Devanco Canada - Get The Right Garage Door Opener‎ and Parts

D111904

Mitto B RCB02 2-Channel Transmitter

Compatible with Lux 2B gate operator

MK00785-RATED

Explosion Proof Killark Labeled 3-Btn Pushbutton Control Station

CSA and UL labeled station
Three button O/C/S Nema-7/9
Surface mount

1104-7FT-GREY

Residential Side & Top PVC Weather-Strip with cap 7' Long - Grey (G)

Grey rigid vinyl retainer with grey flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

1104-16FT-GREY

Residential Side & Top PVC Weather-Strip with cap 16' Long - Grey (G)

Grey rigid vinyl retainer with grey flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

CPS-RN4

LiftMaster Retro-Reflective Commercial Protector System with Nema 4 Enclosure ** DISCONTINUED

Utilizes a sending/receiving retro-reflective photo-eye and a specially designed polarized reflector that increases obstruction detection reliability
Polarized photo-eye design for a safe retro-reflective photo-eye system
Designed as a normal open circuit but not a self-monitoring system (does not incorporate industrial code technology)
Range up to 30 ft - indoor use only
24VAC operation
Color: Yellow

.......more details

Installation Manual

K74-34582-1

LiftMaster Plastic E-Box Assembly for LA500CONT

Plastic replacement box only

41A6104

LiftMaster Cable Tension Monitor

Used on jackshaft model residential garage door openers

LA500-SLR-PKG

LiftMaster Solar Package for LA500 Gate Operator

Solar package includes: 2 - 33AH batteries 2 - solar panels (SOLPNL20W12V) battery harness (LA500SLRHARN) and the battery tray (K10-36183).
Must be used with the LA500-1PKG-XLM
Solar option NOT compatible with LiftMaster Internet Gateway
Solar option not recommended in certain areas - please call before ordering

Installation manual Manuel d'installation Sell sheet Brochure

K72-19979

LiftMaster Clutch Shaft Kit 2005 +

Assembly includes: Clutch shaft keyed flange bearing dual sprocket 32/14 14-tooth sprocket E-ring compression sprocket chain wheel assembly pulley assembly chain guide assembly shim & thrust washers copper bushing 12-10882 and roll pins

71-REDGRN-HCT

LiftMaster Red/Green Warning Light Box **DISCONTINUED

Signals if door is moving or stationary
Compatible with model HCT

Installation Manual

71-65WTC

LiftMaster Weatherproof Case

Optional weatherproof case suited for 412LMC 422LMC and 423LMC
Measurements of the interior: W=5.75" L=7" D=3"
Measurements of the exterior: W=7" L=10" H=3.5"

1010-PER-FOOT

Replacement Sweep for One-Piece Door Grey Vinyl

Fits into the bottom of one-piece 'Stanley' doors.
Sold per foot
2" wide

510.5377.00

Whiting Side Seal Option for Dry Freight Door

A extra option when ordering a Dry Freight door
When purchased alone use part number 5377.115

PED72

Pedestal Post 72" Gooseneck Pad Mount

Black powder coat finish
Faceplate with universal hole pattern to fit almost any access device
2" x 2" square post
Neck is bent with a 6 in. center radius giving a tight professional look

41AC050-2

LiftMaster Electronic Circuit Board Assembly 315MHz

Fits 3265 PD612C
Replaces 41AC150-2 (board only - need to install on exisiting panel)
Also known as 41AC050 41AC050-2M

5464.96

Whiting Top Seal Coldsaver 96" L 2-3/16" W

08-11013

LiftMaster Bevel Gear 3/4" ID

Fits the LiftMaster GH operator

K20-1075C-2LP

LiftMaster Electric Motor 3/4 HP 115/230V 1Ph

G65_18300

LiftMaster Thermostat Control Heater Fin Type for 115V & 575V Gate Operators

Heater used in BG type gate operators

Installation Manual

STATION081

Manaras Push Button Control Station 1-Button Nema 4/12

1-button 1 N/O contact
Plastic

71-90503000

LiftMaster Non-Resettable Counter Field Kit

A 6-digit non-resettable 24VAC electro-mechanical counter is mounted in the operator control enclosure.
This devise counts the number of times the CLOSE coil is energized or whenever the operator reaches an auxiliary open limit switch.
This corresponds to the number of complete door cycles of use.

