Devanco Canada - Get The Right Garage Door Opener‎ and Parts

MK-00699

Micanan Weatherproof Thru-Beam Photocell 0-45 ft Range

This item has been discontinued by the supplier

1003-3"-YELLOW

Bottom U-Rubber 3" Yellow 200' Long

3" yellow vinyl insert 200ft spool.

SG-13-NC

Telco Light Curtain with Rectifier Normally Closed 72" (13-193-028-D1-E-H59C-5) ***No Longer Available

Normally Closed
SGR13-193-028-D1-E-HS9-5
SGT13-193-028-D1-E-01-15
1928mm housing 1800mm active height 28 channels NC relay output 15m cable

Specification sheet Wiring diagram

MOTOR258-WIRED

Manaras Electric Motor TEFC 3/4HP 120/240V 1PH Wired

Electric motor comes pre-wired for a brake
Must specify if operator is equipped with electronic circuit board or if it is hard-wired

97798

Marantec 2 Piece Logic Board with Terminal Strip for EOS Models

For use on Easy Operating System (EOS) units 4500E 4700E and M50.
Includes the terminal strip for direct replacement of boards that had a power surge or burned out.
The marantec old model number was 78914 it is now 97798.

Programming Instructions

PBS3-RED

Replacement Button Only - Red

Replacement button for 02-403P

OPH-6532-CONT-R

Manaras Opera-H 1/2HP 600V 3Ph Contactor Model Right Hand

A heavy-duty industrial jackshaft operator.
For use on Standard High and Vertical Lift sectional doors.
Can also be used on Rolling doors or Grilles.
Comes with a self-engaging chain hoist for manual operation.
Clearence: side room required 15"

Installation Manual Sell Sheet

E3JM-30FT

Omron Thru-Beam Photoelectric Sensor Nema 4 0-30ft Range

Easy-to-wire terminal block
Built-in timer offers selectable ON-delay OFF-delay and one-shot
Relay or transistor output models
Light-ON/Dark-ON operation switch selectable
Model: E3JM-10M4-US

BINS-WHITE

Utility Bin Heavy-Duty Stackable White *** To Extent of Inventory

Usable in virtually every environment both indoor and outdoor and they are made from Polypropylene which will not fade in the sun
Outside dimensions: 16.75" L x 10.75" W x 6.55" H
Inside dimensions: 12.15" L x 8.375" W x 6.5" H
Sold per bin

.234-134-L-C

Cut-to-Length Torsion Spring .234 x 1-3/4" Left Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-134-INSTALLED

BK600/PR-USA

End Bearing Plate Flanged 8-GA 6" with Bearing. Commercial Sold as a pair

For commercial applications Used on wood jambs
Includes (1) RH and (1) LH plate with bearing C16-32F
EBF6" offset USA Style
1" ID

.306-514-R

Cut-to-Length Torsion Spring .306 x 5-1/4" Right Hand Wound Red

Priced per inch - cones sold seperately
For factory installed cones use part no. C-514-INSTALLED

V1104-GREY

Replacement Vinyl Only for 1104-Grey 200ft Roll

Sold in 200 ft rolls only

MP00106

Micanan Warning Light Red/Green Remote Mount Box

1005-1-3/4-8'

Aluminum Bottom Retainer U-Shaped

For door thickness 1-3/4"

28020010-500

Cable Stainless 5/32" 1x19 500' Inox ** Price on Request

Not for use in aircraft applications
1x19 contruction type 302 / 304

Comparison charts

MK-00041

Micanan Overload Reset 1-Phase 12 Amps

.393_6"-RH

Torsion Spring .393 x 6" x 12ft RH Orange

Wire size: .393
Inside diameter: 6"
Length: 12 ft

.319-6-R-C

Cut-to-Length Torsion Spring .319 x 6" Right Hand Wound Coated ** Price by Quote Only

Priced per inch. Cones sold separatly.
For factory installed cones order part # C-600-Installed

K94-33961

LiftMaster Wire Harness Kit MT MJ MH

R2

Erone Radium 2-Channel Key Chain Transmitter 433MHz

Designed for the control of automatic closing systems and anti-burglar systems thanks to its very high security coding system (KeeLoq® Hopping code).
The code sent by the transmitter changes at each activation avoiding any scanning and copying risk.
A special algorithm allows to keep synchronized transmitter and receiver.
Range up to 250 m (820 ft)
Ergonomic rugged & durable
Battery: Two 3V lithium battery (CR2016)

