Devanco Canada - Get The Right Garage Door Opener‎ and Parts

.437_5-1/4"-LH

Torsion Spring .437 x 5-1/4" x 12ft LH Red/Green

Wire size: .437
InSide diameter: 5-1/4"
Length: 12 ft

.406_5-1/4"-LH

Torsion Spring .406 x 5-1/4" x 12ft LH Blue/Yellow

Wire size: .406
Inside diameter: 5-1/4"
Length: 12 ft

.331_5-1/4"-LH

Torsion Spring .331 x 5-1/4" x 12ft LH Red/White

Wire size: .331
Inside diameter: 5-1/4"
Length: 12 ft

.343_3-3/4"-LH

Torsion Spring .343 x 3-3/4" x 12ft LH Blue/Red

Wire size: .343
Inside diameter: 3-3/4"
Length: 12 ft

.312_3-3/4"-LH

Torsion Spring .312 x 3-3/4" x 12ft LH Yellow

Wire size: .312
Inside diameter: 3-3/4"
Length: 12 ft

.250_3-3/4"-LH

Torsion Spring .250 x 3-3/4" x 12ft LH Green

Wire size: .250
Inside diameter: 3-3/4"
Length: 12 ft

.283_2-5/8"-LH

Torsion Spring .283 x 2-5/8" x 12ft LH White

Wire size: .283
Inside diameter: 2-5/8"
Length: 12 ft

.250_1-3/4"-LH

Torsion Spring .250 x 1-3/4" x 12ft LH Green

Wire size: .250
Inside diameter: 1-3/4"
Length: 12 ft

71-B575H

LiftMaster Interior Brake Kit with Cable 575V (Logic 3 4 and early 5 Disc and Pad Models)

Interior mount brake kit for operation with chain hoist
Includes solenoid

Instruction Manual

29-31245

LiftMaster Relay 12VDC 250VAC 4-Pin SPDT C & D relay 3-phase only

C & D relay 3-phase only

41A5266-1

LiftMaster Brackets for Snappy Sensors (41A5266-3) *** Discontinued

For units from 1993- present equipped with safety sensors
Same as 41A5266-3
For use with with 41A5281
New Gen (2021+) snappy beam sensors 041-0136 are compatible with these brackets and the new 041-0155 brackets
The new brackets (041-0155) are not backwards compatible

.421_5-1/4"-RH

Torsion Spring .421 x 5-1/4" x 12ft RH Gold

Wire size: .421
Inside diameter: 5-1/4"
Length: 12 ft

.295_5-1/4"-RH

Torsion Spring .295 x 5-1/4" x 12ft RH Blue

Wire size: .295
Inside diameter: 5-1/4"
Length: 12 ft

.283_5-1/4"-RH

Torsion Spring .283 x 5-1/4" x 12ft RH White

Wire size: .283
Inside diameter: 5-1/4"
Length: 12 ft

.437_3-3/4"-RH

Torsion Spring .437 x 3-3/4" x 12ft RH Red/Green

Wire size: .437
Inside diameter: 3-3/4"
Length: 12 ft

.406_3-3/4"-RH

Torsion Spring .406 x 3-3/4" x 12ft RH Blue/Yellow

Wire size: .406
Inside diameter: 3-3/4"
Length: 12 ft

.375_3-3/4"-RH

Torsion Spring .375 x 3-3/4" x 12ft RH Yellow/Green

Wire size: .375
Inside diameter: 3-3/4"
Length: 12 ft

.312_2-5/8"-RH

Torsion Spring .312 x 2-5/8" x 12ft RH Yellow

Wire size: .312
Inside diameter: 2-5/8"
Length: 12 ft

.250_2-5/8"-RH

Torsion Spring .250 x 2-5/8" x 12ft RH Green

Wire size: .250
Inside diameter: 2-5/8"
Length: 12 ft

.207_2-5/8"-RH

Torsion Spring .207 x 2-5/8" x 12ft RH Brown

Wire size: .207
Inside diameter: 2-5/8"
Length: 12 ft

.295_2"-RH

Torsion Spring .295 x 2" x 12ft RH Blue

Wire size: .295
Inside diameter: 2"
Length: 12 ft

.283_2"-RH

Torsion Spring .283 x 2" x 12ft RH White

Wire size: .283
Inside diameter: 2"
Length: 12 ft

.192_2"-RH

Torsion Spring .192 x 2" x 12ft RH Silver

Wire size: .192
Inside diameter: 2"
Length: 12 ft

.225_1-3/4"-RH

Torsion Spring .225 x 1-3/4" x 12ft RH Orange/Green

Wire size: .225
Inside diameter: 1-3/4"
Length: 12 ft

OPH-6112-ECB

Manaras Opera-H 1/2HP 120V 1Ph with Electronic Circuit Board

A heavy-duty industrial jackshaft operator.
For use on Standard High and Vertical Lift sectional doors.
Can also be used on Rolling doors or Grilles.
Comes with a self-engaging chain hoist for manual operation.
Clearence: side room required 15"
25 cycles per hour 100 cycles per day

