Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login

CPT215-END-KIT-U

Miller Edge Universal End Kit for CPT215/223

  • Kit contains: 2) Caps (2) cages (1) wired plug (1) 10K plug (1) 8.2K plug (1) diode capacitor plug (1) non-mon. plug end plug (2) screws
  • This end cap will also work on the CPT223 extrusion
PDC300-1-125-40-20

Pulse300 Direct Drive Opener 1 HP 110/240V 1ph 1.25" Shaft 40:1 20' Cable ** Price by Quote Only

  • Advanced speed control: up to 24"/s opening up to 16"/s closing
  • Built-in 24V 9Ah battery backup
  • Soft start/stop functionality
  • Universal single-phase power compatibility: 110-240V 50/60Hz
  • Adjustable force monitoring
  • Programmable closing timer: 1-99s A high-performance direct-drive door operator with a 90V DC horsepowerrated motor engineered for balanced commercial and industrial doors
  • .......more details
ME120-Y-2WIRE-L

Miller Edge Yellow 2-Wire NM Left Hand Outlet Sold per Foot

  • Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
  • Touch sensitive signaling
  • Temperature range: -30F to 155F
  • Lead wire: 18 gauge 2ft length
  • Sensitivity: nominal 4 PSI
  • 2 wire NO configuration
  • .......more details
51-012862

Blue Giant Sensor Wand Assembly **Special Order

  • Price by Quote Only
SR-9004-WHITE

Elton Reverse Angle Clip-On Vinyl White 200ft Roll

  • Side Use – Clips onto Steel Jamb
  • Also for Residential Use
GALV-331-6-L

Cut-to-Length Torsion Spring .331 x 6" Left Hand Wound Galvanized Red/White

  • Priced per inch - cones and filler sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
  • For spring filler use part no. SPRING-FILLER
  • Galvanized
K07-8004

LiftMaster Upper Crank Link BG770/790 Barrier Gate

  • For use with BG770/790 barrier gate operator
7-6093

RW Bottom Cane Bolt 524 x 2 Zinc Plated

  • Zinc plated
MX000642

HySecurity Right Counterweight Mount for StrongArm

  • Designed for HySecurity StrongArm gates
  • Provides balanced support for gate motion
  • Precision construction for accurate alignment
  • Improves performance and reduces wear
O02R9506

AirLift O Ring Orig. Op-AirLift

EIM-101

Miller Edge Electronic Interface Module w/Junction Box (JB-02P-W)

  • Designed for use with pre-UL325-2010 commercial door operators and Miller Edge CPT sensing edges.
  • It's a durable weather-resistant solution housed in a NEMA 4-rated junction box.
  • This module is particularly suited for overhead doors using retracting reels or coil cords
42685

Doorlec SGP Operator Cabinet Only

31120-112-3/8

Doorlec Sprocket 50B36 1-1/2" Bore 3/8" KW

  • 36 tooth sprocket
114-0298

RW Support 18 x 33

  • Size: 18 x 33
  • Material: Formed Steel 3/16" thick
  • Finish Black Enamal
2200-367

Linear Chain Tension (Light) Spring

  • Used on various Linear Gate operators
GALV-319-6-R

Cut-to-Length Torsion Spring .319 x 6" Right Hand Galvanized Blue/Green

  • Spring wire only. Cones and Filler extra
SBR-N1-0R-H120

Micanan Brake Assembly for PRO-HBH RH 120V Solenoid included

  • Solenoid Included
38001404

Tork Winch CW 1800 Curtain Winch Formally TW1200 *** Price by Quote Only

  • Special Order item
SW-500-ADAPTER

Devanco Industrial Spring Winder 500 for 3.75" - 6" Adapter for Richard Wilcox Torsion Spring Plugs

  • Adapter for SW-500 to be used with Richard Wilcox spring plugs
  • This adapter is 5 mm higher than the universal model
WHITING-RV

Whiting Stainless Steel Rivet Option for Dry Freight Door

  • Upgrade option
MOTOR318

Manaras Electric Motor 1 HP 120/240V 1Ph

  • Continuous duty C-flange TEFC 60Hz
MGH-6215-M-N1-RH

Manaras 1.5 HP 240V 1P Jackshaft Monitored w/N1 Eyes Right Hand

  • A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
  • It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
  • Electrically activated drum-band type solenoid brake
  • Full overload protection
7131