.......more details

Wireless System Chart

41A5668

LiftMaster Gear & Sprocket Assembly for ATS211X

For models: ATS211X ATS2113X
For older model ATS211 use part number 41C4470

Installation Manual Manuel d'Installation

7001-12-W/B

Commercial Side & Top Weather-Strip 12' Long - White and Black (WB)

White galvanized steel with black dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.
Full case quantity only (10)

GREASE

Gear and Rail Grease 3/4 oz Tube *** No Longer Available

A low temperature lithium based grease
To avoid tooth wear premature failure and temperature rise caused by friction by promoting sliding between teeth

.306_6"-RH

Torsion Spring .306 x 6" x 12ft RH Red

Wire size: .306
Inside diameter: 6"
Length: 12 ft

CP-SW-TD6A

Lynx Switch Light Delay

For the old Lynx 455 operators

6X18SC50

Devanco Loop 6' x 18' Saw-cut 50' lead-in

Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
Ideal for use on existing asphalt or concrete surfaces
Features a non spliced continuous wire throughout loop turns and lead-in.
Requires the use of loop sealer when being installed to ensure long lasting trouble-free detection

Installation Instructions Instructions d'installation Loop Placement Guide Guide de positionnement des boucles

9723-48

Whiting Pull Strap 48" with Steel Retainer

48" long

SA-TORSION-ASSY

Complete Torsion Assembly Special Order

Special order

41A5483-4C

LiftMaster Circuit Board Assembly *** To Extent of Inventory

Assembly includes: circuit board end panel and light socket
For belt drive units
Fits 2280 2580 WD822K(s) WD922K WD912K(S)
Also known as 41A5483-4 41A5483-4B

MP00022

Micanan Up-Charge Track and #41 chain for 24' h Door *Actual length 318"*

For 3/4 HP and 1 HP operators only

K94-37694-2

LiftMaster Electric Motor 1 HP for SL585U(L)

Replacement motor for SL585101U

.250-2-L

Cut-to-Length Torsion Spring .250 x 2" Left Hand Wound Green

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

OPH-6112-ECB-LH

Manaras Opera-H 1/2HP 120V 1Ph with Electronic Circuit Board Left Hand

A heavy-duty industrial jackshaft operator.
For use on Standard High and Vertical Lift sectional doors.
Can also be used on Rolling doors or Grilles.
Comes with a self-engaging chain hoist for manual operation.
Clearence: side room required 15"
25 cycles per hour 100 cycles per day

.......more details

Installation Manual Sell Sheet

4X16SC50

Devanco Loop 4' x 16' saw-cut 50' lead-in

Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
Ideal for use on existing asphalt or concrete surfaces
Features a non spliced continuous wire throughout loop turns and lead-in.
requires the use of loop sealer when being installed to ensure long lasting trouble-free detection

Installation Instructions Instructions d'installation Loop Placement Guide Guide de positionnement des boucles

PRO-HBH-7583U-R

Micanan 3/4HP 208V 3P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Right Hand

3/4 HP208V 3PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
N-1 Through-beam (MK-00649) photocells included. Other options available.
3-btn O/S/C (02-103) wall control station included
Adjustable Friction Clutch 5L320 drive belt
#50 Roller chain 18 tooth door sprocket included

.......more details

.319_6"-RH

Torsion Spring .319 x 6" x 12ft RH Blue/Green

Wire size: .319
Inside diameter: 6"
Length: 12 ft

8-9069

Serco Latch Bar ** Price by Quote Only

For Serco loading docks

VWS-34-DARK-BRWN

Screw Colored for Vinyl Weatherstrip #8 x 3/4" 1000/Box Dark Commercial Brown

Pan head
S point

MGT

Linear MegaCode Gate Safety Edge Transmitter 318 MHz (DNT00068)

The MGT is the industry’s only fully supervised gate safety edge transmitter.
It automatically sends an hourly status report to the access controller indicating battery condition and if the transmitter is operational.
Should the edge sensor be disconnected shorted or tampered with the MGT will report a trouble condition.
Features Include:
Signals access controller for stop or reverse when safety edge activates
No cables or coiled wires

.......more details

Programming Instructions

41A6102

LiftMaster Power Door Lock

For Jackshaft models

25-10103

Truck Door 2" Sealed Roller Steel for Whiting Roll-Up Doors

Zinc plated finish 10 roller ball design
Shaft Length: 2.62" Overall Length: 3.41"

9002-24FT

Commercial Side & Top PVC Weather-Strip Clip-On 24' Long *** To Extent of Inventory

Black rigid vinyl retainer with black flexible vinyl insert.
Reverse angle clip-on vinyl retainer.
Side use: clips onto steel jamb.
Also for residential use.

