Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home Your Search Transmitters
PRO-TB-5011-E

Micanan 1/2HP 115V 1P Trolley Operator with Brake NM ECB No Eyes

  • Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
  • #410 roller chain on 1/2 HP models
  • Non-Monitored board NO photocells
  • On-Board receiver holds up to 20 Transmitters
K74-18379

LiftMaster Hall Effect Sensor for SL575 SL585

  • Hall effect assembly for SL540/570/580/575/585 operators with GL Board
  • Includes: screws flat washers lock washers and replacement instructions
  • Same as: G74G0487
  • This part has a short lead-in wire and will not work with SL590 or SL595
ALUM-431

Aluminum 24" x 100' Spool Bright White / Blanc Pur # 431

  • 20% thicker than the aluminum sold in retail stores (0.022" )
  • Aluminum on the reverse side
  • Gentek # 431
Colour chart
C-24X12-134-W

Thermal Window 24" x 12" for 1-3/4" Cedo Door White

  • For 1-3/4" thick door
IRB-MON-RX

EMX Monitored Receiver Board Only

  • Receiver board only for IRB-MON
720118

FAAC Latching Plastic Enclosure

  • Dimensions: 4.65" x 8.38" x 0.6"
37314

Doorlec Relay Mini 120V

  • For overrun pre-wired 25 Amp
K72-13058

LiftMaster Intermediate Shaft Kit APT

  • Kit contains: Shaft Bearings Roll Pins Washers and Sprockets (41B10 x 3/4" & 41B16 x 3/4")
3BXLT

Control Station Exterior Surface Mount O/C/S N4 with Lockout Non-Metallic

  • Double pole contacts
  • Stations are randomly shipped with key numbers betwwen K001-K005 unless a specific key number is specified
  • Comes with 2 keys
  • H=7" W=2-3/4" D=2-3/4"
3BXT
POCKETWHEEL007

Manaras Pocketwheel Assembly with rollers and clips (Hoist-A-Matic)

  • Includes POCKETWHEEL005 CAM012 and CLIP020
71-90TS

LiftMaster Timer Kit for TS Wiring

  • Field mod. kit
PMR10RGT

Carlo Gavazzi Retro-Reflective Sensor

  • PMR series sensors have a sensing range up to 32.81 feet and a fixed sensitivity.
  • Immune to ambient light Selectable output function.
  • The plastic housing is IP 67 rated and allows cable or screw terminal connections.
  • Optional timing features include: Delay on operate delay on release or one shot (triggered on leading or trailing edge).
  • 24-240 VAC or 12~240 VDC
  • 5 Wire
    • .......more details
5735.96

Whiting Bottom Seal Grey 96"

  • For Dry Freight and Truss Doors
WASHER008

Manaras Type A Plain Washer 5/16" Zinc Plated

  • Used on old MJH
ALUM-801

Aluminum 24" x 100' Spool White / Blanc # 801

  • 20% thicker than the aluminum sold in retail stores (0.022" )
  • Aluminum on the reverse side
  • Gentek # 801
Colour chart
CPS3CARD

LiftMaster Option Card Only (41K0811)

  • Works with all commercial Logic versions L2 L3 L4 L5
  • Use with CPS-U to add a second set of eyes to the operator
  • Allows activation of Timer-To-Close without CPS-U
  • Simply plugs into Logic board
  • Cut resistors on JU1 & R16 to activate timer feature
  • Same as 041K0811
    • .......more details
39142R

Genie Aladdin Connect

  • Aladdin Connect™ controls and monitors your garage door opener with your smartphone
  • Compatible with smartphone iPad(R) & tablet devices
  • Easy installation & setup
  • Operates up to 3 doors with 1 system
  • Able to program timed closed functions
  • Wi-Fi communication Retro-fit capable Works with all brands
    • .......more details
Quick set-up guideGuide d'installation rapide
OSH-6213-ECB-LH

Manaras Opera-SH 3/4 HP 240V 1Ph with Electronic Circuit Board Left Hand *** To Extent of Inventory

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
    • .......more details
Installation manualSell sheet
K75-34790

LiftMaster Disconnect Kit for SL585

  • Kit includes: Release lever bracket cable compression spring washer screws clevis pin bushings roll pin bolts nuts & handle
Installation Manual
22-460

