Devanco Canada - Get The Right Garage Door Opener‎ and Parts

OPJ-6533-ECB

Manaras Heavy-Duty Jackshaft Operator 3/4 HP 600V 3 Ph with Elect Circuit Board

An industrial operator designed for use on standard high and vertical lift sectional doors
Can also be used on rolling doors and grills
It incorporates a floor level disconnect mechanism for manual operation
25 cycles per hour 100 cycles per day
Continuous-duty single phase capacitor start or 3 phase motor open drip proof
Mechanical brake
#50 roller chain and sprocket on final drive
Full overload protection

Installation Manual Sell Sheet

T753L5

LiftMaster 3/4 HP 208/230/460V 3P Commercial Trolley Operator Logic 5 ***No Longer Available

Trolley low profile with brake
Suspended from the ceiling the operators are used on sectional overhead doors with standard lift.
T operators are directly attached to drive and control the door.
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.

Installation Manual Manuel d'Installation Sell sheet Brochure

87-P-075

LiftMaster Turac 3/4" Push on Fastener

OPJ-6212-ECB

Manaras Heavy-Duty Jackshaft Operator 1/2 HP 240V with Electronic Circuit Board

An industrial operator designed for use on standard high and vertical lift sectional doors
Can also be used on rolling doors and grills
It incorporates a floor level disconnect mechanism for manual operation
25 cycles per hour 100 cycles per day
Continuous-duty single phase capacitor start or 3 phase motor open drip proof
Mechanical brake

.......more details

Installation Manual Sell Sheet

OPJ-6112-ECB

Manaras Heavy-Duty Jackshaft Operator 1/2 HP 120V with Electronic Circuit Board

An industrial operator designed for use on standard high and vertical lift sectional doors
Can also be used on rolling doors and grills
It incorporates a floor level disconnect mechanism for manual operation
25 cycles per hour 100 cycles per day
Continuous-duty single phase capacitor start or 3 phase motor open drip proof
Mechanical brake

.......more details

Installation Manual Sell Sheet

OMJ-6112-ECB

Manaras Medium-Duty Jackshaft Operator 1/2 HP 120V with Electronic Circuit Board

Designed for use on standard high and vertical lift sectional doors
Can also be used on small rolling doors and grills
Single phase intermittent-duty motor has instant reverse and internal automatic reset thermal overload protection
Mechanical brake
Floor level disconnect mechanism which must be engaged for manual push-up operation
14 cycles per hour 50 cycles per day

.......more details

Installation Manual Sell Sheet

K76-36398

LiftMaster Electric Motor 1/2HP 24VDC for CSL24V / CSW24V

Replacement motor with improved brush assembly for CSL24V and CSW24V gate operators

PPLK1-10

LiftMaster Passport Lite 1-Button Mini Remote with Sec+ 2.0 Technology 10/PKG

Passport Lite Remote Controls provide cost-effective single button access solutions for gate access only or high-capacity commercial properties applications such as employee parking lots and tenant garages.
These remote controls are specifically designed for gate access control and are not compatible with LiftMaster Garage Door Openers.
2x the range of standard remote controls
Narrow-band transmission on 3 simultaneous frequencies (310 MHz 315 MHz 390 MHz)
Compatible with LiftMaster® commercial receivers (850LM 860LM PPWR STAR1000) and Security+ 2.0™ Gate Operators
Keychain remote control sold in a 10 pack

.......more details

Programming Instructions Instructions de programmation Sell Sheet Brochure

V1104-WHITE

Replacement Vinyl Only for 1104-White 200ft Roll

Sold in 200 ft rolls only

36664R

Genie Screw Drive Shuttle Assembly

Compatible with the following models: GPower 900 TriloG 1200 TriloG 1500 PowerMax 1200 PowerMax 1500
Works with Screw Drive carriage assembly part # 37845R - sold seperatelty

24701R

Genie Chain Drive Dog Limits 3-PKG

Replacement limits for older model Genie Chain Drive openers with steel T-Rail assembly
Replaces the clip-on limit switch
Limit dogs external rail-mounted limit switches

1044622-REFURB

FAAC 400 Hydraulic Swing Gate Operator 115V Reburbished

Refurbished unit.
Tank body

20462R

Genie Carriage Release Assembly Belt Drive ** No Longer Available

Carriage slide sold seperately- part number 27175B
This carriage is used for Genie and Overhead chain and belt channel rails

27175B

Genie Carriage Slide Only

Carriage NOT included. Carriage part number 20462R
Compatible with Genie GPS and PMX belt drive models

