Devanco Canada - Get The Right Garage Door Opener‎ and Parts

BLOCK-YELLOW

Spring Repair Blocks .3175-.3625 Pair

For the temporary repair of a broken spring.
Wire size: .3175 - .3625

24-RWB-PAIR

Winding Bars Round 24" Set of 2

Cold rolled hardened steel.
Machined to 1/2" at one end with 5/8" outside dia. on the other.
Sold as a pair.

1001-10-GREY

Commercial Side & Top Weather-Strip 10' Long - Grey

Aluminum retainer with grey dual-fin vinyl
Sold by full case quantity (10)

32-48-170

Extension Spring 8' Door - 170 lbs Orange ** Replaced by 27-48-170

Double - Loop
32" long 48" stretch 170 lb load
Springs sold individually
Rated for 10000 cycles

Spec Sheet

DM54

Cable Drum High Lift 54" 5250-54 Pair

54" High Lift aluminum die cast alloy.
3/8"-16x2" hardened cup point set screws installed with red heads.
Color coded: Red-LH and Black=RH.
Maximum High Lift: 54" Maximum Door Height: 180" + High Lift
Rated lift per drum: 500 lbs 1000 lbs per door max
Maximum cable diameter: 3/16"

.......more details

27-20304

Truck Door Cable Drum and Bearing Curbside (RH) for Whiting Roll-Up Doors

Black nylon drum with bearing
Cable drums are grooved to prevent cables from binding or wearing prematurely.
Angle of cable slot determines Left or Right drum (Left = Red)
Cross Reference: 2548

25E10270

Truck Door Shaft Cover for Bottom Roller Black E-coat finish for Whiting Roll-Up Doors

Steel construction Black E-coat finish
Attaches to bottom panel for roller support
Shaft cover for 1 stud
Cross Reference: W #1021

DM4X8

Cable Drum Standard Lift 8' 400-8 Pair

8' Standard Lift aluminum die cast alloy.
Pair includes: (1) LH and (1) RH Color coded: Red=LH and Black=RH
Max. Door Height: 8'-1".
Rated Lift per Drum: 265 lbs
Max. Cable Diameter: 1/8"
Mounting: 1" tube or solid shaft with 1/4" keyway

.......more details

Z9955

Spring Gauge

Ruler style spring gauge
Stainless steel
Confirms spring ID & wire size
Place formed end between 2 coils count 20 coils to obtain wire size

R5999

Shaft Collar 1" with 1 Set Screw

Set Screw: 5/16 x 18

H11G03

Hinge #3 x 11 gauge

11 gauge # 3 hinge - 0.72 lbs
Bright zinc-plated steel construction
For use with 7/16" stem rollers

H11G04

Hinge #4 x 11 gauge

11 gauge # 4 hinge - 0.72 lbs
Bright zinc-plated steel construction
For use with 7/16" stem rollers

Z9002

Pusher Spring - 15" Sold as a Pair

Pusher spring 15" long with 6" travel. Sold as a pair

903ADJORBX

Operator Reinforced Bracket 18-24" Adjustable Zinc Plated No Hinge

Also known as ARB brackets

4X8SC50

Devanco Loop 4' x 8' saw-cut 50' lead-in

Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
Ideal for use on existing asphalt or concrete surfaces
Features a non spliced continuous wire throughout loop turns and lead-in.
requires the use of loop sealer when being installed to ensure long lasting trouble-free detection

Installation Instructions Instructions d'installation Loop Placement Guide Guide de positionnement des boucles

12562

Doorlec Lower Brake Shoe - Left

Fits on all Doorlec operators equipped with brake shoes
Use with drum #12561

10-30702

LiftMaster Chain Guard Top Cover Mfg Painted (K10-30702-2)

BOARD065

Manaras Replacement Circuit Board (No Monitoring)

Replacement kit that includes BOARD060 (control board) & BOARD066R (power board)
For all Manaras operators built before October 2010
For newer models built after October 2010 use BOARD070 or replacement kit BOARD075

Installation Manual Manuel d'installation Replacement Chart Guide de remplacement

T-832-M-H

FL-Heddolf 2-btn Mini Transmitter P219-2K-311 MHz (T-832-M-S)

