Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login

CARSENSE-101

EMX Buried Driveway Alert Sensor XC101-LV Probe Sold Separately (CS101)

  • The CarSense 101 provides a solution for many vehicle detection challenges. Where safety is an issue the CarSense 101 detects moving vehicles in blind areas along a driving path and actuates warning lights.
  • For access control applications requiring free exit the CarSense 101 detects vehicles and actuates gates overhead doors and other parking barriers.
  • Controls and indicators are mounted on front panel
  • Available in 9 - 41 VDC 6 - 29 VAC.
  • Low 2.5 mA standby current consumption makes it an excellent choice for solar power applications.
  • Housed in a small relay-type housing
  • Surge protection
  • Use with either Probe-50 Probe-100 or Probe-150
41AC075-2

LiftMaster Circuit Board Assembly for Dual Capacitor Models 315Mhz ** To extent of inventory

  • Assembly includes: End panel Logic board and Light socket
  • For chain drive units with two lights ie..3575 3585 3595 PD752D and PD758D
  • Also known as 41AB075-2 41AC075-2 041AC075-2A
BK110/PR

Light Duty End Bearing Plate 3-3/8" with Bearing - EBF 338 Residential Sold as a Pair - LH/RH

  • With C16-32F bearing
  • Galvanized steel
  • 3-3/8" shaft offset
  • Flange allows plate to be bolted to the wall for additional support
  • Same as part number 209
GRD-2

Linear 2-Channel Delta3 Gate Receiver 310 MHz (DNR00102)

  • Auto voltage sensing - no jumpers to set
  • Two Form ”A” (normally open) relays rated at 30 Volts AC/DC up to 5 Amps
  • Supplied with whip antenna three feet of coaxial cable and bulkhead connector
  • Power: 12 - 30 VAC or 10.5 - 30 VDC
  • Codes: 128 (set by dip switches)
  • RF frequency: 310 MHz
  • .......more details
MGR-2

Linear 2-Channel MegaCode Gate Receiver 318 MHz *** To Extent of Inventory

  • Two Form ”A” (normally open) relays rated at 30 Volts AC/DC up to 5 Amps
  • Supplied with whip antenna three feet of coaxial cable and bulkhead connector
  • Memory: storage for up to 40 MegaCode transmitters
  • Power: 12 - 30 VAC or 10.5 - 30 VDC
  • Codes: 1000000+ (MegaCode format)
  • RF frequency: 318 MHz
  • .......more details
QUICK_CLOSE

Commercial Quick Close Device / Universal Timer V8

  • This device will automatically close the door as soon as the vehicle passes through the safety beams.
309013

Linear 1-Channel Multi-Code Receiver 310 MHz

  • Three tabs for universal mounting
  • One N/O relay
  • Compatible with 310 MHz Stanley and Multi-Code transmitters only.
  • Operates on 24 VAC power
  • One channel
  • Codes: 1024 (set by dip switches)
  • .......more details
MK00641

Micanan Smart 10.0 Full Feature Circuit Board Monitored with 5 Relays

  • For 1/3 1/2 and 3/4 Hp - 110/220V 1p 230V 3p
  • Board has P1 & P2 terminals
  • Up to 20 transmitters can be programmed
PL-A03-NEW-BRD

Lynx Replacement Logic Board New Version

  • New version board works on operators with a red cover
  • Replacement logic board for Napoleon/Lynx Proline garage door opener
  • For openers built June 2008 or later (date code 0806 or newer)
  • This board does not have a transformer.
H14GHALF

Half Hinge #1 x 14 gauge

  • Bright zinc plated 14-gauge steel hinge
  • For use with 7/16" diameter stem rollers
  • Full body hinge 1-5/8" wide with slotted holes
RADIO-RE101C

