Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
111537.0001.S

Overhead Sprocket 38T 1/4P

  • Sprocket for the limit shaft
  • For the 1/2 hp 3/4 hp & 1 hp hoist RHX operator.
41A7920-2

LiftMaster Hardware Kit

K001C3196-3

LiftMaster Antenna 315MHz

  • Fits SL595
K001A5859

LiftMaster Elite Dual Motor Circuit Board Q171 ** NLA

  • Old style fits SL3000 CSW 200 with Q019 boards only
  • This board has been discontinued and no replacement available
R5221

Sheave Strap 4"

  • Sheave strap also known as fork only
SNACPH39

LiftMaster HID 30-bit Proximity Card Facility Code 9 *Discontinued*

  • Same as SN000099-30-9
  • Compatible with KPR2000 reader
  • Replaced by LMPC2-SN (need to know facility code)
SNACPH32

LiftMaster HID 30-bit Proximity Card Facility Code 2 *Discontinued*

  • Same as SN000099-30-2
  • Compatible with KPR2000 reader
  • Replaced by LMPC2-SN (need to know facility code)
BCH753L5-RH

LiftMaster Hoist Op. with Carwash Mod. 3/4 HP 208/230/460 VAC 3 Ph L5 Right Hand ***Replaced by CRBH753L5-RH

  • Industrial Duty Hoist Operator with Damp Environment modification
  • External brake included
  • Comes with CPS-UN4 photoeyes
Installation manualManuel d'installationSell sheetBrochure
2806.156.195

Whiting .156 x 2-3/16 x 19.5" Roadside with Cones

790919

FAAC Control Board 115V for 455D

SOLID_SHAFT_13'

Solid Shaft 1" Keyed 13 ft Galvanized

  • Actual length is approx. 13'-1"
MIRM-T2-50

Miller Edge Patriot 2 Photo Eye Monitored 50ft Non-Contact ** Discontinued

  • Attaches directly to a Sectional door.
  • The photo eyes travel below the door during the closing cycle.
  • Unlike traditional static mount photo eyes; Patriot travels with the door sensing obstructions prior to contact.
  • The Patriot2 non-contact system consists of thru beam photo optics.
  • Emitting and receiving eyes mount into a rigid steel spring loaded retracting housing.
  • The housings attach to the bottom section of the door and extend below the leading edge of the door providing an invisible infrared light beam of protection.
    • .......more details
620-00993

Linear Heater Kit 230V

  • Heater kit for slide gate operator 230V
K75-34791

LiftMaster Clutch Kit for SL585

  • Kit includes: Clutch disk Clutch plate Torque Limiter Hub Sprocket Washer E-Rings Nut Bearings and Compression spring
.343-514-R

Cut-to-Length Torsion Spring .343 x 5-1/4" Right Hand Wound Blue/Red

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-525-INSTALLED
  • If cones are required a filler must be added use part # FILLER
.343-514-L

Cut-to-Length Torsion Spring .343 x 5-1/4" Left Hand Wound Blue/Red

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-525-INSTALLED
  • If cones are required a filler must be added use part # FILLER
2650-112-05

Linear Cold Weather Package 230V SLC gate Op. Only

  • Cold weather package includes: Arctic oil Heater Cogged V-belt
EQ2712

SkyLink 3/4 HP Garage Door Opener with 1 Remote ** Discontinued

  • The DC motor offers additional benefits with very quiet operation and much less vibration.
  • It is ideal for garage doors that are below a living room or bedroom.
  • The DC motor also offers the soft start soft stop features which reduces the vibration and wear and tear of all the mechanical parts
  • Features: Rolling Code Technology Soft Start Soft Stop Optimal Force Learnings and Safety Beam Sensors.
  • Available in either Belt or Chain drive
Installation manualSell sheet
0-7530-444

