Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home Your Search Misc Garage Door Dock & Gate
LVB420-11SF

Steel-Faced Laminated Bumper Black 4" Projection Vertical Installation 20" x 11" Sold Individually

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required.
  • 5/8" anchor bolts mounted through pre-drilled holes into dock or can be welded to curb angle.
  • Steel face is 3/8" thick heavy duty high carbon steel that is mounted over a laminated dock bumper.
  • Plate to be welded to 2 or 3 steel support brackets which are to extend back to the 3/4" supporting rods.
  • Brackets to be punched with elongated holes to allow steel face to "float" upon impact.
    • .......more details
STRUT-2-1/4-10'

Door Strut 2-1/4" Hemmed 10 ft Long

  • Reinforcement bar 2-1/4"
  • Electro-Galvanized
  • 22-GA
STRUT-2-1/4-9'

Door Strut 2-1/4" Hemmed 9 ft Long

  • Reinforcement bar 2-1/4"
  • Electro-Galvanized
  • 22-GA
HSC-600-B

Bench Swager 1/16" - 3/16"

  • Swages 1/16" 3/32" 1/8" 5/32" or 3/16"
  • Wire rope cutting capacity 3/16”
  • Made in Japan
H11G01-SS

Hinge #1 x 11 gauge Stainless Steel

  • Manufactured with 11ga. Rust-Resistant 304 Stainless Steel
  • Universal Design
  • Fits Most Overhead Sectional Doors
  • Priced Per Each
LVB420-11

Laminated Bumper Black 4" Projection Vertical Installation 20" x 11" Sold Individually

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 1” diameter.
    • .......more details
.234-2-L

Cut-to-Length Torsion Spring .234 x 2" Left Hand Wound Blue/White

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
Z9001-ACCPS

Pusher Spring HD for Commercial/Industrial Applications Sold as a Pair

  • Universal mounting can be configured to accommodate for limited room at the end of the horizontal tracks
  • Sold as pairs
50-107-30

Take-Up Reel 3-Wire Metal 30ft Extended

  • 3- wire 18-gauge
  • Also called Reel Cord
E3K-2018

Omron Retro-Reflective Photocell w/Built-In 10K Resistor UL325-2018 *Same as model E3K-R10K4-NR-1

  • Fully complies with UL325-2018 standard for gate ops. that use the 10K resistor method and also the Normally Closed method
  • Easy to wire terminal strip
  • Plug-in replaceable outputs
  • Range: 40ft
  • Power: 24-240V AC/DC
  • The E3K-2018 has a second relay to accommodate traditional dry contact for non-monitored applications.
    • .......more details
Wiring DiagramsSell sheet
2598

Aluminum 5/16" Cable Eyelet

  • For use on Whiting dry freight and refer doors
  • Use with 1/8" stainless or galvanized cable
R6000

Shaft Collar 1" with 2 Set Screws

  • Set Screws: 5/16 x 18
SBB-3

3" Safety Bottom Bracket Low Tension Sold as a Pair Torque Force

  • Includes 1-Right hand and 1-Left hand
  • Zinc plated Steel
  • Max Door Weight: 2200 LBS
  • Cable attachment: Fixed
  • Protective cover: No
  • Use with: Straight track 3"
    • .......more details
Installation instructionsInstructions d'installationSpec sheet
172845

Disconnect Chain Hoist Wall Mount 4:1 Torque Force

  • Wall mounting
  • 4:1 reduction
  • Maximum pull allowed on hand chain is 35lb
  • Includes (1) 41B36 sprocket with 1” bore 4’ of #41 roller chain 26’ of hand chain (1) chain keeper (2) set screws 5/16"-18 and limit switch
Sell sheet
RS1311

Roller 3" Steel 11" stem Precision Bearing

  • Steel Roller Wheel diameter: 3" 11" stem length 7/16" stem dia
SF600U-114

Spring Fitting 6" Pair for 1-1/4" Shaft

  • Universal thread and is available for 1" or 1.25" Bore - must specify when ordering.
  • Pair includes: (1) winding & (1) stationary.
  • Not single thread.
  • Winding bar hole 5/8"
124773

Roller 3" UHMW 7-1/4" Stem Rubber

  • 3" UHMW tire covered with rubber
  • 6202 sealed precision bearing
  • 7-1/4" zinc plated stem
  • Rating: 200lb load; 10000 cycles of a 12' door
  • Helps quiet the operation of jackshaft operators
124844

1" Nylon Bushing

Z9998

Hand Chain 26' for Torque Force Chain Hoists SAE 1008 Zinc Plated

  • Works with all Torque Force Chain Hoists
BK010

Commercial Top Bracket Adjustable 1-Bolt Sold per Piece

  • Galvanized steel
  • 12 gauge roller carrier and base plate
  • Adjustment of 7/16" minimum to 2-3/16" maximum
  • Good for use with 3" hardware