Devanco Canada - Get The Right Garage Door Opener‎ and Parts

Special-Order. Price by Quote Only
Automated battery backup - the unit continues to work on batteries with full functionality (but does move more slowly) until the unit gets to about 75% of battery capacity then transitions to push and hold operation.
The 300 series also works with and powers 12V automatic lock systems
Option available: 5-conductor cable (5') to reduce the risks of miswiring incidents available in 5' 10' 15' 20' or 25' lengths
Integrated software fuse that shuts down the unit to help prevent board component disasters should these be incorrectly installed on grossly imbalanced or improperly sized doors.
30:1 40:1 50:1 gearbox ratio are available. Please specify when ordering

.......more details

SUPPORT002

Manaras Board Support Rivet 0.236" Black ** Special Order Only

51-013611

Blue Giant Sensor Wand Flat 21 inch **Special Order

Price by Quote Only

PPK3PHM

LiftMaster Passport MAX 3-Button Keychain Remote w/Proximity Sensor

Compatible with the PPWR Receiver for gate access control all 315MHz Security+ LiftMaster and Elite Series Gate Openers and all LiftMaster Garage Door Openers manufacture since January 1995
3-button keychain remote with proximity sensor
2x the range of standard remote controls
Narrow-band transmission

P-8833T

Pulsar 3-btn 3-Door Transmitter 108817 318 MHz

Allstar compatible
Three channel transmitter
8 dipswitches 318 MHz

7176.235*34.930

Whiting Heavy Duty Torsion Assembly .235 x 34" shaft 93"

K41-0240-000

LiftMaster Idler Sprocket Qty 2 IHSL24UL

41-0240-000 is a Idler Sprocket Service Kit. Compatible with LiftMaster® IHSL24UL Series Industrial Heavy Duty Slide Gate Operators. Complete kit includes: (2) Idler Sprockets. Check the installation manual or replacement parts diagram for specific part information before ordering to ensure compatibility.

PRO-HBH-7521U-L

Micanan 3/4HP 230V 1P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Left Hand (Pro-HHD)

3/4 HP230V 1PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
N-1 Through-beam (MK-00649) photocells included. Other options available.
3-btn O/S/C (02-103) wall control station included
Adjustable Friction Clutch 5L320 drive belt
#50 Roller chain 18 tooth door sprocket included

.......more details

7176.218*325.910

Whiting Heavy Duty Torsion Assembly .218 x 32.5" shaft 91"

7176.218*29.091

Whiting Heavy Duty Torsion Assembly .218 x 29" shaft 91"

TS-1-111-GALV-KEY

Tube Shaft 1" x 111 (9'.25) Galv w/KW 1/4" x 3/8"

When ordering order one foot longer that actual door width
Comes with 3 keys 1/4-3/8-3'' long

ME210-C3

Miller Edge Black Rigid PVC Mounting Channel "L" Shape Sold by the Foot

Used on CPT-210 extrusion

15-50B50LGH

Sprocket 50 Teeth 1" Bore 1/4" Keyway w/SS

Same as 71-1550B50LGH

K76-34697-3

LiftMaster APS Encoder with Harness 12V

For use with various LiftMaster® Commercial Gate Operator Models such as RSL12UL

GALV-343-6-L

Cut-to-Length Torsion Spring .343 x 6" Left Hand Wound Galvanized Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-600-INSTALLED

GAREX-24X12-GLASS

Garex Thermo Window Clear 24" x 12" Glass Only

An original Garex glass No frame

GAREX-24X12-WHTE

Garex Thermo Window Clear 24" x 12" White Frame

An original Garex window
Fits 1-3/4" thick door R16

IP-MDSF

CDVI Point of Entry Exterior Multi-Tenant Flush Mount Video Intercom System

Intercom system designed for multi-tenant residential and commercial properties providing video entry via IP with a free to download smartphone app.
Ideal for outdoor use on apartment buildings (up to 500 tenants) or commercial properties.
Features a 170 degree fisheye camera 5" touchscreen menu and integral dual technology card reader.
IP54 (recommended to be put under a canopy or covering)
Operating temperature: -10C to 50C
Stainless steel panel

