Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
19-50ML-NP

Master Link #50 Nickel Plated

Q024

LiftMaster Limit Switch Assembly for SL3000 (K75-50097) *** To Extent of Inventory

  • Same as part number K75-50097
41C3196

LiftMaster Antenna for Co-Axial Receiver

  • Wire antenna kit same as what is supplied in a 312 / 412 HMC
02-406

LiftMaster Push Button Station Nema 4 O/C/S with Keyed Lock-Out Die-Cast Enclosure

  • Code on key is #301
MDKP

Linear MegaCode Exterior Wireless Keypad 318 MHz

  • MDKP can transmit a unique signal for each 1-6 digit PIN code entered.
  • It has a built-in radio transmitter with a 250-foot range in line-of-sight conditions.
  • Access codes are programmed into the access controller or receiver the maximum number of codes possible depends on the receiver model used.
  • Features Include:
  • Internal antenna
  • 1-6 digit PIN for each user
    • .......more details
Installation Manual
41D1739-1

LiftMaster Motor & Travel Module (041-0236-000)

  • For model: 8550
  • Also known as: 41D8006-1 41D1739-1 41D1624-1 041D1624-1 41-0236-000
CABLE_1/8SS-500

Cable 1/8" 7x19 500' Stainless Steel

TUBE_SHAFT_18FT

Hollow Shaft 1" x 18'-10" Galvanized 14 gauge

34299R

Genie Deluxe Wall Console Series II ** Discontinued Replaced by 39165R

  • Deluxe Wall Console for Genie Intellicode Series II only
  • 3 function console: operates door opener controls lights and security lock out switch
  • Compatible with Code Dodger
  • Same as previous part number: GPWC-2WLB
02-403P

Push Button Control Station 3-Button Surface Mount NEMA 4/12 O/C/S Green Black Red

  • Open/Close/Stop allows complete control of the door.
  • Compatible with all commercial door operators.
  • NEMA 4 4X 12 13
  • Outdoor surface mount station with polycarbonate enclosure part # XALD03H7
Sell sheet
.234-258-R

Cut-to-Length Torsion Spring .234 x 2-5/8" Right Hand Wound Blue/White

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
.225-258-L

Cut-to-Length Torsion Spring .225 x 2-5/8" Left Hand Wound Orange/Green

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
.262-2-L

Cut-to-Length Torsion Spring .262 x 2" Left Hand Wound Red/Yellow

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
.250-2-R

Cut-to-Length Torsion Spring .250 x 2" Right Hand Wound Green

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
41A7562

LiftMaster Light Lens for 8360 8550 8355

  • Replacement light lens
.262-134-L

Cut-to-Length Torsion Spring .262 x 1-3/4" Left Hand Wound Red/Yellow

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
.250-134-R

Cut-to-Length Torsion Spring .250 x 1-3/4" Right Hand Wound Green

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
.243-134-R

Cut-to-Length Torsion Spring .243 x 1-3/4" Right Hand Wound White/Yellow

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
C-258-INSTALLED

Cones 2-5/8" Factory Installed (Pair)

  • For do-it-yourself installation use part no. SF258
21-3260-1

LiftMaster Transformer 50/60Hz 60va 120/208/240/480V

  • 120/208/240/480V PRIMARY 24V SECONDARY
CR2450

Maxcell/Renata 3V Lithium Button Cell

CR2032

Maxcell/Renata 3V Lithium Button Cell

312HMC

LiftMaster Universal Coaxial Receiver Sec+ 315 MHz

  • External 8" coaxial antenna included
  • Security+ rolling code technology and/or Dip switch compatibility
  • 12 VDC or 18-35 VAC/DC jumper selectable
  • Momentary or constant contact selectable
  • For replacement antenna use 41C3196
  • Accepts up to 31 remote control codes on Normal Security setting
    • .......more details
Programming InstructionsInstructions de programmation
.250_1-3/4"-LH

Torsion Spring .250 x 1-3/4" x 12ft LH Green

  • Wire size: .250
  • Inside diameter: 1-3/4"
  • Length: 12 ft
LSBLK

Loop Sealant Cartridge Black 29oz

  • Also available in grey (LSGRY)
  • Can be installed in sub-zero temperatures as long as the surface is clean and dry
  • Loop sealant gun sold separatley # LSGUN
41C4470