.......more details

Installation Manual Sell Sheet

LIMIT006

Manaras Single Micro Limit Switch with Flat Lever

Fits old medium-duty Manaras operators such as MDJ
SPDT - Cherry

Limit Switch Chart

RADIO-KIT005

Manaras plug-in receiver for Board 60 or electromechanical operators 390 MHz *** To extent of inventory

Direct ECB plug-in receiver card kit (RADIO RE100B) for on-site installation.
Maximum 16 transmitters per receiver.

HAE00022

Linear Inner Slide Assembly - Belt (HBT)

15.1

Whiting Truck Door Stainless Steel Center Hinge

1014-1-5/8-8'

Rigid Vinyl Bottom Retainer Notched 8' Long

Black - for door thickness of 1-5/8"

1015-1-3/4-16'

Rigid Vinyl Bottom Retainer Raised Centre 16' Long

Black - for door thickness of 1-3/4"

1015-1-3/4-12'

Rigid Vinyl Bottom Retainer Raised Centre 12' Long

Black - for door thickness of 1-3/4"

1006-1-3/4-12'

Rigid Vinyl Bottom Retainer U-Shaped 12' Long

Black with flexible fin to touch door face.
For door thickness 1-3/4"

1003-1-5/8-24'

Aluminum Bottom Retainer L-Shaped

For 1-5/8" thick doors.
DIE # ES18010

1003-1-3/8-14'

Aluminum Bottom Retainer L-Shaped

For 1-3/8" thick doors.

1104-7FT-DK-BRN

Residential Side & Top PVC Weather-Strip with cap 7' Long - Commercial Brown (DN)

Commercial brown rigid vinyl retainer with commercial brown flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

1104-16FT-BROWN

Residential Side & Top PVC Weather-Strip with cap 16' Long - Brown (N)

Brown rigid vinyl retainer with brown flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

1104-14FT-BROWN

Residential Side & Top PVC Weather-Strip with cap 14' Long - Brown (N)

Brown rigid vinyl retainer with brown flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

1104-14FT-CREAM

Residential Side & Top PVC Weather-Strip with cap 14' Long - Cream (C)

Cream rigid vinyl retainer with cream flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.
Also known as Almond

7001-8-WHITE

Commercial Side & Top Weather-Strip 8' Long - White (W)

White galvanized steel with white dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.

1106-14-BLACK

Commercial Side & Top Weather-Strip 14' Long - Black

Aluminum retainer with black dual fin vinyl

1106-16-BLACK

Commercial Side & Top Weather-Strip 16' Long - Black

Aluminum retainer with black dual fin vinyl

1106-12-BLACK

Commercial Side & Top Weather-Strip 12' Long - Black

Aluminum retainer with black dual fin vinyl

1102-24-BLACK

Commercial Side & Top Weather-Strip 24' Long - Black

Aluminum retainer with black heavy-duty dual fin vinyl.

1102-10-BLACK

Commercial Side & Top Weather-Strip 10' Long - Black

Aluminum retainer with black heavy-duty dual fin vinyl.

1102-12-BLACK

Commercial Side & Top Weather-Strip 12' Long - Black

Aluminum retainer with black heavy-duty dual fin vinyl.

1102-16-BLACK

Commercial Side & Top Weather-Strip 16' Long - Black

Aluminum retainer with black heavy-duty dual fin vinyl.

1001-24-GREY

Commercial Side & Top Weather-Strip 24' Long - Grey

Aluminum retainer with grey dual-fin vinyl
Sold by full case quantity (10)

1001-16-GREY

Commercial Side & Top Weather-Strip 16' Long - Grey

Aluminum retainer with grey dual-fin vinyl
Sold by full case quantity (10)

32-48-220

Extension Spring 8' Door - 220 lbs Green ** Replaced by 27-48-220

Double - Loop
32" long 48" stretch 220 lb load
Springs sold individually

Spec Sheet

25-42-160

Extension Spring 7' Door - 160 lbs Brown

Double - Loop
25" long 42" stretch 160 lb load
Sold individually
Rated for 10000 cycles
Same as part number 116