.......more details

MCB-DR-SH-ASSY

Lynx Clutch/Drive Shaft Assembly MCB 3/4" x 11-3/4"

For trolley operator

GAREX-PAINT-IRN-ORE

Garex Touch-Up Paint Iron Ore

OGH-6214-M-N1-RH

Manaras 1 HP 240V 1Ph Gear Head Operator with Monitored ECB N1 Eyes Right Hand

A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
Includes a self-engaging chain hoist for manual operation
25 cycles per hour 80 cycles a day
Hoist on right side standard can easily be moved to the left in field
Full overload protection
BRACKET112 must be used for wall mounting

.......more details

E/BLOP/123

Automatic Systems 3 Kits of Two LED Lights on Arm Option

Increases visibility of the arm on BL229 gate operator

10-BR2900

BEA 2 Relay Logic Module + 900MHZ Wireless Technology

2 relay logic module ideal for applications requiring sequencing of electric locking devices and automatic door activation.
Day/Night mode allows users to designate "secure" or "unsecure" access for controlled entry points.
Push plates with wireless transmitters can be programmed to operate during specific time periods.
Programmable transmitters per receiver: 75 (unlimited for universal timer)
Input: DRY contact
Temperature rating: -22 to 158F

.......more details

K21-16699

LiftMaster Transformer 120/240V 75VA 24VAC

For use with various LiftMaster® Speed Jack Commercial Door Operators

MGH-6534-M-N1-LH

Manaras 1 HP 600V 3P Jackshaft Monitored w/N1 Eyes Left Hand

A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
Electrically activated drum-band type solenoid brake
Full overload protection

29201

Doorlec Transformer 460V pr 120V sec 35VA

460V prImary 120V secondary 35VA

GALV-393-6-L

Cut-to-Length Torsion Spring .393 x 6" Left Hand Wound Galvanized Orange Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-600-INSTALLED
Galvanized

GALV-343-258-R

Cut-to-Length Torsion Spring .343 x 2-5/8" Right Hand Wound Galvanized Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

GALV-319-258-R

Cut-to-Length Torsion Spring .319 x 2-5/8" Right Hand Wound Galvanized Blue/Green

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED
Galvanized

GALV-312-258-L

Cut-to-Length Torsion Spring .312 x 2-5/8" Left Hand Wound Galvanized Yellow

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED
Galvanized

GALV-250-334-L

Cut-to-Length Torsion Spring .250 x 3-3/4" Left Hand Wound Galvanized Price per Inch

Priced per inch
For factory installed cones priced seperately - use part no. C-334-INSTALLED

2806.177*290

Whiting Spring Assby .177 x 2-3/16 x 29" Roadside

Replacement torsion spring with cones
Specs: .171 x 2-3/16" x 29" Long
Roadside
For Curbside order part # 2807.177*290

BL229-EX1929-D45

Automatic Systems Rising Barrier Gate with 14'9" Round Arm Right Hand

K41-0380-000

LiftMaster Bridge Rectifier 700/1200

For Maxum ops

K41-0381-000

LiftMaster Toroidal Transformer 700lb / 120VAC-240VAC

For Maxum ops

K41-0409-000

LiftMaster 1200 Extended Duty Motor Gear Box Encoder Trolley

For Maxum Trolley 1200 Op

K41-0410-000

LiftMaster 1200 Extended Duty Motor Gear Box Encoder Hoist

For Maxum Hoist 1200 Op

K41-0374-000

LiftMaster 24VDC Motor Gear Box Encoder (Jackshaft 700)

Maxum J-700

GSD103L5R

LiftMaster Heavy Ind-Duty Slide Operator 1HP 208/230/460VAC 3PH

GALV-406-6-R

Cut-to-Length Torsion Spring .406 x 6" Right Hand Wound Galvanized Blue/Yellow Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-600-INSTALLED
Galvanized

8087.207.320

Whiting .207 x 2-5/8 IN x 32" Curbside with Cones

An original Whiting assembly

K41-0254-000

LiftMaster Electric Motor IHSL24UL

Compatible with LiftMaster® Model IHSL24UL Industrial-Heavy Commercial Slide Gate Operators.
Compatible with the following models: IHSL24UL IHSL24ULMC