PRO-LH-5011U-RH

Micanan 1/2HP 115V 1P Medium-Duty Jackshaft N1 Eyes Monitored ECB Right Hand

Designed for use on commercial sectional doors with high or vertical lift
May also be used on small rolling grilles with max. 15 cycles per hour
Includes chain hoist
Includes solenoid brake
On board receiver with antenna
On-Board receiver holds up to 20 transmitters

.......more details

Installation manual Specification sheet

.331_3-3/4"-LH

Torsion Spring .331 x 3-3/4" x 12ft LH Red/White

Wire size: .331
Inside diameter: 3-3/4"
Length: 12 ft

IDEAL-QC250

Ideal Tin Dark Red QC-250 3' x 10' 30G ID8250

Sold per sheet comes rolled up.

3950

LiftMaster Jackshaft Door Operator for Comm. Rolling Sheet Doors

Designed for commercial rolling sheet door applications only - ideal for self-storage facilities.
It may be used on commercial rolling sheet doors with live or dead shaft measuring up to 12 ft. high and up to 14 ft. wide but not exceeding 650 lbs.
Maximum recommended duty cycle: 10 cycles per hour.
UL-Listed and UL-Labeled to insure compliance to local codes and approval at final inspection
Heavy-duty 24V DC motor provides ultra-quiet operation
Push button limit setting

.......more details

Installation manual Sell sheet

.250_3-3/4"-RH

Torsion Spring .250 x 3-3/4" x 12ft RH Green

Wire size: .250
Inside diameter: 3-3/4"
Length: 12 ft

COUNTER-SHUTTER

Counter Shutter Made to Order

Solid aluminum panels constructed of interlocking extruded aluminum slat sections.
Each slat is made of continuous 0050" (1.3mm) thick aluminum extrusion 1 1⁄2” (38mm) high by 3/8” (9.5mm) deep.
A perfect solution for service counters booths ticket windows and kiosks.
Made to Order item
Sizes vary in width from 3'-0" to 16'0" and in height from 2'0" to 10'0"
Never exceeds 100 sq/ft

.......more details

1019-1-3/8-12'

Rigid Vinyl Bottom Retainer Flat 12' Long

Black - for door thickness of 1-3/8"

71-MLSBC

LiftMaster Single Button Control Mod. Field Kit Mod. Logic

Field service mod. for adding single button feature to medium duty logic operators

1106-24-BLACK

Commercial Side & Top Weather-Strip 24' Long - Black

Aluminum retainer with black dual fin vinyl

98EO626

Panic Bar for Pedestrian Door- Exit Only

Panic Bar for exit only

NIR-HD

EMX Industries NIR Hood Cover Steel

The hood keeps rain and other debris from distorting or blocking the photo beam.
It also helps to keep the sun from glaring off the reflector and disturbing the beam's reflection.
Replaces the mounting bracket that comes with the sensor.
Comes with Hood two sets of nuts and bolts and a plug

12561

Doorlec Brake Drum 4" Diameter

Fits all Doorlec operators equipped with brake shoes

Q027

LiftMaster Motor Capacitor 240VAC 65 MFD K29C-65AU2415

Replacement Motor Capacitor (65uF 240VAC 50/60Hz).
Compatible with LiftMaster® CSW200U & SL3000U Models (post 2016) and various Commercial Swing and Slide Gate Operators; manufactured before 2016
Dimensions: 2" diameter x 4-1/4" long.