FHP Electric Motor 1/3 HP 110V 1625 RPM Motor A099231

5001-18-BLACK

Residential Side & Top Weather-Strip 18' Long - Black

  • Painted aluminum retainer with flexible dual fin vinyl.
  • Residential use.
07-8058

LiftMaster Crank Link BG790

K20-3050B-4P

LiftMaster Electric Motor 1/2 HP 208/230/460V 3Ph L3 L4 Contactor

  • Standard 1/2 hp motor
  • Same as 20-3033-1
TRANSF037

Manaras Transformer 240/208-24VAC 40VA

  • Transformer 240-208V Primary 24VAC Secondary 40VA
41D8181

LiftMaster Cover

PRO-H-7511U-RH

Micanan 3/4HP 115V 1P Hoist Operator N1 Eyes Monitored ECB Right Hand

  • Continuous duty belt drive jackshaft operator with emergency chain hoist
  • Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
  • Nema 1 photoeyes included
  • Solenoid brake OPTIONAL
Installation manualSpecification sheet
.319-6-RH

Cut-to-Length Torsion Spring .319 x 6" Right Hand Blue/Green

  • Spring wire only. Cones and Filler extra
5001-WG-16-MOAK

Residential Side & Top Weather-Strip 16' Long Wood Grain Medium Oak with Screws

  • PVC wrapped
  • Painted aluminum retainer
  • Dual fin vinyl
  • Painted screws to match. 1 screw per foot
  • Sold by full case quantity (20)
5001-WG-12-MOAK

Residential Side & Top Weather-Strip 12' Long Wood Grain Medium Oak with Screws

  • PVC wrapped
  • Painted aluminum retainer
  • Dual fin vinyl
  • Painted screws to match. 1 screw per foot
  • Sold by full case quantity (20)
5001-WG-10-MOAK

Residential Side & Top Weather-Strip 10' Long Wood Grain Medium Oak with Screws

  • PVC wrapped
  • Painted aluminum retainer
  • Dual fin vinyl
  • Painted screws to match. 1 screw per foot
  • Sold by full case quantity (20)
5001-WG-7-MOAK

Residential Side & Top Weather-Strip 7' Long Wood Grain Medium Oak with Screws

  • PVC wrapped
  • Painted aluminum retainer
  • Dual fin vinyl
  • Painted screws to match. 1 screw per foot
  • Sold by full case quantity (20)
1104-9FT-BRONZE

Residential Side & Top PVC Weather-Strip with cap 9' Long - Bronze (F)

  • Bronze rigid vinyl retainer with bronze flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
TBKL-14X4

Turnbuckle Loop Ends 1/4 x 4" 500 lbs

  • Hot dipped galvanized drop forged with lock ends
  • Eye & Eye ends
  • Work Load Limit : 500 LBS
L-4-18-0-M

Cable Tie Standard 18 LB Black 4" Nylon 1000/pkg

  • Length: 4.12" / Width: .095" / Thickness: .042" / Diameter: .875"
  • Low insertion and pull through force
  • Advanced pawl and teeth design
  • Angled tail provides quicker initial insertion alignment
  • Tail finger grips allow easier handling and tightening
  • Rounded edges provide added safety and eliminate insulation damage
    • .......more details
COUPLING019

Manaras Manual Hoist Coupling

  • For Opera-SH
SF514U

Spring Fitting 5-1/4" Pair for 1" shaft

  • Universal thread for use in either LH or RH wound springs.
  • Pair includes: (1) winding & (1) stationary.
2B639

LiftMaster Speaker for EL25 (41B0639)

  • 1B0639
20-8100M-DC

LiftMaster Electric Motor for VSL 1 HP 90 VDC 1 ph

  • Replacement electric motor for VSL gate op.
IRB-RX

EMX Industries Receiver Board Only for IRB-4X *** NLA

27-24402

Truck Door Dual Torsion Spring Assembly 87/35 for Whiting Roll-Up Doors

  • Assembly includes: shaft LH & RH springs winding cones cable drums with bearings and spring spacers.
  • Springs are treated with rust preventative
  • Roadside cable drum is color coded RED
  • Specs: Shaft Length: 87" Spring Length: 35" Wire diameter: .187 -
  • Winding cone color: White
12575

