Devanco Canada - Get The Right Garage Door Opener‎ and Parts

26-40027

Truck Door Bottom Seal 98" Long for Whiting Dryfreight Doors

Flexible PVC material
Cross Reference: W #1676

26-14523

Truck Door Intermediate Panel (13" x 98") for Todco DryFreight Doors

These panels are cut to an extra wide width to fit wider vehicle applications.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
3/4" thick 7 ply exterior grade medium density plywood. Primer finish

26-14522

Truck Door Intermediate Panel (12" x 98") for Todco DryFreight Doors

These panels are cut to an extra wide width to fit wider vehicle applications.
Interlocking tongue and groove design for weather-tight joint and proper alignment.
3/4" thick 7 ply exterior grade medium density plywood. Primer finish

26-14521

Truck Door Intermediate Panel (11" x 98") for Todco DryFreight Doors

These panels are cut to an extra wide width to fit wider vehicle applications.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
3/4" thick 7 ply exterior grade medium density plywood. Primer finish

26-14323

Truck Door Bottom Panel with Seal (13" x 98") for Todco DryFreight Doors

These panels are cut to an extra wide width to fit wider vehicle applications.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
3/4" thick 7 ply exterior grade medium density plywood. Primer finish
Comes only with bottom retainer and seal (installed)

26-14321

Truck Door Bottom Panel with Seal (11" x 98") for Todco Dryfreight Doors

These panels are cut to an extra wide width to fit wider vehicle applications
Interlocking tongue and groove design for weather-tight joint and proper panel alignment
3/4" thick 7 ply exterior grade medium density plywood Primer finish
Comes only with bottom retainer and seal (installed)

25-10578

Truck Door Handle Keeper Only for Whiting Roll-Up Doors

Steel construction Black E-coat finish.
Keeper accomodates padlocks and trailer seals
Cross Reference: W #7515

R5998

Shaft Collar 1-1/4" OD 2" 2 Set Screws 3/8-16

With 2 set screws

Z9404

Coupler 1-1/4" Bore Adjustable

Malleable iron for strength
With 2 jam nuts
1-1/4" Bore with 1/4" keyway

DM18-125

Cable Drum Vertical Lift 18' 1100-18 (1-1/4") Pair

18' Vertical Lift aluminum die cast alloy cable drums for 1-1/4" shaft.
3/8"-16 x2" hardened cup point set screws installed with red heads.
Color coded: Red=LH and Black=RH. Pair includes (1) LH and (1) RH.
Max. Door Height: 18'-1".
Rated Lift per Drum: 660 lbs.
Max. Cable Diameter: 3/16".

.......more details

SF258

Spring Fitting 2-5/8" Pair

Universal thread for use in either LH or RH wound springs.
Pair includes: (1) winding & (1) stationary.
Maximum wire size diameter: .3310".
Set screw installed: 3/8"-16 x 1" (2).
Mounting: 1" tube or solid shaft - min. 1/2 turns on set screws.
Winding bar hole 1/2"

.......more details

SF175

Spring Fitting 1-3/4" Pair

Universal thread for use in either LH or RH wound springs.
A pair includes: (1) winding and (1) stationary.
Maximum wire size diameter: .2950".
Set screw installed: 3/8"-16 x 1" (2)
Fits 1" shaft
Winding bar hole 1/2"

.......more details

CBB532

Stop & Sleeve 5/32" 100 pair

Includes 100 stops (9150000628) and 100 oval sleeves (9150000622)

CB5320500

Cable 5/32" 7x19 500' Galvanized

Galvanized cable 5/32" 7x19 500ft spool.
Cable break strength: 2800 lbs

Comparison charts

CBC18

Thimble 1/8" - 100 per pkg

CBA18A07

Cable Assembly 1/8" 7x7 102" Sold per Pair

Galvanized cable assembly for a 7ft door. (102" = 8'6")
Sold as a pair

RS1039

Roller 3" Steel 9" stem 10 ball - To Extent of Inventory. Replaced by RS1039-C

Steel Roller Wheel diameter: 3"
Working length: 8.5"
Overall length: 9.64"
Box qty: 60 Box weight: 49.6 lbs (3-9-10 Steel)

RS1027

Roller 2" Steel 7" stem 10 ball

Steel Roller Wheel Diameter: 2"
Working Length: 6.25" Overall Length: 7.25"
Box qty: 180 Box weight: 73.5 lbs (2-7-10 steel)

RS1024

Roller 2" Steel 4" stem 10 ball

Steel Roller Wheel Diameter: 2"
Working Length: 3.5" Overall Length: 4.5"
Box qty: 150 Box weight: 53.3 lbs (2-4-10 steel)

