Devanco Canada - Get The Right Garage Door Opener‎ and Parts

LM21XP

LiftMaster Extended Performance Fire Door Release Device

UL864 Revision 9 compliant
Programmable DIP switch delay setting - either 10 20 30 or 60 seconds delay of door release to permit passage clearance
Inputs for normally open 2- or 4-wire detectors and 4-wire normally closed detectors
Trouble and alarm relays for communication with the fire alarm control panel if required
Audible trouble sounder to indicate when the release device is not operational
On board diagnostic LEDs for easy troubleshooting
Testing function allows routine fire door testing without requiring activation of the smoke detector

Installation manual

19-5118

LiftMaster Trolley Roller Chain Pack #41 for 18ft Door

For 3/4 & 1 HP trolley operators

PRO-APTB-5011-R

Micanan 1/2HP 115V 1P Apartment Trolley Operator With Brake Contactor

Designed for use on Commercial / Industrial high cycle sectional overhead doors with standard lift tracks.
Low clearance design for apartment applications (9.5")
External radio control terminal strip
3-btn O/C/S control station Nema-1
Solenoid brake installed
Door speed 12" per second

.......more details

Installation manual Specification sheet

MD00044

Micanan Spur Gear 12B60

RA-AD-WWS-MULTI

Lynx Wireless Wall Station AD455 372 MHz

Wireless for easy installation anywhere
Controls door open-close light on-off
Programmable pet opening (Opens to a pre-selected height of 6"-30")
Vacation Slide-Lock: Disables remote transmitters keyless entries and wall stations.
10-second closing safety delay
Transmitter program button

.......more details

Programming Instructions Compatibility chart

.306-6-L

Cut-to-Length Torsion Spring .306 x 6" Left Hand Wound Red

Priced per inch - cones sold seperately
For factory installed cones use part no. C-600-INSTALLED

029-98090

T-Style UDI Replacement Door White stainless steel Pkg 029-98090

For openings within 98" w x 90" h
Hardware attached balancer assembly not included
Manufactured to exact size

SERVICE-6220

Industrial Duty Rolling Steel Non-Insulated Service Door

22 gauge
Max size: 18'4" max std. width 20'4" max std. height
Slate type: Curved
Finishes: Gray White Tan Brown or Galvanized
RAL Powder coat option in 188 colors

HDC-411-RH-CONT

Lynx Ind. Jackshaft with Hoist 3/4Hp 115V Contactor Right Hand

1/2 3/4 1HP 115-230-460 or 575V single or three phase motor capacitor start overload and under voltage protection.
Solid state circuit board Lynx-6000. Built in 1.5 second delay.
5L V-belt primary reduction #50 drive chain and sprockets.
Adjustable friction clutch magnetic solenoid brake.
Precision pillow block bearings on output shaft.
Fully driven adjustable limit switches.

.......more details

Sell Sheet

ME120-PC

Miller Edge Rigid PVC Mounting Channel Sold per Foot

2G-RIGHT

Rolling Steel 2" Curved Stamped Endlock Right Hand

Endlocks are riveted to curtain slats ends of every other slat to prevent slats from shifting laterally and to prevent curtain wear in guides.
Continuous endlocks are at both ends of every slat.
Rivets included with endlocks

SLT4-22P

Rolling Steel 3" Crowned Slat 22-ga Primed

GH503-L5

LiftMaster Gearhead with Brake 1/2HP 208/230/460V 3P L5

Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.

.......more details

Installation Manual Manuel d'Installation Sell sheet Brochure

.306-2-5/8-RH-C

Torsion Spring .306 x 2-5/8" x 144" RH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .306 ID: 2-5/8" Length: 12 ft

BOARD066R

Manaras Replacement Power Board ***No Longer Available

Used on all Manaras circuit board type operators

Installation Manual Manuel d'installation Replacement Chart Guide de remplacement

BK305

Jamb bracket J-05 #5 12 gauge

Sold by the piece
Height 3.25" Length 1.9" Width 2.45"
Bright zinc plated 12 gauge steel
2" long track mounting slot
manufactured to accept ¼” fasteners when attaching to the track and 5/16” to lag to the wall.