Brake Solenoid 440-460V

  • Used on all brands of commercial door and gate operators
  • same as MK-00028
17-10336

LiftMaster Pulley 7.000"OD 3/4" Bore 4L-Belt

MK00488-NM

Micanan Electronic Circuit Board Non-Monitored

  • Replacement board for PRO-LH (50-11)
  • Board does NOT have terminals P1 & P2
  • Up to 20 transmitters can be programmed
Instructions Manual
LA400DC

LiftMaster Primary Actuator Arm for Single Gate Applications 12VDC New Version

  • New version has red stripe but will still work on the old LA400
Installation ManualManuel d'InstallationSell Sheet
K001A6039

LiftMaster Control Board for LA400

  • Replaces P/N 127A0071C PN 127A0071F
Installation Manual
27-48-300

Extension Spring 8' Door - 300 lbs Tan

  • Single - Loop
  • 27" long 48" stretch 300 lb load
  • Sold individually
  • Rated for 10000 cycles
Spec Sheet
27-48-130

Extension Spring 8' Door - 130 lbs Yellow

  • Single - Loop
  • 27" long 48" stretch 130 lb load
  • Sold individually
  • Rated for 10000 cycles
Spec Sheet
41DS002-2

LiftMaster Electronic Circuit Board Screw Drive Models 3840 *Discontinued*

  • Logic Control Board 315 MHz
  • Compatible with 3840 Screw Drive Purple Learn Button
1224-1-3/4"-WHT

Elton Commercial Window for Flush Doors 1-3/4" thick 1224 White Frame Sealed Glass

  • Screw together window kit
  • Thermal window
  • Frame size: 25-1/8" x 13-1/8"
  • Cut-out size: 24-1/16" x 12"
  • Vision area: 21-11/16" x 9-5/8"
  • Different glass options and frame colours are available upon request
    • .......more details
21-10340

Transformer 115-24V AC 20VA

  • 120V Primary 24V Secondary 20VA
14JW

Rolling Steel 3" Flat Cast Endlock

  • Endlocks are riveted to curtain slats ends of every other slat to prevent slats from shifting laterally and to prevent curtain wear in guides.
  • Continuous endlocks are both ends of every slat.
  • Rivets included with endlocks
AC9

Felco C9 Cable Cutter 1/4" Capacity

  • Tool length: 13"
  • Gives a clean cut without crushing thanks to the triangular cutting system.
  • Blades and centre bolt in high-quality hardened steel for exceptional performance.
  • Thumb catch designed for one-handed operation.
  • Pressed steel handles with non-slip grips
  • Maximum cutting diameter: 9mm / 0.35in
    • .......more details
Data sheet
BK101/PR

Spring Anchor Bracket USA 8-Gauge sold as a pair

  • Universal spring anchor brackets - Residential/Commercial
  • Centerline adjustment: 3-5/16" to 6-3/4"
  • Bright zinc plated 8 gauge steel
  • No bearing
  • Bearing R5110 sold separately
BOARD066R

Manaras Replacement Power Board ***No Longer Available

  • Used on all Manaras circuit board type operators
Installation ManualManuel d'installationReplacement ChartGuide de remplacement
CS202S-5-100

EMX Car Sense Vehicle Motion Detector ** Discontinued Offer VMD202 instead

  • Low voltage used for automatically opening gate when exiting property without requiring the use of a remote control transmitter key pad or any other operator control device.
  • Can be located up to 150' from the gate. Senses automobiles on a driveway up to 12' wide moving more than 5 m.p.h.
  • A second probe can be connected in parallel for additional coverage or for automatic opening in or out.
  • Available in a five wire (recommended for use with GTO operators) and a three wire version.
  • The CarSense 202 is buried in the ground so it will not be noticed by a potential intruder or vandals.
  • The CarSense 202 accepts a wide range of power input of 9 - 41 VDC and 6-29 VAC. The low current consumption of 250uA and 12mA detected make the CarSense 202 Slim a great choice for solar applications
    • .......more details
Installation ManualSell Sheet
Q300

LiftMaster Traveler Carriage for Miracle-One**Discontinued

  • Replacement traveler carriage for Liftmaster Elite Miracle-1 model
  • Same as part no. K75-50341
BK306