Open/Close mini remote for 2 doors
Keychain and 12V battery included
Compatible with Keystone T-832-H and old Allstar T-832
8 dip switch
Same as P219-2K

Manual

DCWALLCTL

LiftMaster Floor Level Wall Controller with LCD Display

Compatible with LiftMaster MAXUM Commercial Door Operators.
4-line LCD display gives you access to more information at all times
Bringing programming troubleshooting and Diagnostics down to the floor level will save you time and money
Menu based user interface allows you to scroll through edit and save options and settings easily.
Dimensions: 3.586” W x 8.166” H x 1.732” D

LA500-1PKG-XLMU

LiftMaster Residential / Light Comm. DC Swing Gate Op. Extra Large Control Box UL325 (Includes LA500CONTXLMUL (K74-39309-1) LA500DC (2x) 29-NP712 LMRRUL)

LA5001PKGXLMU replaces model LA5001PKGXLMDC
Updated unit complies with new UL325 code revised Jan 2016
System now requires monitored secondary entrapment devices unit will include LMRRU safety photo eye
Includes one LA500 arm XL control box receiver unit and photo eye and 2 -7amp batteries
Residential arm style swing gate operator with Extra Large control box and battery backup system
Battery Backup safeguards your property by providing up to 500 cycles* or up to 24 days* of standby power when the power is down.

.......more details

GTL-PLUS

Devanco Door Lube 454g Aerosol

Ozone Friendly Door Lubricant with anti-wear and extreme pressure additives.
Non-Drip formula provides long lasting lubrication and protection where metal to metal friction occurs. •Ideal for use on door tracks hinges springs rollers chains cables gears and more.
Available for private label
12 cans per case

Safety data sheet Fiche de données de sécurité

17308

Doorlec DC-3000T 1-btn Transmitter 313 MHz

One block of 10 dip-switches for programming
Compatible with Doorlec 17307 receiver (DC-3000R)
New smaller Keychain style transmitter replaces older square beige visor remote

Programming Instructions

2120-493

Linear Gate Arm Assy Weld Style for Swing Gate

2500-1495

Linear Pushbutton Stop/Reset

WB-660

Skylink Wireless Wall Console w/ Auto Close for ATR Garage Openers

For use with the Skylink garage door openers.
Oversized Push Button for activating the garage door opener.
Activate opener light on/off and the light will remain on until the button is pressed again.
Feature with Lock function to ignore all radio signals for added security.
Illuminated LED indication.
Easy to Install.

.......more details

TDC41-12

LiftMaster Trolley Chain Pack #41 1200/2200LBS 12ft Door

Chain pack only
TDC41-12 is a #41 Chain Pack Kit for 12 Ft. Trolley Rail Assemblies.
For use with LiftMaster® MAXUM TDC 1200 and 2200 Series Standard-Duty and Industrial-Duty Trolley Commercial Door Operators; installed on 12' commercial doors

TDC41-10

LiftMaster Trolley Chain Pack #41 1200/2200LBS 10ft Door

Chain pack only
TDC41-10 is a #41 Chain Pack Kit for 10 Ft. Trolley Rail Assemblies.
For use with LiftMaster® MAXUM TDC 1200 and 2200 Series Standard-Duty and Industrial-Duty Trolley Commercial Door Operators; installed on 10' commercial doors

BOARD076R

Manaras Replacement Power Board

Used on all Manaras circuit board type operators

10SSTI

BEA Active Infrared Presence Sensor

Active infrared sensor for industrial environments.
Applications: automatic industrial doors gates and automation.
Uses triangulation to detect presence of an object eliminating false detections caused by varying ground conditions.
Can be mounted on stationary or moving objects.
Can be used individually or daisy-chained with up to 8 other modules.
Can be used on narrow and wide doors.