MX00147-OLD

Micanan Complete Clutch Kit for PRO-TB Old Style Frame

Before 2006
9" Diameter

37301

Reversing Contactor RM12 24VAC - ** NLA

No longer available.
Possible substitution # 37407

33950R

Genie Up Limit Switch Assembly 66 " Wire

For use on 7'6" rail assemblies.
For Genie Excelerator models and Overhead Overdrive models
Open / Up magnetic limit switch

766

Fasteners Flat Head Carriage Bolt 1/4-20 x 2-1/2" 1000/Box

Full length thread
Max torque = 6

K001D8073-1

LiftMaster Three Phase Relay/Power Board 230/460V (K001D8397)

For Logic 5 commercial operators
014D1279E
New part number K001D8397

1104-10FT-CHARC

Residential Side & Top PVC Weather-Strip with cap 10' Long - Charcoal (H)

Charcoal rigid vinyl retainer with charcoal flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

41AC050-2

LiftMaster Electronic Circuit Board Assembly 315MHz

Fits 3265 PD612C
Replaces 41AC150-2 (board only - need to install on exisiting panel)
Also known as 41AC050 41AC050-2M

25-10301

Truck Door Heavy-Duty Cable Anchor Bracket Black for Whiting Roll-Up Doors

Steel construction
Allows proper rotation of cable head
Cross ref: Whiting 5803

CARX-20

EMX Accessory Access Card 5404-1

3.4" x 1.2" x 0.1" (ISO standard size)
Reinforced for long life
Mifare 26 bit Wiegand Format
Durable access card for use on the CR-2000 and PRX-320
Easy and convenient use - just swipe in front of sensor
Secure and can be disabled individually at any time

.......more details

1005-1-3/4-12

Aluminum Bottom Retainer U-Shaped

For door thickness 1-3/4"

BK010

Commercial Top Bracket Adjustable 1-Bolt Sold per Piece

Galvanized steel
12 gauge roller carrier and base plate
Adjustment of 7/16" minimum to 2-3/16" maximum
Good for use with 3" hardware

MDR-2

Linear 2-Channel MegaCode Receiver 318 MHz *** Discontinued

Activates two devices
Wire lead antenna
Mounting bracket supplied
Memory: storage for up to 10 MegaCode transmitters
Power: 24 VAC/VDC
Codes: 1000000+ (MegaCode format)

.......more details

Programming Instructions

7FT-RAIL-CHAIN

LiftMaster 7' chain drive rail 1707LMC - colour code: Green

#48 chain size
Price reflects cost if purchased with an opener

ME123-YELLOW-RH

Miller Edge Yellow Right Hand Outlet 2-Wire 2" wide x 1-1/2" high Sold by the Foot

Electromechanical slide in edge for sectional doors and sliding gates.
Touch sensitive singaling allows for immediate stopping and reversing of motion
Temperature range: -30F to 155F
Lead wire: 22 gauge universal
Sensitivity: nominal 6-8 PSI
2 wire NO configuration

.......more details

Installation Manual Worksheet Sell Sheet

.192_2"-LH

Torsion Spring .192 x 2" x 12ft LH Silver

Wire size: .192
Inside diameter: 2"
Length: 12 ft

MK00066

Reversing Contactor Allen Bradley 24V coil

Allen Bradley no. 104-C16KJH22-X6
Cat. no. 100-C16*10

R-831-E

FL-Allstar 1-Door O/C/S Receiver 110554-311 MHz

Commercial Open/Stop/Close receiver for one door.
If your operator can be controlled by three button station then the R-831-E receiver and commercial remote controls will work with your operator.
It is easy to set with its learn feature (no coding switch).
This receiver can accept up to 8 different operational codes.
Manufacturer's model number: 190-110554
Dimensions: 6 1/4" x 3 5/8" x 1 3/4"

.......more details

Programming Instructions

17300

Doorlec DC-3000T3 3-btn Transmitter 313 MHz

One block of 10 dip-switches for programming
Will activate 3 Doorlec 17307 receivers (DC-3000R)
Includes visor clip and 9V battery

Programming Instructions

MJ00014

Micanan Brake Shoe and Drum Assembly for Gearhead

For Micanan gearhead models: GH GHC GSD
Assembly includes both right & left shoe and the drum

CP-CRG-NEW

Lynx Auto Re-Connect Carriage 14-1/2" Arm Sold Separately

Will work on most brands of commercial trolley operators using 2" angle tracks.