15475

Doorlec Heater Strip 250 W 208/230 V

SOLID_SHAFT_12'

Solid Shaft 1" Keyed 12 ft Galvanized

Actual length is approx. 12'-1"

PRO-GHCB-20053

Micanan 2 HP 575V 3P Gearhead Operator with Brake No Controls

Installation manual Specification sheet

829LM

LiftMaster Garage and Gate Monitor Sec+ 2.0 **to extent of inventory

This innovative monitor lets you check and close the garage door or gate from any room in the house.
Green and Red LED lights indicate whether the garage door or gate is open or closed.
Volume controlled audible alert lets you know when the garage door or gate is being opened.
Able to monitor and close up to four garage doors or gates.
Compatible only with new Sec+ 2.0 MyQ compatible garage door and gate operators.

Programming Instructions Instructions de programmation

422CBAC0

FAAC 422-115V Operator Only ** Price by Quote Only

SD105L5-RH

LiftMaster Heavy-Duty Slide Door Operator 1 HP 575V 3PH Right Hand (Must include hardware box)

Perfect for split and sliding doors involved with industrial applications.
It is installed above the door and corresponds with the direction the door will be traveling.
Comes equipped with an emergency disconnect and for manual lifting in an emergency and automatic reconnect.
The new logic 5 commercial operators come with MyQ Technology built in. * 828LM required
Built In Security+ 2.0 radio receiver
Solenoid brake included

.......more details

VFD-MOD

Micanan Variable Speed Modification Up-Charge for VFD Operators

Variable Frequency Drive modification for commercial operators
Whenever the primary power is 575V must add MX00164 panel

9150000624

1/4" Sleeve ONLY 100/pkg

Sleeves only 100 per pack

DM32-125

Cable Drum Standard Lift 32' 800-32 (1-1/4") Pair Torque Force

32 ft Standard lift aluminum die cast alloy cable drums for 1-1/4" shaft.
Pair includes (1) LH & (1) RH. Color coded: Red=LH and Black=RH.
3/8"-16 x 2" hardened cup point set screws installed with red heads.
Maximum Door Height: 32'-1".
Rated Lift per Drum: 1000 lbs.
Max Cable Diameter: 1/4".

.......more details

NO_RAILS

LiftMaster Residential Operator Head Only $20.00 reduction

111-0362

RW Box Track #333 10ft

For doors up to 1000 lbs
10 ga steel

114-0328

RW Track Bracket #31

18 x 31

1-1093

RW Track Bracket #333

22 x 333

O02R9506

AirLift O Ring Orig. Op-AirLift

2400-201

Linear Key 1/4" x 1/4" x 1-1/2"

41A8910

LiftMaster Chain Idler Pulley

10TD900INDHH1

BEA 1-Button Digital Transmitter Nema 4 900 MHz

Compact transmitter allowing wireless activation of any door control providing greater line-of-sight distance than legacy wireless frequencies.
It also provides better penetration of obstacles.
IP65
Operating temperature: -10 to 55C
Controls one 10RD900 receiver

GHX-311-3/4-LH

Doorlec Explosion Proof Gear Head 3/4 HP 120V 1PH ECB Left Hand

Nema 7/9 control box
Electrical connections from motor to control box consists of hazardous location certified fittings
NEMA 7/9 O/C/S push-button station included

CP-RE-24-OMRON

Lynx Relay 24V Omron DPDT 10A

GHX-311-3/4HP-RH

Doorlec Explosion Proof Gear Head 3/4 HP 120V 1PH ECB Right Hand

Nema 7/9 control box
Electrical connections from motor to control box consists of hazardous location certified fittings
NEMA 7/9 O/C/S push-button station included

PDC300-12-1-40-20

Pulse300 Direct Drive Opener 1/2 HP 110/240V 1ph 40:1 20' Cable ** Price by Quote Only

the PULSE 300 Series is recommended for large high-cycle sectional doors rolling steel doors and light springless applications.
It’s an ideal solution for balanced doors up to 1580 lb./500 ft²
The 40:1 ratio is recommended for most balanced commercial applications.
90V horsepower rated DC motor
If power fails the included 9Ah batteries takeover for continued door function
The built-in battery backup system eliminates the need for a chain-hoist but one can still be ordered as an option if desired.

.......more details

OSH-6813-M-N1-RH

Manaras Opera-SH 3/4 HP 208V 1 Ph Monitored ECB w/N1 Photoeyes Right Hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
25 cycles per day > 100 cycles per day

.......more details

D0MKTRP017

DURULITE STD-IND V-CAM CAST ASSEMBLY KIT

-Cam Assembly Kit for Chase Doors Standard DURALITE model doors. fits 90 x 90 spec door.