R5210

Pulley 4" Zinc Plated Steel with Sheave Strap

Bored for 3/8" diameter bolt
Maximum cable diameter: 1/4"
Hardened inner race
Includes fork

R5114

Shaft Bearing 1-1/4" Machined 900LBS

Standard press-in bearing no retainer
Rated for 900 lbs

S-HOOK_SMALL

S Hook #8 Small 1/8" x 1-3/8"

903021ORBG

Operator Reinforced Bracket 21" Galvanized

Comes with clevis and clip pins. 24 per carton

903024ORBG

Operator Reinforced Bracket 24" Galvanized

Comes with clevis & clip pins. 12 per carton.

25-10276

Truck Door Universal Center Hinge Flush Mount **To extent of inventory

Steel construction Zinc plated finish
Eliminates routing of panels for easier installation
Cross Reference: H-325709

25-10275

Truck Door Universal End Hinge Flush Mount

Steel construction Zinc plated finish
Eliminates routing of panels for easier installation.
Removable cover allows roller change without hinge removal
Includes: Hinge roller cover & kep nuts
Cross Reference: H-325716

25-10103

Truck Door 2" Sealed Roller Steel for Whiting Roll-Up Doors

Zinc plated finish 10 roller ball design
Shaft Length: 2.62" Overall Length: 3.41"

25-10113**DISC

Truck Door 2" Steel Roller Long Stem for Whiting Roll-Up Doors Use Part # 94-61180-33-84

Unplated shaft 10 roller ball design
Shaft Length: 6.5" Overall Length: 7.5"
Long stem roller has a staked collar design versus machined collar on others.

25-10100

Truck Door 1" Steel Roller 2.5" Shaft Length for Todco Roll-Up Doors

Zinc plated Hardened shaft and raceways
Seven roller ball design
Cross Reference: T #61174 T #69162 W #4026 W #4027 291000
Box quantity: 25

25-10050

Truck Door Center Hinge Zinc for Todco Roll-Up Doors

Zinc plated Steel construction
Cross Reference: T #61196 T #59126 W #4012 220100

CUSTOM4X6PO

Devanco Loop 4'x6' rigid-pvc pave-over

Ideal for use on with gravel driveways or sufaces that are to be asphalted
Features a twisted lead-in to reduce the chances of interference and false detections.
Direct burial loops should be buried approximately 6" deep

Installation Instructions Instructions d'installation Spec Sheet Brochure Loop Placement Guide Guide de positionnement des boucles

WSL-1

Devanco WeatherStrip Lubricant 275g aerosol

Lubricates and protects Weather strip on garage doors doors and windows
Helps prevents sticking during extreme hot and extreme cold conditions
Same as LS-300
12 cans per case

Safety data sheet Fiche de données de sécurité

GTL-PLUS

Devanco Door Lube 454g Aerosol

Ozone Friendly Door Lubricant with anti-wear and extreme pressure additives.
Non-Drip formula provides long lasting lubrication and protection where metal to metal friction occurs. •Ideal for use on door tracks hinges springs rollers chains cables gears and more.
Available for private label
12 cans per case

Safety data sheet Fiche de données de sécurité

1104-12FT-WHITE

Residential Side & Top PVC Weather-Strip with cap 12' Long - White (W)

White rigid retainer with white flexible vinyl.
Dual fin vinyl.
Comes with cap to hide screws.

400BL

4" Light Brush Insert 6ft Long

Polypropylene bristles

MV-00012

Micanan 3-btn O/C/S w/Key Lock-Out Metal Housing Nema-4 Pushbutton Control Station

Surface mount
Metal Housing

803

Fasteners Sleeve Anchor 3/8" x 3" 50/Box

Secure anchoring into concrete brick or block

OGH-6115-ECB

Manaras 1-1/2 HP 120V 1Ph Gear Head Operator with Elect. Circuit Board

A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
Includes a self-engaging chain hoist for manual operation
25 cycles per hour 80 cycles a day
Hoist on right side standard can easily be moved to the left in field
Full overload protection
BRACKET112 must be used for wall mounting

.......more details

Installation Manual Sell Sheet

.375-514-R

Cut-to-Length Torsion Spring .375 x 5 1/4" Right Hand Wound Yellow/Green

Priced per inch - cones sold seperately
For factory installed cones use part no. C-514-INSTALLED

SHAFT116

Manaras Input Shaft for OSH

104255

Allstar Clip only for 8833TC

Clip only

.331-258-R-C

Cut-to-Length Torsion Spring .331 x 2-5/8" Right Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

K20-1075B-2TP

LiftMaster Electric Motor 3/4 HP 115/230V 1Ph L5 TEFC

Electric motor
Also known as: 20-1075B-2TP K20-1075B2T

285547

Rolling Steel Aluminum Transition Piece Sold per Foot

MK-00137

Micanan Transformer 600V-24V-100VA

5001-WG-14-MOAK

Residential Side & Top Weather-Strip 14' Long Wood Grain Medium Oak with Screws

PVC wrapped
Painted aluminum retainer
Dual fin vinyl
Painted screws to match. 1 screw per foot
Sold by full case quantity (20)

GTS-16

Garaga Top Seal Single-Fin Black 16ft ** To Extent of Inventory

Thermoplastic resin weatherseal co-extruded.
For Commercial / Residential applications
Screws directly to the top of door no retainer required

.295-334-R

Cut-to-Length Torsion Spring .295 x 3-3/4" Right Hand Wound Blue

Priced per inch
For factory installed cones priced seperately - use part no. C-375-INSTALLED

SF600U-114

Spring Fitting 6" Pair for 1-1/4" Shaft

Universal thread and is available for 1" or 1.25" Bore - must specify when ordering.
Pair includes: (1) winding & (1) stationary.
Not single thread.
Winding bar hole 5/8"

LB1212-14

Laminated Bumper Standard Black 12" L x 14" W 12" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

MP00053

Micanan Track and #410 (#48) Chain for 7' h Door *Actual length 114"*

For 1/3 & 1/2 HP Micanan trolley operators

.306-6-RH-C

Torsion Spring .306 x 6" x 144" RH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .306 ID: 6" Length: 12 ft

423LMC

LiftMaster 3-Channel Co-Axial Receiver 390 MHz

8" coaxial antenna included
Used for open/stop/close on commercial motors
N/O and N/C selectable
Compatible remote: 33LM

Installation Manual Manuel d'Installation

1104-16FT-BRONZ

Residential Side & Top PVC Weather-Strip with cap 16' Long - Bronze (F)

Bronze rigid vinyl retainer with bronze flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

GSD103L5R

LiftMaster Heavy Ind-Duty Slide Operator 1HP 208/230/460VAC 3PH

41A5807

LiftMaster Chain and Cable Kit 7' Door

This is a one piece 7 ft. Chain and Cable Replacement Kit

971LMC

LiftMaster 1-btn Security+ Transmitter 390MHz

390 MHz Security+ single button visor remote
Compatible with Security+ systems with Amber learn button including Chamberlain Sears Craftsman and Raynor code rolling residential openers (Safety Signal) manufactured 1997-2005
Visor clip and Lithium battery included (part #CR2032)
Same as 971LM 91LM 950CB 950CD

Programming Instructions

.207-1-3/4-RH-C

Torsion Spring .207 x 1-3/4" x 144" RH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .207 ID: 1-3/4" Length: 12 ft

41A3150

LiftMaster Terminal Block with Screws

For model 8355
Same as 041A3150

BT505L5

LiftMaster 1/2 HP 575V 3p Commercial Trolley Operator with a Brake Logic 5

Low profile trolley operator with brake installed
Comes with #48 roller chain

Installation Manual Manuel d'Installation Sell sheet Brochure

OSH-6432-ECB

Manaras Opera-SH 1/2 HP 480V 3 Ph with Electronic Circuit Board

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"

Installation Manual Sell Sheet

MA028

LiftMaster Padded Barrier Arm Yellow 14ft

For use on Mega-Arm gate operator
Requires adapter collars model MA031 - sold separately

Additional arm accessories

.406-514-R

Cut-to-Length Torsion Spring .406 x 5-1/4" Right Hand Wound Blue/Yellow

Priced per inch - cones & filler sold seperately
For factory installed cones use part no. C-514-INSTALLED

H11G12

Hinge #12 x 11 gauge

11 gauge # 12 hinge - 1.00 lbs
Bright zinc-plated steel construction
For use with 7/16" stem rollers

PRECUT-GALV

Special Order Pre-Cut Galvanized Spring Made to Order

180210

Decorative Pull Handle Aspen-V3 Style 10-1/4" Stamped Steel Sold per piece

As seem on carriage house doors

ETM17-24V

EMX Digital Timer *** No Longer Available

The ETM-17 series are panel mount digital timers the can be operated in 12V dc or 24V ac/dc power supply ranges depending on model ordered.
The output is a form “C” relay capable of 16A@ 30VDC.
Internal battery for memory backup of programming in the event of power failure.
Designed with 17 ON/OFF events per day and 15 combinations of daily programs for the best flexibility to the user.
Manual or Auto mode

