Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home Your Search 1 Commercial Door & Gate Operator Accessories Misc Garage Door Dock & Gate
02-403P

Push Button Control Station 3-Button Surface Mount NEMA 4/12 O/C/S Green Black Red Part # XALD03H7

  • Open/Close/Stop allows complete control of the door.
  • Compatible with all commercial door operators.
  • NEMA 4 4X 12 13
  • Outdoor surface mount station with polycarbonate enclosure part # XALD03H7
Sell sheet
E3K-2018

Omron Retro-Reflective Photocell w/Built-In 10K Resistor UL325-2018 *Same as model E3K-R10K4-NR-1

  • Fully complies with UL325-2018 standard for gate ops. that use the 10K resistor method and also the Normally Closed method
  • Easy to wire terminal strip
  • Plug-in replaceable outputs
  • Range: 40ft
  • Power: 24-240V AC/DC
  • The E3K-2018 has a second relay to accommodate traditional dry contact for non-monitored applications.
    • .......more details
Wiring DiagramsSell sheet
ER100

Carlo Gavazzi Reflector 4" (100mm) Square

  • High quality reflector for retro-reflective photoelectric switches
  • Dimensions: 100 mm x 100 mm 9.2 mm thick
ER4

Carlo Gavazzi Reflector 3-1/4" (84mm) Round

  • Can be used with the PMP12RI retro-reflective detector
  • Can be used with the reflector hood
  • Dimensions: 84 mm wide 7.4 mm thick
SOFT_EDGE-PROFILE

Devanco Canada Soft Edge Profile Sold per Foot

  • Yellow air-wave edge
  • Fits most 1-3/8" to 2" bottom retainers
  • 300 feet in a roll
3BLM-BC

Exterior Control Station 3 Button N4 with Mortise Lockout in Metal Enclose and Best Cylinder

  • Open-Close-Stop
  • Dimensions: 7" h x 2-3/4" w x 3-1/2" d
  • Exterior surface mount
3BLM-BC
02-103

Push Button Station 3-btn Surface Mount Metal Housing

  • PBS-3
  • Open-Close-Stop
  • Momentary contact
  • Nema 1
  • Dimensions: 5-5/16" H x 2-3/8" W x 1-13/16" D
50-101-2

Exterior 3-Wire Air Switch SPDT with Plastic Housing Mosley

  • Nema 4
  • 3-wire air switch; 1-NO and 1-NC contact
  • Mosley
  • NO contact on Yellow and Green
IS-2

Interlock Switch for Sectional Doors

  • Mounts on the door track to prevent the use of the operator when door is locked
  • Can be wired to a three button station
  • Demensions: 3" h x 3" w x 1-1/2" d
3BX

Control Station Exterior Surface Mount O/C/S N4 Metal Enclosure

  • Metal Enclosure
  • Buttons aligned in a triangular pattern
  • H=4-3/8" W=4-1/8" D=2-5/8"
  • 2 NO contacts and 1 NC (stop)
  • Nema 3R 4 12
3BX
PBT-3

Exterior 3-Btn O/C/S Control Station Nema 4 Metal Enclosure

  • Surface mount
  • Metal enclosure
  • Not CSA approved
  • Dimensions: 6" H x 2-3/4" W x 3-1/2" D
PBTL-3

Exterior 3-Btn O/C/S Control Station with Key Lockout Nema 4

  • Surface mount
  • Metal enclosure
  • Dimensions: 7" H x 2-3/4" W x 3-1/2" D
Sell sheet
ST-GLUE

Soft Touch Glue 1oz/25g

  • For use with Soft Touch Profile
  • 1 oz
REEL-20

Devanco Take-Up Reel 2-Wire Metal 18-ga 20ft Black

  • 18-gauge
  • 20 ft extended
  • Take up reels are NOT recommended for use with any failsafe type edge. Use coil cord only.
  • Also called Reel cord
  • Comes with reset button for CSA conformity
3BXLT

Control Station Exterior Surface Mount O/C/S N4 with Lockout Non-Metallic

  • Double pole contacts
  • Stations are randomly shipped with key numbers betwwen K001-K005 unless a specific key number is specified
  • Comes with 2 keys
  • H=7" W=2-3/4" D=2-3/4"
3BXT
50-107-30

Take-Up Reel 3-Wire Metal 30ft Extended

  • 3- wire 18-gauge
  • Also called Reel Cord
RP-3002

Rubber Plug 1/2"

  • To plug end of 3002 gum hose
RENO-BX4

RENO 11-Pin Amphenol Style Connector 12-24V Single Channel Loop Detector

  • The Model BX is a full featured single channel dual output vehicle detector that incorporates the reliable vehicle detection technology found in all of Reno A & E s vehicle detectors.
  • Eight detection sensitivity levels are selectable by means of a front panel mounted rotary switch external dip switches
  • Dimensions: 11-Pin Models - 3.00 inches (7.62 cm) high x 1.75 inches (4.45 cm) wide x 4.30 inches (10.92 cm) deep
Installation Manual Sell Sheet
LMA-1250-LV

Loop Detector with Deflectometer 1 channel 2 output 11 pin 12 - 24 VDC or 24 VAC *** SPECIAL ORDER subject to min dollar amount

  • The LMA-1250-LP operates with extremely low power requirements making it suitable for solar and battery powered applications
  • LMA-1250-LP operates on 12VDC or 24VDC nominal. Power consumption in the No Detect state is less than 4 milliamps at 12 VDC and less than 3 milliamps at 24 VDC
  • With a typical size vehicle over the roadway loop the DEFLECTOMETER® functions as a Sensitivity Meter.
  • The optimum sensitivity setting should provide a reading of “5”. You can adjust the DEFLECTOMETER® reading by using the front panel UP or DOWN sensitivity buttons.
  • Automatic quantitative feedback of the loop system operation ensures that the detector is set to the most optimum sensitivity level to detect ALL vehicles including motorcycles and high-bed vehicles
6062

Programmable Timer *** To Extent of Inventory

  • 12VDC or 24VDC operation is selectable
  • Functions include: One shot Delayed release Delayed operate Delayed pulse and Pulse / Flasher.
  • Momentary relay activation at the end of a desired timing cycle eliminating the need for having to use 2 timers to achieve this function
  • LED indicates relay is energized
  • Form C relay contacts are 8 amp at 120VAC / 28VDC
Installation instructions