LiftMaster Gear & Sprocket Assembly for ATS211

  • Complete Gear and sprocket assembly for ATS211 ATS211R built from 1993 - 2003
Installation ManualManuel d'Installation
4A1344

LiftMaster Light Socket Plastic (41C279)

41A5483C

LiftMaster Circuit Board Assembly *** To extent of Inventory

  • Assembly includes: Circuit board end panel and light socket
  • For chain drive units with two lights
  • Fits 2265 2565 7420 PD610 PV612C & PD612K
  • Last letter of the part # indicates revision date
  • Also known as 41A5483 41A5483B
24-24-6

Small Relay 24VAC 11-Pin 3 PDT

T-53-S

FL-Allstar 3-btn 27-Door O/C/S Transmitter 107475-311 MHz ***NLA

  • This remote can control (open-close-stop) up to 27 doors.
  • It has a eight switches encoder with three positions: + 0 and - .
  • Manufacturer's model number: 535T (190-107475)
  • Dimensions: 6 1/4" x 3 3/8" x 1 3/8"
Programming Instructions
T-931-M

FL-Allstar 1-btn Mini Transmitter 109391-311 MHz

  • This single channel miniature transmitter controls one door.
  • It has a nine switches encoder with three positions: + 0 and -.
  • Manufacturer's model number: 9931MT (190-109301)
  • Dimensions: 1 3/8'' x 2 3/4'' x 1/2''
CP-SW-TD6A

Lynx Switch Light Delay

  • For the old Lynx 455 operators
144C56

LiftMaster Idler - Cable Pulley for chain drive

  • For square rail assemblies
  • Same as 144C0056
.363_6"-RH

Torsion Spring .363 x 6" x 12ft RH Green/White

  • Wire size: .363
  • Inside diameter: 6"
  • Length: 12 ft
.406_5-1/4"-RH

Torsion Spring .406 x 5-1/4" x 12ft RH Blue/Yellow

  • Wire size: .406
  • Inside diameter: 5-1/4"
  • Length: 12 ft
.331_5-1/4"-RH

Torsion Spring .331 x 5-1/4" x 12ft RH Red/White

  • Wire size: .331
  • Inside diameter: 5-1/4"
  • Length: 12 ft
.393_3-3/4"-RH

Torsion Spring .393 x 3-3/4" x 12ft RH Orange

  • Wire size: .393
  • Inside diameter: 3-3/4"
  • Length: 12 ft
.312_3-3/4"-RH

Torsion Spring .312 x 3-3/4" x 12ft RHW Yellow

  • Wire size: .312
  • Inside diameter: 3-3/4"
  • Length: 12 ft
.250_2-5/8"-RH

Torsion Spring .250 x 2-5/8" x 12ft RH Green

  • Wire size: .250
  • Inside diameter: 2-5/8"
  • Length: 12 ft
.283_2"-RH

Torsion Spring .283 x 2" x 12ft RH White

  • Wire size: .283
  • Inside diameter: 2"
  • Length: 12 ft
.207_2"-RH

Torsion Spring .207 x 2" x 12ft RH Brown

  • Wire size: .207
  • Inside diameter: 2"
  • Length: 12 ft
25-60652

Truck Door Reefer Bottom Roller Bracket Assembly for Whiting Style Doors ** To Extent of Inventory

  • Steel construction Black E-coat finish
  • Consist of roller clamp wear plate stud plate and 5/16" lock nuts
  • Stainless steel studs and nuts
  • Cross ref: 5600
23-10041-1

LiftMaster Double Limit Switch Commercial DP DT

  • Double limit switch DP DT
  • For LiftMaster and Micanan operators
12561

Doorlec Brake Drum 4" Diameter

  • Fits all Doorlec operators equipped with brake shoes
12562

Doorlec Lower Brake Shoe - Left

  • Fits on all Doorlec operators equipped with brake shoes
  • Use with drum #12561
T2B-DS

Lynx 2-btn Transmitter Dip Switch 303 MHz

  • Ultra secure mid-size transmitter with 8 dip-switches for coding
  • 2-buttons provides control for 2 Lynx operators
  • Compatible with HomeLink in-vehicle remote control
  • Can be mounted on visor with saddle clip or carried on a keychain
  • Visor clip and 12V battery included
  • Will work with Lynx residential operators built from 2000 and up.
    • .......more details
Compatibility chart
SEA433