9150000629

3/16" Stops ONLY 100/pkg

Stops only 100 per pack

36254R

Genie T-Rail Carriage Assembly

This part is listed under several part numbers: 36254R.S 36197A 21784R 20438R
For all chain drive openers with steel T-rail assemblies
Must be installed with inner slide part # 25605R

34538S.S

Genie Magnetic Close Down Limit Switch Assembly 138"

For Chain Glide models

19792B

Genie Replacement Door Bracket Zinc

Universal door bracket to connect door to door arm
Same as 19792A04

BRACKET112

Manaras Wall Mount Stud Bracket

This Wall Mount Bracket can be used with all Manaras Wall Mount commercial operators except the MRGH and MGH models
Will not work will Trolley Operators

APOW3

LiftMaster Transformer 120V input 34VDC output

Plug-in AC/DC converter
Used as a replacement transformer for all LA400 models

735

Fasteners Flat Washer 3/8" USS Zinc 1000/Box

ID: 0.40625’’
OD: 0.8125’’
THK: 0.066’’

MTAW22B-R

Miller Edge MT22 Air Wave Black Right Hand Sold by the Foot

Installation Manual Sell Sheet

LEVER065

Manaras Brake Lever

37408

Doorlec Reversing Contactor BF9 120VAC

GH103-L5

LiftMaster Gearhead with Brake 1 HP 208/230/460V 3-Phase Logic 5

Includes CPS-U photoeyes

Installation Manual Manuel d'Installation Sell sheet Brochure

MH00015

Pillow Block Bearing 1" UCFL 205-16

MD00327

Micanan Sprocket 50B15 x 1" 1/4" KW 2SS

MH00007

Micanan Shaft Collar 1" I.D

K77-12486

LiftMaster Parts Box for Model MT/ BMT

41A3589-3

LiftMaster 7ft Belt Assembly for Models '93-2000

Full 7' belt assembly for models 1270 1280 and 1280R

C-600-INSTALLED

Cones 6" Factory Installed (Pair)

For do-it-yourself installation use part no. SF600

.343-6-R

Cut-to-Length Torsion Spring .343 x 6" Right Hand Wound Blue/Red

Priced per inch - cones sold seperately
For factory installed cones use part no. C-600-INSTALLED

763

Fasteners Flat Head Carriage Bolt 1/4-20 x 2-1/4" 1000/Box

Full length thread
Max torque = 6

765

Fasteners Serrated Flange Nut 3/8-16 1000/Box

Serrated flange face to provide locking

796

Fasteners Keps Nut 1/4-20 1000/Box

Lockwasher & nut combination

776

Fasteners Hex Head Bolt 1/4-20 x 1" 1000/Box

1/4" bolt has 7/16" head
Max torque = 6
Full thread
Grade 5

Q400MAU

LiftMaster Relay Module

AELD

LiftMaster Elite Plug-In Loop Detector

For use with Omni Control board available on the Chamberlain commercial line.

Installation Manual

37028C.S

Genie Control Board for Model 2022 ** Repl. by 39537R.S (no cover)

For ReliaG 800 model 2022 gaarage door opener ◾ Genie 37028A Control Board for Genie Models 2022 2024 and 2042 Chain / Belt Drive Openers ◾ Works for the following models only: ◾ ReliaG 800 (2024) PRO Series 1 Piece Rail ◾ QuietLift 800 (2042) ◾ ChainLift 800 (2022)

SSZP13-1

Solid Shaft 1" Keyed Zinc Plated 13'-1"

SSZP17-1

Solid Shaft 1" Keyed Zinc Plated 17'-1" ** to extent of inventory

SSZP19-1

Solid Shaft 1" Keyed Zinc Plated 19'-1"

SSZP11-6

Solid Shaft 1" Keyed Zinc Plated 11'-6"

SSZP9-6

Solid Shaft 1" Keyed Zinc Plated 9'-6"

MT22-BLACK-RH

Miller Edge 2-Wire Pressure Sensitive Edge Sold per Foot

��Electromechanical small profile edge for rolling steel foor applicaton. •Touch sensitive signaling allows for immediate stopping or reversing of motion. •The MT22 is completely flexible and will contour to curved surfaces. The MT22 also acts as weatherstrip. •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •2 wire NO configuration •Horizontal mount •ANSI/UL325 recognized component •One year warranty

Installation Manual Worksheet Sell Sheet

1116633904.S

Overhead 4-btn Transmitter 390 MHz *** Temp Unavailable

Replaces the 1091303904.S
4-channel transmitter opens and closes 4 doors
Codes using 9 dip switches with 3 positions
Battery (ALK12V) and visor clip included

