Devanco Canada - Get The Right Garage Door Opener‎ and Parts

370-3343

Stanley Magnet Assembly for Quiet Glide

MA021

LiftMaster Nylon Arm Nuts 50/Pkg

For barrier gate models MADCBB MATDCBB MASDCBB & MASTDCBB

CONSD24V

Reversing Contactor Struthers Dunn 24V

Struthers-Dunn # A275KXX90

SPR41B60X1

Sprocket 41B60 for a 1" Shaft

MV-00026

Micanan 24V Commercial Receiver CR32-24V

Programming Instructions

UCF-1

Self-Aligning Cast Flange Bearing 1" Bore UCF205-16

Grey cast iron painted.
Comes with 2x set-screws 1/4-28
Square 4 bolt

RELAY021

Manaras Socket Base for Loop Detectors ZPD11

11-Pin base

TAC1

LiftMaster Single Line Telephone Access Control with Radio

The TAC1 can be connected to two devices such as a door or gate using the two independently controlled relays or wirelessly using Security+ technology standard or any combination of the two.
Provides wired communication and secure access control at the gate or door.
Measurements: 6" h x 8.75" w

Installation Manual Programming Instructions

SELWR433

Erone Wiegand Receiver 433 MHz

26 bit
12-24V AC/DC input voltage

Wireless System Chart

.283-2-R

Cut-to-Length Torsion Spring .283 x 2" Right Hand Wound White

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

.262-2-L

Cut-to-Length Torsion Spring .262 x 2" Left Hand Wound Red/Yellow

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

108135.0004

Overhead Serpentine V- Belt for JST 31"

Overhead Door commercial garage door opener serpentine belt 108135-0004
Type "J" 31"

21-3260-1

LiftMaster Transformer 50/60Hz 60va 120/208/240/480V

120/208/240/480V PRIMARY 24V SECONDARY

378LMC

LiftMaster Wireless Control Panel

Wireless control panel for 315 MHz Chamberlain openers
For use as a secondary wall control panel only
Mounting hardware and batteries included (CR2032)
Auxiliary button to open/close 2nd garage door

Programming Instructions Instructions de programmation

365LMC

LiftMaster Universal Plug-in Receiver 315 MHz

Compatible with any garage door opener with a simple 2-wire dry contact
Includes 2-conductor bell wire
Able to accept 8 Security+ transmitters & 1 digital keypad
Compatible remotes; 893MAX 890MAX 892LT 373LM 371LM 374UT 375UT

Programming Instructions Instructions de programmation

24-24-1

LiftMaster Relay 24VAC 8-Pin DPDT Flange

41DB002-2

LiftMaster Circuit Board Assembly *** To Extent of Inventory

Assembly includes: Circuit board end panel and light socket
For belt drive units with two lights such as 3850C
Same as 41A5685

24-24-6

Small Relay 24VAC 11-Pin 3 PDT

.343_3-3/4"-RH

Torsion Spring .343 x 3-3/4" x 12ft RH Blue/Red

Wire size: .343
Inside diameter: 3-3/4"
Length: 12 ft

.207_2-5/8"-RH

Torsion Spring .207 x 2-5/8" x 12ft RH Brown

Wire size: .207
Inside diameter: 2-5/8"
Length: 12 ft

877MAX

LiftMaster Sec+ 2.0 Keyless Entry with Universal compatibility (MAX) ***No Longer Available

Security+2.0™ rolling code technology assures a new code is sent every time the keypad is used
Temporary password option enables visitors or delivery and service personnel to enter the garage without giving them your personal code Completely wireless – powered by one 9-volt battery (included)
Weatherproof flip-up protective cover Backlit keypad makes numbers easy to see even in the dark
One-button-to-close feature makes it easier than ever to close your garage door (works with all LiftMaster® garage door openers manufactured since 2006)
Programs in 2 easy steps
Compatible with LiftMaster® Security+2.0™ garage door openers

.......more details

877MAX Manual

298601

Linear Wireless Multi-Code Keypad 310 MHz

Compatible with 310 MHz Stanley and Multi-Code receivers
4-digit access code
Backlit keys
Easy access to battery
Power: 9-volt battery
Codes: 1024 (set by dip switches)

.......more details

Installation Manual

1006-1-1/2-10'

Rigid Vinyl Bottom Retainer U-Shaped 10' Long

Black with flexible fin to touch door face.
For door thickness 1-1/2"

1003-1-3/8-24'

Aluminum Bottom Retainer L-Shaped

For 1-3/8" thick doors.
DIE # ES18009

T751L5

LiftMaster 3/4 HP 115/230V 1P Commercial Trolley Operator Logic 5 *** No Longer Available

Trolley low profile with brake
Suspended from the ceiling the operators are used on sectional overhead doors with standard lift.
T operators are directly attached to drive and control the door.
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.