.......more details

K41-0381-000

LiftMaster Toroidal Transformer 700lb / 120VAC-240VAC

For Maxum ops

JHDC-7S-460

LiftMaster MAXUM Jackshaft 1/2HP 460V 3PH DC Operator 30 Cycles/Hour 700LB

New DC high-efficiency motor and gearbox provides the power needed and smooth start and stop to reduce wear-and-tear on your door and operator
Average of 12” per second opening on sectional doors and 8-9” per second on rolling steel doors
Provides seamless operation by supplying standby power when the power is down (battery backup kit sold separately)
Listed to ANSI/CAN/UL325 Standard for USA/Canada
Drive Type 65:1 Gearbox with #50 Chain Output
Radio Receiver DC Logic 1.0 board with Security+ 2.0® rolling code technology remote controls and binary DIP switch remote controls

.......more details

JHDC_Installation-manual JHDC_Manuel-installation Data sheet Fiche Technique Quick connect guide Guide de connexion rapide Ordering guide Sprocket recommendation

XF600VAC7

LiftMaster 600V Transformer Kit 700

For use with various LiftMaster® MAXUM Series DC 700 lbs. Standard-Duty and Industrial-Duty Commercial Door Operators

SB3381-PAIR

Garex End Bearing Plate 3-3/8" - 1" Commercial Sold as a Pair

IRB-MON2

EMX Industries Universal Thru-Beam Photocells UL325 Built in Hoods

Kit includes transmitter receiver integrated protective hoods and removable lens sunshield
Thru beam configuration
UL325 compliant
Four (4) monitoring interfaces
115 ft. operating range
Easy installation and set-up

.......more details

Manual Sell Sheet

GALV-331-334-144-R

Torsion Spring .331 x 3-3/4" x 12ft RH Galvanized Red/White

Wire size: .331
Inside diameter: 3-3/4"
Length: 12 ft
Galvanized

41176R

Genie Shaft Assembly Kit 6070/6170

SEF2420

Erone Adjustable Infrared Photocell 20M (65ft)

Adjustable lens 180° right to left and 40° Top-Bottom
Range 20M (66ft) in all conditions
Adjustable Sensitivity
Power supply 12/24 Vac/dc
Operating temperature -20/+55 °C
Dimension: 90 x 60 x 60mm (3.5 x 2.4 x 2.4 inches)

.......more details

Wireless System Chart

REEL-20

Devanco Take-Up Reel 2-Wire Metal 18-ga 20ft Black

18-gauge
20 ft extended
Take up reels are NOT recommended for use with any failsafe type edge. Use coil cord only.
Also called Reel cord
Comes with reset button for CSA conformity

BEA-10FALCON-EX30

BEA Falcon Motion Detector w/Exp Proof Housing 30ft Cable

FALCON EX combines a microwave activation sensor with an explosion-proof/flame-proof housing
Ideal for use in unique environments such as chemical manufacturing petroleum refining and agriculture.
FALCON EX can be mounted from 11.5' to 23' to fit any industrial application.
Nema4/IP66
Detection Zone: Falcon EX: 13’×16’ at 16’
Operating temperature: -22 to 140F

.......more details

301033

Whiting C-4 Zytel Roller Holder Black ** Price by Quote Only

OTBH-6113-AM06

Manaras Apt-Style Trolley Op 3/4HP 120V 1Ph Monitored w/N1 Eyes Silencio

The Silencio operators have integrated noise reducing enhancements which make it 4X QUIETER than the Premium Trolley Apartment model (OTBH-A.05).
A low headroom apartment type garage door operator designed for use on industrial standard lift sectional doors with high cycling daily frequency requirements
Mounting (Low Headroom Design): Ceiling-mounted with only 6.25" headroom clearance required below the tracks. For indoor use only.
Dimensions: Back Room: door height + 4'5" (1350 mm)
Head Room For Tracks: 5.625" (143 mm) above the highest point of door travel

2050Z

LiftMaster HD Roller Cage Bearing Hinge Bolt to Gate/Post Zinc Coated Sold Individually

Heavy Duty Roller Cage Bearing Hinge - Bolt to Gate Bolt to Post (Corrosion Protected Zinc Coated)
Heavy Duty Construction for Maximum Durability
Dependable Roller Cage Bearing Design
Even Weight Distribution
Five Times The Weight-Bearing Surface of the Nearest Large Hinge
Convenient Bolt-On Model

.......more details

D-2-5

Keyed Disconnect Device 5ft Cable

Operated from the outside to disconnect the trolley for manual operation of the door
Must specify if keyed alike is required or keyed random will be shipped
Mounting plate dimensions: 2 1/2” x 1 3/32”