Manaras Factory Installed Mod plug-in receiver for Board 70 operators 390 MHz

  • Direct ECB plug-in receiver card (factory installed)
  • 16 transmitters maximun per receiver.
  • Use part # RADIO-KIT004 when adding or replacing on-site.
  • This is now standard equipment on all Circuit board operators
RADIO-14

Manaras MR-1000 1-Channel 24V Receiver 313 MHz ** Replaced by RADIO-RE900

  • Controls one operator with MT series transmitters.
  • Operates on 24VAC.
  • A LED indicates that the unit has been activated.
  • Can be installed directly onto the control box of a Manaras operator.
831-RJ

Allstar 1-Door O/C/S Receiver in Oil Tight Case (JIC) 107478 318 MHz *** To extent of inventory

  • Three channels - three relay outputs
  • Oil-tight JIC ABS case
  • Terminal strip for wiring
  • Wire whip antenna with "F" connector
  • Compatible with Allstar Classic Allister and Pulsar dipswitch transmitters and MVP quik-code transmitters
  • Power: 24 VAC/VDC
  • .......more details
HAE00048

Linear Helical Gear with Grease

  • Includes roll pins
  • Can be used on all Linear / Westinghouse residential operators.
  • Helical gear measures 2-7/8" diameter
BLOCK-BLUE

Spring Repair Blocks .2187-.3065 Pair

  • For the temporary repair of a broken spring.
  • Wire size: .2187 - .3065
27-24403

Truck Door Dual Torsion Spring Assembly 93/35 for Whiting Roll-Up Doors

  • Assembly includes: shaft LH & RH springs winding cones cable drums with bearings and spring spacers.
  • Springs are treated with rust preventative
  • Roadside cable drum is color coded RED
  • Specs: Shaft Length: 93" Spring Length: 35" Wire diameter: .187 Winding cone color: White
Z9403

Coupler 1" Bore Adjustable Silver

  • Malleable Iron for strength
  • Set screws and jamb nuts installed
  • 1" bore with 1/4" keyway
  • Thickness: 0.35"
  • Painted silver
02-111

LiftMaster Pull Switch Assembly *** Available to Extent of Inventory

  • Swivel end
  • Nema 1
  • Same as Pull Cord
25-60503

Truck Door T-Style Ramp Handles Curbside (Right)

  • Black plastic construction
  • Cross ref.: 39504-2
37028C.S

Genie Control Board for Model 2022 ** Repl. by 39537R.S (no cover)

  • For ReliaG 800 model 2022 gaarage door opener ◾ Genie 37028A Control Board for Genie Models 2022 2024 and 2042 Chain / Belt Drive Openers ◾ Works for the following models only: ◾ ReliaG 800 (2024) PRO Series 1 Piece Rail ◾ QuietLift 800 (2042) ◾ ChainLift 800 (2022)
DR2

Linear 2-Channel Delta3 Receiver 310 MHz *** NLA

  • Activates two devices
  • Wire lead antenna
  • 12 and 24 Volt models
  • Two-channel wireless radio control designed for use with automatic garage/gate operators and access control systems.
  • The receiver can be activated by any of the Delta-3 format transmitters
  • Mounting bracket supplied
  • .......more details
32-48-140

Extension Spring 8' Door - 140 lbs Blue ** Replaced by 27-48-140

  • Double - Loop
  • 32" long 48" stretch 140 lb load
  • Springs sold individually
RN1124

Roller 2" Nylon 4" stem 11 ball White

  • White Nylon Roller Wheel Diameter: 2"
  • Working Length: 3.75" Overall Length: 4.69"
  • Box qty: 150 Box weight: 49 lbs (2-4-11 White Nylon)
487132

Bircher Easy Loop D Vehicle Detection Microwave Motion Sensor ***TEST LOOP ONLY

  • Complementing loops with versatility for all applications
  • No need of ground loops - no construction work
  • Advanced 79 GHz radar technology with static object detection
  • Reliable activation presence and anti collision
  • Quick to install easy to configure via appy
  • Operating voltage: 9-24V DC
  • .......more details
CPT215-END-KIT-T3