Whiting Brush Side Seal Assembly; 7/8"

  • Quote required prior to sale to ensure correct fit
DC300-CABLE-P/FT

Dyna-Hoist 5-Conductor Cable Sold per Foot Increments of 5ft- Max 25ft

  • Sold in increments of 5ft to a max of 25ft
CRHMOFE

Pentagon Crank Handle for Manual Override Flexible End *** Price by Quote Only

E/BLOP/116

Automatic Systems Anti-Corrosion Base

SPR50B42X138

Sprocket 50B42 1-3/8" KW 2SS 5/16-18

  • 42 tooth sprocket for #50 chain
GALV-343-6-R

Cut-to-Length Torsion Spring .343 x 6" Right Hand Wound Galvanized Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
26141-NEW

Doorlec Cam Shaft 11-1/4" x 5/8" (28.575 x 1.59cm)

  • Fits the new larger box
MD00027

Micanan Disconnect Coupling 3/4" ID PRO-J/LJ

  • Sold individually
OGH-6232-M-N1-RH

Manaras 1/2 HP 208V 3Ph Gear Head Operator w/Monitored ECB N1 Eyes Right Hand

  • A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
  • Includes a self-engaging chain hoist for manual operation
  • 25 cycles per hour 80 cycles a day
  • Hoist on right side standard can easily be moved to the left in field
  • Full overload protection
  • BRACKET112 must be used for wall mounting
  • .......more details
BCSI-PM21

Pivin Drapeau Flat Washer 3/8 Special *** Price by Quote Only

BCSI-PM02

Pivin Drapeau Bearing 1" FL205 *** Price by Quote Only

086565.1013.S

Overhead Door Chain RLR #25 x 62P Loop

41A3589-2

LiftMaster 10ft Belt Assembly for Models '93-2000

  • For use with LiftMaster belt drive models 1270 1280 1280R.
  • Full belt assembly
  • For use with Chamberlain belt drive models 8100 8200 and 9200.
  • For standard 10 foot high garage doors
  • T rail assemblies ONLY.
GALV-393-6-L

Cut-to-Length Torsion Spring .393 x 6" Left Hand Wound Galvanized Orange Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
  • Galvanized
GALV-375-334-R

Cut-to-Length Torsion Spring .375 x 3-3/4" Right Hand Wound Galvanized Yellow/Green Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-334-INSTALLED
  • Galvanized
GALV-319-334-R

Cut-to-Length Torsion Spring .319 x 3-3/4" Right Hand Wound Galvanized Blue/Green

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-334-INSTALLED
  • Galvanized
GALV-331-258-L

Cut-to-Length Torsion Spring .331 x 2-5/8" Left Hand Wound Galvanized Red/White

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
  • Galvanized
GALV-306-258-R

Cut-to-Length Torsion Spring .306 x 2-5/8" Right Hand Wound Galvanized Red Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
GALV-283-334-L

Cut-to-Length Torsion Spring .283 x 3-3/4" Left Hand Wound Galvanized White Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-334-INSTALLED
K41-0377-000

LiftMaster 24VDC Motor Gear Box Encoder (Trolley 700)

  • Maxum T-700
202-0003

TNR Knock-Away Plate (Lasercut) for 10lb/ft Bottom Bar **** Price by Quote Only

44-60-160

Extension Spring 10' Door - 160 lbs

  • Clipped ends
  • 44" long 60" stretch 160 lb load
CAPXSTK

LiftMaster Trim Kit for CAPXS

  • Trim plate exclusively for installing with Model CAPXS – Smart Video Intercom S
  • Provides a clean aesthetic installation helping hide remnants of a previous installation.
OSH-6434-M-N1-RH

Manaras Opera-SH 1 HP 480V 3 Ph Monitored Board w/N1 Eyes Right Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
  • .......more details
MD-00242

Sprocket 41B14 x 3/4"

RSH-6814-MON-LH

Manaras Rapido Jackshaft Operator 1 HP 208V 1PH W/ Elect. Board N4X Thru Beam Eyes LH