FAAC-844-115V

FAAC 844 Slide Gate Operator 115V

The FAAC Model 844 automated system for sliding gates is an electro-mechanical operator transmitting motion to the sliding leaf via a rack or chain pinion appropriately coupled to the gate
The non-reversing system ensures the gate is mechanically locked when the motor is not operating and therefore no lock needs to be installed
Control Board: model 780D

P-535T

Pulsar 3-btn 27-Door O/C/S Transmitter 318 MHz

Allstar compatible
Wall mount
OPEN-CLOSE-STOP 27 doors
8 dipswitches 318 MHz

Programming instructions

P-639T

Pulsar 3-btn 9-Door O/C/S Transmitter 318 MHz

Allstar compatible
Wall mount
OPEN-CLOSE-STOP 9 doors
8 dipswitches 318 MHz

Programming instructions

P-8833TC

Pulsar 3-btn 9-Door Transmitter 318 MHz

Allstar compatible
Nine channel transmitter
8 dipswitches 318 MHz

Programming instructions

PLA10

NICE Electric Gate Lock Vertical Mount 12V

Required for gates longer than 3m (9.84')
Vertical mounting
Possibility of manual opening
Power: 12V 15VA 50Hz

041-0365-000

LiftMaster Sensor Eyes and Brackets 1997-Current

For use with various LiftMaster® and Chamberlain® Belt Drive and Chain Drive Garage Door Openers; manufactured after 1997.
Complete kit includes: (1) Sending sensor eye (with LED) (1) receiving sensor eye (with LED) (2) replacement brackets and replacement hardware.
Also known as or Replaces: 041A5266-1 041A5266-3 41A5266-3 41A5266-1 12D584-1

K41-0073-000

LiftMaster HD Main Control Board

Compatible with the following models: HDSL24UL HDSL24ULMC HDSW24UL HDSW24ULMC

1016-ADHSVE-CAULK

Adhesive for Storm Shield Caulk Tubes 10.3oz

For use with 1016

WASHER035

Manaras Belleville Washer 31.5 x 16.3 x.08mm Zinc Plated

Used on serveral models

HAE00077

Linear LDCO Control Board BBU Compatible

DC motors
Replaces HAE00061

5416-2

EMX RAVEN Programming Remote

Makes it easy to set up and make adjustments to all key parameters of the RAVEN motion detector while at ground level
Remote sold separately

Quick Start Guide

K12-8032

LiftMaster Flange Bearing 4-Bolt 1-1/2"

Also known as: 128032 12-8032 G128032
For use with LiftMaster® Models BG770 and BG790 Barrier Gate Operators.

CAPXLV

LiftMaster Smart Video Intercom - L

LiftMaster’s cloud-based video intercom for multi-tenant residential properties.
The intercom allows residents to see their visitors through live video and grants access to the building via the MyQ app
Display and interface – 10” color display with touchscreen
Connectivity – WiFi cellular wired high-speed DSL
Audio capabilities – Voice over IP – digital call quality with no long-distance charges
Video capabilities – One-way video calling with a 135-degree view

.......more details

SGP-353-1-575/3

Doorlec Gate Master 1 HP 575V/3P with Heater

Post mount heavy-duty industrial slide gate operator
Max. gate weight: 2500 lbs
Gate travelling speed: 45 ft / minute
175 watt heater included

41D1624-2

LiftMaster Motor DC 12V RJO

This 12V DC Motor Kit is compatible with the following LiftMaster® Models: 8500W 8500WLA LJ8900W and LJ8950W

K10-34758-2

LiftMaster Battery Tray CSL24U

For use with CSL24U
Also known as: K75-34986-2

EXA-1000

Linear Omni-Directional Remote Antenna (AAE00198)

The EXA-1000 is a 1/2 wave center fed vertical antenna composed of three parts: an Antenna assembly with an F connector attachment; a Base Plate assembly with radial mounting provisions; and a five-foot 75-ohm coaxial cable.
The cable connects to the antenna base on one end and the receivers F connector on the other.
If the antenna must be mounted further than five feet from the receiver an extension cable of up to a maximum of 25 feet may be used instead of the five foot cable supplied.
Because of the cable resistance the performance of the EXA-1000 may be degraded by using longer than a 25 foot cable
Compatible with all Linear receivers with Type F antenna connector
Receives signals in 288 to 320 MHz range