Installation Manual Manuel d'Installation Sell sheet Brochure

.225-2-5/8-LH-C

Torsion Spring .225 x 2-5/8" x 144" LH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .225 ID: 2-5/8" Length: 12 ft

SPRAY-265

Aluminum Touch Up Spray Paint Antique Brown / Brun Antique #265/165 *** To Extent of Inventory

140g

111087.0001.S

Overhead Transformer 120/208/240V - 1 Phase

works on various Genie ops ie GCL-GH

CR-2149

Universal Photocells

Will work with all major brands of residential openers including: Chamberlain Liftmaster Craftsman Overhead Stanley Wayne Dalton Linear Raynor and Moore-O-Matic
The self programming feature allows you to simply hook up to the existing wiring
Suggested replacement for Stanley 49522 - must cut black wire

Installation Manual

DR4

Linear 4-Channel Delta3 Receiver 310 MHz *** To Extent of Inventory

Activates four devices or UP DOWN STOP for one commercial device
310 MHz 8 dip switch
Power: 24 VAC/VDC
Dimensions: 4.9" W x 4.2" H x 1.3" D
Same as DNR00023A or DR4V

Programming Instructions

MM00310

Micanan Sliding Door Carriage

Fits model GSD

41011

Doorlec Brake Release Cable

Used on GH

BGARM14

LiftMaster 14' Arm only for Techna Barrier Gate

For use on Techna gate operator

1-0242

RW Stay Roller 68 Nylon 2-1/2" Dia

Special Order item
Reverible and adjustable for doors 1-1/2" to 3" thick
Steel frame Zinc plated finish

07-8005

LiftMaster Crank Link Barrier Gate

Also known as: K07-8005 G078005
For use with various LiftMaster® Barrier Gate Operators

29140

Doorlec Transformer 230V pr 120V sec 50VA

230V primary 120V secondary 50VA

E14400M

Cable Tie KSPEC 40 LB Black 14" Nylon 1000/pkg

Length: 14" Width: 3.6MM (0.140")
Low insertion and pull through force
Advanced pawl and teeth design
Angled tail provides quicker initial insertion alignment
Tail finger grips allow easier handling and tightening
Rounded edges provide added safety and eliminate insulation damage

.......more details

LDJ-CAP-48MFD

Doorlec Run Capacitor for LDJ RCR50-370

370VAC/B 50 uf 50/60 Hz
CSC run capacitor

OMJ-6112-M-N1-RH

Manaras Medium-Duty Jackshaft Operator 1/2 HP 120V with Monitored Circuit Board N1 Eyes Right Hand

Designed for use on standard high and vertical lift sectional doors
Can also be used on small rolling doors and grills
Single phase intermittent-duty motor has instant reverse and internal automatic reset thermal overload protection
Mechanical brake
Floor level disconnect mechanism which must be engaged for manual push-up operation
14 cycles per hour 50 cycles per day

.......more details

BEA-10EARA

BEA Rain Hood for Eagle Artek Black

��Rain hood only

EXT-HDWR-BOX-7/8

Installation Box for Extension Springs for 7' & 8' Doors

Installation Hardware includes 3" sheaves sheave strap cables safety cable fasteners

CAPXSHOOD

LiftMaster Sun Hood for CAPXS Black

Sun Hood exclusively for installing with Model CAPXS – Smart Video Intercom S.
Provides simple protection for the CAPXS touchscreen for better visibility when mounted in locations with direct sunlight.
Fully compatible with the CAPXSTK Trim Kit accessory and CAPXSTK Trim Kit with Postal Lock for a clean aesthetic installation.
Dimensions: 6.15” x 4.13” x 4.74”

41832R.S

Genie Service Head 6070H/B 6170H/B

FOR REPLACEMENT OF JACKSHAFT OPERATOR SHAFT RELEASE OR MOTOR ASSEMBLIES
Head Service Kit for 6070H/6070HB and 6170H/6170HB
Special Order Price by Quote Only
This kit includes the complete motor but does not include the circuit boards transformer or cover for the 6070/6170 unit.