D0MKTRP001

DURULITE STD-IND ROLLER KIT

oller kit for Chase Doors Standard DURALITE model doors. Fits 90 X 90 and 180 X 90

114-0298

RW Support 18 x 33

Size: 18 x 33
Material: Formed Steel 3/16" thick
Finish Black Enamal

2806.192.290

Whiting .192 x 2-3/16 x 29" Roadside with Cones

2807.192.290

Whiting .192 x 2-3/16 x 29" Curbside with Cones

K79-13493A-400

LiftMaster FDOA Control Board 400 Chip

400 Chip Fire Door Operator Replacement Kit

C715477300K-1.25

Governor 1.25" Bore 1/4" KW

6X26PO50

Devanco Loop 6' x 26' pave-over 50' lead-in

Ideal for use on with gravel driveways or surfaces that are to be asphalted
Features a twisted lead-in to reduce the chances of interference and false detections.
Direct burial loops should be buried approximately 6" deep

050DCRJB3MC

LiftMaster Receiver Logic Board DC. WiFi HD RJO

Security+ 2.0 Receiver Logic Board Replacement Kit
For use with the LiftMaster® 98032 Heavy Duty Residential Jackshaft DC Wi-Fi® Garage Door Operator; powered by myQ® and manufactured 2024 to present
The unit will feature a yellow circle learn button

MASDCBB3

LiftMaster MEGA SPRINT High-Speed DC Barrier Gate Op ARM SOLD SEPARATELY Incl 29-NP712

24VDC (1/2 HP equivalent) motor
The heavy-duty motor supports 10000 cycles per day with an operator speed of .9 seconds to open or close.
Radio receiver built-in
Aluminum alloy chassis
Built-in battery backup
Soft start/stop

.......more details

OGH-6114-M-N1-RH

Manaras 1 HP 120V 1Ph Gear Head Operator with Monitored ECB N1 Eyes Right Hand

A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
Includes a self-engaging chain hoist for manual operation
25 cycles per hour 80 cycles a day
Hoist on right side standard can easily be moved to the left in field
Full overload protection
BRACKET112 must be used for wall mounting

.......more details

TDC48-12

LiftMaster Trolley Chain Pack #48 700LBS 12ft Door

Chain pack only
TDC48-12 is a #48 Chain Pack Kit for 12 Ft. Trolley Rail Assemblies.
For use with LiftMaster® MAXUM TDC 700 Series Standard-Duty Trolley Commercial Door Operators; installed on 12' commercial doors.

.171-2-3/16-72-RH

Spring Wire .171 x 2-3/16 x 72" RHW Galvanized

2376.206.35.940

Whiting Torsion assembly .206 wire size 35" spring length 94" shaft

7176.218*28.85

Whiting Heavy Duty Torsion Assembly .218 x 2" shaft 85"

BGARM14

LiftMaster 14' Arm only for Techna Barrier Gate

For use on Techna gate operator

EP2983-BLACK

Exhaust Port 4" non latching long barrel Black Nylon

Inside diameter: 4"
Outide diameter: 4-3/8"
Sleeve: 2" (non latching)
Flange: 6"
Includes fasteners
Black Nylon

.......more details

D4-18

Extruded Bumper Black 18" L x 4 1/2" W x 3 3/4" H w/Metal Insert

Reinforced prime rubber of Durometer 75 (±5) (ASTM D2240)
8.3 N/mm2 (±0.5) Tensile Strength (ASTM D792)
98% (±2) impact recovery
All extruded fenders are supplied with a metal washer insert

LVB420-11SF/P2

Steel-Faced Laminated Bumper Black 4" Projection Vertical Installation 20" x 11" Sold Individually Style P2

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required.
5/8" anchor bolts mounted through pre-drilled holes into dock or can be welded to curb angle.
Steel face is 3/8" thick heavy duty high carbon steel that is mounted over a laminated dock bumper.
Plate to be welded to 2 or 3 steel support brackets which are to extend back to the 3/4" supporting rods.
Brackets to be punched with elongated holes to allow steel face to "float" upon impact.

.......more details