Miller Edge End Kit for CPT215 Doide Capacitor (T3) Configuration

  • Kit contains: 2) Caps (2) cages (1) wired plug (1) diode capacitor plug (1) non-mon. plug (2) screws
TDC12X1BMC

LiftMaster MAXUM Trolley DC Comm. Op 3/4HP Equivalent 120/240V 1PH 60 Cycles/Hr 1200LB

  • Smooth Start/Stop Operation - DC high-efficiency motor and gearbox provides the power needed and smooth start and stop to reduce wear-and-tear on your door and operator.
  • Faster Speed - Average of 12” per second opening on sectional doors.
  • Battery Backup Option - (battery backup kit sold separately).
  • Floor-Level Wall Controller - 4-line LCD display gives you access to programming troubleshooting and diagnostics at floor level saving time and money.
  • Wi-Fi® and myQ® - Easily connect to myQ Facility via Wi-Fi for visibility into what is happening at your door and control it from your web browser; no need for additional hubs or accessories. Know what accessories activate the door (remote transmitter keypad etc.)
  • Drive Type 65:1 Gearbox with #50 Chain Output
  • .......more details
OTBHW-6112-AM06

Manaras Apt-Style Trolley Op w/Carwash Mod 1/2HP 120V 1Ph Monitored w/N4 Eyes Silencio

  • The Silencio operators have integrated noise reducing enhancements which make it 4X QUIETER than the Premium Trolley Apartment model (OTBH-A.05).
  • A low headroom apartment type garage door operator designed for use on industrial standard lift sectional doors with high cycling daily frequency requirements
  • Mounting (Low Headroom Design): Ceiling-mounted with only 6.25" headroom clearance required below the tracks. For indoor use only.
  • Dimensions: Back Room: door height + 4'5" (1350 mm)
  • Head Room For Tracks: 5.625" (143 mm) above the highest point of door travel
  • Comes with carwash modification and tracks/chain for doors up to 12ft
  • .......more details
RTBH-6114-AM06

Manaras Silencio HD Trolley Op. 1HP 120V 1PH Monitored VFD

  • The Silencio® RTBH-A.06 is a heavy-duty apartment type garage door operator designed for use on properly counter-balanced industrial standard lift sectional doors which possess high-cycling daily frequency requirements
  • Soft-Starts and Soft-Stops
  • Electrically activated drum-band type solenoid brake
  • Ceiling-mounted with 8.69" headroom clearance required below the tracks
  • Dimensions: Back Room: door height + 4'5" (1350 mm) Head Room For Tracks : 5.625" (143 mm) above the highest point of door travel
  • Tracks sold separately
  • .......more details
202-0019

TNR Bottom Bar Arm Black Harness 75D (2622126) ** Price by Quote Only

  • same as 2622126
MSJ-6113-M-N1-RH

Manaras MSJ 3/4HP 120V 1Ph Monitored Board w/N1 Eyes RH

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 35 cycles per day > 150 cycles per day
  • .......more details
FAAC-844-115V

FAAC 844 Slide Gate Operator 115V

  • The FAAC Model 844 automated system for sliding gates is an electro-mechanical operator transmitting motion to the sliding leaf via a rack or chain pinion appropriately coupled to the gate
  • The non-reversing system ensures the gate is mechanically locked when the motor is not operating and therefore no lock needs to be installed
  • Control Board: model 780D
HA-434TL

SkyLink Wireless Motion Sensor

  • Supervised Sensor: monitors the sensors and their battery condition automatically
  • Motion detecting range: 40 feet.
  • Operating range: Up to 800 feet.
  • Easy to set up (Battery not included).
  • FCC/IC approved.
  • Sensors are weatherproof but not waterproof. Sheltering it from the elements is recommended
  • .......more details
WASHER035