Erone Tuned Antenna 433MHz

  • Increase reception and/or range
  • 11.5ft (3.5m) coaxial cable (RG 58) included
  • L-Shaped bracket for wall-mounting
Wireless System Chart
SEL2641R433-Z4

Erone 4-Relay Stand Alone Receiver 433MHz

  • Up to 85 transmitter keys
  • 2 NO relay + 2 NO/NC relay (24VA)
  • Self-learning memorization
  • Standard pulse output Relay number 4 can be setup to latched output
  • Can be used for O/S/C
  • Power requirements: 12/24Vac/dc
    • .......more details
Sell SheetBrochureWireless System Chart
OPH-6112-ECB

Manaras Opera-H 1/2HP 120V 1Ph with Electronic Circuit Board

  • A heavy-duty industrial jackshaft operator.
  • For use on Standard High and Vertical Lift sectional doors.
  • Can also be used on Rolling doors or Grilles.
  • Comes with a self-engaging chain hoist for manual operation.
  • Clearence: side room required 15"
  • 25 cycles per hour 100 cycles per day
    • .......more details
Installation ManualSell Sheet
MOUNTSHAFT001

Manaras Clutch Shaft Kit for MJH (pre-1998)

  • Input / clutch shaft kit for MJH models up to mid-1998
  • Kit includes V-belt 4L360 to fit with newer deeper pulley
  • For MJH built after 1999 use MOUNTSHAFT001A
Drawing
VBELT_5L350

Manaras VBelt 5L 35" - repl. by B32

  • Used on MTH MTBH MSL models
  • Type B
  • Inside length 32 inches
VBELT_4L360

Manaras VBelt 4L 36" - repl. by A34

  • Used on MJ / MJH models
  • New belt type A replaces old 4L360. Part number VBELTA34
LIMIT006

Manaras Single Micro Limit Switch with Flat Lever

  • Fits old medium-duty Manaras operators such as MDJ
  • SPDT - Cherry
Limit Switch Chart
LIMIT024

Manaras Double Snap-Action Limit Switch with Flat Lever

  • Replacement for LIMIT003
  • 2x SPDT - Unimax
  • Same as Doorlec # 21702
Limit Switch Chart
DRUM005

Manaras Steel Brake Drum 5/8" - replaces DRUM004

  • Replaces DRUM004
  • Brake drum with edges for current braking systems (2000 - current)
  • Used on all Manaras operators except Gear Head models.
  • Use with BRAKEPART019 (old part BRAKEPART017)
DISCONNECT001

Manaras Floor Level Disconnect Lever

RADIO-EM103SD

Manaras 3-btn transmitter configured as O/C/S 1 door Rolling Code 390 MHz

  • Open/Close/Stop remote for 1 door
  • Operates single door: O/C/S configuration
  • LED indicator CR2032 battery and visor clip included
  • Field Selectable: Jumper inside the remote can be positioned to Single Door (SD) or Multiple Door (MD)
  • Compatible with Manaras operators manufactured after August 2013 with control board070E & board070M.
Manual
STATION078

Manaras 3-btn Push-Button Control Station Nema 4/12

  • 2 N/O contacts and 1 N/C contact for stop.
  • Surface mount.
Sell sheet
308302

Linear 2-Channel Multi-Code Key Ring Transmitter 310 MHz

  • Open/Close remote for 2 doors
  • Compatible with 310 MHz Stanley and Multi-Code receivers
  • Easy access to battery and coding switches - 10 dip switches
  • Power: 12-volt battery
  • Codes: 1024 codes for each channel (set by dip switches)
  • RF frequency: 310 MHz
    • .......more details
Programming Instructions
1336.4

Whiting Roadside Top Panel Closure Bracket for 8" radius track

308913

Linear 1-Channel Multi-Code Visor Transmitter 310 MHz

  • Open/Close remote for 1 door
  • Compatible with 310 MHz Stanley and Multi-Code receivers
  • Supplied with visor clip
  • Easy access to battery and coding switches - 10 dip switches
  • Power: 9-volt battery
  • Codes: 1024 (set by dip switches)
    • .......more details
Programming Instructions
831-R

Allstar 1-Door O/C/S Receiver 107480 318 MHz ** To Extent of Inventory

  • Three channels - three relay outputs
  • Textured aluminum case
  • Terminal strip for wiring
  • Wire whip antenna with "F" connector
  • Compatible with Allstar Classic Allister and Pulsar dipswitch transmitters and MVP quik-code transmitters
  • Power: 24 VAC
    • .......more details
Programming Instructions - Dip Switch VersionProgramming Instructions - Learn Button Version
1336.2