GALV-393-6-144-L

Torsion Spring .393 x 6" x 12ft LH Galvanized Orange

Wire size: .393
Inside diameter: 6"
Length: 12 ft
Galvanized Stenciled

E/0172/166

Automatic Systems Spring Assembly

22019

Doorlec Push Button Contact Block N/O

E14500D

Cable Tie KSPEC STD 50 LB Black 14" Nylon 500/pkg

Length: 15" Width: 5.0MM (0.187")
Low insertion and pull through force
Advanced pawl and teeth design
Angled tail provides quicker initial insertion alignment
Tail finger grips allow easier handling and tightening
Rounded edges provide added safety and eliminate insulation damage

.......more details

GHW-383-1HP-RH

Doorlec Industrial Gear Head Door Operator 1 HP 208V 3P with ECB and Nema4 modification

Extra heavy-duty industrial-type electric door operator for damp environments.
Worm gear reducer 40:1 ratio
#50 roller chain and sprockets from operator shaft to door shaft. (#60 chain optional)
Door speed: 7 inches per second (approx.)
Adjustable torque limiter (also called friction clutch)
Rotary type limit switches

.......more details

TDC12X1BMC

LiftMaster MAXUM Trolley DC Comm. Op 3/4HP Equivalent 120/240V 1PH 60 Cycles/Hr 1200LB

Smooth Start/Stop Operation - DC high-efficiency motor and gearbox provides the power needed and smooth start and stop to reduce wear-and-tear on your door and operator.
Faster Speed - Average of 12” per second opening on sectional doors.
Battery Backup Option - (battery backup kit sold separately).
Floor-Level Wall Controller - 4-line LCD display gives you access to programming troubleshooting and diagnostics at floor level saving time and money.
Wi-Fi® and myQ® - Easily connect to myQ Facility via Wi-Fi for visibility into what is happening at your door and control it from your web browser; no need for additional hubs or accessories. Know what accessories activate the door (remote transmitter keypad etc.)
Drive Type 65:1 Gearbox with #50 Chain Output

.......more details

TDC_Installation-manual TDC_Manuel-installation Data sheet Fiche technique Quick connect guide Guide de connexion rapide Ordering guide

31373-114

Doorlec Sprocket 60B36 1-1/4" Bore

TDC1222-16

Liftmaster Comm. 16FT Trolley Angle set (10-5816-P x 2) and #41 chain pack (TDC41-16) ***Actual length 227"***

Double Angle Rails for doors up to 16'6" high
Includes #41 chain pack

GH4416-40

Green Hinge 4-Panel Residential System Set

The Green Hinge System provides a close tight seal of your door to your building eliminating gaps and saving energy and money!
Patented spring-loaded garage door hinge system that allows automatic adjustment of the overhead garage door closing up to 1/4in side gap
Reduces dirt dust bugs rain & moisture
Quick and Simple installation
Fits Residential & Commercial Doors
100% Made & Assembled in the USA

.......more details

GALV-250-258-144-R

Torsion Spring .250 x 2-5/8" x 12ft RH Galvanized Green

Wire size: .250
Inside diameter: 2-5/8"
Length: 12 ft
Galvanized Stenciled

GALV-243-258-144-R

Torsion Spring .243 x 2-5/8" x 12ft RH Galvanized White/Yellow

Wire size: .243
Inside diameter: 2-5/8"
Length: 12 ft
Galvanized Stenciled

OMJ-6112-M-N1-LH

Manaras Medium-Duty Jackshaft Operator 1/2 HP 120V with Monitored Circuit Board N1 Eyes Left Hand

Designed for use on standard high and vertical lift sectional doors
Can also be used on small rolling doors and grills
Single phase intermittent-duty motor has instant reverse and internal automatic reset thermal overload protection
Mechanical brake
Floor level disconnect mechanism which must be engaged for manual push-up operation
14 cycles per hour 50 cycles per day