SEA433

Erone Tuned Antenna 433MHz

Increase reception and/or range
11.5ft (3.5m) coaxial cable (RG 58) included
L-Shaped bracket for wall-mounting

Wireless System Chart

OPH-6533-ECB

Manaras Opera-H 3/4HP 600V 3Ph with Electronic Circuit Board

A heavy-duty industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a self-engaging chain hoist for manual operation
Clearence: side room required 15"

Installation Manual Sell Sheet

TIMER031

Manaras Timer 24/240V 1s-100h *** To Extent of Inventory

This timer-to-close can be added to any Commercial garage door opener.
Use with RELAY022 (8-pin base) if required.
Schneider Elect. part no. RE88867215

Adding a timer

DRUM005

Manaras Steel Brake Drum 5/8" - replaces DRUM004

Replaces DRUM004
Brake drum with edges for current braking systems (2000 - current)
Used on all Manaras operators except Gear Head models.
Use with BRAKEPART019 (old part BRAKEPART017)

MDTK

Linear MegaCode Wireless Keypad 318 MHz *** To extent of Inventory Repl. by LPWKP-G

Activates multiple MegaCode receivers
User selects 1 to 6 digit PIN number or 1 to 6 letter PIN name
Programming is easy via the keypad; MegaCode receiver auto-learns PIN
Backlit keys for easy viewing
Wall mounting hardware (2 screws and anchors) supplied
Power: 9-volt battery included

.......more details

Programming Instructions

8833TC-OCS

Allstar 3-btn 3-Door O/C/S Transmitter 109025 318 MHz ***Replaced by P-8833TC-OCS

Open/Close/Stop remote for 3 doors
Compatible with 3-channel Allstar and MVP receivers
Portable transmitter
Easy access to battery and coding switch
Slide switch selects door to operate
Power: 9-volt battery

.......more details

Programming Instructions

218014-02

Lamp Socket Assembly

For models LSO LCO LDO

200BL

2" Light Brush Insert 6ft Long

Polypropylene bristles
Same as model MS1703

4003-6FT

Aluminum Retainer only for Light Brush 6' Long 90 and 180 degree

For angle application (90 degree & 180 degree).
For use with Light Brush or Vinyl Insert.

1006-1-1/2-10'

Rigid Vinyl Bottom Retainer U-Shaped 10' Long

Black with flexible fin to touch door face.
For door thickness 1-1/2"

25-60050

Truck Door Latch Plate for Todco Roll-Up Doors

Steel construction Zinc plated finish
Contoured for proper lock engagement
Cross Reference: T #70093 W #4021 270700

EP2984

Exhaust Port 4" with latch long barrel ** Discontinued**

4" inside diameter 2" sleeve with latch.
Includes fasteners & gaskets.
Polished aluminum finish.

R5201

Cast Iron Pulley 3"

Bored for 3/8" diameter bolt
Cable diameter: 1/8"
Cast iron pulley mounted on two pressed sealed bearings.
Radial Load: 400lb

25-10101

Truck Door 2" Nylon Roller 3" Shaft for Whiting Roll-up Doors

Zinc plated shaft 10 roller ball design
Shaft Length: 3" Overall Length: 3.75"
Cross Reference: W #3228 T #61424 T #70225
Box quantity: 25

25-10100

Truck Door 1" Steel Roller 2.5" Shaft Length for Todco Roll-Up Doors

Zinc plated Hardened shaft and raceways
Seven roller ball design
Cross Reference: T #61174 T #69162 W #4026 W #4027 291000
Box quantity: 25

6X12PO50

Devanco Loop 6' x 12' pave-over 50' lead-in

Ideal for use on with gravel driveways or sufaces that are to be asphalted
Features a twisted lead-in to reduce the chances of interference and false detections.
Direct burial loops should be buried approximately 6" deep

Installation Instructions Instructions d'installation Spec Sheet Brochure Loop Placement Guide Guide de positionnement des boucles