Whiting Roadside Top panel Closure Bracket 10" Raduis

MCT-2

Linear 2-btn MegaCode Visor Transmitter 318 MHz

  • Activates two 318MHz MegaCode receivers independently
  • Test/operate LED
  • Visor mounting clip supplied
  • Power: 9-volt battery incl.
  • Codes: 1000000+ (MegaCode format)
  • Dimensions: 2.16" W x 3.75" H x .95" D
    • .......more details
Programming Instructions
8833T

Allstar 3-btn 3-Door Transmitter 108817 318 MHz

  • Open/Close remote for 3 doors
  • Compatible with Allstar and MVP receivers
  • Visor mounting clip supplied
  • Power: 9-volt battery
  • Codes: 6561 (set by trinary dip switches)
  • RF frequency: 318 MHz
    • .......more details
Programming Instructions
733T

Allstar 3-btn 3-Door O/C/S Transmitter 107477 318 MHz *** Replaced by P-733T

  • Open/Close/Stop remote for 3 doors
  • Compatible with 3-channel Allstar and MVP receivers
  • Stationary mounting
  • Easy access to battery and coding switch
  • Power: 9-volt battery
  • Codes: 6561 (set by eight trinary dip switches)
    • .......more details
Programming Instructions
232168

Capacitor 3/4 HP 220V 65 MFD

  • For LCO75 only
1336.7

Whiting Stainless Steel Curbside Top Closure Bracket for 8" radius

15.1

Whiting Truck Door Stainless Steel Center Hinge

300BL

3" Light Brush Insert 6ft Long

  • Polypropylene bristles
  • Same as model MS1705
600BL

6" Light Brush Insert 6ft Long

  • Polypropylene bristles
4005-8FT

Aluminum Retainer only for Heavy Brush 8' Long 180 degree

  • For angle application (180 degree)
  • For use with Heavy Brush
4007-12FT

Aluminum Retainer only for Light Brush 90 degree**Actual Length 12'2"

  • For angle application
  • For use with Light Brush or Vinyl Insert.
  • die # A-25060
4007-6FT

Aluminum Retainer only for Light Brush 90 degree***Actual Length 6'1"

  • For angle application (90 degree).
  • For use with Light Brush or Vinyl Insert.
1009-1-3/4"

Bottom Nail-On for Wood Door Heavy Duty per foot

  • For 1-3/4" commercial doors.
  • Color: Black
1006-1-3/8-24'

Rigid Vinyl Bottom Retainer U-Shaped 24' Long

  • Black with flexible fin to touch door face.
  • For door thickness 1-3/8"
1003-2-8'

Aluminum Bottom Retainer L-Shaped 8' Long

  • For 2" thick doors.
1003-1-3/8-24'

Aluminum Bottom Retainer L-Shaped

  • For 1-3/8" thick doors.
  • DIE # ES18009
1003-1-5/8-10'

Aluminum Bottom Retainer L-Shaped

  • For 1-5/8" thick doors.
1104-9FT-DK-BRN

Residential Side & Top PVC Weather-Strip with cap 9' Long - Commercial Brown (DN)

  • Commercial brown rigid vinyl retainer with commercial brown flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
1104-7FT-CREAM

Residential Side & Top PVC Weather-Strip with cap 7' Long - Cream (C)

  • Cream rigid vinyl retainer with cream flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
  • Also known as Almond
1104-12FT-SAND

Residential Side & Top PVC Weather-Strip with cap 12' Long - Sandstone (D)

  • Sandstone rigid vinyl retainer with sandstone flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
  • Also known as Taupe
1104-8FT-SAND

Residential Side & Top PVC Weather-Strip with cap 8' Long - Sandstone (D)

  • Sandstone rigid vinyl retainer with sandstone flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
  • Also known as Taupe
7001-10-WHITE

Commercial Side & Top Weather-Strip 10' Long - White (W)

  • White galvanized steel with white dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
7001-7-WHITE

Commercial Side & Top Weather-Strip 7' Long - White 7001-WW (W)

  • White galvanized steel with white dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
1001-24-GREY

Commercial Side & Top Weather-Strip 24' Long - Grey

  • Aluminum retainer with grey dual-fin vinyl
  • Sold by full case quantity (10)
32-48-170