27025

Doorlec Electric Motor TEFC 1 HP 115/230V DC101C

RLC-K36

Miller Edge Light Curtain Non- Monitored 3ft NO/NC

Light curtain made up of a series of thru-beam photo eyes designed to provide a dense barrier of protection for motorized or high speed doors.
Ideal for environments that require expanded protection for protruding parts that may not be detected by standard single-beam photo eyes mounted 6" above the floor.
Ideal for pre-2010 installations not requiring a monitored solution.
Ability to span up to 32' wide
Universal mounting brackets included
IP67 waterproof housing

.......more details

ETBH-353-1

Doorlec 1 HP 575V-3Ph Trolley OP

MRIN

LiftMaster Base Riser Mount for industrial operators

Works with LiftMaster IHSL24UL and INSL24UL slide gate operators
Provides a base-mount option instead of post-mounting the operators

Installation manual Manuel d'installation Retrofit guide Guide d'installation

210-0057

TNR Doors CurtainLok Kit HDXL9 5/Kit (10 pcs) ** Price by Quote Only

Natural UHMW-PE 5 Lok's
Sold as a kit of (5) complete loks that require 2 curtain loks and 2 screw (10) of each piece for 5 loks

RESET-12A-32V

Doorlec Reset 12A 32V Overload

EHJ-321-1/2

Doorlec Industrial Jackshaft Op. 1/2 HP 230V-1Ph

Heavy-Duty Industrial Operator for Sectional or Rolling Steel Doors
DC-2000 logic with adjustable Timer To Close Delay On Reverse and Traffic Light Control
Solenoid Brake prevents coasting and secures the door when closed
TEFC (sealed) continuous-duty electric motor with overload protection
Automatic Friction Clutch protects the door and operator
Self-aligning Heavy Duty sealed Pillow Block bearings on all shafts for high cycle applications

.......more details

3SL-15R-HORIZ-12

Horizontal Track Set 3" SL 15" Radius 12'-0" Door (2 pcs)

Set of 2 horizontal tracks 13'-6" long 13g

12-12004

LiftMaster 1" Ball Bearing

For use with various LiftMaster® Heavy Industrial-Duty Commercial Door Operators
Drive shaft bearing used on RBH
Same as K12-12004

GAREX-PVC-W-18

Residential Side & Top PVC Weather-Strip with cap 18' Long (217") - White

White rigid retainer with white flexible vinyl.
Dual fin vinyl.
Comes with snap-on cap to hide screws.

LDCO863B

Linear DC Powered Garage Door Opener Accepts Both Belt or Chain Rail

Ultra-Smooth and Quiet Industry leading performance with variable speed operation soft start/stop and ultra quiet motor
Integrated Battery Backup Energy-Efficient LED Lighting Long life dimmable LED light panels included. Secure.
Responsive Remote Control Linear MegaCode remote controls operate over long range and employ high-security technology
Release the operator’s quick-disconnect trolley to open or close the garage door manually
Self-Diagnostic System: Confirms proper operation and alerts users both audibly and flashing the lights. In the event of a problem it pinpoints the trouble and alerts users by flashing the courtesy lights
Linear ® Smart App Advanced real-time monitoring and control of garage doors from any mobile device. * Assign custom access and permissions for up to 10 authorized users and schedule door and light operation.*Wi-Fi and internet connection required

.......more details

Remote compatibility chart

02-406-1T

LiftMaster Replacement Switch Key 1 only

Replacement Switch Key.
For use with various LiftMaster® Commercial Door Operators

122930

Marantec Synergy LC Light Duty Comm. Trolley Opener 315 MHz Head Only

HomeLink compatible
For installation on sectional doors only
Precision Controlled DC Motor Complete with Automatic Soft Start and Soft Stop Feature
Higher Motor Operating Speed: Provides faster open and close cycles
Timer-To-Close: Provides automatic door closure
Convenient Status Display: To indicate the status of your door operator at any time