.......more details

Installation manual

BK-MS

Locking Bracket for T-Handle on Mini Storage Door Sold Individually

Pre-drilled Stainless Steel bracket

BOARD003

Manaras Repl. Circuit Board MA-50 110V Lite Duty

Used on model MDTB

380UT

LiftMaster Universal 2-btn Transmitter Gen 5

The Universal Remote Control is compatible with most major brands of garage door openers gate operators and commercial door operators
Operates up to two brands of garage door openers eliminating the need of multiple remotes on your vehicle visor.
Universal compatibility allows you to operate two different garage door manufacturers and/or frequencies at the same time
Security+ 2.0®
Compatible with: LiftMaster® Chamberlain® Craftsman® 390MHz 315MHz 310MHz Security+2.0 390 MHz Security+ Rolling Code 315 MHz Security+ Rolling Code 390 MHz Billion Code 390 MHz Dip Switch (7 8 and 9 position)
Genie® 390 MHz Rolling Code (Intellicode) 315 MHz Rolling Code(Intellicode) 390 MHz Dip Switch (9 and 12 position)

.......more details

380UT Manual (EN/FR)

2100-258-UPS

Linear Tension Bolt UPS 1/2 Chain

Used on various Linear Gate operators

.177-2-R

Cut-to-Length Torsion Spring .177 x 2" Right Hand Wound Gold

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

106-0005

Rodent Block Pull Chain Seal 2"

Often overlooked and left unprotected the opening for the pull chain on dock levelers is an ideal entry point for mice and rats.
The chain provides a built-in ladder for pests and the chain opening is more than big enough for rats or mice to squeeze through.
Features solid cast aluminum construction easy to install and completely cover the chain opening.
The seals are designed to sit completely below the surface of the dock plate and will not interfere with material handling equipment.

7515

Whiting Handle Keeper for #77 Lock

XBA6

NICE LED Arm Light Kit 6M

108207

Fasteners Self Drill & Tap Tek Screw 5/16-12 x 1" 100/Bag

Indented Hex Washer Head
7/16" Head
Max RPM = 2000

31110

Doorlec Sprocket 50B23 1" Bore KW/SS

65-5209

LiftMaster Manual Hoist Mod. Kit #48 Chain Drive

This is an available factory installed modification only

02-406-2

LiftMaster Key Set Qty 2

Replacement Key ONLY for 02-406 2006-2015 #1 or #1502M

K180A0357

LiftMaster Reset Switch

Compatible with LiftMaster RSW12UL CSW24V swing gate operators
Switch to Reset/Disconnect position to disconnect the operator for manual operation
Switch to Normal Operation position to return to automatic gate operator functions
Dimensions: 3/4" L x 3/8" W x 2" H

LIMIT024A

Manaras Double Snap-Action Limit Switch 2xSPDT 46 degree

Q118

LiftMaster Access Door Keys Qty 2 K80-50295

Also Known as K80-50295

950-189

Richards-Wilcox 2" or 3" Single Bottom Cable Bracket Right Hand

950-188

Richards-Wilcox 2" or 3" Single Bottom Cable Bracket Left Hand

Original Richards-Wilcox part

WD-309961

Wayne Dalton Wired Wall Station 372Mhz 3976

2 Buttons
Color: Cream
Dimensions: 2-1/4"" x 4""
Works with Wayne-Dalton Models: Classic Drive: 3014 3018 3018DLX 3514 3522 3522DLX; Quantum: 3214 3314 3316 3414; Prodrive: 3220C 3221C 3222C 3224C 3320B 3322B 3324B

HD3120-BLACK

Commercial 3" Inside Slide Lock Black Powder Coated

Track use: 2" or 3"
Throw: 2.62"
Slide bar: 0.138"
Individually wrapped

41D3058

LiftMaster Electric Motor and Bracket Kit

Complete kit includes: Motor and bracket assembly sprocket RPM sensor grease and bearings
Also known as: 41D3058 41A2821 41A2820 41A3058