  • High speed heavy-duty v-belt drive industrial operator.
  • Designed for use on properly counter-balanced standard high and vertical lift sectional doors weighing a maximum of 750 lbs.
  • Two times the speed of the standard jackshaft operator
  • Manages soft-starts and soft-stops
  • Can be wall or shelf mounted on either side of the door
  • Cast iron pillow block bearings
  • .......more details
MOUNTSHAFT013

Manaras Hoist Shaft Kit for GH GHW/C/X MGH MGHW/C/X

  • 5/8D15LG
6200-2-7-SEALED

Roller 6200 Sealed Bearing 2" White Nylon 5.96" Long Stem

  • 2" diameter white nylon tire
  • 6200 sealed precision bearing
  • Zinc plated 7.04" Overall Length 5.96" stem
  • Rating: 100lb; 100000 cycles of a 12′ door
70598.000

Todco 1" Nylon WondeRoller

  • Special Order Item
  • Perfect for dry freight applications this roller has been tested to last 5 - 10x longer than a standard roller.
  • A fully sealed bearing to keep dust and debris out
  • 2 Inch Track WonderRoller is a nylon-coated-stem track roller for larger application panel truck doors
  • Polymer vinyl roller head couples with this stem to suit the constant up-and-down and roadway jostling on a freight or other large truck
  • Roller prevents build up in bearings with a sealed external washer
  • .......more details
41B5348-2

LiftMaster Socket and Hub Kit 8360/8360W

  • Compatible with LiftMaster® Models 8360/8360W Chain Drive Garage Door Openers
GALV-343-258-144-R

Torsion Spring .343 x 2-5/8" x 12ft RH Galvanized Blue/Red

  • Wire size: .343
  • Inside diameter: 2-5/8"
  • Length: 12 ft
  • Galvanized
GALV-306-258-144-R

Torsion Spring .306 x 2-5/8" x 12ft RH Galvanized Red

  • Wire size: .306
  • Inside diameter: 2-5/8"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-283-334-144-L

Torsion Spring .283 x 3-3/4" x 12ft LH Galvanized White

  • Wire size: .283
  • Inside diameter: 3-3/4"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-234-258-144-L

Galvanized Torsion Spring .234 x 2-5/8" x 12ft LH Blue/White

  • Wire size: .234
  • Inside diameter: 2-5/8"
  • Length: 12 ft
BEA-10LIGHT-TG

BEA Modular LED Signal Light Segment Green

  • Signal lights for industrial and vehicle flow management applications.
  • LED signal modular lights offer customizable configurations with “build-your-own” lighting elements that share a common base and bracket.
  • These LED signal units are available in red green yellow and an audible alarm cap and can be stacked in a tower configuration with up to six modules.
  • Operating temperature: -40 to 122F
  • Nema 4/IP65
  • Base sold separately
  • .......more details
DS75-INSULATED

Light Commercial Insulated Rollup Door with Exterior Curtain Lock ** Price by Quote Only

  • Mini Storage door non insulated with exterior curtain lock
  • Custom ordered to exact size
2200-886

Linear Sprocket 50B20 1" Bore 3SS

2400-407

Linear Ste Screw Brass Tip 5/16-18x5/16

E/1929/066

Automatic Systems Balance Spring Ass'y 7.0 MM BL229

  • Used on the BL229 gate op.
EHJX-353-1

Doorlec Industrial Jackshaft Op. Explosion Proof 1 HP 575V-3Ph ** Price on Request

  • Explosion proof NEMA 7/9 Heavy-Duty Industrial Operator
  • DC-2000 logic with adjustable Timer To Close Delay On Reverse.
  • Solenoid Brake prevents coasting and secures the door when closed
  • Explosion-proof (sealed) continuous-duty electric motor with overload protection
  • Automatic Friction Clutch protects the door and operator
  • Self-aligning Heavy Duty sealed Pillow Block bearings on all shafts for high cycle applications
  • .......more details
GH755L5-LH

LiftMaster Gearhead with Brake 3/4HP 575V 3P L5 Left Hand****NLA

  • Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
  • GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
  • MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
  • Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
  • Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.
  • .......more details
2200-983