1116633901.S

Overhead 1-btn Transmitter 390 MHz

Replaces the 1091303901.S
1 channel transmitter opens and closes 1 door
Codes using 9 dip switches with 3 positions
Battery (ALK12V) and visor clip included
Compatible with all Overhead Door 390 MHz frequency garage door openers that were manufactured before 1996.
This was a common remote on the 556C

.......more details

Programming Instructions Instructions de programmation

K001D8073-1

LiftMaster Three Phase Relay/Power Board 230/460V (K001D8397)

For Logic 5 commercial operators
014D1279E
New part number K001D8397

772

Fasteners Lag Screw Hex Washer High Profile 5/16" x 2" 1000/Box *** Temp. NLA

7/16" Head
Hex washer high profile head

K72-16421

LiftMaster Limit Shaft Assembly LGO****Discontinued and no Longer available

Assembly includes: Limit shaft Limit nut Sprocket Roll pin Bushing E-Ring and Chain.

Installation Manual

OSH-6113-CONT

Manaras Opera-SH 3/4HP 120V 1Ph with Contactor

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
25 cycles per day > 100 cycles per day

.......more details

Installation Manual Sell Sheet

41B4103

LiftMaster Service Belt Tensioner

K001C8103-1

LiftMaster L5 Antenna

K001D8075-1

LiftMaster Logic Board - L5 ** USE K001D8395

14D1279E

Programming Instructions Instructions de programmation

LC2D129B7

Contactor Telemecanique 24V ** Discontinued

DT-312

Linear 1-btn Delta3 Transmitter 312 MHz *No Longer Available*

Activates one Delta-3 receiver
Test/operate LED
Visor mounting clip supplied
Power: 9-volt battery
Codes: 256 (set by dip switches)
RF frequency: 312 MHz

.......more details

Programming Instructions

5463.96

Whiting Vinyl Top Seal 96" 1-1/2" wide

Original TempGuard top seal used on Supreme body trucks from 2009
One piece rigid plastic cap retainer with a flexible vinyl seal.

71B575G

LiftMaster Brake Kit 575V with Solenoid Field Install SL585 and SL595

Kit comes complete with: Brake hub kit brake release lever brake disk spring cup studs compression springs brake solenoid solenoid cover spacers mounting plate pressure plate feather key and conduit.

Instruction Manual

K72-12508

LiftMaster Output Shaft Kit (1/3 & 1/2HP)

For commercial operator model T

Installation Manual

ETB-311-1/2HP

Doorlec 1/2HP 115V Trolley Door Opener TEFC Motor

Trolley model heavy-duty door operator designed to provide smooth dependable operation of sectional overhead type doors.
DC2000 Logic Controller
Comes with standard O/C/S push button station

75-10170

LiftMaster Trolley-Slider Assembly (08-10169)

For LiftMaster trolley models MT T GT
Also known as: 307085008 75-10170 08-10169 085008 7510170

MP-00001

Micanan Timer to Close 24V Modification

3-button o/c/s function timer will start counting from fully open reverse and reset from any device
24V modifictation available on control circuit ( R) and ( M) and is included with the new full function smart board (E)

111854.0002

Overhead Logic Board for RSX 3/4 & 1 HP 1PH

Description: KITPCB1PH3/4-1HPSX/HXUL10
For RSX ad RHX models 3/4 & 1 Hp Single phase operators

165-B

Fusible Link For Loads 1 to 10 lbs

Length is 1.4328" width is .563"
Distance between center is .938"
Priced per each
Fire rated at 165 degrees Fahrenheit

915007048X

Extension Cable 1/8" 7x19 14' Sold as a Pair

Cable assembly for extension spring door - looped on one end the other is raw (no stops)

AIRSWITCH008

Manaras Metal Case for AIRSWITCH007

SEDK2641A4

Erone Wireless Radio Keypad 433 MHz

Wireless RF Digicode® keypad.
Frequency: 433.92 MHz.
For automatic door opening in sequential mode.
6 channels to control 6 different relays or 6 different RF receivers.

Programming Instructions Wireless System Chart

NTE5326

Bridge Rectifier 25A 600V

Bridge Rectifier Converts AC to DC voltage
For powering DC accessories when AC transformer present
Small size with convenient mounting hole in center
Same as MCCM2506-RH

Characteristics

TH827-24V

Erone 7-Day Timer 24V

24V AC/DC input voltage with battery back-up
One "NO" contact and one "NC" Contact
Up to 8 ON and OFF switches a day (56 per week)
Easy to read LCD Display
Manual override button
Ideal to keep a gate open during the day