Extension Spring 8' Door - 170 lbs Orange ** Replaced by 27-48-170

  • Double - Loop
  • 32" long 48" stretch 170 lb load
  • Springs sold individually
  • Rated for 10000 cycles
Spec Sheet
25-42-200

Extension Spring 7' Door - 200 lbs Tan

  • Double - Loop
  • 25" long 42" stretch 200 lb load
  • Sold individually
  • Rated for 10000 cycles
  • Same as part number 120
Spec Sheet
28-32081

Truck Door 2" Horizontal Track with 8" Radius 120" Roadside (LH) for Whiting Roll-Up Doors

  • SPECS: Length: 120" Fits door sizes: Greater than 96" high
  • Cross Reference: W #11-3
  • Galvanized steel 14 gauge construction
  • Tongue and groove for proper alignment at joints
  • 8" radius
  • For use with 2" diameter steel or nylon rollers
    • .......more details
91-00400

Truck Door Step Bolt 1/4"-20 x 1.25" (3/4" head)- Sold Per Piece

  • Zinc plated finish
  • Cross Reference: T #80015-1610 120250
28-02290

Truck Door 2" Vertical Track & Right Angle Assembly 96.5" Curbside (RH) for Whiting Roll-Up Doors

  • SPECS: Length: 96.5" Fits door sizes: 72" - 90" high
  • Assembly includes: Right angle mounting track Vertical track and Torsion bracket
  • Cross Reference: W #2275-1
  • Galvanized steel 14 gauge construction
  • Tongue and groove for proper alignment at joints
28-02114

Truck Door 2" Vertical Track and Right Angle Assembly 120" Roadside (LH) for Whiting Roll-Up doors

  • SPECS: Length: 120" Fits door sizes: 101" - 114" high
  • Assembly includes: Right angle mounting track Vertical track and Torsion bracket
  • Cross Reference: W #2275-2
  • Galvanized steel 14 gauge construction
  • Tongue and groove for proper alignment at joints
27-20200

Truck Door Winding Plug for Todco Roll-Up Doors

  • Cast aluminum construction.
  • Provides easy method to adjusting spring tension.
  • Cross Reference: T #59158 T #51041 W #4050 340100
26-40037

Truck Door Offset U-Channel Seal Retainer 96" Long for Whiting DryFreight Doors *** To extent of inventory

  • Aluminum extrusion construction.
  • Retainer is offset to allow header clearence with seal when door is in open position.
  • For use with offset bottom seal #26-40040
  • Cross Reference: W #8280
26-40027

Truck Door Bottom Seal 98" Long for Whiting Dryfreight Doors

  • Flexible PVC material
  • Cross Reference: W #1676
26-40018

Truck Door Bottom L-Retainer 84" Long for Todco Roll-Up Doors

  • Galvanized steel construction for extra strength and corrosion resistance.
  • Fits both standard and heavy-duty bottom seals.
  • Pre-punched holes for added convenience
  • Cross Reference: T #61191 W #4034 260000
25E10271

Truck Door Stud Plate for Bottom Roller Black E-coat finish for Whiting Roll-Up Doors

  • Steel construction Black E-coat finish
  • Stud plate for 1 stud
  • Cross Reference: W #1370
25E10002

Truck Door End Hinge & Roller Cover Black E-coat finish for Whiting Roll-Up Doors

  • Steel construction Black E-coat finish
  • Removable cover allows roller change without hinge removal
  • Cross Reference: W #1209 T #70162
  • Box quantity: 50
SF375

Spring Fitting 3-3/4" Pair (Long Ear)

  • Universal thread for use in either LH or RH wound springs.
  • Pair includes: (1) winding & (1) stationary.
  • Maximum wire size diameter: .4062".
  • Set screw installed: 3/8"-16 x 1-1/2" (2).
  • Mounting: 1" tube or solid shaft - min. 1/2 turns on the set screws.
  • Winding bar hole 5/8"
    • .......more details
SF258

Spring Fitting 2-5/8" Pair

  • Universal thread for use in either LH or RH wound springs.
  • Pair includes: (1) winding & (1) stationary.
  • Maximum wire size diameter: .3310".
  • Set screw installed: 3/8"-16 x 1" (2).
  • Mounting: 1" tube or solid shaft - min. 1/2 turns on set screws.
  • Winding bar hole 1/2"
    • .......more details