Linear Brake and Puck HSLG *** No Longer Available Replaced by 2200-983-UPS

50220

Doorlec Lifting J-Arm Assembly Trolley

2100-765

Linear Shaft Pulley HSLG

2200-309

Linear Double Pulley 7" 5/8" Bore

1104-18FT-CHI-CRM

Residential Side & Top PVC Weather-Strip with cap 18' Long - CHI Cream (C-C)

  • Cream rigid vinyl retainer with cream flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
  • CHI compaible colour
  • Full case quantity only (12).
GALV-375-6-144-LH

Torsion Spring .375 x 6" x 12ft LH Galvanized Yellow/Green

  • Wire size: .375
  • Inside diameter: 6"
  • Length: 12 ft
  • Galvanized
SHAFT117

Manaras Output Shaft for OSH

GALV-363-334-144-L

Torsion Spring .363 x 3-3/4" x 12ft LH Galvanized Green/White

  • Wire size: .363
  • Inside diameter: 3-3/4"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-262-2-144-L

Torsion Spring .262 x 2" x 12ft LH Galvanized Red/Yellow

  • Wire size: .262
  • Inside diameter: 2"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-363-6-L

Cut-to-Length Torsion Spring .363 x 6" Left Hand Wound Galvanized Green/White Price per Inch

  • Priced per inch - cones & filler sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
GALV-363-6-R

Cut-to-Length Torsion Spring .363 x 6" Right Hand Wound Galvanized Green/White Price per Inch

  • Priced per inch - cones & filler sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
GALV-262-2-R

Cut-to-Length Torsion Spring .262 x 2" Right Hand Wound Galvanized Red/Yellow Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
GAREX-PAINT-R12-WHTE

Garex Touch-Up Paint White for R12

2705.148_140

Whiting Curbside Torsion Spring for Cube Truck Roll-Up Doors 14" Long

  • Most common torsion spring for cube trucks
  • Specs: .148 x 2-3/16" x 14" Long
  • For Roadside order part # 2704.148*140
2704.148_140

Whiting Roadside Torsion Spring for Cube Truck Roll-Up Doors 14" Long

  • Most common torsion spring for cube trucks
  • Specs: .148 x 2-3/16" x 14" Long
  • For Curbside order part # 2705.148*140
K94-36408-2

LiftMaster Reset Switch LA400 with ID Resistor

  • For use with LiftMaster LA400 Series swing gate operators
  • Includes ID resistor kit
  • Includes LA400 product ID
VBELT_4L390

VBelt 4L 1/2" x 39" A37

MV00164

Nice AB 42GRL 9000-THRU-BEAM PHOTO Emitter 24V

OGH-6533-M-N1-LH

Manaras 3/4 HP 600V 3Ph Gear Head Operator Monitored ECB w/N1 Eyes Left Hand

  • A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
  • Includes a self-engaging chain hoist for manual operation
  • 25 cycles per hour 80 cycles a day
  • Hoist on right side standard can easily be moved to the left in field
  • Full overload protection
  • BRACKET112 must be used for wall mounting
  • .......more details
C12/5-BLADE

Felco Replacement Blade FC12/5 Single Blade

  • Single balde only for FC12 cutter
GDI-HB331

GDI Direct Drive & Jackshaft HAML-RBH-2030 Nema 1 To Accept 1-1/4" Shaft Non Monitored

  • Compact & Light Weight - Fast Installation
  • Applications Include Car Wash Cold Storage Pharmaceutical Agricultural Food Facility Sectional Grilles and Rolling Steel Doors
  • Brushless DC High Reliability Hi Efficiency & Low Maintenance Motor
  • No maintenance GearMotor sealed stainless steel bearings no limit switches no belts or hydraulic cylinders to maintain
  • One Operator Handles all AC Voltage Applications (115/208/230/460 & 575V)
  • Soft start soft stop
  • .......more details
2806.162.220

Whiting .162 x 2-3/16 x 22" Roadside with Cones

GDI-HB340

GDI Direct Drive & Jackshaft HAML-RBH-A830 Nema 4 To Accept 1" Shaft Non Monitored