Doorlec Clutch Disc Fiber 4" dia.x 5/8" bore

  • Fits model LJ / LJH
CB116A0500

Cable 1/16" 7x7 500' Galvanized

  • Galvanized cable 1/16" 7x7 500ft spool.
41A6569

LiftMaster Safety Sensor Mounting Kit

  • Replacement brackets only for 41A4373A safety eyes
MK-00042

Micanan Overload Reset 1-Phase 13 Amps

TUBE_SHAFT_12FT

Hollow Shaft 1" x 12'-10" Galvanized 16 gauge

  • When ordering order one foot longer that actual door width
NUT022

Manaras Lock Nut Zinc Plated 3/8-16 Hex Nylon

  • Used on old MJH
1003-3-DF-CUT

Bottom U-Rubber 3" Dual Fin Black Sold per Foot

  • Sold in cut-lengths per foot.
  • Dual fin
C20-32F

Bearing 1-1/4" x 2" Press Fit C20-32F+GR 400 LBS

  • Stamped bearing for lighter loads
  • For a heavier duty machined bearing use R5114
28020010-500

Cable Stainless 5/32" 1x19 500' Inox ** Price on Request

  • Not for use in aircraft applications
  • 1x19 contruction type 302 / 304
Comparison charts
H12G10-SS

Hinge #10 x 12 gauge Stainless Steel

  • Manufactured with 12ga. Rust-Resistant Stainless Steel
  • Universal Design
  • Fits Most Overhead Sectional Doors
  • Priced Per Each
82-SB50-08

LiftMaster Shoulder Bolt 3/8"-16x8 **DISCONTINUED

  • Shoulder Bolt
  • For SW470-S3
  • Formerly 82SB5008 G82SB5008
V3563-00-W-200

Vinyl Seal 3" Bottom Bead End 198" Bead Grey 200' Spool

  • Bead diameter 3/16"-7/32" +/- tolerance
MCJH-453-CONT-R

Lynx Heavy-Duty Jackshaft 3/4 Hp 575V 3 Ph Contactor Right Hand ** Replaced by CDJH

Sell Sheet
CHI-SPECIAL

C.H.I. Special Order Door

  • Special order as per customer's requirements
PVD-ARM-ALUM-16

Aluminum Gate Arm 16' 1" x 3.5" with Reflective Band

22210

Push Button Station 3 Oval Buttons O/C/S Flush Mount ** discontinued. To Extent of Inventory

  • Three button wall station Open/Close/Stop
  • NO contacts on the Open and Close buttons
  • NC contact on the Stop button
  • Stainless steel surface plate
  • Flush mount
.437-6-L

Cut-to-Length Torsion Spring .437 x 6" Left Hand Wound Red/Green

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
CONTACTOR041

Reversing Contactor 1 Ph-9A-24VAC

ZT37028235

Firestar Shutter 540 Galv with Lock & Key

20001

Doorlec Brake Spring

  • Fits LJ/LJH
OSH-6533-ECB-LH

Manaras Opera-SH 3/4 HP 600V 3 Ph with Electronic Circuit Board Left Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
Installation manualSell sheet
9301644400

Galvanized Torsion Spring .306 x 3-3/4 x 44" L with Cones RHW

MD00044

Micanan Spur Gear 12B60

FHKS3D-74

Stainless Steel Face Hardware Kit 3" Track Double End Stile 4 Panel 7 Sections

  • Kit includes: Top & Bottom fixtures Center hinges End hinges and Hinge screws.
  • 304L rust-resistant stainless steel
  • 12 gauge
053156