Manaras Belleville Washer 31.5 x 16.3 x.08mm Zinc Plated

  • Used on serveral models
BRKIT002

Manaras Brake Resistor for 240V Rapido

  • Added option to RSH or RVH operators
02-101

LiftMaster Single Button Nema-1 Pushbutton Control Station

  • Surface mount
18211

Limit Switch LS1 G3M Male

  • For use with Rite-Hite dock levelers
10MS41-S

BEA Magic Switch Touchless Stainless Steel Single Gang***NLA Replaced by 10MS31U-B

  • BEA’s MAGIC SWITCH® Family provides a highly accessible and germ-free door activation without physical contact.
  • Reduce touchpoints in fast-paced environments that depend on sanitation like healthcare retail industrial and commercial settings.
  • Using microwave technology BEA’s MS41 produces a detection field with a reliable and consistent transmission in interior and exterior applications.
  • Capable of detecting a moving hand cart or wheelchair.
  • Plus an adjustable hold time offers flexibility to meet ANSI standards.
  • The durable design suits sterile wash-down applications such as surgical wash-down clean room and pharmaceutical environments.
  • .......more details
EHJW-311-1/2

Doorlec Ind Jackshaft Op. Watertight ECB 1/2 HP 115V-1Ph

  • Heavy-Duty Industrial Operator with Waterproof Mod. for Sectional or Rolling Steel Doors
  • DC-2000 logic with adjustable Timer-To-Close Delay On Reverse and Traffic Light Control (monitored board optional)
  • Solenoid Brake prevents coasting and secures the door when closed
  • TEFC (sealed) continuous duty electric motor with overload protection
  • Automatic Friction Clutch protects the door and operator
  • Self-aligning Heavy Duty sealed Pillow Block bearings on all shafts for high cycle applications
  • .......more details
CDJH-34-115-CON-R

Lynx CDJH Heavy-Duty Jackshaft 3/4 HP 115V Contactor Right Hand

  • 3 Button station (NEMA 1)
  • 1650 RPM high starting torque motor with overload protection
  • Inherent Mechanical Brake (I.M.B)
  • B2 Mode C2 Mode D1 Mode E2 Mode T Mode TS Mode
  • On board Open Close & Stop for ease of setting limits
  • Pre-wired to accept sensing devices
  • .......more details
24856

Stanley Front Idler Kit for Chain/Cable Openers *** NLA

  • For Stanley Chain/Cable Openers Only
  • Not for Stanley Full Chain Openers
  • Replaces Part #920-0147
RENO-B4

RENO 11-Pin Amphenol Style Connector 12-24V Single Channel Loop Detector *** To Extent of Inventory

  • The Model B is a full featured single channel dual output vehicle detector that incorporates the reliable vehicle detection technology found in all of Reno A & E s vehicle detectors.
  • All detector functions and settings are configured by using a set of eight internal DIP switches and a front panel mounted pushbutton switch
  • Dimensions: 11-Pin Models - 3.00 inches (7.62 cm) high x 1.75 inches (4.45 cm) wide x 4.30 inches (10.92 cm) deep
A123300SGLPK

LiftMaster Battery w/ Harness Single 33AH 12V

SP-24

EMX Surface Mounted Loop Pad e/Wire Guard

  • Designed to fit between the guide rails in automated carwash systems.
  • Made with durable polypropylene this sealed pad can stand up to carwash detergents.
  • Able to detect up to 30 inches high when coupled with EMX’s line of vehicle loop detectors.
  • Size: 23.75” x 23.75” x 1”
  • Material: black polypropylene
  • Lead-In: 50 feet shielded twisted pair
  • .......more details
ERN

Erone 4-Channel Transmitter 433MHz

  • Innovantive and extreme crashworthiness
  • Casing: aluminum and black polycarbonate
  • Range (line of sight): up to 250 m (820 ft).
  • Dimensions: 70 mm x 40 mm x 10 mm (2.75 in. x 1.57 in. x 0.4 in.)
  • Comes with: One lithium battery (2032)
  • Optional 26-bit Wiegand proximity tag built-in: ERN (old #S7TR2641E4T (HID) old # S7TR2641E4M (Mifare)
  • .......more details
CHAIN059