PB-BE102BP

Contact Block N/C Contact Plastic Enclosure *** NLA No Replacement

Base mount

25-42-200

Extension Spring 7' Door - 200 lbs Tan

Double - Loop
25" long 42" stretch 200 lb load
Sold individually
Rated for 10000 cycles
Same as part number 120

Spec Sheet

.187_2"-LH

Torsion Spring .187 x 2" x 12ft LH ***NLA

Wire size: .187
Inside diameter: 2"
Length: 12 ft

.306-6-R

Cut-to-Length Torsion Spring .306 x 6" Right Hand Wound Red

Priced per inch - cones sold seperately
For factory installed cones use part no. C-600-INSTALLED

RBH503L5-LH

LiftMaster 1/2 HP 208/230/460 VAC 3 PH Comm. Hoist Op. Logic 5 Left Hand

H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door.
With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.

.......more details

50200

Doorlec Front Idler for ETB-3 with 410B9 -5/8" Sprocket

19-5010-SS

Roller Chain #50 Stainless Steel w/Connecting Link 10ft Length

1420-134-WHITE

Elton Commercial Window for Flush Doors 1-3/4" thick 1420 White Frame Sealed Glass

Screw together window kit
Thermal window
Frame size: 19 1/2” x 14 5/16”
Cut-out size: 18 3/4” x 13 5/8”
Vision area: 16 15/16” x 11 5/8“
Different glass options and frame colours are available upon request

.......more details

MD00020

Micanan Sprocket 50B40 X 1-1/4"

4001-6FT

Aluminum Retainer only for Light Brush 6' Long 45 degree

For angle application (45 degree)
For use with Light Brush or Vinyl Insert.

301010

Whiting C-4 Anti Lozenge Bracket Curb Side ** Price by Quote Only

.207_2"-LH

Torsion Spring .207 x 2" x 12ft LH Brown

Wire size: .207
Inside diameter: 2"
Length: 12 ft

OGH-6534-CONT

Manaras 1 HP 600V 3Ph Gear Head Operator Contactor Model

A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
Includes a self-engaging chain hoist for manual operation
25 cycles per hour 80 cycles a day
Hoist on right side standard can easily be moved to the left in field
Full overload protection
BRACKET112 must be used for wall mounting

.......more details

.250-134-R-C

Cut-to-Length Torsion Spring .250 x 1-3/4" Right Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-134-INSTALLED

771

Fasteners Lag Screw Hex Washer High Profile 5/16" x 1-3/4" 1000/Box *** Discontinued

7/16" head

7001-9-BLACK

Commercial Side & Top Weather-Strip 9' Long - Black (Code B)

Black galvanized steel with black dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.

1104-16FT-BLACK

Residential Side & Top PVC Weather-Strip with cap 16' Long - Black (B)

Black rigid vinyl retainer with black flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

LIMIT021

Manaras Single Limit Switch with Flat Lever

Single limit switch (SPDT) used to stop the door at top and bottom or as disconnect switch
Unimax
Snap-action

Limit Switch Chart

.331_5-1/4"-RH

Torsion Spring .331 x 5-1/4" x 12ft RH Red/White

Wire size: .331
Inside diameter: 5-1/4"
Length: 12 ft

.393_3-3/4"-LH

Torsion Spring .393 x 3-3/4" x 12ft LH Orange

Wire size: .393
Inside diameter: 3-3/4"
Length: 12 ft

412001

Linear 2-Channel Multi-Code Visor Transmitter 300 MHz

Compatible with 300 MHz Multi-Code receivers
Supplied with visor clip
Easy access to battery and coding switches
Power: 9-volt battery
Codes: 1024 (set by dip switches)
RF frequency: 300 MHz

.......more details

Installation Manual

.343_6"-LH

Torsion Spring .343 x 6" x 12ft LH Blue/Red

Wire size: .343
Inside diameter: 6"
Length: 12 ft

OHJ-6232-ECB

Manaras Heavy-Duty Jackshaft Operator 1/2 HP 208V 3 Ph with Elect. Circuit Board

25 cycles per hour 100 cycles per day
An Industrial duty operator featuring both the patented Hoist-a-Matic a self-engaging chain hoist for manual operation as well as a floor level disconnect
Specifically designed to motorize grills when a manual egress is required
Mechanical brake
Hoist on right standard
Full overload protection

.......more details