Devanco Canada - Get The Right Garage Door Opener‎ and Parts

SPRING043

Manaras Compression Spring

Used on OSH OPH waterproof with brake

PRO-HB-5038U-LH

Micanan 1/2HP 380V 3P Hoist Op. with Brake N1 Eyes Monitored ECB Left Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake included
On-Board receiver holds up to 20 transmitters

PRO-J-10043-U-LH

Micanan 1HP 460V 3P Jackshaft Monitored ECB N1 Eyes Left Hand

On board receiver with antenna
Continuous duty industrial motor with overload protection
Heavy duty 5L V-belt
Adjustable friction clutch
Solenoid brake (optional PRO-JB) recommended for large doors
3/4" permanently lubricated & sealed precision ball bearings on pulley shaft

.......more details

Specification Sheet

SEL2681R868-Z2

Erone 2-Relay Stand Alone Receiver 868MHz

Wireless System Chart

MV-00004

Micanan 2-btn O/C Nema-1 Pushbutton Control Station

Flush mount

MD-00425

Sprocket 60B18 x 1" Bore 1/4" KW

PHOTO-008E1

Manaras Non-Monitored Photoelectric Cells Nema 1 5-45' Range

Thru-Beam type

.319-514-R

Cut-to-Length Torsion Spring .319 x 5-1/4" Right Hand Wound Blue/Green

Priced per inch. Cones sold separatly.
For factory installed cones order part # C-514-Installed

PRO-J-7543-U-RH

Micanan 3/4HP 460V 3P Jackshaft Monitored ECB N1 Eyes Right Hand

On board receiver with antenna
Continuous duty industrial motor with overload protection
Heavy duty 5L V-belt
Adjustable friction clutch
Solenoid brake (optional PRO-JB) recommended for large doors
3/4" permanently lubricated & sealed precision ball bearings on pulley shaft

.......more details

Pro J Manual Specification Sheet

PRO-J-5083-U-LH

Micanan 1/2HP 208V 3P Jackshaft Monitored ECB N1 Eyes Left Hand

On board receiver with antenna
Continuous duty industrial motor with overload protection
Heavy duty 5L V-belt
Adjustable friction clutch
Solenoid brake (optional PRO-JB) recommended for large doors
3/4" permanently lubricated & sealed precision ball bearings on pulley shaft

.......more details

Specification Sheet

PRO-GT-15011-U

Micanan 1-1/2HP 115V 1P Worm Gear Trolley Operator N1 Eyes Monitored ECB

On-Board receiver holds up to 20 transmitters

PRO-GT-10043-U

Micanan 1HP 460V 3P Worm Gear Trolley Operator N1 Eyes Monitored ECB

PRO-GT-7523-U

Micanan 3/4HP 230V 3P Worm Gear Trolley Operator N1 Eyes Monitored ECB

PRO-GT-7581-U

Micanan 3/4HP 208V 1P Worm Gear Trolley Operator N1 Eyes Monitored ECB

PRO-T-5023-U

Micanan 1/2HP 230V 3P Trolley Operator N1 Eyes Monitored ECB

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#410 roller chain on 1/2 HP models
Monitored board
On-Board receiver holds up to 20 transmitters

MB-05504

Micanan Electric Motor Only 2 HP 575V 3PH C-Flange TEFC 56C

Fits GT GH GHC & GSD

60-7248-SC6

Wheel Chock Safety Pkg incl'd: alum. chock wall bracket 15' chain 3/8" x 1 7/8" anchors (4) & 3/16" quick links (2)

System Includes (1) SC-6 Chock Bracket Tie Back Chain English and French Caution Signs and (4) Wall Bracket Anchors
Excellent Surface Grip on Tire and Ground
Lightweight Aluminum
Size: 6" wide x 6-1/2" long x 6" high

60-7248-CC07

Wheel Chock Safety Pkg incl'd: cast alum. alloy chock wall bracket 15' chain 3/8" x 1 7/8" anchors (4) & 3/16" quick links (2)

System Includes (1) CC-07 Chock Bracket Tie Back Chain English and French Caution Signs and (4) Wall Bracket Anchors
Reversible Chock Design
One-Piece Cast Construction
Cast Aluminum Alloy
Size: 10" Base x 9" high x 6-1/4" wide

HRB-8

High Riser Bracket for 7" Above Dock or Higher 8"

High Riser 8" Riser Bracket for 7" Above Dock Door or Higher
Also available with 2" 3" & 4" Extensions or with Cutout - Call for More Information

M-30

Molded Rubber Bumper Black 30" L x 10" W 4" Projection 3-Hole Sold Individually

Manufactured from reinforced prime rubber
Rectangular horizontal mount
Ideal for light traffic loading docks.
Perfect protection for in-plant wall protection from forklifts and other material handling vehicles molded bumpers will not warp rust rot or harden.
Bumper comes with 3 pre-drilled countersunk mounting holes drilled to accept 3/4" anchor bolts
30" L x 10" W 4" Projection

.......more details

ME00071

Micanan Idler Shaft PRO-APTC

LB910-14

Laminated Bumper Standard Black 10" x 14" 9" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LB812-12

Laminated Bumper Standard Black 12" x 12" 8" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

TB410-24SF

Steel Faced Laminated Bumper Black 10" x 24" 5 1/4" Projection Horizontal Installation

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required
“Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

K75-36914

LiftMaster Electrical Box Cover APT T GT SD GSD GH - L5

LVB630-11

Laminated Bumper Black 6" Projection Vertical Installation 30" x 11" Sold Individually

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LB610-24

Laminated Bumper Standard Black 10" x 24" 6" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LB610-18

Laminated Bumper Standard Black 10" x 18" 6" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LB412-36

Laminated Bumper Standard Black 12" x 36" 4" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 1” diameter.

.......more details

LB412-18

Laminated Bumper Standard Black 12" x 18" 4" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 1” diameter.

.......more details

LB412-14

Laminated Bumper Standard Black 12" x 14" 4" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 1” diameter.

.......more details

K10-36183

LiftMaster Battery Tray for 33AH Batteries

For use with LA500

VWS-34-DARK-OAK

Screw Colored for Vinyl Weatherstrip #8 x 3/4" 1000/Box Dark Oak

Pan head

PRO-HBH-5083U-LH

Micanan 1/2HP 208V 3P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Left Hand

1/2 HP208V 3 PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
N-1 Through-beam (MK-00649) photocells included. Other options available.
3-btn O/S/C (02-103) wall control station included
Adjustable Friction Clutch 5L320 drive belt
#50 Roller chain 18 tooth door sprocket included

.......more details

MP-00002-110V

Micanan Apartment Feature: Timer-to-Close Function and Light Control Modification only

Controlling action of two lights- sockets supplied on cover

5001-16-WHITE

Residential Side & Top Weather-Strip 16' Long - White

Painted aluminum retainer with flexible dual fin vinyl.
Residential use.

5001-7-WHITE

Residential Side & Top Weather-Strip 7' Long - White

Painted aluminum retainer with flexible dual fin vinyl.
Residential use.

26CW94323-CUT

Truck Door Bottom Panel with Seal (13" x Cut-To-Size Painted White for Whiting Dryfreight

These panels are cut to customer's specifications
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
These panels have no routs and shipped without holes.
3/4" thick 7 ply exterior grade medium density plywood.
Painted white
Comes only with bottom retainer and seal (installed)

.......more details

91-00700

Truck Door Elevator Bolt 1/4"- 20 x 1-3/4" 1" head

Zinc plated finish

7001-8-BRONZE

Commercial Side & Top Weather-Strip 8' Long - Bronze (BZ)

Bronze galvanized steel with bronze dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.
Full case quantity only (20)

26CW94322-CUT

Truck Door Bottom Panel with Seal (12" x Cut-To-Size) Painted White for Whiting Dryfreight

These panels are cut to an extra wide width to fit wider vehicle applications.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
These panels have no routs and shipped without holes.
3/4" thick 7 ply exterior grade medium density plywood.
Painted white
Comes only with bottom retainer and seal (installed)

.......more details

MD-00189

Micanan Roller Chain Waterproof #41 Sold by the Foot

.207-3-7.5-LHW

Mini Storage Spring .207 x 3" x 7.5" long Left Hand

VBELT_5L370

Manaras VBelt 5L 37" - repl. by B34

5L370

V1102-BLACK

Replacement Vinyl Only for 1102-Black 200ft Roll

Sold in 200 ft rolls only

RW-DOOR

Richards Wilcox Door Special Order

Special order as per customer's requirements

TA-2-S/L-1200

Assembled Track Set 2" Comm 14g Bracket Mount for 1-3/4" Door Std Lift 12" Radius

Includes horizontal and vertical tracks

1116633121.S

Overhead 1-btn Transmitter 312 MHz ** No Longer Available

Replaces the 1091303121.S
1 channel transmitter opens and closes 1 door
Codes using 9 dip switches with 3 positions
Battery (ALK12V) and visor clip included
Compatible with all Overhead Door 312 MHz frequency garage door openers that were manufactured before 1996.

PRO-TB-7511-E

Micanan 3/4HP 115V 1P Trolley Operator with Brake NM ECB No Eyes

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#41 roller chain on 3/4 HP models
Non-Monitored board NO photoeyes

28-01114

Truck Door 1" Std Vert. Track and Angle Assbly J Style Curbside (RH) 120" Todco Style

For Todco style doors
Galvanized steel 14-gauge construction
Includes J-style channel mounting angle with track and operator bracket
Fits door sizes 101 - 114" high
Cross ref: T #49014-2 T #41034-2 & W #4045

38072020

Tie Down Chain Assembly GR 70 5/16" x 20' Hook / Hook

Boron manganese steel heat treated chain
Hook on both ends
WLL LBS : 4700

108D79

LiftMaster Light Lens 108D0079M

Replaces 108D68 and 108D68-1

MK00188

Micanan Auxiliary Contact Block

GAREX-TRACK

Garex Steel 26 ga Special Order

Special order to suit customer's needs

CP-ARM-OLD

Lynx Auto Re-Connect Carriage Arms Only New Style 20-1/2" *** Discontinued

Arms only for CP-CRG-OLD

COOKSON-45-GREY

Rolling Steel Slat 3" Cookson Insulated with Wind Locks

Special order

1104-18'-LT-BNZ

Residential Side & Top PVC Weather-Strip with cap 18' Long - Light Bronze (F) **NLA

Light bronze rigid vinyl retainer with light bronze flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.
Full case quantity only (12).

STEEL-MAN-DOOR

Pedestrian Door Steel Special Order

Made to customer specifications

PRO-H-7511U-RH

Micanan 3/4HP 115V 1P Hoist Operator N1 Eyes Monitored ECB Right Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake OPTIONAL

Installation manual Specification sheet

5001-WG-8-MOAK

Residential Side & Top Weather-Strip 8' Long Wood Grain Medium Oak with Screws

PVC wrapped
Painted aluminum retainer
Dual fin vinyl
Painted screws to match. 1 screw per foot
Sold by full case quantity (20)

K001A3200-2

LiftMaster Gate Receiver Isolation Kit

Isolates the 850LM receiver from the ground loop and prevent the fuse from blowing.

V3564-00-W-200

Vinyl Seal 4" Bottom Bead End Grey 200' Spool

Bead diameter 3/16" - 7/32" +/- tolerance

9382263800

Square Torsion Spring .375 x 6 x 38" with Cones RHW 1-1/4" Bore

MU22-2WIRE-E-B

Miller Edge MU22 2-Wire End Black - Sold per Foot

��Electromechanical edge for sectional doors and aircraft hangars. •The MU22 is a custom edge manufactured to exact specifications. •The MU22 is completely flexible and will contour to curved surfaces. It's profile can also be square rectangular or angled. •Touch sensitive signaling allows immediate reversal or stopping of motion. •Temperature range: -30F to 155F •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •Vertical or horizontal mount •ANSI/UL325 recognized component •One year warranty

Worksheet Installation manual Sell sheet

ST-PROFILE

Soft Touch Profile Sold per Foot

Yellow air-wave edge
Fits most standard 1-5/8" retainers
300 feet in a roll

ME111-2L-T2

Miller Edge Black Left Hand Outlet Monitored 7/8" wide x 1-1/2" high Sold by the Foot

Slide in style edge for barrier gate and counter shutter application.
Touch sensitive signaling allows for immediate stopping/reversing of motion depending on application. •10K ohm resistor •Temperature Range: -30F to 155F
Lead wire: AWM 22 gauge 2ft length
Sensitivity: nominal 6-8 PSI
Vertical or horizontal mount
ANSI/UL325 recognized component

.......more details

Installation Manual Worksheet Sell Sheet

PRO-H-FRAME

Micanan Frame for PRO-H

MX00145

Micanan Brake Assembly for PRO-APT Solenoid NOT included ** DISCONTINUED

Discontinued. Use part number MX00140

CPT210-C3

Miller Edge PVC Mounting Channel "L" Shape Sold by the Foot *** Disc. Repl by ME210-C3

Used on CPT-210 extrusion

7001-WG-16-DO

Residential Wood Grain Side & Top W/S Dark Oak 16' Long - Painted Screws to Match

Dark Oak retainer with Dark Oak vinyl
PVC Wrapped
Steel is Notched on Both Ends for Easier Installation
Economical
Dual Fin Vinyl
Painted Screws to Match

.......more details

7001-WG-9-DO

Residential Wood Grain Side & Top W/S Dark Oak 9' Long - Painted Screws to Match

Dark Oak retainer with Dark Oak vinyl
PVC Wrapped
Steel is Notched on Both Ends for Easier Installation
Economical
Dual Fin Vinyl
Painted Screws to Match

.......more details

7001-WG-7-DO

Residential Wood Grain Side & Top W/S Dark Oak 7' Long - Painted Screws to Match

Dark Oak retainer with Dark Oak vinyl
PVC Wrapped
Steel is Notched on Both Ends for Easier Installation
Economical
Dual Fin Vinyl
Painted Screws to Match

.......more details

7001-WG-8-CO

Residential Wood Grain Side & Top W/S Cherry Oak 8' Long - Painted Screws to Match

Cherry Oak retainer with Cherry Oak vinyl
PVC Wrapped
Steel is Notched on Both Ends for Easier Installation
Economical
Dual Fin Vinyl
Painted Screws to Match

.......more details

MD-00003

Sprocket 41B36 x 1" Bore 1/4" Keyway

2 set screw 5/16

OVERLOAD002

Manaras Telemecanique Overload 3-ph 1.2 - 1.8A

Telemecanique # LR2K0307

GH4416-04-L

Green Hinge #4 12-ga Left Hand *** to extent of inventory

A unique spring-loaded hinge that allows automatic adjustment of the door.
Provides a close tight seal of the door to the building
Green powder coat finish
For doors up to 20ft

GH4416-01-R

Green Hinge #1 12-ga Right Hand ***No longer available

A unique spring-loaded hinge that allows automatic adjustment of the door.
Provides a close tight seal of the door to the building
Green powder coat finish
For doors up to 20ft

30B530

LiftMaster Capacitor 56uF 220V ** DISCONTINUED

Same as LiftMaster # 30B620

9372054125

Square Torsion Spring .343 x 5-1/4 x 41.25" with Cones LHW

41.25" long = 160 coils

27-48-110

Extension Spring 8' Door - 110 lbs White

Single - Loop
27" long 48" stretch 110 lb load
Sold individually
Rated for 10000 cycles

Spec Sheet

H12G04-SS

Hinge #4 x 12 gauge Stainless Steel

Manufactured with 12ga. Rust-Resistant Stainless Steel
Universal Design
Fits Most Overhead Sectional Doors
Priced Per Each

KSWG-0623

LiftMaster Rear Connector with Pin for LA500DC

42-8116-1

LiftMaster Terminal Block 16-Position

6X15SC50

Devanco Loop 6' x 15' saw-cut 50' lead-in

Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
Ideal for use on existing asphalt or concrete surfaces
Features a non spliced continuous wire throughout loop turns and lead-in.
requires the use of loop sealer when being installed to ensure long lasting trouble-free detection

Installation Instructions Instructions d'installation Loop Placement Guide Guide de positionnement des boucles

11-10987

LiftMaster Clutch Shaft for MH

HTRKITRSL

LiftMaster Self-Regulating Heater and Coil for RSL12V ** DISCONTINUED

Protects system to -40F.
Installs into the operator frame

342.155-CUT

Whiting Intermediate Panel Tongue & Groove 15-1/2" h Cut to Exact Length *** Price on Request

Primer only
Customer must specify exact length required

GH755-L5

LiftMaster Gearhead with Brake 3/4HP 575V 3P L5 ***NLA

Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.

.......more details

Installation Manual Manuel d'Installation Sell sheet Brochure

K33-51206-315

LiftMaster Radio Receiver Board Elite **DISCONTINUED

Fits the Miracle-One gate operator

K72-12563

LiftMaster Clutch Shaft Kit for Model H Prior to 2005

MGR20-Y-2U-05

Miller Edge Sensing Edge Round Yellow 2-Wire Universal Outlet 5ft Long

��Electromechanical edge for standard 2" round or square frame sliding sing and bi-part gates. •3-sided activation allows for immediate stopping or reversing of motion •Contours to round or square posts. •Temperature range: -30F to 155F •Lead wire: 18 gauge 2ft length •Sensitivity: nominal 6-8 PSI •2 wrie NO configuration •ANSI/UL325 recognized component •Cannot be bent •One year warranty

Installation Manual Sell Sheet

MOD074

Manaras Hand Crank Modification

For manual operation with a hand crank instead of a chain hoist.
Hand crank hook and eye outlet is supplied.
A 5/8" rod or pipe (SHAFT002) is required but not supplied
SHAFT002 should be ordered separately and desired cut-to length specified at time of order.
This modification is also available for in the field upgrade - see MODKIT074
This modification applies to OGH and MGH operators

.......more details

MX00140-110V

Micanan Brake Assembly for PRO-TB/APTB with 110V Solenoid Outside - New Model ** DISCONTINUED

MD00086

Micanan Sprocket 40B18 x 1" 1/4" Keyway

029C98200-PRIMR

W-Style Complete Repl. Door Primer only

Primer only no stainless steel package.
For doors upto 98" wide x 100" h
Fully assembled door manufactured to exact size with all tracking and spring operator assembly
Price varies according to size

029C98290

W-Style Complete Replacement Door White Stainless Steel Pkg 029C98290

Manufactured to exact size fully assembled tracking and spring assembly included.
98" w x 90" h
Price varies according to size

26-94623

Truck Door Top Panel (13" x 98") for Whiting DryFreight

These panels are cut to an extra wide width to fit wider vehicle applications
Interlocking tongue and groove design for weather-tight joint and proper alignment.
.75" thick 7 ply exterior grade medium density plywood
Primer finish