Manaras #41 chain 48 Pitch (24" long)

  • Includes 1 chain link
111503.0002.S

Overhead Gear Reducer 40:1 RHX

60-6560-C-YELLOW

Speed Bump Yellow 36" Econo Light Weight for Concrete *** NLA

  • A standard speed bump system section includes (2) main pieces (2) endcaps x 5” long and (1) connector clip.
  • Main pieces may be added and connected to form larger units.
  • 36” long x 10.5” wide x 2” high (main piece)
  • EndCap: 5” Safety Snap On End Cap - sloped modular profile prevents tripping by pedestrians.
  • Yellow Plates: Each speed bump section is embedded with (6) yellow safety plates of weather resistant composite material for protection from salt freeze and thaw.
  • Can be used as a cable cover - bottom sides include 1” x 1½” channels for protecting temporary or permanent cables or hoses.
  • .......more details
ME123-2M-BLK-LH

Miller Edge Black LH 2-Wire Monitored 2" wide x 1-1/2" high Sold by the Foot

  • Electromechanical slide in edge for sectional doors and sliding gates.
  • Touch sensitive singaling allows for immediate stopping and reversing of motion
  • Temperature range: -30F to 155F
  • Lead wire: 22 gauge universal
  • Sensitivity: nominal 6-8 PSI
  • 2 wire NO configuration
  • .......more details
CAP378

Capacitor 110/125VAC 378-454MFD

  • 378-454 mF 125 VAC 50/60 Hz
  • Used on 1/2 HP LiftMaster operators
26124

Doorlec Clutch Shaft 11-3/4" x 5/8" LJH

  • Previous shaft size was 11-3/4" but have now been replaced by 12-5/8" to accomodate larger box size
FLO1

NICE 1-btn Dip Switch Remote 433.92 MHz

  • Nice 1 Button 433.92MHz radio-control with programmable code - 1024 combinations.
  • Contains 10 DIP switches inside for coding.
  • Battery included: 12V (GP23A)
  • Dimensions: 72 x 15 x 40 mm
BG790-5021

LiftMaster Ind-Duty Wishbone Barrier Gate Op 1/2 HP 230V 1Ph - Comes w/Arm & Counterweight

  • A reliable gear-driven barrier gate operator that is perfect for industrial applications.
  • This barrier gate is designed for Wishbone-Type Arms with lengths of up to 24 ft.
  • The BG 790's powdercoated weather-resistant steel enclosure and its 1/2 HP commercial motor ensure strong dependable performance.
  • Standard Features: Control inputs and Adjustable limit settings
  • 02-102 Open/Close Push Button Included
PPV3M

LiftMaster Passport MAX 3-Button Visor Remote

  • Provides total control with one remote for gated communities and commercial properties.
  • Compatible with the PPWR Receiver for gate access control all 315MHz Security+ LiftMaster and Elite Series Gate Openers and all LiftMaster Garage Door Openers manufactured since January 1995
  • 2x the range of standard remote controls
  • Narrow-band transmission on 3 simultaneous frequencies (310 MHz 315 MHz 390 MHz)
27222A

Genie Sprocket Bushing *** To extent of Inventory

  • For Genie Chain Drive or Belt Drive Channel Rails.
  • Fits the following models: PMX700 PMX1200 GPS00-IC GPS1200-IC
  • Available to extent of inventory
MV-00237

Micanan Key Switch O/C/S Btn Tamper Proof w/Best Core Cylinder Nema 4 Surface Mount