Magnetic Mount Micro Dome Beacon Amber ** To Extent of Inventory

  • 60 LEDs 360 degree revolving flash / intermittent flash
  • -30 degree celsius to + 50 degree celsius extreme temperature reliability
37561R

Genie Belt and Bullet Assembly 7ft

  • For 7' Tall Doors Only
  • Fits the following models: IntelliG 1000 (3024) IntelliG 1200 (4024)
  • SilentMax 1000 (3042) SilentMax 1200 (4042)
OMJ-6112-ECB-L

Manaras Medium-Duty Jackshaft Operator 1/2 HP 120V with Electronic Circuit Board Left Hand

  • Designed for use on standard high and vertical lift sectional doors
  • Can also be used on small rolling doors and grills
  • Single phase intermittent-duty motor has instant reverse and internal automatic reset thermal overload protection
  • Mechanical brake
  • Floor level disconnect mechanism which must be engaged for manual push-up operation
  • 14 cycles per hour 50 cycles per day
    • .......more details
Installation manualSell sheet
CABLE_1/4SS-500

Cable 1/4" 7x19 500' Stainless Steel

27-8004-K

LiftMaster Aux. Contact Block Relay

  • 2-NO/ 2-NC Contacts
  • Used on 03-8024K contactor
601332.0001

Overhead Sprocket 14T 1/4P x 3/8D

  • Fits Overhead JST drawbar model
  • Sprocket attaches to the limit shaft
ME111-R

Miller Edge Black Right Hand Outlet 7/8" wide x 1-1/2" high Sold by the Foot

  • Slide in style edge for barrier gate and counter shutter application.
  • Touch sensitive signaling allows for immediate stopping/reversing of motion depending on application. •Temperature Range: -30F to 155F
  • Lead wire: AWM 22 gauge 2ft length
  • Sensitivity: nominal 6-8 PSI
  • Vertical or horizontal mount
  • ANSI/UL325 recognized component
    • .......more details
Installation ManualWorksheetSell Sheet
PRO-H-FRAME

Micanan Frame for PRO-H

1104-7'-DK-SAND

Residential Side & Top PVC Weather-Strip with cap 7' Long - Dark Sandstone (DDG)

  • Garaga dark sandstone rigid vinyl retainer with Garaga dark sandstone flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
.306-6-L

Cut-to-Length Torsion Spring .306 x 6" Left Hand Wound Red

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
MARED12

LiftMaster Red LED Light Stip 9.9ft Long ** Discontinued

  • Provides LED visibility on both sides to 12 ft. arm.
26966A

Genie Idler Pulley for Stealth Chain Drive

  • Fits Genie Stealth model
  • 1/4” bore
  • Channel style rails
.250-334-R

Cut-to-Length Torsion Spring .250 x 3-3/4" Right Hand Wound Green

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-375-INSTALLED
PBS3-BLACK

Replacement Button Only - Black

  • Replacement button for 02-403P
OPH-6113-CONT-L

Manaras Opera-H 3/4HP 120V 1Ph with Mechanical Contactor Left Hand

  • A heavy-duty industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a self-engaging chain hoist for manual operation
  • Clearence: side room required 15"
Installation ManualSell Sheet
CABLE-NR-14-CC

Cable No Roll 1/4" 19x7 Non-Galvanized C-Coated 500ft

  • 19X7 rotation-resistant wire rope.
11-10705

LiftMaster Output Shaft MH

OSH-6233-CONT-R

Manaras Opera-SH 3/4 HP 208V 3 Ph Contactor Right Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
    • .......more details
Installation Manual Sell Sheet
OSH-6112-CONT-R

Manaras Opera-SH 1/2HP 120V 1Ph Contactor Right Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
Installation ManualSell Sheet
R5995