Jamb bracket J-06 #6 12 gauge

  • Sold by the piece
  • Height 3.50" Length 1.9" Width 2.45"
  • Bright zinc plated 12 gauge steel
  • 2" long track mounting slot
  • manufactured to accept ¼” fasteners when attaching to the track and 5/16” to lag to the wall.
MODKIT065B

Manaras Trolley Hoist #41 Brake Release Kit Includes 12' Shaft

  • Modification kit for in-field upgrades
21002

Doorlec Hoist Interlock Switch

LA500HDTKITSTD

LiftMaster Torroid Transformer Kit

  • Powers gate from AC power-120V or 220V single phase.
  • Ideal for applications that prefer AC transformer run operator vs. battery run operator
  • Ideal for areas that experience temperatures below -4 F for extended periods
370-3343

Stanley Magnet Assembly for Quiet Glide

K72-12506

LiftMaster Clutch Shaft Kit (1/3 & 1/2HP)

  • For 1/3 and 1/2 HP models - L5
RPEN4-RFLCTR

LiftMaster Reflector with Support Housing

  • Replacement reflector for the CPS-RPEN4 photo-eyes
423LMC

LiftMaster 3-Channel Co-Axial Receiver 390 MHz

  • 8" coaxial antenna included
  • Used for open/stop/close on commercial motors
  • N/O and N/C selectable
  • Compatible remote: 33LM
Installation ManualManuel d'Installation
EL25G

LiftMaster Telephone Entry System Gray

  • Capable of accepting up to 2000 codes
  • 4 assignable and programmable built-in relays
  • Mounting versatility and available in 3 colors: Gray Nickel or Silver
Installation ManualSell Sheet
TAC1

LiftMaster Single Line Telephone Access Control with Radio

  • The TAC1 can be connected to two devices such as a door or gate using the two independently controlled relays or wirelessly using Security+ technology standard or any combination of the two.
  • Provides wired communication and secure access control at the gate or door.
  • Measurements: 6" h x 8.75" w
Installation ManualProgramming Instructions
OES-SD16

LiftMaster Optical Edge System 16ft

  • Sectional door edge kit 16ft (4.9M)
Installation ManualManuel d'InstallationSell Sheet
7470.093

Whiting Side Seal for Insulated Doors 93" Long

  • Fits Coldsaver and Tempguard
1005-1-3/4-10

Aluminum Bottom Retainer U-Shaped

  • For door thickness 1-3/4"
195LM

LiftMaster Ceiling Mount ***Discontinued***

  • Designed to fit most standard garages
  • Black powder-coated finish hides wires and cords for a cleaner look
  • Mounts parallel or perpendicular to rail
  • Adjustable height to fit most ceilings
  • Hangs 6.5 to 24 inches down from ceiling
Installation ManualManuel d'InstallationSell SheetBrochure
.250-2-L

Cut-to-Length Torsion Spring .250 x 2" Left Hand Wound Green

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
CPS-N4

LiftMaster Nema 4 Commercial Protector System Photo-Eyes with Interface box

  • Commercial Through Beam Photo Eyes includes:
  • 50-15514 I/R Emmitter
  • 50-15515 I/R Detector
  • 77-16011 Hardware Kit N4-CPS
  • 001C4629 CPI Housing Assembly
  • Receiving Eye - A: 50-50997 Sending Eye - A: 50-50998
    • .......more details
Installation ManualManuel d'installation
108135.0004

Overhead Serpentine V- Belt for JST 31"

  • Overhead Door commercial garage door opener serpentine belt 108135-0004
  • Type "J" 31"
41A5021-1ATS

LiftMaster Circuit Board Assembly (41A5021-1HATS)

  • Board: Security+ 390 MHz
  • Assembly includes: circuit board and end panel
  • Also includes: 1 Multi-Function wall ctrl panel - 2 wire
  • For: ATS211 & ATS211R
  • For newer model ATS use replacement board 41A5021-9G-315
  • Same as 041A5021-1HATS
    • .......more details
20-2LMC

LiftMaster 2-Strand Bell Wire 500ft White/Red

  • 2 strand 22 gauge tin-dipped copper hook-up wire
  • Color coded White & White/Red wires
312HMC

