Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home Your Search rbh501l5
BK000-B/BLACK

Residential Top Roller Bracket Adjustable 2-Bolt Black Powder Coated Sold per Piece

  • Sold per piece - not sold as a pair
  • Meant for 2" hardware
  • Individually wrapped
RADIO-EM144

Manaras 144-Door Transmitter O/C/S 390 MHz

  • 3-button O/C/S transmitter for144 Doors
  • LED Indicator Nema 1 Enclosure
  • Soft touch push buttons including a bright red stop button for easy identification
  • Compatible with Manaras Opera Rolling Code Series "100" Transmitters and receivers
  • Compatible with Manaras Operators equipped with Board 70 or external receiver Radio-RE901 and Radio-Kit004 & Radio-Kit005
  • Wall or Post mount
    • .......more details
Sell sheet
22010-UNCUT-KEY

Doorlec Un-Cut Key for 22010 Sold Each

22010

Doorlec 1-22mm Cylinder Complete with Normally Open Contact Spring Return Includes 2 keys

RADIO-RE901A

Manaras 1-Channel 24V Dip-Switch (313MHz) & Rolling Code (390MHz) Receiver with Commercial Antenna

  • For Commercial/Industrial Garage Door Applications
  • Wall Mount
  • DIP Switch and Rolling Code Technology
  • Sixteen (16) Fixed Codes / Receiver
  • 313 MHz & 390MHz Radio Frequency
  • Controls One (1) Door
    • .......more details
Programming instructions
HAE00012

Linear Motor Cover LDO50

  • Replacement motor cover only
GAL.262-258-144L

delete

T-831

FL-Allstar Stationary TransmitterO/C/S 3-Btn 1-Door 311 MHz 107483

  • Open/Close/Stop stationary remote for 1 door.
  • Designed for commercial automatic door and gate operator applications.
  • This transmitter can operate a single receiver connected to one operator
  • Compatible with 3-channel Allstar and MVP receivers
  • Easy access to battery and coding switch
  • Power: 9-volt battery
    • .......more details
218-45-10

PVC Connector for 3/4" - 3/32" RAH

K72-33889

LiftMaster Clutch Shaft Kit

  • Clutch Shaft Kit for MJ Jackshaft Operators
  • Complete with: Clutch Plate Clutch Shaft Bearing Sprocket 5L Belt Motor Pulley Spring Clutch Disk Shim Washers Castle Nut Flatwashers Cotter Pin Roll Pins and Push on Fastener
  • Same as 308117101K 310115111 K7212589 K72-12589 71116121J
BK009

Commercial Top Bracket Adjustable 1-Bolt Tall Sold per Piece

  • Zinc plated
  • 12 gauge roller carrier and base plate
RELAY026

Manaras Relay DPDT 120VAC

DOC-6000

Atlas Door Operator Board

  • The Atlas board has been discontinued the Lynx 6000 is a direct replaceement
UTIL001

Utility Limit Switch Telemecanique w/Roller

ST101-INT-WHITE

Lynx Intermediate Panel White 10x24

CP-CLH-58

Lynx Clutch Hub 5/8"

SS-STRUT-16

Strut Stainless Steel 2-1/2" x 16ft 16-Ga

SS-STRUT-10

Strut Stainless Steel 2-1/2" x 10ft 16-Ga

WHITING-PW

Whiting White Urethane Topcoat Option Dry Freight Door Panel

  • This is an option when ordering a panel
PRO-HHD-10053E-R

Micanan 1 HP 575V 3P Heavy-Duty Jackshaft NM ECB No Eyes Right Hand

  • 1 HP575V 3 PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
  • Non-Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
  • 3-btn O/S/C (02-103) wall control station included
  • Adjustable Friction Clutch 5L320 drive belt
  • #50 Roller chain 18 tooth door sprocket included
  • Emergency chain hoist with electrical cut-off for manual operation
    • .......more details
Installation ManualSpecification Sheet
14000S-20PKG

LiftMaster Sentinal 20' Manual Lift Gate SM Includes Arm and Base

  • Also known as: 14000S-20
  • Includes 20ft lift arm and lift base
  • Non- motorized traffic control for unmanned entrances that do not require credentialed access.
  • Type: Surface Manual Lift Barrier Gates
  • Color: Red and White
  • Length/Weight: 20 ft. (233 lbs. ea.)
    • .......more details
VPL-12