Shaft Collar 1-1/4" Double Split

K72-19975

LiftMaster Clutch Shaft and Sprocket Assembly

  • Assembly includes: Clutch shaft 1" keyed flange bearings Dual sprcket 32/14 Splined core sprocket E-ring Compression spring Pulley assembly Washers Thrust bearing Retaining ring Slined hub and roll pin
  • Compatible with DJ J operators
MGH-6113-ECB-RH

Manaras 3/4 HP 120V 1P Jackshaft with Elect. Circuit Board Right Hand

  • A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
  • It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
  • Electrically activated drum-band type solenoid brake
  • Full overload protection
Installation ManualSell Sheet
CPT210-C3

Miller Edge PVC Mounting Channel "L" Shape Sold by the Foot *** Disc. Repl by ME210-C3

  • Used on CPT-210 extrusion
CPT-210-K5

Miller Edge Non-Monitored End Plug Kit *** Discontinued

  • For use with CPT-210-50 bulk extrusion
  • Kit includes: 5 wired 5 non-wired end-plugs 1oz tube of adhesive
1007-1-5/8-8

Aluminum Bottom Retainer Flat Fits Doors 1-5/8 to 1-3/4" Thick

  • For door thickness of 1-5/8" to 1-3/4"
7001-WG-16-MO

Residential Wood Grain Side & Top W/S Medium Oak 16' Long - Painted Screws to Match

  • Medium Oak retainer with Medium Oak vinyl
  • PVC Wrapped
  • Steel is Notched on Both Ends for Easier Installation
  • Economical
  • Dual Fin Vinyl
  • Painted Screws to Match
    • .......more details
7001-WG-16-DO

Residential Wood Grain Side & Top W/S Dark Oak 16' Long - Painted Screws to Match

  • Dark Oak retainer with Dark Oak vinyl
  • PVC Wrapped
  • Steel is Notched on Both Ends for Easier Installation
  • Economical
  • Dual Fin Vinyl
  • Painted Screws to Match
    • .......more details
7001-WG-10-DO

Residential Wood Grain Side & Top W/S Dark Oak 10' Long - Painted Screws to Match

  • Dark Oak retainer with Dark Oak vinyl
  • PVC Wrapped
  • Steel is Notched on Both Ends for Easier Installation
  • Economical
  • Dual Fin Vinyl
  • Painted Screws to Match
    • .......more details
7001-WG-10-CO

Residential Wood Grain Side & Top W/S Cherry Oak 10' Long - Painted Screws to Match

  • Cherry Oak retainer with Cherry Oak vinyl
  • PVC Wrapped
  • Steel is Notched on Both Ends for Easier Installation
  • Economical
  • Dual Fin Vinyl
  • Painted Screws to Match
    • .......more details
1001-18-GREY

Commercial Side & Top Weather-Strip 18' Long - Grey

  • Aluminum retainer with grey dual-fin vinyl
  • Sold by full case quantity (10)
PLATE084

Manaras Plated Brake Plate for OSH

  • Plate only
26CW94522

Truck Door Intermediate Panel (12" x 98") Painted White for Whiting Dryfreight

  • These panels are cut to an extra wide width to fit wider vehicle applications.
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • 3/4" thick 7 ply exterior grade medium density plywood.
  • Painted white
TC134-16

Top Cap 1-3/4" 16 ft Black Box Qty Only ** To extent of Inventory

  • Sold in box quantities only
  • 12 pieces per box
TC134-12

Top Cap 1-3/4" 12 ft Black Box Qty Only ** To extent of Inventory

  • Sold in box quantities only
  • 12 pieces per box
71-B1PH

LiftMaster Internal Brake Kit w/Solenoid 120/240V 1PH for L5 Operators

  • Works with Logic 5 commercial operators and SL585/SL595 U and UL gate operators
1005-2-8'

Aluminum Bottom Retainer U-Shaped 8' Long**Actual Length 8'1"**

  • For door thickness 2"
PB-BE101BP

Contact Block N/O Contact

  • Base mount
  • For use with RC P enclosures. IP65