LiftMaster Universal Coaxial Receiver Sec+ 315 MHz

  • External 8" coaxial antenna included
  • Security+ rolling code technology and/or Dip switch compatibility
  • 12 VDC or 18-35 VAC/DC jumper selectable
  • Momentary or constant contact selectable
  • For replacement antenna use 41C3196
  • Accepts up to 31 remote control codes on Normal Security setting
    • .......more details
Programming InstructionsInstructions de programmation
TUBE_SHAFT_10FT

Hollow Shaft 1" x 10'-10" Galvanized 16 gauge

  • When ordering order one foot longer that actual door width
41A6095

LiftMaster Electric Motor and Bracket for 3800 / 8500

  • For models: 3800 3800P & 3800PLD
  • Also known as 002D1622
03-8024-K

Reversing Contactor 3-Pole

  • Reversing contactor with 24 VOLT coil
  • Dimensions: 3.5" long x 2.25" wide x 2.25" high
  • Telemecanique part # LC 2K09 107B7
41A4916

Gel Wire Connectors 19 to 26 AWG 100/ box

21-14182

LiftMaster Transformer 120-240V 24VAC 20VA

  • 120/240V Primary 24V Secondary 20VA 50/60 Hz
  • Same as K21-14182 used on L5 commercial operators
17300

Doorlec DC-3000T3 3-btn Transmitter 313 MHz

  • One block of 10 dip-switches for programming
  • Will activate 3 Doorlec 17307 receivers (DC-3000R)
  • Includes visor clip and 9V battery
Programming Instructions
MJ00005

Micanan Clutch Pad 3/4" ID

  • Used on all Micanan commercial operators & PRO-GO gate operator
  • 3/4" inside diameter 4" outside diameter
CP-SW-MIC

Lynx Limit Switch for Commercial Operator with Logic Board

  • Single limit with curved actuator lever
  • Switch attaches directly to the Logic 6000 board
LIMIT015

Manaras Single Limit Switch without Lever

  • No action limit switch - Cherry
  • Used on Manaras operators built from 2002 to Feb. 2009
  • Also used as disconnect switch on Opera models
Limit Switch Chart
BRAKE011

Manaras Band Brake Assembly Kit

  • Does not include solenoid
  • Replacement brake kit for operators that are belt driven and have a brake. Works with OSH OTBH
  • Will not work with Gear-Head operators
Installation Manual
STATION078

Manaras 3-btn Push-Button Control Station Nema 4/12

  • 2 N/O contacts and 1 N/C contact for stop.
  • Surface mount.
Sell sheet
2704.162_180

Whiting Roadside Torsion Spring for Cube Truck Roll-Up Doors 18" Long Galvanized

  • Most common torsion spring for cube trucks
  • Specs: .162 x 2-3/16" x 18" Long
  • For Curbside order part # 2705.162*180
831-R

Allstar 1-Door O/C/S Receiver 107480 318 MHz ** To Extent of Inventory

  • Three channels - three relay outputs
  • Textured aluminum case
  • Terminal strip for wiring
  • Wire whip antenna with "F" connector
  • Compatible with Allstar Classic Allister and Pulsar dipswitch transmitters and MVP quik-code transmitters
  • Power: 24 VAC
    • .......more details
Programming Instructions - Dip Switch VersionProgramming Instructions - Learn Button Version
DT2A

Linear 2-btn Delta3 Transmitter 310 MHz (DNT00017A)

  • Activates two Delta-3 receivers independently
  • Test/operate LED
  • Visor mounting clip supplied
  • Power: 9-volt battery
  • Codes: 256 (set by dip switches)
  • RF frequency: 310 MHz
    • .......more details
Programming Instructions
HAE00023

Linear 7ft Belt & Inner Slide Assembly (HBT7)

HAE00040

Linear Control Logic/Receiver Board

  • Replaces HAE00039
  • Control board for LSO LDO LCO models
1104-8FT-BLACK

Residential Side & Top PVC Weather-Strip with cap 8' Long - Black (B)

  • Black rigid vinyl retainer with black flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
1104-9FT-DK-BRN

Residential Side & Top PVC Weather-Strip with cap 9' Long - Commercial Brown (DN)

  • Commercial brown rigid vinyl retainer with commercial brown flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
27-20500

Truck Door Bearing and Bracket Plate Assembly for Roll-Up Doors

  • Zinc plated finish
  • Bearing with 1" bore pressed in a football style flanged retainer
  • Factory installation assures proper bearing alignment
  • Cross reference: T #51038 W #4033 320000
SF200