Autogate 12V Motor

MW00024

Chain Tensioner for 1"-1" Shafts Inside the Box

  • Chain spreader for installation with 1" operator shaft & 1" door shaft.
  • Includes 2 shaft collars and set screws.
CAP425

Capacitor 125VAC 425MFD

  • Motor Start Capacitor 125V 425 MFD
K72-13912

LiftMaster Clutch Shaft Kit T GH

EP2982-NL

Exhaust Port 4" non latching short barrel

  • 4" inside diameter 1/4" sleeve
  • Includes fasteners & gaskets.
  • Polished aluminum finish.
41D9202

LiftMaster End Panel Driver Board ** Discontinued

  • 041D9202 is a Front End Panel with LED Light Connector/Driver Board Replacement Kit.
  • For use with LiftMaster® and Chamberlain® Residential Garage Door Openers; manufactured after 2018.
  • Compatible with the WLED model
PRO-GJ-5011R-RH

Micanan 1/2HP 115V 1P Gearhead Operator with Mechanical Contactor

  • Includes 3-btn O/C/S control station Nema 1
  • External radio control terminal strip
  • Heavy duty worm gear reduction in oil bath gearbox
  • 1/2 HP high starting torque instant reverssssible motor
  • #41 roller chain drive & 41B19 operator drive sprocket
  • Emergency floor level disconnect for manual operation
    • .......more details
K75-10406

LiftMaster Drive Chain Connector Link Kit APT

  • Also known as: 30515363 305105363
SGP-321-1-230/1

Doorlec Gate Master 1 HP 230V 1 Phase with Heater and Lights in Cabinet

  • Post mount heavy-duty industrial slide gate operator
  • Max. gate weight: 2500 lbs
  • Gate travelling speed: 45 ft / minute
  • 175 watt heater included
883LMW

LiftMaster Door Control Bell Button Wi-Fi

  • Controls garage door operation and garage door opener lights
  • On-board programming capability makes it easy to program remote controls and MyQ® enabled accessories
  • Compatible only with Security+2.0™ LiftMaster® garage door openers enabled by MyQ® technology
  • Note: If your door control has an image of a light bulb above the light button with 3 wavy lines above it the door control is capable of placing a Wi-Fi Garage Door Opener into Wi-Fi Learn mode.
ME-00009

Micanan Trolley Track Spreader Bar Assembly 1 Unit Only

  • 3/4" x 5.79" long
  • 2 are included when bought in the kit #MX-00119
Q028

LiftMaster Manual Crank for SL3000 (K07-50303) **DISCONTINUED

  • Hand crank for SL3000
PRO-GH-10081U-L

Micanan 1 HP 208V 1P Gearhead Operator N1 Eyes Monitored ECB Left Hand

  • Includes 3-btn O/C/S control station Nema 1
  • External radio control terminal strip
  • Heavy duty worm gear reduction in oil bath gearbox
  • Solenoid brake standard
  • #50 roller chain and sprockets on final drive
  • Emergency chain hoist with electrical cut-out switch for manual operation
    • .......more details
SL585101UL

LiftMaster Industrial Slide Gate Op. 1 HP 115/230/208V 1 Ph Heater NOT Incl.

  • SL585UL features a heavy- duty industrial lockable metal cover.
  • Security+ 2.0® safeguards access with an encrypted tri-band signal to virtually eliminate interference and offer extended range.
  • Manual Disconnect when unlocked allows gate to be operated manually.
  • Quick Close and Anti-tailgate quickly secure property preventing unauthorized access.
  • Lockout/ tag-out Feature prevents power from being switched on when servicing operator and safeguards workers from high-voltage power.
  • Automatic Solenoid Brake prevents the gate from being back driven.
    • .......more details
Installation ManualManuel installationBrochureSell sheet
WASHER014

Manaras Type A Plain Washer 5/8

K32-37560-3

LiftMaster Gear Reducer 28:1

  • This is a replacement Gear Reducer (28:1). Compatible with LiftMaster® HCTDCU Overhead Gate Operators.
510.2996.07

Whiting Steel Roller Upgrade Option for 7 Panel DF Door

  • Upgrade option only - must accompany a door order
K75-39337

LiftMaster Trolley Nut Kit LA500

  • The travel nut on LA500DC and LA500DCS gate operators may break when excessive force is applied to the gate such as being struck from a vehicle.
  • The travel nut can be identified as the white plastic nut that attaches to the internal lead screw of the arm.
  • The symptom of this problem is that the trolley assembly slides back and forth along the guide slots without mechanical restraint.
  • LiftMaster has created Trolley Service Kit K75-39337 with all the necessary parts and provides instructions on how to replace a damaged travel nut within an LA500 arm
Replacement instructionsInstructions de remplacement
CM30E