MR-00021

Micanan Trolley Chain Drive # 41 792 Links for 3/4 1 HP 14ft High Door

PO17

Overhead Door Bottom Astrigal Rubber for Rolling Steel Doors Sold by the Foot

MIRF-Z2

Miller Edge Patriot 2 Photo Eye Fail Safe 30ft Non-Contact

  • Meets current UL325 standards for commercial door and gate operators*
  • Thru Beam technology minimizes false reflective signals
  • Travels with the door
  • Easy to Align
  • No need to stock special sizes - works up to 30 feet wide or up to 50 ft wide depending on the model
  • Convenient - Assemble and install in the field
  • .......more details
37355

Reversing Contactor 120V Coil

40-3505

LiftMaster Gate Warning Sign Plastic English

19-41119M

LiftMaster Roller Chain #41 with Master Links 59-1/2" Long

  • Same as: 195105 19-41119MB 19-4119M 1941119M
25-60100

Truck Door Fork Lift Plate

  • Steel Construction
  • Black E-coat finish
  • Allows use of fork lift to open door from truck bay or when loads shift against door
  • Cross Reference: T # 69131 W #1092
  • Dimensions: 18" long x 5.5" tall with 1.5" lip
CF-101-12

Commercial Side & Top Weather-Strip 12' Long Aluminum / Vinyl

  • Same as Garaga CF101
PRO-H-5011E-LH

Micanan 1/2HP 115V 1P Hoist Operator NM ECB No Eyes Left Hand

  • Continuous duty belt drive jackshaft operator with emergency chain hoist
  • Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
  • Solenoid brake OPTIONAL
  • Non-monitored board NO photoeyes
  • On-Board receiver holds up to 20 transmitters
41C5141-1

LiftMaster Square Rail Trolley Kit Chain Drive

  • Same as: 062313 41C5141 41C5141-1
  • Compatible with all Chamberlain and Craftsman square rail chain drive models
TRACKS-SET-3

3" Tracks Set with Wall Brackets *** By Quote Only

  • Custom order to customer's needs
ULTRA-II-D-TEK

EMX Industries Plug-in Loop Detector (2663-1)

  • Features a slim design that is compatible with most gate operators that require a dry contact relay input.
  • No harness required; comes with terminal screw adaptor
  • ULTRAMETER™ (displays optimum sensitivity setting / diagnostic aid)
  • Frequency count/reset switch
  • 10 sensitivity settings
  • Loop diagnostics
  • .......more details
WOR

Linear Wiegand Output Receiver 318 MHz

  • Designed for use as an access control interface for Linear’s block coded digital transmitters.
  • The unit receives signals from transmitters adds a facility code to the data and sends the information to the Wiegand input of the access control panel via a 5-wire connection
  • Ideal way to facilitate handicapped access
  • Multi-button transmitters can double as personal emergency devices for triggering security alarms
  • RF input/Wiegand output receiver supports 26 30 and 31-bit data formats
  • Wide selection of MegaCode (over 1 million codes) format transmitters with available block coding
  • .......more details
ALUM-523

Aluminum 24" x 100' Spool Slate / Charbon # 523

  • 20% thicker than the aluminum sold in retail stores (0.022" )
  • Gentek # 523
  • Reverse side is #431 Bright White
745266

Strobe Low Profile Amber LED Warning Light 12-24VDC

  • Fully encapsulated electronic circuitry ensures a lifetime of trouble-free operation.
  • Installer can select the flash pattern of each high intensity strobe by wiring the unit according to the flash rate preferred.
  • 4 7/8" X 5 7/8" Rubber base Surface mount 12-24VDC
124844

1" Nylon Bushing

MD-00035

Micanan Offset Link #410

MALED12

LiftMaster LED Barrier Arm 12 ft

  • The NEW LED Barrier Arm provides exceptional visibility 24 hours a day.
  • Durable aluminum arm with integrated red LED lights on one side and Red/White DOT tape on both sides.
  • Ideal for use with the Mega Arm and Mega Arm Tower
IS40P