.......more details

Programming Instructions Instructions de programmation

510.1000.00

Whiting Premium Topcoat Paint Option White

Option for Dry Freight Doors

PED72

Pedestal Post 72" Gooseneck Pad Mount

Black powder coat finish
Faceplate with universal hole pattern to fit almost any access device
2" x 2" square post
Neck is bent with a 6 in. center radius giving a tight professional look

TAC1

LiftMaster Single Line Telephone Access Control with Radio

The TAC1 can be connected to two devices such as a door or gate using the two independently controlled relays or wirelessly using Security+ technology standard or any combination of the two.
Provides wired communication and secure access control at the gate or door.
Measurements: 6" h x 8.75" w

Installation Manual Programming Instructions

75424

Marantec Universal Receiver / Remote Kit 315 MHz

Universal receiver kit includes one plug-in radio receiver and one M3-2312 remote control transmitter
Universal receiver plugs directly into the wall outlet
Same as part # 73870
Made in Germany

Installation Instructions Programming Instructions

65853

Marantec Programming Wire - Old ML to New M3

Used when programming old style remotes to the newer style 3 series remotes and Wireless Keypads.

M3-2314

Marantec 4-Button Transmitter 315 MHz 97244/122468

Same as part # 65893 and 97244
Visor mount
Includes battery CR2032
Made in Germany

Instructions

DF086.1

Whiting Dry Freight Door 3/4" with Track Balancer Standard Hardware and Side Seals

Includes side seal upgrade

41A5624-8

LiftMaster DC Passpoint Assembly

Travel Module for 3850

41AC050-2

LiftMaster Electronic Circuit Board Assembly 315MHz

Fits 3265 PD612C
Replaces 41AC150-2 (board only - need to install on exisiting panel)
Also known as 41AC050 41AC050-2M

28-30015

Truck Door 1" Vertical Track with Holes 93.5" for Todco Roll-Up Doors

Galvanized steel 14 gauge construction
Holes drilled to allow for faster plug weld installation to frame
For use with 1" rollers

36190T.S

Genie Control Board 3-Terminal

Fits the Legacy overhead model and the PMX500 model and is compatible with:
696CD/B
Genie PMX/B Model PMX500-IC/B
Model 496CD/B
GCG & GCG-L Series e.g. GCG350 GCG350L
PCG & PCG-L Series e.g. PCG400 PCG450L

.......more details

41D7742-7

LiftMaster Travel Module

Fits models 8165 8355 & 8155W

G808001

LiftMaster Lock and Key Kit

Lock and Key Replacement Kit. Compatible with LiftMaster® Models BG770 and BG790 Barrier Gate Operators
Also known as: K808001 80-8001 808001

K-73BG770-3311

LiftMaster Service Kit E-Box for BG770

5464.96

Whiting Top Seal Coldsaver 96" L 2-3/16" W

08-11012

LiftMaster Bevel Gear 5/8" ID

Fits LiftMaster GH operator

2X6SC50

Devanco Loop 2' x 6' saw-cut 50' lead-in

Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
Ideal for use on existing asphalt or concrete surfaces
Features a non spliced continuous wire throughout loop turns and lead-in.
requires the use of loop sealer when being installed to ensure long lasting trouble-free detection

Installation Instructions Instructions d'installation Loop Placement Guide Guide de positionnement des boucles

SOLID_SHAFT_10'

Solid Shaft 1" Keyed 10 ft Galvanized

Actual length is approx. 10'-1"

SOLID_SHAFT_9FT

Solid Shaft 1" Keyed 9 ft Galvanized

Actual length is approx. 9'-1"

STATION081

Manaras Push Button Control Station 1-Button Nema 4/12

1-button 1 N/O contact
Plastic

25605R

Genie Inner Slide Kit for Chain Drive Models

The innerslide attaches to the chain and connects the carriage to the chain
Works on the following Genie and Overhead Door models:
IC250 PMX80 PMX500-IC/B IC250/B PMX85 ALC Series PMX60 PMX300-IC/A RCD Series PMX65 PMX500IC/A PMX75 PMX-IC/B
SP99 – SP SERIES LD100-500-100A-550A LAD125-555
CM6000-6000A-60-70-80-60S
OHD-696 696CD + Others

.......more details

MWRTA12B

Miller Edge Wireless Transmitter with Audible Alarm and 1 Channel Receiver

For 2-wire edges
Was previously MWRTA02A now has a new board making installation easier
Includes single channel receiver (MWR12A) and transmitter (MWTA12) with audible low battery alarm.
This feature that activates when the battery has only 25% of its life remaining indicating the battery should be replaced. The alarm sounds for 5 to 10 seconds at 1 to 2 minute intervals.
The receiver operates on either 12 or 24 volt AC/DC and provides N.O. or N.C. output.