SLT4-18

Rolling Steel 3" Crowned Slat 18-ga Galvanized

ALUM-5P5

Aluminum 24" x 100' Spool Graphite # 5P5

20% thicker than the aluminum sold in retail stores (0.022" )
Gentek # 5P5
Reverse side is #431 Bright White

Colour chart

K74-18382

LiftMaster Hall Effect Sensor Assembly **to extent of inventory

Formerly 76-G0541 G76G0541
For SW470 with GL or S3 Board SW490 with GL Board

CUSTOM4X6PO

Devanco Loop 4'x6' rigid-pvc pave-over

Ideal for use on with gravel driveways or sufaces that are to be asphalted
Features a twisted lead-in to reduce the chances of interference and false detections.
Direct burial loops should be buried approximately 6" deep

Installation Instructions Instructions d'installation Spec Sheet Brochure Loop Placement Guide Guide de positionnement des boucles

50195

Doorlec Front Idler Assembly with Shaft 41B9 Oilite Trolley Models

Fits all Doorlec commercial trolley operators
Same as # 50190

28103

Pillow Block Bearing Cast Iron 1" Bore

105381

Amarr T-Handle Lock Kit for 1 3/8" Thick Doors Black *** Price by quote only

includes exterior & interior locking device with keys
this item is requires for use with lock bar or cable snap latch components
Need to order 109290 which is the hardware needed for installation or the lock won't work.

25-42-200

Extension Spring 7' Door - 200 lbs Tan

Double - Loop
25" long 42" stretch 200 lb load
Sold individually
Rated for 10000 cycles
Same as part number 120

Spec Sheet

ME00007

Micanan Jackshaft Drive Shaft 1" x 15" L c/w KW

2 required per machine
Sold individually
1" x 15" long

29200

Doorlec Transformer 208V pr 120V sec 35VA

208V prImary 120V secondary 35VA

MTR1

Linear 1-Channel Visor Transmitter 318MHz *** To Extent of Inventory

Activates one MegaCode receiver
Test/operate LED
Visor mounting clip supplied
Visor clip mounts vertical or horizontal
Power: One 2032 battery
Codes: 1000000+ (MegaCode format)

.......more details

Programming instructions Instructions de programmation

PD1614B000

NICE Aluminum Flange Bar 300MM Insert For MBAR up to 7M

262670

Bircher ProLoop 2 Dual channel loop detector 24 AC/DC Din-Rail

2 Independent Loop Inputs for dual-lane detection or differentiated entry/exit monitoring
Two Configurable Relay Outputs: Allows integration with control systems for gate/door activation alarms or signal switching
Alarm Output: Enhances safety by dedicating fault outputs or loop error detection
Intuitive interface allows for a simple and fast setup Ideal for vehicle access control for gates barriers and parking systems
24V AC/DC input voltage
Din-Rail mount

.......more details

2807.200.280

Whiting .200 x 2-3/16 x 28" Curbside with Cones

SPR40B48X1

Sprocket 40B48 1" Bore 1/4" KW 2SS

48 tooth sprocket for #40 chain

PB-001

Skylink Garage Door Wall Button

Install the Skylink Wall Button inside your garage.
Allows manual operation of your garage door opener.
Illuminated LED indication.
Easy to Install.
30-foot Wire Included.
Mounting Hardware Included.

.......more details

D1101KH

DoorBird Surface-Mount IP Video Intercom SS V2A Brushed

Video intercom including surface-mounting housing
LAN connection (PoE compatible)
2-way audio
Ultra-wide angle lens 1080p night vision IR LEDs
4D motion sensor
Keypad

.......more details

D1101KH_Installation_Manual Sell Sheet

IP-MONSQ

CDVI Interior Touch Screen Monitor for IP-MDS/IP-SDS Video Intercom System (Square)

Interior 7" touch screen TFT monitor for use with the IP-MDS/IP-SDS intercom systems in white.
IP system connects through the PoE system and also has a free to download app available on iOS and Android. The VDP app allows for users to connect with visitors at the door station and can control the door locks remotely.
Square shape (available in rectangular shape: IP-MON)
SIP Server
Operating temperature: -10C to 55C
Call recording and built-in memory