BEA Presence Sensor

  • Infrared presence sensor for use in industrial applications. The sendor utilizes 40 active infrared spots for reliable detection.
  • Ideal for use on automatic industrial doors vehicle gates/barriers and loading docks.
  • Equipped with 9 pre-programmed pattern configurations for various industrial applications.
  • Various learn time settings allow presence detection to either remain constant or ignore a motionless object after a pre-determined period of time.
  • Mounting height: 8-16'
  • Detection field: 10'x10' at max. mounting height of 16'
  • .......more details
ME120-C

Miller Edge Aluminum Mounting Channel Sold per Foot

  • 1-1/16" Wide 9/16" High
MWTA12

Miller Edge Transmitter with Audible Alarm Small *** No Longer Available

  • The MWTA12 safety edge transmitter is designed to provide wireless signal transmission form the safety edge to the motor controls.
  • It is easily mounted and wired to the gate or door edge sensor. When the sensing edge comes into contact with an obstruction a closed circuit signal is created and is sent to the transmitter.
  • The transmitter relays the information to the receiver and the receiver passes the signal along to the operator motor.
  • The gate or door stops movement and will then reverse the direction of travel.
  • Comes with an Audible Alarm feature that activates when the battery is running low and needs to be replaced.
  • Comes standard with a NEMA 4 weather-proof enclosure. The enclosure can be easily mounted with the four mounting holes and screws provided.
  • .......more details
P219-1

Heddolf 1-Button Mini Transmitter 318MHz ** Available to Extent of Inventory

  • Open/Close mini remote for 1 door
  • 8 dip switch
  • Allstar compatible
OSH-6534-ECB

Manaras Opera-SH 1 HP 600V 3 Ph with Electronic Circuit Board

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
  • .......more details
BOARD070ER

Manaras Replacement Control Board (No Monitoring)

  • On-board 390MHz radio receiver accepts 50 remote controls
T751L5

LiftMaster 3/4 HP 115/230V 1P Commercial Trolley Operator Logic 5 *** No Longer Available

  • Trolley low profile with brake
  • Suspended from the ceiling the operators are used on sectional overhead doors with standard lift.
  • T operators are directly attached to drive and control the door.
  • MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
  • Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.
AK-21

Linear Interior Digital Keypad***to extent of inventory

  • The keypad is housed in a rugged plastic enclosure and is designed to be mounted in a standard single-gang electrical box. The die-cast keys have bright easy-to-read yellow graphics.
  • It is supplied with four different plastic snap-on mounting bezels to customize the look of the keypad. The satin-chrome bezel comes factory installed on the keypad. The white ivory & bronze bezels are packaged separately.
  • Up to 480 entry codes from 1 to 6 digits in length can be programmed. They can activate either or both of the relay outputs.
  • Relay #1 has a 5 Amp capacity. Relay #2 has a 1 Amp capacity. The relays can be set for timed or latch-on/latch-off toggle operation per each individual entry code.
  • The on or off toggle state of a relay is maintained even after power interruption. When power is restored to the keypad each relay will assume the state it was in when power was removed.
34538R

Genie Up Limit Switch Assembly 66" Wire

  • For up direction on a ChainGlide System using magnetic limits
  • For models: 350ML 500ML 700ML 800ML and other ML Series ChainGlide door openers
  • Also for Overhead Door Python ChainGlide garage door openers
  • 66" inches of wire attatched
MWR12

Miller Edge 1-Channel Receiver RF 318 MHz *** To Extent of Inventory

  • The MWR12 receiver is designed to receive information from the transmitter and relay it to the motor to stop or reverse motion if the edge comes into contact with an obstruction.
  • Power requirements: 10 to 40 VDC 10-30 VAC
  • Output: dry relay contact N/O and N/C 1A @60VAC
  • Operating temperature: -40C to 60C
  • Maximum operating distance: 100ft
  • Electrical configuration: optional N/O or N/C
  • .......more details
24851