.......more details

MGH-6536-M-N1-RH

Manaras 2 HP 600V 3P Jackshaft Monitored w/N1 Eyes Right Hand

A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
Electrically activated drum-band type solenoid brake
Full overload protection

EMX-1916-1

EMX Single Gold Hood For IRB-MON2/4X2 1 Piece Only

Gold coloured metal hood (1 hood)

BEA-10LIGHT-TG

BEA Modular LED Signal Light Segment Green

Signal lights for industrial and vehicle flow management applications.
LED signal modular lights offer customizable configurations with “build-your-own” lighting elements that share a common base and bracket.
These LED signal units are available in red green yellow and an audible alarm cap and can be stacked in a tower configuration with up to six modules.
Operating temperature: -40 to 122F
Nema 4/IP65
Base sold separately

.......more details

User Guide Datasheet

MOUNTSHAFT018A

Manaras Limit Shaft Kit MGH up to 1.5HP

For MGH MGT MGSL built from 2011 (Yellow C-Box) Limit chain size 410

VGD-RB-1/2T-10

VGD Red Beast Lever Hoist 1/2 Ton 10ft Chain ** Price by Quote

Compact design
Light weight robust construction
Fully machined lifting wheels
Grade 80 alloy load chain
Sealed bearings
Triple spur geared guarantees ef cient/reliable operation

.......more details

GH4416-50

Green Hinge 5-Panel Commercial System Set

The Green Hinge System provides a close tight seal of your door to your building eliminating gaps and saving energy and money!
Patented spring-loaded garage door hinge system that allows automatic adjustment of the overhead garage door closing up to 1/4in side gap
Reduces dirt dust bugs rain & moisture
Quick and Simple installation
Fits Residential & Commercial Doors
100% Made & Assembled in the USA

.......more details

GHW-311-1.5HP-RH

Doorlec Ind. Duty Jackshaft Carwash Op. 1-1/2 HP 115V 1P with ECB

With DC2000 logic board
Worm-Gear Jackshaft type Industrial operator NEMA 4/12

200R

Chain Hoist Wall Mount 3:1 200R-41B36-1" Torque Force (244687)

Ratio 3:1
Sprocket: 41B36 Bore: 1"
Includes: 26ft of hand chain 1/4" square key chain keeper and 3.6ft of #41 roller chain included with sprocket wheels.
Pull load hand chain: 35 lb max

5001-10-WHITE/BLK

Residential Side & Top Weather-Strip 10' Long - White Aluminum/Black Vinyl

Painted aluminum retainer with flexible dual fin black vinyl.
Residential use.

CGH755L5-LH

LiftMaster Gearhead with Brake and Carwash Mod 3/4HP 575V 3P L5 Left Hand

Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.

.......more details

25130

Doorlec Seal Oil CR6372

K94-37849-1

LiftMaster Electric Motor 1HP 3-phase

Replacement motor for SL595103U and SL595103UL

2200-333

Linear Key 3/16 x 3/16 x 1-1/2

GLASS-ONLY

Elton Sealed Glass Only Made to Order Quote Only

Thermal replacement glass only

11442

Limit Switch w/Roller Wheel Lever for MBAR

Used on M7BAR Ops

K23-11442

LiftMaster Limit Switch SPDT w/Roller and Lever

Same as 23-11442

GALV-363-6-144-L

Torsion Spring .363 x 6" x 12ft LH Galvanized Green/White

Wire size: .363
Inside diameter: 6"
Length: 12 ft
Galvanized Stenciled

K19-40720D-NP

LiftMaster Chain #40 Nickel Plated 30ft

Includes (3) Master Links.

GALV-295-334-L

Cut-to-Length Torsion Spring .295 x 3-3/4" Left Hand Wound Galvanized Blue Price per Inch

Priced per inch
For factory installed cones priced seperately - use part no. C-375-INSTALLED

GALV-262-2-R

Cut-to-Length Torsion Spring .262 x 2" Right Hand Wound Galvanized Red/Yellow Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

GALV-207-2-L

Cut-to-Length Torsion Spring .207 x 2" Left Hand Wound Galvanized Brown Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

DC-ADAPT125-100

Dyna-Hoist DC Series Adaptor 1-1/4" to 1"

TS125

Wayne Dalton Thermospan 125 Steel Panel

Wayne Dalton’s Thermospan® Model 125 sectional door features a foamed-in-place polyurethane core
Standard joint seal that provides a substantially higher thermal efficiency than industry standard polystyrene insulated doors
The Wayne Dalton Thermospan® Series doors are the only sectional doors in the industry with patented roll-formed integral struts on each section making them the most rigid doors available
Thermospan® Model 125 is suitable for commercial and industrial applications.