.......more details

RESET005

Manaras Resettable Overload Fuse 8A 1 Phase

LMPK3-ST

LiftMaster HID ProxKey III 1346 Key Fob Price Per Fob

HID 26 Bit Format
125 kHz
Sold in Lots of 100 - Price Shown is Price per Card
Small enough to fit on a key ring
Universal compatibility with HID proximity card readers
Provides an external number for easy identification and control

.......more details

10TD900INDHH3

BEA 3-Button Digital Transmitter Nema 4 900 MHz

Compact transmitter allowing wireless activation of any door control providing greater line-of-sight distance than legacy wireless frequencies.
It also provides better penetration of obstacles.
IP65
Operating temperature: -10 to 55C
Controls one 10RD900 receiver

Product guide

.192_2-3/16_60R

Spring Wire .192 x 2.188 x 60" CTD RAW RH

.192 x 2-3/16" x 12'

30-94225

Truck Door Bottom Panel w/ Seal & Retainer (15" x 98") Steel Clad White Enamel Finish

1/2" thick (13mm) composite panel consisting of a high density polyethylene (HDPE) core between two galvanized steel skins
Baked on white enamel finish
Black E-coat/powder coat spring assisted steel lock eliminates door bounce
One-piece extruded rubber head seal
Tongue and groove joints
Stainless steel rivets/black e-coat/powder coated components

.......more details

100144

Linear Brake Shoe w/Lining

For commercial door operator

230404

Linear Motor Control Board 5 Relay (w/Brake)

For commercial door operator

ETH-A

Doorlec Trolley Type Apartment Op. 1/2 HP 120V Head Only

This operator can be wire to receive radio and photo electric control systems loop detectors etc..
Headroom Required: 2" minimum at doors highest arc of travel

VMD202-50

EMX Vehicle Motion Detector Probe with 50ft Lead Wire

The VMD202 Vehicle Motion Detector is the most advanced single-piece vehicle motion sensor on the market today.
The probe and its electronics are housed in a slim design that is buried next to a driveway.
The VMD202-R Sensitivity Remote Control (sold separately) makes installation and fine tuning simple
Probe assembly and wire are water tight and direct burial compatible
Harness is pre-wired onto lead wire for easy installation
Settings are placed in a non-volatile memory in case of power failure

.......more details

120BH

12" Heavy Brush Insert 6ft Long

Polypropylene bristles

E/BLOP/276

Automatic Systems Audible Alarm for BL229

SPRAY-431

Aluminum Touch Up Spray Paint 350g Bright White / Blanc Pur #431

350g
Replaces Gentek #801

.235-3.25-11.5-LHW

Mini Storage Spring .235 x 3.25" x 11.5" long Left Hand

.319-6-L-C

Cut-to-Length Torsion Spring .319 x 6" Left Hand Wound Coated ** Price by Quote Only

Priced per inch. Cones sold separatly.
For factory installed cones order part # C-600-Installed

.262-134-R-C

Cut-to-Length Torsion Spring .262 x 1-3/4" Right Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-134-INSTALLED

.250-134-R-C

Cut-to-Length Torsion Spring .250 x 1-3/4" Right Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-134-INSTALLED

.243-258-L-C

Cut-to-Length Torsion Spring .243 x 2-5/8" Left Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

.243-134-L-C

Cut-to-Length Torsion Spring .243 x 1-3/4" Left Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-134-INSTALLED

.218-2-L-C

Cut-to-Length Torsion Spring .218 x 2" Left Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

.218-134-L-C

Cut-to-Length Torsion Spring .218 x 1-3/4" Left Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-134-INSTALLED

821LMB-SENSOR

LiftMaster Extra Door Sensor for 821LMB Second Generation *** To Extent Of Inventory

This add-on door sensor works with the MyQ Smart Garage Hub to monitor and control a second garage door opener.
This version of the MyQ door sensor is only compatible with the new MyQ Smart Garage Hub by LiftMaster Model 821LMB.
Installation and Programming is easy: Mount to inside top panel of garage door and add to an existing MyQ account through the MyQ app
Not compatible with MyQ Garage (821LM)

