Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home Garage Door Commercial Door & Gate Operator Accessories Access Controls
LM21AFCB

LiftMaster Advance Fire Control Release Device

  • UL 864 Revision 9 compliant.
  • 3 count obstruction cycling.
  • Selectable 10 20 30 or 60-second time delay on alarm.
  • Test key switch – Floor level testing.
  • Motor voltage sensing.
  • Form C relay output.
    • .......more details
02-711

LiftMaster Nema 7/9 Ceiling Switch Pull Control

  • Single Pull Switch Control
  • Hazardous Area Overhead Mt. (NEMA 7/9)
  • Die cast hazardous area enclosure
  • May be used in two different ways; as an OPEN only control (all LiftMaster operators) or as an OPEN/CLOSE control (only LiftMaster operators with types B2 and S2 control wiring). In the latter case pulling the cord will open a fully closed door close a fully opened door and reverse a closing door.
  • Pulling the cord whlie the door is opening will either have no effect (type B2 wiring) or will stop the door (Solid State Logic Control Board).
  • WARNING: When used on most industrial operators this control will not stop the door. Use another control that has a STOP button in conjunction with this control.
    • .......more details
02-410B

LiftMaster Commercial Key Control Station Open-Close and Off with Stop Button and BEST Cylinder

  • Outdoor Surface Mount Nema 4/12 station
  • Standard key cylinder is replaced with BEST cylinder
  • Open/Close spring return to center (off)
  • Key removable in center position only
  • With Stop button
02-410

LiftMaster Commercial Key Control Station Open-Close and Off with Stop Button

  • Outdoor Surface Mount Nema 4/12 station
  • Standard key cylinder
  • Open/Close spring return to center (off)
  • Key removable in center position only
  • With Stop button
02-409B

LiftMaster Key Switch with Best Cylinder

  • Two Position Key Control Station
  • Outdoor Surface Mt. (NEMA 4/12)
  • Tamperproof
  • Die cast metal enclosure with BEST cylinder (construction core included)
  • OPEN/CLOSE spring return to center (OFF) key removable in center position only. Should only be used on operators wired for constant pressure to open and close (all LiftMaster industrial operators with type D control wiring).
  • Dimiensions: 3" x 3.2" x 4.2"
    • .......more details
02-407

LiftMaster Key Switch Assembly On/Off Nema 4/12

  • Two-position keyswitch. Key removable in either position.
  • Surface Mount
  • May be used on all operators
  • Die-cast metal enclosure non-tamperproof
02-401M

LiftMaster 1-Button Control Station

  • For use with various LiftMaster® Logic 4.0/5.0 and MAXUM Series Commercial Door Operator Applications
  • Sends the door to the full open position. Perfect for time sensitive situations.
02-401

Push Button Control Station 1-Button Surface Mount NEMA 1

  • Die-cast metal enclosure
  • START may be used as OPEN with all LiftMaster operators.
  • May be used as OPEN and CLOSE on all operators with type B2 control wiring
LM21XPBB

LiftMaster Extended Performance Fire Door Release Device with Battery Backup

  • UL864 Revision 9 compliant
  • Programmable DIP switch delay setting - either 10 20 30 or 60 seconds delay of door release to permit passage clearance
  • Inputs for normally open 2- or 4-wire detectors and 4-wire normally closed detectors
  • Trouble and alarm relays for communication with the fire alarm control panel if required
  • Audible trouble sounder to indicate when the release device is not operational
  • On board diagnostic LEDs for easy troubleshooting
    • .......more details
Installation Manual
02-103

Push Button Station 3-btn Surface Mount Metal Housing

  • PBS-3
  • Open-Close-Stop
  • Momentary contact
  • Nema 1
  • Dimensions: 5-5/16" H x 2-3/8" W x 1-13/16" D
02-103L

LiftMaster Push Button Station 3-btn Surface Mount O/C/S Nema 1 with Maintenance Alert LED

  • PBS-3
  • Open-Close-Stop
  • Momentary contact
  • Nema 1
  • Works with Liftmaster MH commercial operator
  • Dimensions: 5-5/16" H x 2-3/8" W x 1-13/16" D
    • .......more details
NTE5326

Bridge Rectifier 25A 600V

  • Bridge Rectifier Converts AC to DC voltage
  • For powering DC accessories when AC transformer present
  • Small size with convenient mounting hole in center
  • Same as MCCM2506-RH
Characteristics
02-411

LiftMaster Pull Switch Assembly Nema 4

  • May be used in two different ways: as an OPEN only control (all LiftMaster operators) or as an OPEN/CLOSE control (only LiftMaster operators with types B2 and S2 control wiring).
  • In the latter case pulling the cord will open a fully closed door close a fully opened door and reverse a closing door.
  • Pulling the cord whlie the door is opening will either have no effect (type B2 wiring) or will stop the door (Solid State Logic Control Board).
PBTL-3

Exterior 3-Btn O/C/S Control Station with Key Lockout Nema 4

  • Surface mount
  • Metal enclosure
  • Dimensions: 7" H x 2-3/4" W x 3-1/2" D
Sell sheet
3BXL

Control Station Exterior Surface Mount O/C/S N4 with Key Lockout

  • Metal Enclosure
  • Buttons aligned in a triangular pattern
  • H=4-3/8" W=4-1/8" D=2-5/8"
3BXL
02-403P

Push Button Control Station 3-Button Surface Mount NEMA 4/12 O/C/S Green Black Red Part # XALD03H7

  • Open/Close/Stop allows complete control of the door.
  • Compatible with all commercial door operators.
  • NEMA 4 4X 12 13
  • Outdoor surface mount station with polycarbonate enclosure part # XALD03H7
Sell sheet
50-450

LiftMaster Interlock Switch for Sectional Door Nema 4 (Same as 50-13529)

  • Interlock switch is engaged by the door side lock and disables operator control.
02-406

LiftMaster Push Button Station Nema 4 O/C/S with Keyed Lock-Out Die-Cast Enclosure

  • Code on key is #301
STATION081

Manaras Push Button Control Station 1-Button Nema 4/12

  • 1-button 1 N/O contact
  • Plastic
K23-20523

LiftMaster Interlock Switch 125/250VAC 3A N4

  • For use with various LiftMaster® Commercial Door Operators