SP10W12V

LiftMaster Solar Panel Kit 12V 10W

Includes: (1) 10 Watt 12 Volt solar panel
Mounting bracket

BEA-10-WBA

BEA Universal Mounting Bracket

Extendable from 15.35" - 23.62"
-90 to 90 degree tilt range
Self Drilling screws provided
Carbon Steel Black Powder Coated

Installation Guide

RW-213-041

Fasteners Carriage Bolt 5/16"-18 x 3/4" Zinc Plated 1000/Box

Full length thread
Plated
Gr 2

TRANSF168

Manaras Transformer 480X600-240V 60HZ 1500VA Leads Rapido

480X600-240V 60HZ 1500VA LEADS

CRBH753L5-RH

LiftMaster Hoist Op. with Carwash Mod. 3/4 HP 208/230/460 VAC 3 Ph L5 Right Hand

H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door.
With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.

.......more details

2050Z

LiftMaster HD Roller Cage Bearing Hinge Bolt to Gate/Post Zinc Coated Sold Individually

Heavy Duty Roller Cage Bearing Hinge - Bolt to Gate Bolt to Post (Corrosion Protected Zinc Coated)
Heavy Duty Construction for Maximum Durability
Dependable Roller Cage Bearing Design
Even Weight Distribution
Five Times The Weight-Bearing Surface of the Nearest Large Hinge
Convenient Bolt-On Model

.......more details

2022691

FAAC Control Board for Model 741

OSH-6534-M-N1-RH

Manaras Opera-SH 1 HP 600V 3 Ph Monitored Board w/N1 Eyes RH

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
25 cycles per day > 100 cycles per day

.......more details

MOTOR481

Manaras Electric Motor 1 HP 600V 3PH TEFC Brake ** Special Order

689-LCN

LCN Door Closer 4040-XP Aluminum Finish

Cast iron cylinder with full-complement bearing
3/4" diameter piston
Double-heat treated steel pinion journal
All-weather Liquid X fluid
LCN Patented Green Dial spring force indicator
Universal non-handed

.......more details

GDI-HB330

GDI Direct Drive & Jackshaft HAML-RBH-2030 Nema 1 To Accept 1" Shaft Non Monitored

Compact & Light Weight - Fast Installation
Applications Include Car Wash Cold Storage Pharmaceutical Agricultural Food Facility Sectional Grilles and Rolling Steel Doors
Brushless DC High Reliability Hi Efficiency & Low Maintenance Motor
No maintenance GearMotor sealed stainless steel bearings no limit switches no belts or hydraulic cylinders to maintain
One Operator Handles all AC Voltage Applications (115/208/230/460 & 575V)
Soft start soft stop

.......more details

GDI-LG910

GDI Jackshaft & Trolley JDMG-LG-2030 Nerma 1 UL325 Photo Eyes Extra

Low Headroom at 4-3/4" (Trolley)
Dimensions: 11.35" x 4.3" x 4.3"
Motor type: Brushless DC
Max cyles: Open/Cose per day = 3200
One operator can handle all AC voltages - Single phase and three phase
No maintenance GearMotor sealed stainless steel bearings no limit switches no belts or hydraulic cylinders to maintain

.......more details

FAAC-844-115V

FAAC 844 Slide Gate Operator 115V

The FAAC Model 844 automated system for sliding gates is an electro-mechanical operator transmitting motion to the sliding leaf via a rack or chain pinion appropriately coupled to the gate
The non-reversing system ensures the gate is mechanically locked when the motor is not operating and therefore no lock needs to be installed
Control Board: model 780D