Devanco Canada - Get The Right Garage Door Opener‎ and Parts

ME120-C

Miller Edge Aluminum Mounting Channel Sold per Foot

1-1/16" Wide 9/16" High

ME120-BLK-E-5FT

Miller Edge 2-Wire Black End Outlet 5 ft Long

Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
Touch sensitive signaling
Temperature range: -30F to 155F
Lead wire: 18 gauge 2ft length
Sensitivity: nominal 4 PSI
2 wire NO configuration

.......more details

Installation Manual Sell Sheet

E/BLOP/371

Automatic Systems Loop Detector for Logic Board with Drive

Feig Double Channel Loop Detector Option for AS1620 which is the new logic board with drive for the BL229

E/BLOP/150

Automatic Systems Safety Edge for BL229 14'-9" (EABLOP/150)

E/BLOP/122

Automatic Systems Red Arm Light - 2 Sets

Increases visibility of the arm on BL229 gate operator

LD-11

EMX Base Socket 11-Pin DIN Rail Mountable Black (Was formally Grey)

For use with D-TEK detectors (most commonly used)
Hourglass shaped

ME120-PC

Miller Edge Rigid PVC Mounting Channel Sold per Foot

ME120-BLK-E-4FT

Miller Edge 2-Wire Black End Outlet 4 ft Long

Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
Touch sensitive signaling
Temperature range: -30F to 155F
Lead wire: 18 gauge 2ft length
Sensitivity: nominal 4 PSI
2 wire NO configuration

.......more details

Installation Manual Sell Sheet

MGR20-B-2U-PER-FT

Miller Edge Sensing Edge Round Black 2-Wire Universal Outlet Sold Per Foot

��Electromechanical edge for standard 2" round or square frame sliding sing and bi-part gates. •3-sided activation allows for immediate stopping or reversing of motion •Contours to round or square posts. •Temperature range: -30F to 155F •Lead wire: 18 gauge 2ft length •Sensitivity: nominal 6-8 PSI •2 wrie NO configuration •ANSI/UL325 recognized component •Cannot be bent •One year warranty
Non-monitored edge
Maximum length is 10ft (over 8ft requires LTL shipment at additional cost)

MGS20-Y-2U-05

Miller Edge Sensing Edge Square Yellow 2-Wire Universal Outlet 5ft Long

��Electromechanical edge for standard 2" round or square frame sliding sing and bi-part gates. •3-sided activation allows for immediate stopping or reversing of motion •Contours to round or square posts. •Temperature range: -30F to 155F •Lead wire: 18 gauge 2ft length •Sensitivity: nominal 6-8 PSI •2 wrie NO configuration •ANSI/UL325 recognized component •Cannot be bent •One year warranty

LOOPDETLM

Liftmaster Plug-in Loop Detector for Liftmaster gate operators

Plug-in Loop detector for CSW24V CSL24V AND LA500
Includes diagnostic and test feature
12VDC/3mA power draw
For exit interrupt or shadow loop applications
Activates only when a vehicle passes over a loop
8 sensitivity levels plus boost to ensure that vehicles are easily identified

.......more details

Installation Manual

VMD202-100

EMX Vehicle Motion Detector Probe with 100ft Lead Wire

The VMD202 Vehicle Motion Detector is the most advanced single-piece vehicle motion sensor on the market today.
The probe and its electronics are housed in a slim design that is buried next to a driveway.
The VMD202-R Sensitivity Remote Control (sold separately) makes installation and fine tuning simple
Probe assembly and wire are water tight and direct burial compatible
Harness is pre-wired onto lead wire for easy installation
Settings are placed in a non-volatile memory in case of power failure

.......more details

Installation Manual Sell Sheet

ULT-MVP

EMX Industries Multi-Voltage Loop Detector (ULT-MVP-U)

Combines small size with 9VDC to 240VAC input range.
Size: 73 x 38 x 78mm
ULTRAMETER™ display indicates the appropriate sensitivity setting the vehicle positioned on the loop
Ten (10) sensitivity adjustments
Four (4) frequency settings
Automatic sensitivity boost (ASB) delay fail-safe/fail-secure and infinite or normal (5 min.) presence

.......more details

Operating Instructions Sell Sheet

ULT-PLG-D-TEK

EMX Industries Ultra Loop Plug-In Loop Detector Dual Output

Trademarked Detect-on-Stop technology
Easy install with trademarked UltraMeter display with 10 sensitivity settings
Sold-state output indicating vehicle presence
Ignore cross traffic in tight spaces
Select for automatic sensitivity boost (ABS) delay fail safe/fail secure
Second output for pulse entry/exit normal/infinite presence

.......more details

ME120-BLK-E-6FT

Miller Edge 2-Wire Black End Outlet 6 ft Long

Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
Touch sensitive signaling
Temperature range: -30F to 155F
Lead wire: 18 gauge 2ft length
Sensitivity: nominal 4 PSI
2 wire NO configuration

.......more details

Installation Manual Sell Sheet

ME120-BLK-2WIRE-E

Miller Edge Black 2-Wire End Outlet Sold per Foot

Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
Touch sensitive signaling
Temperature range: -30F to 155F
Lead wire: 18 gauge 2ft length
Sensitivity: nominal 4 PSI
2 wire NO configuration

.......more details

ME120-BLK-2WIRE-R

Miller Edge Black 2-Wire NM Right Hand Outlet Sold per Foot

Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
Touch sensitive signaling
Temperature range: -30F to 155F
Lead wire: 18 gauge 2ft length
Sensitivity: nominal 4 PSI
2 wire NO configuration

.......more details

ME120-BLK-2WIRE-L

Miller Edge Black 2-Wire NM Left Hand Outlet Sold per Foot

Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
Touch sensitive signaling
Temperature range: -30F to 155F
Lead wire: 18 gauge 2ft length
Sensitivity: nominal 4 PSI
2 wire NO configuration

.......more details