Spring Fitting 2" Pair

  • Unviversal thread for use in either LH or RH wound springs.
  • Pair includes: (1) winding and (1) stationary.
  • Maximum wire size diameter: .3065".
  • Set screw installed: 3/8"-16 x 1" (2).
  • Mounting: 1" tube or solid shaft
  • Winding bar hole 1/2"
    • .......more details
CBC316

Thimble 3/16" - 100 per pkg

RS1037

Roller 3" Steel 7" stem 10 ball

  • Steel Roller Wheel diameter: 3"
  • Working length: 6.5"
  • Overall length: 7.75"
  • Box qty: 60 Box weight: 34.2 lbs (3-7-10 Steel)
1104-8FT-WHITE

Residential Side & Top PVC Weather-Strip with cap 8' Long - White (W)

  • White rigid retainer with white flexible vinyl.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
.375-334-R

Cut-to-Length Torsion Spring .375 x3-3/4" Right Hand Wound Yellow/Green

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-375-INSTALLED
PHOTO-061

Manaras Monitored Photoelectric Cells N4X (Fraba)

  • Monitored NEMA 4X enclosure through-beam type photocell
  • 4-Wire
  • Suited for industrial environments
  • Range: 45 ft
  • Supplied with 3ft of wire
Installation Manual
YSG115-LED

Devanco Stop and Go Light Yellow Housing 115V LED

  • LED Traffic Light Red/Green Dock Light
  • Weather-proof 2 piece housing with highest available UV rating
  • Ultra bright LED's for easy viewing in direct sunlight
  • Lenses measure nearly 4" in diameter
  • Requires 4 wall mounting screws 1/4" or 5/16" thread - not supplied
  • Made in Canada
    • .......more details
Installation InstructionsInstructions d'installationSell Sheet
EP2983

Exhaust Port 4" non latching long barrel *** Indefinate Delivery

  • Inside diameter: 4"
  • Outide diameter: 4-3/8"
  • Sleeve: 2" (non latching)
  • Flange: 6"
  • Includes fasteners & gaskets.
  • Polished aluminum finish.
    • .......more details
302850

Linear 2-Channel Multi-Code 12-24V Gate Receiver 300 MHz / 310 MHz

  • The Model 302850 is a dual frequency receiver. An internal jumper selects either 300 MHz or 310 MHz operating frequency.
  • The 300 MHz frequency is compatible with standard Multi-Code transmitters
  • The 310 MHz frequency is compatible with the Stanley version Multi-Code transmitters.
  • Operates on 12-24 volts AC or DC power
  • Two channels
  • Whip antenna
    • .......more details
Programming Instructions
110554

Allstar MVP 1-Door O/C/S Receiver 318 MHz ***Replaced by P-831RE

  • Three channels - three relay outputs
  • 8-wire operator connection
  • Wire whip antenna with "F" connector
  • Compatible with Allstar Classic Allister and Pulsar dipswitch transmitters and MVP quik-code transmitters
  • Power: 24 VAC/VDC
  • Codes: 19683
    • .......more details
Programming Instructions
GALEOR

Erone Metal Wireless Backlit Keypad 433 MHz

  • Blue backlit compact metal radio keypad
  • Wireless RF keypad polished heavy duty zamak@ cast alloy
  • Surface mount with Torx@ screws partially sealed with epoxy.
  • 22 User codes 4 or 5 digits 1 Master code 5 digits.
  • Audible and visual feedback
  • Frequency : 433.92 MHZ
    • .......more details
Wireless System Chart
20113R

Genie Limit Switch Screw Drive

  • For use on Genie screw-drive openers.
  • Compatible with ALL Genie Screw and Trac Drive garage door openers with standard rail assemblies
  • Replaces either the UP or the DOWN limit switch
  • Replaces Genie Genius Trac Drive limit switch models 19795S and 22785R
  • Not compatible with excelerator models
LB1212-18

Laminated Bumper Standard Black 12" L x 18" W 12" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
7-6028

RW Bottom Cane Bolt 524 x 3

  • ormed steel bar. Formed heavy steel. Black enamel 1" Dia. x 25" Lg.
OSHW-6533-0M00