.......more details

LZR-MICROSCAN1T

BEA LZR Microscan Kit 1 Door with 2 Microscans Hub & Cables

Laser-based sensor system for automatic swing doors.
Time-of-flight technology used to eliminate the limitations of infrared-based devices.
Background independence eliminates nuisance detections caused by changing conditions while gyroscopes sense the movement of the door for accurate positioning.
Provides asjustable pattern depth.
Min/max door width: 20"-48" from leading edge of sensor LED
Mounting height: 75"-98" from finished floor to sensor LED

.......more details

R2T

Erone Radium Mini 2-Button Transmitter 433MHz

The RADIUM remotes are compatible with all standard 433 MHz RADIUM wireless receivers.
They have been designed with a high security coding system (KeeLoq® Hopping code).
A special algorithm ensures a continuous synchronization between the receiver and transmitter
Range up to 820 ft (250 m)
Two CR2016 batteries included

Wireless System Chart

SETR2641AM2KP

Erone 2-Channel Mini Transmitter with Paradox Tag Black 433MHz

With built-in Paradox tag
Heavy-duty construction
Elegant & easy to carry
Unobstructed range: 656 ft (200m)
60 x 36 x 16mm (2.35 x 1.4 x 0.6in)
Two lithium batteries (CR2016) included

.......more details

Wireless System Chart

41D3485

LiftMaster Chain Kit 10'

For use with various chain drive garage door openers that utilize a T-rail and have a 10' garage door
Same as 041D3485

15-50B32QGH

Sprocket 50B32 1.25 Bore 1/4" w/SS

71-1550B32QGH is a 32 Tooth Sprocket Kit 1-1/4" Bore x 1/4" keyway (50B32-114)
For use with various LiftMaster® Logic 4.0/5.0 and MAXUM DC Standard-Duty and Industrial-Duty Commercial Door Operators

LPEXP

LiftMaster CAPXL Loop Detector Input Board

Automatically trigger a phone call to a guard or office when a guest arrives
Mounts inside of CAPXL
Works with CAPXL and LOOPDETLM Plug In Loop Detector (Each sold separately.)
Operating Temperature -20°F to 130°F (-29°C to 54°C)
Dimensions: 2.8” x 2.3”

CAPXSTKPL

LiftMaster Trim Kit with Postal Lock for CAPXS

Trim plate with integrated postal lock cover exclusively for installing with Model CAPXS – Smart Video Intercom S
Pre-Wiring included for postal lock device (not included).
Provides a clean aesthetic installation when the application calls for a postal lock while also helping hide remnants of a previous installation
Dimensions: 14” x 6.5” x 1.4”

RENO-BX4

RENO 11-Pin Amphenol Style Connector 12-24V Single Channel Loop Detector

The Model BX is a full featured single channel dual output vehicle detector that incorporates the reliable vehicle detection technology found in all of Reno A & E s vehicle detectors.
Eight detection sensitivity levels are selectable by means of a front panel mounted rotary switch external dip switches
Dimensions: 11-Pin Models - 3.00 inches (7.62 cm) high x 1.75 inches (4.45 cm) wide x 4.30 inches (10.92 cm) deep

Installation Manual Sell Sheet

K41-0157-000

LiftMaster Cable Tension Monitor Right Side

For use with various LiftMaster® MAXUM Series DC 700 lbs. to 2200 lbs. Standard-Duty and Extended-Duty Jackshaft Jackshaft Hoist and Trolley Commercial Door Operators
This service kit is compatible with the following MAXUM models: JDC JHDC and TDC.
NOTE: Refer to K41-0156-000 for Left-Side Cable Tension Monitor

BEA-10LIGHT-TBASE

BEA Modular LED Signal Base

To be used with the BEA-10LIGHT modules.

User Guide Datasheet

41151R

Genie Light Kit Wall Mount

Bluetooth Light Assembly for the Genie #6070 & 6170 Wall Mount garage door opener.
Replacement light kit for 39945R

DS75-INSULATED

Light Commercial Insulated Rollup Door with Exterior Curtain Lock ** Price by Quote Only

Mini Storage door non insulated with exterior curtain lock
Custom ordered to exact size

FAAC-SPEC-ORDER

FAAC Special Order Gate Product Price by Quote Only

Ordered to customer's specs

18205

Wiring Harness 66" long

For use with Rite-Hite dock levelers

OHJ-6113-M-N1-RH

Manaras Heavy-Duty Jackshaft Operator 3/4 HP 120V 1 Ph Monitored ECB w/N1 Photoeyes RH