Push-to-Exit Button Green

PRO-APTC-5053-U

Micanan 1/2HP 575V 3P Apartment Trolley Op. Photo Eyes Monitored ECB

  • Low clearance design for APT applications (8.5")
  • Door speed: 7" per second
  • N-4 Micanan compatible monitored photocells included
  • Monitored board
  • Side access hinged cover for easy access to controls
  • Three button open-close-stop control station Nema-1
    • .......more details
Installation manual
33102

Doorlec Overload 1.20 to 2.00 Amps

MP00130

Micanan Up-Charge Track and #41 Chain for 14' h Door PRO-APTC

  • For 1/2 HP Micanan trolley operator PRO-APTC
20104

Doorlec Coupling Spring 5/8" LJH

210134

Skylink Pulley Assembly - Belt

  • Fits Skylink & Mastercraft 046-0266-0 belt model openers
OSH-6212-ECB-LH

Manaras Opera-SH 1/2 HP 240V 1Ph with Electronic Circuit Board Left Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
Installation Manual
AVP-1

Ace Type Keyswitch with Aluminum Mounting Plate

  • Zinc Alloy Die Casted housing and Cylindrical Chrome Plated
  • Tubular key with 2 keys
  • 60 Combinations Available
  • Spring Return Type
  • Recommended for multiple dwellings
  • Contact ratings: 4 A 125V AC 2A 250V AC
    • .......more details
AVP-KEY

Cylinder Key for AVP-1

  • Key only
HCT10

LiftMaster HCTDCU Rail Only for 9'6" Door

  • Yellow zinc dichromate premium rail finish offers maximum rust protection in open-air environments.
  • Heavy-duty 12-gauge C channel corrosion resistant steel track.
  • This DOES NOT include the head unit
KNX-2

Fire Access Station with Switch

  • Fire access station with contact on microswitch
  • Closes when padlock (not included) is removed
PRO-GH-7523U-R

Micanan 3/4HP 230V 3P Gearhead Operator N1 Eyes Monitored ECB Right Hand

  • Includes 3-btn O/C/S control station Nema 1
  • External radio control terminal strip
  • Heavy duty worm gear reduction in oil bath gearbox
  • Solenoid brake standard
  • #50 roller chain and sprockets on final drive
  • Emergency chain hoist with electrical cut-out switch for manual operation
    • .......more details
Installation manualSpecification sheet
PRO-GH-7523U-L

Micanan 3/4HP 230V 3P Gearhead Operator N1 Eyes Monitored ECB Left Hand

  • Includes 3-btn O/C/S control station Nema 1
  • External radio control terminal strip
  • Heavy duty worm gear reduction in oil bath gearbox
  • Solenoid brake standard
  • #50 roller chain and sprockets on final drive
  • Emergency chain hoist with electrical cut-out switch for manual operation
    • .......more details
Installation manualSpecification sheet
36-54-200

Extension Spring 9' Door - 200 lbs

  • Clipped ends
  • 36" long 54" stretch 200 lb load
.437-6-R-C

Cut-to-Length Torsion Spring .437 x 6" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
.421-514-R-C

Cut-to-Length Torsion Spring .421 x 5-1/4" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones & filler sold seperately
  • For factory installed cones use part no. C-514-INSTALLED
.406-6-L-C

Cut-to-Length Torsion Spring .406 x 6" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones & filler sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
.393-6-R-C

Cut-to-Length Torsion Spring .393 x 6" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones & filler sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
.406-514-R-C

Cut-to-Length Torsion Spring .406 x 5-1/4" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones & filler sold seperately
  • For factory installed cones use part no. C-514-INSTALLED
.393-514-L-C

Cut-to-Length Torsion Spring .393 x 5-1/4" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones & filler sold seperately
  • For factory installed cones use part no. C-514-INSTALLED
.393-514-R-C

Cut-to-Length Torsion Spring .393 x 5-1/4" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones & filler sold seperately
  • For factory installed cones use part no. C-514-INSTALLED
.393-6-L-C

Cut-to-Length Torsion Spring .393 x 6" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones & filler sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
.393-334-L-C

Cut-to-Length Torsion Spring .393 x 3-3/4" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones & filler sold seperately
  • For factory installed cones use part no. C-375-INSTALLED
.375-6-L-C