ACP00942

Linear Control Board for Telephone Entry System AE-100

Board only for AE-100 telephone entry system

XBA13

NICE Rubber Impact Red Protection Strip 9M/Pkg

BK009

Commercial Top Bracket Adjustable 1-Bolt Tall Sold per Piece

Zinc plated
12 gauge roller carrier and base plate

Q210

LiftMaster Gear Box Kit #70 K75-50224

For use with various LiftMaster® Commercial Swing Gate Operators manufactured after 1997

POWERHINGE

LiftMaster Power Hinge - All Steel Pair

Elite Power Hinge ball bearing hinges for steel swing gate (Pair)
Double 5/8 in. ball bearings for smooth operation
3/4 in. solid stainless steel shaft grounded and tempered to Rockwell standards
Continuous cycle operation self-lubricating/no grease fittings
Offers a unique design so the gate never hits the post
3000 lbs. per pair weight capacity

.......more details

R5207

Pulley 4" Zinc Plated Steel

Bored for 3/8" diameter bolt
Maximum cable diameter: 1/4"
Hardened inner race

PPLK1-100

LiftMaster Passport Lite 1-Button Mini Remote with Sec+ 2.0 Technology 100/PKG

Passport Lite Remote Controls provide cost-effective single button access solutions for gate access only or high-capacity commercial properties applications such as employee parking lots and tenant garages.
These remote controls are specifically designed for gate access control and are not compatible with LiftMaster Garage Door Openers.
2x the range of standard remote controls
Narrow-band transmission on 3 simultaneous frequencies (310 MHz 315 MHz 390 MHz)
Compatible with LiftMaster® commercial receivers (850LM 860LM PPWR STAR1000) and Security+ 2.0™ Gate Operators
Keychain remote control sold in a 10 pack

.......more details

Programming instructions Instructions de programmation Sell sheet Brochure

K1D7078

LiftMaster EMI Board

This is a replacement EMI Board. Compatible with LiftMaster® Model HCT Overhead Gate Operators

DW-RS-200

Fraba Wireless Air Wave Switch Transmitter/Receiver Kit NOC/NCC

The small radio transmitter unit and the pneumatic switch are packaged within the DW3S-200 case while the receiver is built into a Nema 4 case
It is equipped with a NC or a NO relay
Kit includes radio transmitter DWTR-200 433 Mhz and receiver RSW-R 433 Mhz
Battery is included # CR2032

Operating Instructions

K71-D1PH

LiftMaster Drum Brake Kit 1 Ph 115/230V (Late Model Logic 5 Shoe and Drum Models)

Internal Solenoid Drum Brake with Cable (120V Single Phase) Replacement Kit.
Compatible with LiftMaster® Logic 5.0 Model T SD J H and HJ Industrial-Duty Operators.
Complete service kit includes: Solenoid Cover Brake Solenoid Brake Drum Cable Mounting Plate and Installation Hardware.
Quiet preferred sound profile
Industry benchmark stopping performance with adjustability
Significantly reduced modes of failure

.......more details

Installation manual Manuel d'installation

.421-6-R

Cut-to-Length Torsion Spring .421 x 6" Right Hand Wound Gold

Priced per inch - cones & filler sold seperately
For factory installed cones use part no. C-600-INSTALLED

LM4AH-12

LiftMaster Battery 4.5AH 12VDC

Designed to fit Fire Fly III Plus Model of Release Device
12 Volts 4.5 AHR (amp hour rating)
Dimensions: 4" Depth 2-3/4" Length 3-1/2" Wide

SC-8

Wheel Chock SC-8 Aluminum

"Claw" Like Bottom Assures Dependable Grip on Any Surface
Chock Fits Snug Under Tire Contour for Maximum Holding Power
Often Preferred For Snow and Ice Conditions
Light Weight and Reliable
Size: 7" wide x 11-1/2" long x 8" high

E/BLOP/150

Automatic Systems Safety Edge for BL229 14'-9" (EABLOP/150)

DB13-T

Molded Rubber Bumper Black 13" L x 10" W 4" Projection 2-Hole Tapered Sides Sold Individually

Manufactured from reinforced prime rubber
Rectangular horizontal mount
4-1/2" depth
Ideal for light traffic loading docks.
Molded bumpers are molded in one piece and will not warp rust rot or harden.
Perfect protection for in-plant wall protection from forklifts and other material handling vehicles. and will not warp rust rot or harden.

.......more details