  • Compact & Light Weight - Fast Installation
  • Applications Include Car Wash Cold Storage Pharmaceutical Agricultural Food Facility Sectional Grilles and Rolling Steel Doors
  • Brushless DC High Reliability Hi Efficiency & Low Maintenance Motor
  • No maintenance GearMotor sealed stainless steel bearings no limit switches no belts or hydraulic cylinders to maintain
  • One Operator Handles all AC Voltage Applications (115/208/230/460 & 575V)
  • Soft start soft stop
  • .......more details
GDI-LG910

GDI Jackshaft & Trolley JDMG-LG-2030 Nerma 1 UL325 Photo Eyes Extra

  • Low Headroom at 4-3/4" (Trolley)
  • Dimensions: 11.35" x 4.3" x 4.3"
  • Motor type: Brushless DC
  • Max cyles: Open/Cose per day = 3200
  • One operator can handle all AC voltages - Single phase and three phase
  • No maintenance GearMotor sealed stainless steel bearings no limit switches no belts or hydraulic cylinders to maintain
  • .......more details
GDI-HB321

GDI Direct Drive & Jackshaft HAML-RBH-A830 Nema 4 To Accept 1-1/4" Shaft UL325 Photo Eyes Extra

  • Compact & Light Weight - Fast Installation
  • Applications Include Car Wash Cold Storage Pharmaceutical Agricultural Food Facility Sectional Grilles and Rolling Steel Doors
  • Brushless DC High Reliability Hi Efficiency & Low Maintenance Motor
  • No maintenance GearMotor sealed stainless steel bearings no limit switches no belts or hydraulic cylinders to maintain
  • One Operator Handles all AC Voltage Applications (115/208/230/460 & 575V)
  • Soft start soft stop
  • .......more details
LJH-383-1/2-RH

Doorlec 1/2 HP 208V 3PH Jackshaft Operator Right Hand

  • Heavy duty industrial type control station open close stop 24V. control circuit
  • Universal mounting right or left
  • Floor level disconnect device electrical and mechanical
  • Emergency chain hoist operation on LJH model only
  • Colour code wiring diagrams
  • Rotary type limit switches readily adjustable in both directions
  • .......more details
K74-39295-2

LiftMaster E-Box UL325 SL585

  • K74-39295-2MC is a Electrical Box Replacement Kit with UL325 Safety Standards and Compliance Regulations
  • For models SL585503UL SL585103UL
586-1072

Serco 3/4" dia x 2-1/8" Grooved Pin ** Price by Quote Only

  • For Serco loading docks
41D0598-1

LiftMaster U Bracket Adaptor

  • Also known as: 062314 12D598-1 12D598 41D598-1
  • For use with various Chamberlain® Belt Drive and Chain Drive Garage Door Openers and square rail assemblies
Q003

LiftMaster Chain Tensioner Bolt w/2 nuts K07-50637

  • This replacement kit is most commonly used to tighten the attached chain on the sliding gate
ZAP-8070

Zap Auto Lock 8070 ***QUOTE ONLY

  • 8070 Auto-Lock provides integrated security with an electronic solenoid locking system that releases a shoot bolt above a roller when door is stopped and withdraws prior to door operation
LVB820-11/P1

Laminated Bumper Black 8" Projection Vertical Installation 20" x 11" Sold Individually Style P1

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
  • .......more details
2704.156_180

Whiting Roadside Torsion Spring for Cube Truck Roll-Up Doors 18" Long

  • Most common torsion spring for cube trucks
  • Specs: .156 x 2-3/16" x 18" Long
  • For Curbside order part # 2705.156*180
HA-112-14G-22

Horizontal Angle 1-1/2 x 1-1/2 x 22" Flag Angle 14-Ga

69987.3072

Todco Original Bottom Seal Reefer Cut to Size ** Special Order Item Price by Quote Only

  • Fits Serial #30662431-1
MD-00142

Sprocket 410B17 3/8" Bore NO KW 2SS

21-7575-1

LiftMaster Transformer 575V 3 PH

  • For use with various LiftMaster® Logic 5.0 NEMA 4 and 4X Commercial Door Operators