Cut-to-Length Torsion Spring .375 x 6" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
.375-334-R-C

Cut-to-Length Torsion Spring .375 x 3-3/4" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-375-INSTALLED
620-100990

Linear Heater Kit Assembly 230V Cage Style

  • Cage style heater is suited for large post mount operators (HSLG GSLG VS-GSLG SWG VS-SWG)
.363-6-R-C

Cut-to-Length Torsion Spring .362 x 6" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones & filler sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
.375-514-R-C

Cut-to-Length Torsion Spring .375 x 5 1/4" Right Hand Wound. Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-514-INSTALLED
.343-514-R-C

Cut-to-Length Torsion Spring .343 x 5-1/4" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-525-INSTALLED
  • If cones are required a filler must be added use part # FILLER
.343-6-L-C

Cut-to-Length Torsion Spring .343 x 6" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
.343-258-L-C

Cut-to-Length Torsion Spring .343 x 2-5/8" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
.331-6-R-C

Cut-to-Length Torsion Spring .331 x 6" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones and filler sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
  • For spring filler use part no. SPRING-FILLER
.331-258-L-C

Cut-to-Length Torsion Spring .331 x 2-5/8" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
.319-6-R-C

Cut-to-Length Torsion Spring .319 x 6" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch. Cones sold separatly.
  • For factory installed cones order part # C-600-Installed
.319-514-R-C

Cut-to-Length Torsion Spring .319 x 5-1/4" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch. Cones sold separatly.
  • For factory installed cones order part # C-514-Installed
.319-334-R-C

Cut-to-Length Torsion Spring .319 x 3-3/4" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch. Cones sold separatly.
  • For factory installed cones order part # C-375-Installed
.319-334-L-C

Cut-to-Length Torsion Spring .319 x 3-3/4" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch. Cones sold separatly.
  • For factory installed cones order part # C-375-Installed
.319-258-R-C

Cut-to-Length Torsion Spring .319 x 2-5/8" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch. Cones sold separatly.
  • For factory installed cones order part # C-258-Installed
.319-258-L-C

Cut-to-Length Torsion Spring .319 x 2-5/8" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch. Cones sold separatly.
  • For factory installed cones order part # C-258-Installed
.312-6-R-C

Cut-to-Length Torsion Spring .312 x 6" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
.312-334-R-C

Cut-to-Length Torsion Spring .312 x 3-3/4" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-375-INSTALLED
.312-258-R-C

Cut-to-Length Torsion Spring .312 x 2-5/8" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
.312-258-L-C

Cut-to-Length Torsion Spring .312 x 2-5/8" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
.306-6-L-C

Cut-to-Length Torsion Spring .306 x 6" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
.295-6-L-C

Cut-to-Length Torsion Spring .295 x 6" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-600-INSTALLED
.295-514-L-C

Cut-to-Length Torsion Spring .295 x 5-1/4" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-514-INSTALLED
.295-334-L-C

Cut-to-Length Torsion Spring .295 x 3-3/4" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-375-INSTALLED
.295-258-R-C

Cut-to-Length Torsion Spring .295 x 2-5/8" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-258-INSTALLED
.295-2-R-C

Cut-to-Length Torsion Spring .295 x 2" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
.295-2-L-C

Cut-to-Length Torsion Spring .295 x 2" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
.295-134-L-C

Cut-to-Length Torsion Spring .295 x 1-3/4" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
.283-334-L-C

Cut-to-Length Torsion Spring .283 x 3-3/4" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-375-INSTALLED
.283-258-L-C

Cut-to-Length Torsion Spring .283 x 2-5/8" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-258-INSTALLED
.283-2-L-C

Cut-to-Length Torsion Spring .283 x 2" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
.283-2-R-C

Cut-to-Length Torsion Spring .283 x 2" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
.283-134-R-C

Cut-to-Length Torsion Spring .283 x 1-3/4" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
.283-134-L-C

Cut-to-Length Torsion Spring .283 x 1-3/4" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
.273-334-R-C

Cut-to-Length Torsion Spring .273 x 3-3/4" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-375-INSTALLED
.273-258-R-C

Cut-to-Length Torsion Spring .273 x 2-5/8" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
.273-334-L-C

Cut-to-Length Torsion Spring .273 x 3-3/4" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-375-INSTALLED
.273-258-L-C

Cut-to-Length Torsion Spring .273 x 2-5/8" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED