Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home Your Search Wire Commercial Door & Gate Operator Accessories Chamberlain, LiftMaster
LMTBUL

LiftMaster Monitored Through Beam Photo Eye w/ Heater Nema 4X

  • Tested and evaluated by UL and meet UL 325 requirements.
  • Long Range powerful beam provides reliable performance.
  • Sensing distance up to 90 ft.
  • Anti-Fogging Lens
  • NEMA 4X rated
  • Wireless network mode eliminates the need to Wire between operators in dual-gate applications.
  • Easy to see LED indicators (2) for instant feedback emitter-power receiver-misaligned or blocked.
  • Integrated Diagnostics with Gate Operator Speed Installation
  • Compatible with Gate operators with Monitored Safety Inputs (8.2K Ohms)
  • Steel sensor hoods 6 ft. Wire brackets and mounting hardware included
  • Features integrated diagnostics with our 2018 UL® 325 Gate Operators.
  • 4-Wire connection (2 for Eye; 2 for heater)
Installation manualManuel d'installationProduct guide
50-104-2

LiftMaster Orange Coil Cord 3-Wire 18-ga 20 ft. Extended Curly Cord

LMWEKITU

LiftMaster Wireless Edge Kit Monitored

  • Meets 2016 UL 325 requirements
  • low-energy Bluetooth® transmission up to 130 ft. range
  • Integrated Diagnostics with Gate Operator Speed Installation
  • Protects up to 8 entrapment points
  • Receiver accepts up to 4 transmitters
  • Transmitter accepts up to 2 wired resistive edges
    • .......more details
Installation manualManuel d'installationInstruction manualManuel d'instructionsProduct GuideGuide de produit
LM21XPBB

LiftMaster Extended Performance Fire Door Release Device with Battery Backup

  • UL864 Revision 9 compliant
  • Programmable DIP switch delay setting - either 10 20 30 or 60 seconds delay of door release to permit passage clearance
  • Inputs for normally open 2- or 4-wire detectors and 4-wire normally closed detectors
  • Trouble and alarm relays for communication with the fire alarm control panel if required
  • Audible trouble sounder to indicate when the release device is not operational
  • On board diagnostic LEDs for easy troubleshooting
    • .......more details
Installation Manual
LMRRUL

LiftMaster Monitored Retro Reflective Photo Eye w/Heater 2018 UL325

  • Features integrated diagnostics with our 2018 UL® 325 Gate Operators.
  • Versatile Solution for entrapment protection.
  • Long-Range Sensing Distance of up to 50 ft. (LMRRUL)
  • Built-In Heater for dependable performance in most environments.
  • Increased Beam Angle for simple reliable alignment.
  • Versatile Gimble Bracket for fine alignment and adjustability.
    • .......more details
Installation manualManuel d'installationSell sheet
50-105

LiftMaster Black Coil Cord 4-Wire 18-ga 20 ft. Extended Curly Cord

S505AL

LiftMaster Monitored Small Profile Resistive Edge w/Aluminum Channel 5ft

  • Meets 2016 UL 325 requirements Edge sends signal to stop and/or reverse operation when sensing obstructions
  • Fast easy to install mounts vertically or horizontally
  • Compatible with Wireless edge kit LMWEKITU Transmitter LMWETXU and LiftMaster Gate Operators with Monitored Safety Inputs
Installation manual
50-104-1

Black Coil Cord 2-Wire 18-ga 20 ft. Extended Curly Cord

  • Retracted Length=4 Feet Extended Length=20 Feet 2 Wire 18 Gauge Cord Type SJEO
655302

LiftMaster Pneumatic 22' Sensing Edge with 2-Wire Take-Up Reel

50-106

Take-Up Reel 2-Wire Metal 18-ga 20ft

  • 18-gauge
  • 20 ft extended
  • Take up reels are NOT recommended for use with any failsafe type edge. Use coil cord only.
  • Also called Reel cord
655202

LiftMaster Pneumatic 14' Sensing Edge with 2-Wire Take-Up Reel

50800

LiftMaster RBMA Electric Treadle Nema 4/12 5ft long

  • Five feet long.
  • OPEN only (all LiftMaster operators) or SAFETY only (LiftMaster operators with type B2 C2 L2 T T1 or TS control wiring) after vehicle passes over treadle.
  • The weight of the vehicle compresses an electric switch which sends an open signal to the door.
  • Requires a 2-wire connection to the operator but does not require power to function
S504AL

LiftMaster Monitored Small Profile Resistive Edge w/Aluminum Channel 4ft

  • Meets 2016 UL 325 requirements Edge sends signal to stop and/or reverse operation when sensing obstructions
  • Fast easy to install mounts vertically or horizontally
  • Compatible with Wireless edge kit LMWEKITU Transmitter LMWETXU and LiftMaster Gate Operators with Monitored Safety Inputs
LM21AFCB

LiftMaster Advance Fire Control Release Device

  • UL 864 Revision 9 compliant.
  • 3 count obstruction cycling.
  • Selectable 10 20 30 or 60-second time delay on alarm.
  • Test key switch – Floor level testing.
  • Motor voltage sensing.
  • Form C relay output.
    • .......more details
LM2W-B

LiftMaster Photoelectric Smoke Detector 12/24VDC Standard 2-Wire (LMPD24-2W)

  • Plug-in detector line mounting base included
  • Large wire entry port
  • In-line terminals with SEMS screws
  • Mounts to octagonal and single-gang back boxes 4-square back boxes or direct to wall or ceiling
  • Stop-Drop N Lock attachment to base
  • Removable detector cover and chamber
    • .......more details
LMWETXU

LiftMaster Wireless Edge Transmitter Monitored

  • Connects to wireless edge receiver using low-energy Bluetooth transmission
  • Sensing distance up to 130 ft
  • Transmitter accepts up to 2 wired resistive edges
  • Battery life 2 years
  • NEMA 4X rated
  • Compatible with LMWEKITU Wireless Edge Kit and L50 and S50 Monitored Resistive Edges
    • .......more details
Installation manualManuel d'installationProduct GuideGuide de produit
G90-503000

LiftMaster Non-Resettable Counter 24VAC (50-12862)

  • Increases one number each time current is applied
  • Connects to the 24 volts of contactor coil
  • Simple 2-wire connection
  • Same as 50-12862
02-409

LiftMaster Key Switch 2-Position Nema 4/12

  • Two Position Key Control Station
  • Outdoor Surface Mt. (NEMA 4/12)
  • Tamperproof
  • Die cast metal enclosure with standard key cylinder
  • OPEN/CLOSE spring return to center (OFF) key removable in center position only. Should only be used on operators wired for constant pressure to open and close (all LiftMaster industrial operators with type D control wiring).
  • Dimiensions: 3" x 3.2" x 4.2"
    • .......more details
02-409B

LiftMaster Key Switch with Best Cylinder

  • Two Position Key Control Station
  • Outdoor Surface Mt. (NEMA 4/12)
  • Tamperproof
  • Die cast metal enclosure with BEST cylinder (construction core included)
  • OPEN/CLOSE spring return to center (OFF) key removable in center position only. Should only be used on operators wired for constant pressure to open and close (all LiftMaster industrial operators with type D control wiring).
  • Dimiensions: 3" x 3.2" x 4.2"
    • .......more details
CPS-EI

LiftMaster 4-Wire Sensing Edge Interface

  • Designed to provide advanced safety and security to the door system in commercial environments.
  • This device is intended for use with LiftMaster Logic Commercial door operators and compatible with 4-wire monitored sensing edges.
  • This is a stand-alone reversing system and is not intend to be used in conjunction with any additional entrapment protection devices.
  • A junction box not provided is recommend to protect exposed wiring.
  • Compatible with Logic 5.0 Logic 4.0 Medium Duty Operators and Fire Door Operators.