.295-6-L

Cut-to-Length Torsion Spring .295 x 6" Left Hand Wound Blue

Priced per inch
For factory installed cones priced seperately - use part no. C-600-INSTALLED

.375-334-R

Cut-to-Length Torsion Spring .375 x3-3/4" Right Hand Wound Yellow/Green

Priced per inch - cones sold seperately
For factory installed cones use part no. C-375-INSTALLED

PRO-APTB-5043-U

Micanan 1/2HP 460V 3P Apartment Trolley Operator With Brake N1 Eyes Monitored ECB

Low clearance design for APT applications (9.5")
Door speed: 12" per second
Monitored board
On-Board receiver holds up to 20 transmitters

HSLG-221

Linear Commercial Slide Gate Operator 1/2 HP 230V 1 Ph - Heater not Included

Max gate size: 35 ft 1000 lbs
Max duty cycle: Continuous
Integral APeX Controller
Double V-belt to chain reduction
#40 roller chain
Emergency manual disconnect handle

.......more details

BL229-EX1929/G45

Automatic Systems Rising Barrier Gate with 14'9" Round Arm Left Hand

DOCK-SEAL

Special Order Dock Seal Price by Quote Only

Made to order Models R-100 R-600 & R-700
Standard Seals include two side pads with a fixed head pad and option for an adjustable head curtain.
40 Oz Vinyl
Comes with full height yellow guide strips and option for wear flaps
Black Blue and Green are stock colors for other colors there will be a surcharge as well as longer production time
Custom Logo available

.......more details

R-100 order form R-600 order form R-700 order form Catalogue

37348R

Genie Closed Confirm Remote 915 MHz GLR-BX ** NLA

Beeps and flashes green when garage door closes.
Gives warning tone and flashes red when garage door does not close properly
Compatible with Models 4064 3064 4024 and 3024 only.
Works with Genie TriloG™ IntelliG® as well as Revolution Series models PowerMax® SilentMax® and ChainMax™ garage door openers
Requires a Genie Network Adapter
Sleek and compact design

.......more details

Programming instructions Instructions de programmation

PROBE-150

EMX CARSENSE-101 Direct Burial Probe with 150' Lead Wire

Wand only
Requires CS101 (Carsense-101)

30257T

Genie Coupler Screw Drive Units

Used for attaching the screw of Genie screw drive rail to the motor head.
This coupler is made to break away if the door hits a hard obstruction thereby protecting the motor.
If the motor of the screw drive Genie runs but the screw is not turning this coupler needs replaced.
To check and replace that part remove the two screws holding the rail to the main power head
Mounts on rear of opener rail and fits in motor head.

029-98205

W-Style Replacement Door White Stainless Steel Package 029-98205

Replacement door size between 98" wide x 105" high
Painted white
Stainless steel package

020C98290

W-Style PolyTrak Complete Replacement Door White Stainless Steel Pkg 020C98290

Complete replacement door is fully assembled maunfactured to exact size includes tracks operator assembly and side seals
Engineered polymer roll-up door
Galvanized steel reinforcement channels
Unaffected by heat and cold: -92F and +158F (-69C to 70C)
Panels never need painting color is molded in
White is standard but available in grey yellow or red.

.......more details

.283-334-R

Cut-to-Length Torsion Spring .283 x 3-3/4" Right Hand Wound White

Priced per inch
For factory installed cones priced seperately - use part no. C-375-INSTALLED

25-10109

Truck Door 1" Steel Roller 5" Shaft Length for Todco Roll-Up Doors ** NLA

Zinc plated Hardened shaft and raceways
Seven roller ball design

50195

Doorlec Front Idler Assembly with Shaft 41B9 Oilite Trolley Models

Fits all Doorlec commercial trolley operators
Same as # 50190

785105

FAAC XP30 Photocells 30m Range Relay 785163

Hardwired pair of Photocell relays
30m Range
IP54
24v
Dimensions: 55 L x 78 H x21 D mm

K1D8389-1CC

LiftMaster Main Board DC Pad Mount for UL325

This replacement board is compatible with the following models: CSW24U CSL24U RSW12U and RSL12U
Also compatible with HCTDCU and HCTDCUL Overhead Gate Operator
Same as 001D9039-1CC