100 8200 and 9200.
For standard 10 foot high garage doors
T rail assemblies ONLY.

B/CDJH-34-115-UL

Lynx CDJH Heavy-Duty Jackshaft 3/4 HP 115V w/ ECB and Solenoid Brake Right Hand UL325

3 Button station (NEMA 1) Photoeyes 1-Btn Transmitter
1650 RPM high starting torque motor with overload protection
Inherent Mechanical Brake (I.M.B)
B2 Mode C2 Mode D1 Mode E2 Mode T Mode TS Mode
On board Open Close & Stop for ease of setting limits
Pre-wired to accept sensing devices

.......more details

CLM125-HC

Linear Custom Credential Clamshell Card HID 125kHz Proximity Support 25 pk

Made of sturdy ABS plastic Off White
Complies with the Wiegand communication protocol and is compatible with certain HID prox card readers
Contactless: up to 8" read range
Supports printable 14 mil CR80 adhesive-back PVC cards
Sold in lots of 25
Same as: 830-00420

.......more details

29140

Doorlec Transformer 230V pr 120V sec 50VA

230V primary 120V secondary 50VA

K41-0372-999

LiftMaster Drive Sprocket Chain Repair Kit

Repair Kit to correct quality issue with TDC1200 & 2200 Maxum trolley openers
MAXUM CDO SKUs affected TDC7S1BMC TDC7S4BMC TDC12S1BMC TDC12S4BMC TDC12X1BMC TDC12X4BMC

GALV-273-2-L

Cut-to-Length Torsion Spring .273 x 2" Left Hand Wound Galvanized Orange/Red Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

GALV-319-334-R

Cut-to-Length Torsion Spring .319 x 3-3/4" Right Hand Wound Galvanized Blue/Green

Priced per inch - cones sold seperately
For factory installed cones use part no. C-334-INSTALLED
Galvanized

GALV-312-258-L

Cut-to-Length Torsion Spring .312 x 2-5/8" Left Hand Wound Galvanized Yellow

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED
Galvanized

GALV-306-258-L

Cut-to-Length Torsion Spring .306 x 2-5/8" Left Hand Wound Galvanized Red Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

GALV-283-334-R

Cut-to-Length Torsion Spring .283 x 3-3/4" Right Hand Wound Galvanized White Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-334-INSTALLED

GALV-283-258-R

Cut-to-Length Torsion Spring .283 x 2-5/8" Right Hand Wound Galvanized White Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

GALV-250-334-R

Cut-to-Length Torsion Spring .250 x 3-3/4" Right Hand Wound Galvanized Price per Inch

Priced per inch
For factory installed cones priced seperately - use part no. C-334-INSTALLED

GALV-273-334-R

Cut-to-Length Torsion Spring .273 x 3-3/4" Right Hand Wound Galvanized Orange/Red Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-334-INSTALLED

3228.3

Whiting 2" Nylon Roller 3" Stainless Steel Shaft

This is a Whiting original roller

GALV-243-258-L

Cut-to-Length Torsion Spring .243 x 2-5/8" Left Hand Wound Galvanized Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

GSD103L5R

LiftMaster Heavy Ind-Duty Slide Operator 1HP 208/230/460VAC 3PH

GT103L5

LiftMaster Heavy Industrial-Duty Trolley Op. 1 HP 208/230/460VAC 3PH

Suspended from the ceiling the operators are used on sectional overhead doors with a standard lift.
GT operators are directly attached to drive and control the door
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Requires 828LM MyQ Internet Gateway to connect to MyQ Smartphone App.
High-starting torque continuous duty motor with overload protection
Door speed approx. 11-12 inches per second

.......more details

GALV-406-6-144-L

Torsion Spring .406 x 6" x 12ft LH Galvanized Blue/Yellow

Wire size: .406
Inside diameter: 6"
Length: 12 ft
Galvanized Stenciled

GALV-225-2-R

Cut-to-Length Torsion Spring .225 x 2" Right Hand Wound Galvanized Orange/Green Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

3B4X-SS

Control Station Exterior Stainless Steel Enclosure Surface Mount O/C/S N4X

OPEN-CLOSE-STOP Push Button
Stainless Steel Enclosure
Buttons aligned vertically
Dimensions: H=6-3/4"” W=3-1/2"” D=3-1/2"”

GALV-393-6-144-L

Torsion Spring .393 x 6" x 12ft LH Galvanized Orange

Wire size: .393
Inside diameter: 6"
Length: 12 ft
Galvanized Stenciled

E/0172/166

Automatic Systems Spring Assembly

CP35

Roller Chain Puller 35-60

Allows chain to be pulled together for attachment of the master link
For 35 thru 60 chain

44-60-160

Extension Spring 10' Door - 160 lbs

Clipped ends
44" long 60" stretch 160 lb load

41D3485

LiftMaster Chain Kit 10'

For use with various chain drive garage door openers that utilize a T-rail and have a 10' garage door
Same as 041D3485

E/1929/201

Automatic Systems Limit Switch Assembly

Used on the BL229 gate op.

E/BLOP/118

Automatic Systems Option Double Limit Switch

OTBH-6212-M-N1

Manaras Trolley Operator 1/2HP 240V 1Ph Monitored w/N1 Photoeyes

The OTBH is a heavy-duty low headroom trolley operator
Designed for use on industrial standard lift sectional doors
It incorporates a drum-band type solenoid brake
25 cycles per hour 80 cycles per day
1/2 HP operators come with # 48 (410) roller chain
Includes PHOTO-070

.......more details

OSH-6114-M-N1-RH

Manaras Opera-SH 1 HP 120V 1 Ph Monitored w/N1 Eyes Right Hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
25 cycles per day > 100 cycles per day

.......more details

Installation Manual

2200-983-UPS

Linear Brake and Puck Assembly UPS HSLG

GHX-353-1.5HP-R

Doorlec Explosion Proof Gear Head 1-1/2 HP 575V 3PH ECB Right Hand

Nema 7/9 control box
Electrical connections from motor to control box consists of hazardous location certified fittings
NEMA 7/9 O/C/S push-button station included

MD-00033

Roller Chain #60 10' per Pack

15-50B50QGH

Sprocket Kit 50B50 1.25" Bore x 1/4" Key w/ SS

MA035RDOT

LiftMaster 9ft Square PVC Barrier Arm Only (Articulating Hardware NOT included)

9' Square Arm
PVC
Red & White Retro-Reflectorized DOT Tape
Hardware NOT included

OPH-6214-M-N1-RH

Manaras Opera-H 1 HP 240V 1Ph with Monitored Board and N1 Photoeyes

A heavy-duty industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a self-engaging chain hoist for manual operation
Clearence: side room required 15"

MV00080

Micanan Emergency Egress Device 15ft

GALV-295-258-L

Cut-to-Length Torsion Spring .295 x 2-5/8" Left Hand Wound Galvanized Blue Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

TDC1222-16

Liftmaster Comm. 16FT Trolley Angle set (10-5816-P x 2) and #41 chain pack (TDC41-16) ***Actual length 227"***

Double Angle Rails for doors up to 16'6" high
Includes #41 chain pack

S50E

LiftMaster Small Profile Ends Kit 10 Sets of 2

Fast easy to install and cost effective system no glue is required
One end for output wire other end with resistor for monitoring
Compatible with S50 Small Profile Edge
Includes: (10) sets of 2

041-0347-000

LiftMaster Camera Replacement Kit

Compatible with models featuring a yellow learn button and Secure View™ Video Camera; manufactured after 2021 only.

343

Cable Clamps Galvanized 3/8" Sold per piece

Galvanized malleable cable clip

IRB-MON2

EMX Industries Universal Thru-Beam Photocells UL325 Built in Hoods

Kit includes transmitter receiver integrated protective hoods and removable lens sunshield
Thru beam configuration
UL325 compliant
Four (4) monitoring interfaces
115 ft. operating range
Easy installation and set-up

.......more details

Manual Sell Sheet

SHAFT028

Manaras FDGHE Cam Shaft 5/8"-18

70600.000

Todco 2" Nylon Sealed WondeRoller

Special Order Item
Perfect for dry freight applications this roller has been tested to last 5 - 10x longer than a standard roller.
A fully sealed bearing to keep dust and debris out
2 Inch Track WonderRoller is a nylon-coated-stem track roller for larger application panel truck doors
Polymer vinyl roller head couples with this stem to suit the constant up-and-down and roadway jostling on a freight or other large truck
Roller prevents build up in bearings with a sealed external washer

.......more details

041C0010

LiftMaster Chain Spreader 3/4hp

For use with various LiftMaster® and Chamberlain® 3/4 HP Chain Drive Garage Door Openers

OTBHW-6112-AM06

Manaras Apt-Style Trolley Op w/Carwash Mod 1/2HP 120V 1Ph Monitored w/N4 Eyes Silencio

The Silencio operators have integrated noise reducing enhancements which make it 4X QUIETER than the Premium Trolley Apartment model (OTBH-A.05).
A low headroom apartment type garage door operator designed for use on industrial standard lift sectional doors with high cycling daily frequency requirements
Mounting (Low Headroom Design): Ceiling-mounted with only 6.25" headroom clearance required below the tracks. For indoor use only.
Dimensions: Back Room: door height + 4'5" (1350 mm)
Head Room For Tracks: 5.625" (143 mm) above the highest point of door travel
Comes with carwash modification and tracks/chain for doors up to 12ft

.......more details

041D0190

LiftMaster Power Cord RJO

Replacement 6' AC Power Cord
For use with various LiftMaster® and Chamberlain® RJO Series Wall Mounted Garage Door Openers and Light Duty Commercial Door Operators

41B5348-2

LiftMaster Socket and Hub Kit 8360/8360W

Compatible with LiftMaster® Models 8360/8360W Chain Drive Garage Door Openers

GALV-331-334-144-R

Torsion Spring .331 x 3-3/4" x 12ft RH Galvanized Red/White

Wire size: .331
Inside diameter: 3-3/4"
Length: 12 ft
Galvanized

GALV-331-258-144-R

Torsion Spring .331 x 2-5/8" x 12ft RH Galvanized Red/White

Wire size: .331
Inside diameter: 2-5/8"
Length: 12 ft
Galvanized

GALV-319-334-144-L

Torsion Spring .319 x 3-3/4" x 12ft LH Galvanized Blue/Green

Wire size: .319
Inside diameter: 3-3/4"
Length: 12 ft
Galvanized

GALV-306-334-144-R

Torsion Spring .306 x 3-3/4" x 12ft RH Galvanized Red

Wire size: .306
Inside diameter: 3-3/4"
Length: 12 ft
Galvanized Stenciled

GALV-306-258-144-L

Torsion Spring .306 x 2-5/8" x 12ft LH Galvanized Red

Wire size: .306
Inside diameter: 2-5/8"
Length: 12 ft
Galvanized Stenciled

GALV-283-334-144-L

Torsion Spring .283 x 3-3/4" x 12ft LH Galvanized White

Wire size: .283
Inside diameter: 3-3/4"
Length: 12 ft
Galvanized Stenciled

GALV-283-258-144-R

Torsion Spring .283 x 2-5/8" x 12ft RH Galvanized White

Wire size: .283
Inside diameter: 2-5/8"
Length: 12 ft
Galvanized Stenciled

GALV-283-2-144-R

Torsion Spring .283 x 2" x 12ft RH Galvanized White

Wire size: .283
Inside diameter: 2"
Length: 12 ft
Galvanized Stenciled

GALV-283-2-144-L

Torsion Spring .283 x 2" x 12ft LH Galvanized White

Wire size: .283
Inside diameter: 2"
Length: 12 ft
Galvanized Stenciled

GALV-273-2-144-L

Torsion Spring .273 x 2" x 12ft LH Galvanized Orange/Red

Wire size: .273
Inside diameter: 2"
Length: 12 ft
Galvanized Stenciled

GALV-250-258-144-R

Torsion Spring .250 x 2-5/8" x 12ft RH Galvanized Green

Wire size: .250
Inside diameter: 2-5/8"
Length: 12 ft
Galvanized Stenciled

GALV-243-334-144-R

Torsion Spring .243 x 3-3/4" x 12ft RH Galvanized White/Yellow

Wire size: .243
Inside diameter: 3-3/4"
Length: 12 ft
Galvanized Stenciled

GALV-225-2-144-LH

Torsion Spring .225 x 2" x 12ft LH Galvanized Orange/Green

Wire size: .225
Inside diameter: 2"
Length: 12 ft
Galvanized

K23-3001

LiftMaster On/Off Switch 125/277VAC 20A

Also known as: G233001 233001 23-3001
For use with various LiftMaster® Commercial Gate Operators

K41-0157-000

LiftMaster Cable Tension Monitor Right Side

For use with various LiftMaster® MAXUM Series DC 700 lbs. to 2200 lbs. Standard-Duty and Extended-Duty Jackshaft Jackshaft Hoist and Trolley Commercial Door Operators
This service kit is compatible with the following MAXUM models: JDC JHDC and TDC.
NOTE: Refer to K41-0156-000 for Left-Side Cable Tension Monitor

BEA-10LIGHT-TBASE

BEA Modular LED Signal Base

To be used with the BEA-10LIGHT modules.

User Guide Datasheet

BEA-10LIGHT-TR

BEA Modular LED Signal Light Segment Red

Signal lights for industrial and vehicle flow management applications.
LED signal modular lights offer customizable configurations with “build-your-own” lighting elements that share a common base and bracket.
These LED signal units are available in red green yellow and an audible alarm cap and can be stacked in a tower configuration with up to six modules.
Operating temperature: -40 to 122F
Nema 4/IP65
Base sold separately

.......more details