Manaras Opera-SH w/Carwash Mod 3/4HP 575V 3Ph Mon ECB w/N4 Photoeyes Right Hand

  • A heavy-duty V-belt drive industrial jackshaft operator with Damp Area Modification
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • Solenoid activated Brake
    • .......more details
CAPXLV2MC

LiftMaster Smart Video Intercom - L

  • Designed for High-Rise Buildings and Gated Communities
  • For 50 to 50000 units multi-family buildings and garden style communities.
  • Perfect for any entrance and beyond with 4 Wiegand Input 4 OSDP Readers and 8 Relay Output to control doors gates or any other relay-controlled electrical system.
  • 10” HD touchscreen display fits in a surface flush or pedestal mount.
  • Wi-Fi** or ethernet for easier installation and connection to Cloud. 3rd party cellular modem can be used as well.
  • Wireless link to LiftMaster gate operators to eliminate the need for digging trenches at the gate.
    • .......more details
HTR120NC

LiftMaster Heater Kit for Maxum

  • Allows for operation in extreme cold environments effective for ambient temperatures down to -31°F (-35°C)
  • 120volt input power. standard 120V outlet required
  • Can be added easily in the field
  • Not for damp/wet environments
487132

Bircher Easy Loop D Vehicle Detection Microwave Motion Sensor ***TEST LOOP ONLY

  • Complementing loops with versatility for all applications
  • No need of ground loops - no construction work
  • Advanced 79 GHz radar technology with static object detection
  • Reliable activation presence and anti collision
  • Quick to install easy to configure via appy
  • Operating voltage: 9-24V DC
    • .......more details
210-0202

Hormann/TNR Guide Bottom Lead In Hardware Kit LH/RH

BGARM14LED

LiftMaster TECHNA Barrier Gate Arm only 14ft with LED

  • Ships in manageable 6-foot sections for streamlined transport and storage enabling easy on-site assembly
  • Strong aluminum extrusion with reenforced male/female joining sections and fasteners for a secure fit
  • The arm features a bottom channel designed to hold BGARMFOAM thereby minimizing the chance of scratching the vehicle.
  • Compatible with the S50L a wireless edge safety device.
  • IP68 rated waterproof LED lights
  • Operating temperature: -25C - +60 C
    • .......more details
Installation ManualManual d'installation
LVB420-11SF/P2

Steel-Faced Laminated Bumper Black 4" Projection Vertical Installation 20" x 11" Sold Individually Style P2

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required.
  • 5/8" anchor bolts mounted through pre-drilled holes into dock or can be welded to curb angle.
  • Steel face is 3/8" thick heavy duty high carbon steel that is mounted over a laminated dock bumper.
  • Plate to be welded to 2 or 3 steel support brackets which are to extend back to the 3/4" supporting rods.
  • Brackets to be punched with elongated holes to allow steel face to "float" upon impact.
    • .......more details
2500-1495

Linear Pushbutton Stop/Reset

LEDSTRIP004

LED Light Strip (1 Unit) Red/Green/Blue 96" 24VDC

  • An auxiliary output module is required enables connection of 24VDC LED light strips. MODKIT168A is an option
Installation Manual
GALV-319-258-L

Cut-to-Length Torsion Spring .319 x 2-5/8" Left Hand Wound Galvanized Blue/Green

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
  • Galvanized
BEA-10BODYGUARD-T

BEA Automatic Overhead Pedestrian Swing Door Sensor

  • Designed to provide threshold protection during the open state
  • Prevents a closed door from opening and an open door from closing when a person is in the detection zone.
  • Adjustments can be made with the BEA remote.
  • Installation height: 9' max (6'6" to 8' recommended)
  • Operating temperature: -22 F to 140F
  • Immune to electrical and radio frequency interference
    • .......more details
Installation Manual Manuel d-Installation
MWTA12B

Miller Edge Transmitter with Low Battery Alarm Small

  • The transmitter comes standard with a NEMA 4 weather-proof enclosure
  • Compact design that allow for easy troubleshooting.
  • The transmitter has an audible alarm that activates when the battery has 25% of its life remaining
  • Easy to configure · Non-monitored system ideal for operators manufactured prior to: · Doors: August 2010 · Gates: January 2016 · NEMA 4 transmitter built to endure rugged environments
  • Power Source: (2) 1.5 volts AA lithium batteries
  • Input: 2-wire N.O. sensing edge
    • .......more details
Installation manualSpec sheet