25 cycles per hour 100 cycles per day
An Industrial duty operator featuring both the patented Hoist-a-Matic a self-engaging chain hoist for manual operation as well as a floor level disconnect
Specifically designed to motorize grills when a manual egress is required
Mechanical brake
Hoist on right standard
Full overload protection

.......more details

SETR2641AM1AN-C

Erone 2-Channel Mini Transmitter Grey 433MHz Proprietary Encoding

Heavy-duty construction
Elegant & easy to carry
Light grey and blue base with grey buttons
Unobstructed range: 656 ft (200m)
60 x 36 x 16mm (2.35 x 1.4 x 0.6in)
Two lithium batteries (CR2016) included

.......more details

Wireless System Chart

SP10W12V

LiftMaster Solar Panel Kit 12V 10W

Includes: (1) 10 Watt 12 Volt solar panel
Mounting bracket

E/1929/069

Automatic Systems Round Arm Ass'y 13' (BL229)

Used on the BL229 gate op.

110001-BULB-PER-FT

Janus T-Bulb Astragal Black Sold per Foot

Fits Janus mini storage doors M650
Bottom weather seal only no retainer

10TD900INDHH4

BEA 4-Button Digital Transmitter Nema 4 900 MHz

Compact transmitter allowing wireless activation of any door control providing greater line-of-sight distance than legacy wireless frequencies.
It also provides better penetration of obstacles.
IP65
Operating temperature: -10 to 55C
Controls one 10RD900 receiver

CRBH501L5-LH

LiftMaster 1/2 HP 115/230 VAC 1 PH Commercial Hoist Operator Logic 5 with Carwash Modification

H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door.
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.

.......more details

GDI-LG910

GDI Jackshaft & Trolley JDMG-LG-2030 Nerma 1 UL325 Photo Eyes Extra

Low Headroom at 4-3/4" (Trolley)
Dimensions: 11.35" x 4.3" x 4.3"
Motor type: Brushless DC
Max cyles: Open/Cose per day = 3200
One operator can handle all AC voltages - Single phase and three phase
No maintenance GearMotor sealed stainless steel bearings no limit switches no belts or hydraulic cylinders to maintain

.......more details

Q003

LiftMaster Chain Tensioner Bolt w/2 nuts K07-50637

This replacement kit is most commonly used to tighten the attached chain on the sliding gate

TODCO-DOOR-USA

Todco Special Order Plywood Core Dry Freight Door Price by Quote Only

TODCO patented the Transportation Core™ a 3/4" 7-ply premium-grade plywood that forms the foundation of the door.
It has a hardwood outer veneer that virtually eliminates wood grain "telegraphing" giving a smoother more uniform look that lasts.
The TOUGHSHELL® system is a multi-layered formulation of liquid polymers that are specifically designed to work together on wood substrates and provide a state-of-the-art defense against moisture abrasion temperature extremes harsh chemicals even UV damage
Standard on all TODCO Dryfreight and TODCOLD® doors only EverWare™ rivets give you the protection of stainless steel – without the cost.

MRIN

LiftMaster Base Riser Mount for industrial operators

Works with LiftMaster IHSL24UL and INSL24UL slide gate operators
Provides a base-mount option instead of post-mounting the operators

Installation manual Manuel d'installation Retrofit guide Guide d'installation

DC500-100

Dyna-Hoist DC Series Direct Drive Opener 1/2 HP 110/240V 1ph ** Price by Quote Only

The direct drive operator consists of a DC electric motor directly coupled to a hollow shaft (30:1 reduction) worm gear reducer designed to install over keyed door shaft.
Continuous duty 0.5 HP 90 V DC 1750 rpm motor suitable for 110 to 240 V 1 PH and 60 Hz power supply.
Comes with integral absolute encoder to control the door travel
24 V 5 amps back-up battery pack and 3/8” ratchet socket to accept and crank for manually operating the door in case of power failure
Programmable wall mountable UL325 compliant NEMA 4X control panel with LCD display and OPEN-CLOSE-STOP buttons on cover
Nema 4 photocell

.......more details