Installation Manual

DTG

Linear Delta3 Safety Edge Transmitter 310 MHz

Activates one Delta-3 receiver for remote stop or reverse safety edge
No cables or coiled wires
Mounting screws (4) supplied
Power: 9-volt battery
Codes: 256 (set by dip switches)
RF frequency: 310 MHz

.......more details

Programming Instructions

MGT

Linear MegaCode Gate Safety Edge Transmitter 318 MHz (DNT00068)

The MGT is the industry’s only fully supervised gate safety edge transmitter.
It automatically sends an hourly status report to the access controller indicating battery condition and if the transmitter is operational.
Should the edge sensor be disconnected shorted or tampered with the MGT will report a trouble condition.
Features Include:
Signals access controller for stop or reverse when safety edge activates
No cables or coiled wires

.......more details

Programming Instructions

655302

LiftMaster Pneumatic 22' Sensing Edge with 2-Wire Take-Up Reel

PRO-TB-5011-R

Micanan 1/2HP 115V 1P Trolley Operator with Brake - Contactor

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#410 roller chain on 1/2 HP models

029C98090

T-Style Complete Replacement Door White Stainless Steel Pkg 029C98090

Manufactured to exact size fully assembled tracking and spring assembly included.
Price varies according to size

1A3982

LiftMaster Operator Splash-Proof Cover

For models: MH H HCT GH
For wall mounted operators 31" L x 19" W x 18" D assembly required.

Installation manual

10-10355

LiftMaster Solenoid Link

TUBE_SHAFT_9FT

Hollow Shaft 1" x 9'-10" Galvanized 16 gauge

34299R

Genie Deluxe Wall Console Series II ** Discontinued Replaced by 39165R

Deluxe Wall Console for Genie Intellicode Series II only
3 function console: operates door opener controls lights and security lock out switch
Compatible with Code Dodger
Same as previous part number: GPWC-2WLB

.283-2-R

Cut-to-Length Torsion Spring .283 x 2" Right Hand Wound White

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

PS31L-NS11R1M00

Carlo Gavazzi Utility Switch

Switch DPST-NO/NC Chassis Mount
Actuator Type: Side Rotary Adjustable Roller
Termination Style: Screw Terminal
Ingress Protection: IP66 - Dust Tight Water Resistant
Switch Function: On-Mom Off-Mom
Current Rating (Amps): 5.5A (AC) 2.8A (DC)

.......more details

Installation Manual

MX00034-110V

Micanan Brake Assembly for PRO-HHD with 120V Solenoid (MX00206-110)

Complete brake assembly including 120V solenoid - solenoid cover sold separately part #MM00011

NX21

Allen Bradley 24V Reversing Contactor

Allen Bradley no. 104-C16KJH22-X6
Cat no. 100-C16*10

21-2LMC

LiftMaster 2-Strand Bell Wire 500ft White/Black

2 strand 22 gauge tin dipped copper hook-up wire
Color coded White & White/black wires

TC2

Tri-Code Transmitter 2-btn Visor - DISCONTINUED

Tri-Code series 2 channel transmitter model TC-2
300 & 310 MHz simultaneously
Each channel can be set on a seperate code format
Works with both 8 and 10 dip switch systems
Replacement: 380UT

535LMC*

LiftMaster Universal Radio Control Receiver 390 MHz **Replaced by 412HMC

Over 100 billion possible codes makes it impossible to duplicate the frequency
Jumper option for momentary or constant relay contact
Specifically for use with most 3-wire systems without a transformer
Accepts up tp 8 Security+ remote control codes and one keyless entry
Will work with LiftMaster Sears Craftsman or Chamberlain remotes with the yellow LED light - Sec+ format
Will work on 2 or 3 wire systems. If your system is 2-wire a 24-volt 85LM transformer is required

.......more details

ME113-E

Miller Edge Black End Outlet 2-Wire 1-1/2" wide x 1-1/2" high Sold by the Foot

Slide in edge designed for commercial sectional doors
Retrofits easily to 1-1/4" to 1-1/2" sectional doors
Touch sensitive signaling allows for immedita stopping or reversing of motion
For a sectional door: measure the daylight opening of the door or measure the panel width of the door
This gives you the "active length" of the edge - the length to order.
Lead wire: 22 gauge universal

.......more details

Installation Manual Worksheet Sell Sheet

.343_6"-LH

Torsion Spring .343 x 6" x 12ft LH Blue/Red

Wire size: .343
Inside diameter: 6"
Length: 12 ft

.319_5-1/4"-LH

Torsion Spring .319 x 5-1/4" x 12ft LH Blue/Green

Wire size: .319
Inside diameter: 5-1/4"
Length: 12 ft

.250_3-3/4"-LH

Torsion Spring .250 x 3-3/4" x 12ft LH Green

Wire size: .250
Inside diameter: 3-3/4"
Length: 12 ft

.262_2-5/8"-LH

Torsion Spring .262 x 2-5/8" x 12ft LH Red/Yellow

Wire size: .262
Inside diameter: 2-5/8"
Length: 12 ft

.250_2-5/8"-LH

Torsion Spring .250 x 2-5/8" x 12ft LH Green

Wire size: .250
Inside diameter: 2-5/8"
Length: 12 ft

.243_2-5/8"-LH

Torsion Spring .243 x 2-5/8" x 12ft LH White/Yellow

Wire size: .243
Inside diameter: 2-5/8"
Length: 12 ft

.234_2"-LH

Torsion Spring .234 x 2" x 12ft LH Blue/White

Wire size: .234
Inside diameter: 2"
Length: 12 ft

.295_1-3/4"-LH

Torsion Spring .295 x 1-3/4" x 12ft LH Blue

Wire size: .295
Inside diameter: 1-3/4"
Length: 12 ft

.283_1-3/4"-LH

Torsion Spring .283 x 1-3/4" x 12ft LH White

Wire size: .283
Inside diameter: 1-3/4"
Length: 12 ft

365LMC

LiftMaster Universal Plug-in Receiver 315 MHz

Compatible with any garage door opener with a simple 2-wire dry contact
Includes 2-conductor bell wire
Able to accept 8 Security+ transmitters & 1 digital keypad
Compatible remotes; 893MAX 890MAX 892LT 373LM 371LM 374UT 375UT

Programming Instructions Instructions de programmation

41A5483-4C

LiftMaster Circuit Board Assembly *** To Extent of Inventory

Assembly includes: circuit board end panel and light socket
For belt drive units
Fits 2280 2580 WD822K(s) WD922K WD912K(S)
Also known as 41A5483-4 41A5483-4B

41B0139

LiftMaster MVIS Motor Isolators 4/box

12-10029

Flanged Bearing 3/4" x 1-1/4" x 5/8"

30B363

Capacitor Motor Start 53 uF - 64 uF 220V *** No Longer Available

T-931-M

FL-Allstar 1-btn Mini Transmitter 109391-311 MHz

This single channel miniature transmitter controls one door.
It has a nine switches encoder with three positions: + 0 and -.
Manufacturer's model number: 9931MT (190-109301)
Dimensions: 1 3/8'' x 2 3/4'' x 1/2''

CP-SW-TD6A

Lynx Switch Light Delay

For the old Lynx 455 operators

144C54

LiftMaster Idler Belt Pulley

Wide idler belt drive pulley
For square rail assemblies

24-115-1

Relay 8 terminal 115VAC DPDT

For most operators with contactor
Will work on Liftmaster MH Lynx MCJH and more

.406_5-1/4"-RH

Torsion Spring .406 x 5-1/4" x 12ft RH Blue/Yellow

Wire size: .406
Inside diameter: 5-1/4"
Length: 12 ft

.343_5-1/4"-RH

Torsion Spring .343 x 5-1/4" x 12ft RH Blue/Red

Wire size: .343
Inside diameter: 5-1/4"
Length: 12 ft

.306_3-3/4"-RH

Torsion Spring .306 x 3-3/4" x 12ft RH Red

Wire size: .306
Inside diameter: 3-3/4"
Length: 12 ft

.343_2-5/8"-RH

Torsion Spring .343 x 2-5/8" x 12ft RH Blue/Red

Wire size: .343
Inside diameter: 2-5/8"
Length: 12 ft

.250_2-5/8"-RH

Torsion Spring .250 x 2-5/8" x 12ft RH Green

Wire size: .250
Inside diameter: 2-5/8"
Length: 12 ft

.218_2-5/8"-RH

Torsion Spring .218 x 2-5/8" x 12ft RH Yellow/Orange

Wire size: .218
Inside diameter: 2-5/8"
Length: 12 ft

.306_2"-RH

Torsion Spring .306 x 2" x 12ft RH Red

Wire size: .306
Inside diameter: 2"
Length: 12 ft

.250_2"-RH

Torsion Spring .250 x 2" x 12ft RH Green

Wire size: .250
Inside diameter: 2"
Length: 12 ft

41A5281

LiftMaster Extension Brackets for Snappy Sensors

Brackets used with Snappy Sensors 41A5034
For use with with 41A5266-1

SEA433

Erone Tuned Antenna 433MHz

Increase reception and/or range
11.5ft (3.5m) coaxial cable (RG 58) included
L-Shaped bracket for wall-mounting

Wireless System Chart

S2TR2641E2

Erone 2-Channel Mini Transmitter 433MHz

Open/Close remote for 2 doors
Palm-size transmitters 83 x 48 x 16m (3.25 x 1.9 x 0.6in)
Learn button programming
Ergonomic stylish design Rugged & durable
Light grey base with yellow buttons
unobstructed range: 820 ft (250m)

.......more details

Sell Sheet Brochure Wireless System Chart

OSH-6533-ECB

Manaras Opera-SH 3/4 HP 600V 3 Ph with Electronic Circuit Board

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"

Installation Manual Sell Sheet

OPH-6113-ECB

Manaras Opera-H 3/4HP 120V 1Ph with Electronic Circuit Board

A heavy-duty industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a self-engaging chain hoist for manual operation
Clearence: side room required 15"

Installation Manual Sell Sheet

LIMIT025

Manaras Single Snap-Action Limit Switch with Flat Lever

Replacement for LIMIT001
For all Manaras commercial operators prior to 2000 - except light duty models
Can be used on Doorlec Lynx and others
Unimax (SPDT)

Limit Switch Chart

LIMIT006

Manaras Single Micro Limit Switch with Flat Lever

Fits old medium-duty Manaras operators such as MDJ
SPDT - Cherry

Limit Switch Chart

LIMIT018

Manaras Double Limit Switch without Lever

Double limit switch (DPDT) - Cherry
The extra contact is used to control auxiliary equipment
Applies to all current operators

Limit Switch Chart

DRUM005

Manaras Steel Brake Drum 5/8" - replaces DRUM004

Replaces DRUM004
Brake drum with edges for current braking systems (2000 - current)
Used on all Manaras operators except Gear Head models.
Use with BRAKEPART019 (old part BRAKEPART017)

DRUM006

Manaras Steel Brake Drum Flat Track - replaces DRUM001

Replaces DRUM001
Brake drum for all operators except Gear Head models prior to 1999.
Use with BRAKEPART018

RADIO-KIT004

Manaras plug-in receiver for Board 70 operators 390 MHz

Direct ECB plug-in receiver card kit (RADIO-RE101C) for adding or replacing on-site.
Maximum 16 transmitters per receiver.
Compatible with transmitters RADIOEM101 and RADIOEM103 SD/MD