Stanley Traveler Carrier Kit

  • Works with all Stanley chain drive units from 1992-present
  • Same as part no. 9200014
  • Trolley slider for part no. 49563
20-1100C-2P

LiftMaster Electric Motor 1HP 115/230V 1P

  • Replacement motor for SL595
36179R

Genie Traveler Assembly for Screw Drive

  • Fits model 3060 L/M
  • Replaces: 25589R 25589S 25589C 20414R 34107R 20073R & 24357R
71-199010

LiftMaster 12' Sash Chain Pack with Keyring

  • Common disconnect chain
ME123-YELLOW-LH

Miller Edge Yellow Left Hand Outlet 2-Wire 2" wide x 1-1/2" high Sold by the Foot

  • Electromechanical slide in edge for sectional doors and sliding gates.
  • Touch sensitive singaling allows for immediate stopping and reversing of motion
  • Temperature range: -30F to 155F
  • Lead wire: 22 gauge universal
  • Sensitivity: nominal 6-8 PSI
  • 2 wire NO configuration
  • .......more details
MK00488

Micanan Electronic Circuit Board Monitored

  • Replacement board for PRO-LH (50-11)
  • Board has terminals P1 & P2
  • Up to 20 transmitters can be programmed
RADIO-29

Manaras Commercial Receiver Antenna

  • Commercial receiver coaxil antenna
BLOCK-RED

Spring Repair Blocks .3750-.4305 Pair

  • For the temporary repair of a broken spring.
  • Wire size: .3750 - .4305
H11G04

Hinge #4 x 11 gauge

  • 11 gauge # 4 hinge - 0.72 lbs
  • Bright zinc-plated steel construction
  • For use with 7/16" stem rollers
27-20202

Truck Door Winding Cone for Dual Spring Assembly for Whiting Roll-Up Doors (2-3/16")

  • Zinc die cast construction.
  • Universal design that will work for both Curbside (RH) and Roadside (LH) wound springs.
  • Cross Reference: W #2518
  • 2-3/16" I.D.
MP-00001

Micanan Timer to Close 24V Modification

  • 3-button o/c/s function timer will start counting from fully open reverse and reset from any device
  • 24V modifictation available on control circuit ( R) and ( M) and is included with the new full function smart board (E)
.243-2-R

Cut-to-Length Torsion Spring .243 x 2" Right Hand Wound White/Yellow

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
LDM-1

Long Distance Module

  • Compatible with all door and gate operators that use 24V AC
  • 20 mile range
Z9961

Maxum Operator Mounting Bracket

  • Compatible with MAXUM® Jackshaft operators
  • Eliminates the need for a spreader arm by mounting a fixed bearing on the operator adjustment plate preventing the torsion shaft and operator from moving closer together
  • Precise chain tension adjustments through the adjustment bolt
  • Maintains parallel alignment between the operator output shaft and the door’s torsion shaft during chain tensioning
  • Operator installation is made easier by allowing the bracket to be hung on the torsion shaft via the bearing supporting its weight during fastener installation thereby removing the need to hold the operator manually
  • Has physical tick marks on both sides of the bracket and at the center of the bearing plate to indicate the torsion shaft’s center position allowing bracket to be accurately mounted prior torsion shaft installation
  • .......more details
MA200

LiftMaster K1 Relay option for MA MAT and MAST Barrier Gate Operators

  • used with Mega Arm Barrier gate operators to control traffic lights etc
10PBS61

Push Plate 6"" Square Text+Logo Stainless STL .093 Thru Holes

  • 1/16" thick stainless steel for maximum durability
  • Single- pole 1 A COM/NO/NC UL recognized
  • Compatible frequencies: 900 433 or 300MHz
  • Includes mounting hardwaare flag connectors and hex key
MB-01204

Micanan Electric Motor Only 1/2HP 575V 3PH

  • C-Flange motor fits: GT GH GHC GSD