Spec Sheet

25-42-50

Extension Spring 7' Door - 50 lbs Red

Double - Loop
25" long 42" stretch 50 lb load
Sold individually
Rated for 10000 cycles
Same as part number 105

Spec Sheet

27-20305

Truck Door Balancer Bracket Center for Whiting Roll-Up Doors

Steel construction
Plain finish
Cross Reference: W #2525

26-94521

Truck Door Intermediate Panel (11" x 98") for Whiting Dryfreight

These panels are cut to an extra wide width to fit wider vehicle applications.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
3/4" thick 7 ply exterior grade medium density plywood. Primer finish

26-14322

Truck Door Bottom Panel with Seal (12" x 98") for Todco DryFreight Doors

These panels are cut to an extra wide width to fit wider vehicle applications.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
3/4" thick 7 ply exterior grade medium density plywood Primer finish
Comes only with bottom retainer and seal (installed)

H11G12

Hinge #12 x 11 gauge

11 gauge # 12 hinge - 1.00 lbs
Bright zinc-plated steel construction
For use with 7/16" stem rollers

RN1327

Roller 2" Nylon 7" stem 13 ball White Sold per Roller

White Nylon Roller Wheel Diameter: 2"
Working Length: 6.62" Overall Length: 7.59"
Box qty: 100 Box weight: 44.8 lbs (2-7-13 White Nylon)

RS1039

Roller 3" Steel 9" stem 10 ball - To Extent of Inventory. Replaced by RS1039-C

Steel Roller Wheel diameter: 3"
Working length: 8.5"
Overall length: 9.64"
Box qty: 60 Box weight: 49.6 lbs (3-9-10 Steel)

HD3130

End Stile Latch 7-1/2" Lockbar Length

Lockbar Length: 7-1/2"
Throw: 2-1/8" Use with: Lockbar or End Stile
Centerline Distance (key spindle to handle shaft): 2-3/4".
Handle in Bright Chrome Finish Latch in Bright Zinc Plated steel.

6X16PO50

Devanco Loop 6' x 16' pave-over 50' lead-in

Ideal for use on with gravel driveways or sufaces that are to be asphalted
Features a twisted lead-in to reduce the chances of interference and false detections.
Direct burial loops should be buried approximately 6" deep

Installation Instructions Instructions d'installation Spec Sheet Brochure Loop Placement Guide Guide de positionnement des boucles

8FT-CHAIN-LINEAR

Linear 8ft Chain Rail for residential openers (HCT8C)

8ft chain-drive T-rail for LDO33 LDO50 LSO50 LCO75 & LDCO800 door operators
Fully-assembled & pre-tensioned
Compatible with Model CHCR-7/8 & CHCR-8 carriage house I-rail conversion kits

65-32449

LiftMaster Thermostat Control Heater 115V & 575V Fin Type ** Discontinued

Designed to automatically maintain a suitable temperature inside a control enclosure down to -40 degrees F.
Uses a high surface area aluminum heat emitter to eliminate the need for a fan
Provides low-radiation and high-convection heating in the enclosure
Adjustable from 30 degrees to 120 degrees F. (0 to 50 degrees C.) 208V - 460V
Compatible with operators SL575 SL585 and SL595

SNACPH39

LiftMaster HID 30-bit Proximity Card Facility Code 9 *Discontinued*

Same as SN000099-30-9
Compatible with KPR2000 reader
Replaced by LMPC2-SN (need to know facility code)

18004B

Genie Motor Start Capacitor 220VAC 50-60 MFD

Compatible with most 1/3 HP Genie & Overhead operators

MOUNTSHAFT018F

Manaras Limit Shaft Kit for MTH MTBH MJH MSJ

Limit Shaft Kit for OLD STYLE MTBH/MJH/MSJ Operators
5/8 - 24 10" limit shaft
For MSJ built before 2012 (green control box)

Drawing

MD00382

Micanan Roller Chain #41 49 Pitch Drive with Link

For PRO T/TB

TC134-9

Top Cap 1-3/4" 9 ft Black Box Qty Only ** To extent of Inventory

Sold in box quantities only
12 pieces per box

6X15SC50

Devanco Loop 6' x 15' saw-cut 50' lead-in

Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
Ideal for use on existing asphalt or concrete surfaces
Features a non spliced continuous wire throughout loop turns and lead-in.
requires the use of loop sealer when being installed to ensure long lasting trouble-free detection

Installation Instructions Instructions d'installation Loop Placement Guide Guide de positionnement des boucles

.468_3-3/4"-RH

Torsion Spring .468 x 3-3/4" x 12ft RH Blue/Orange **NLA

Wire size: .468
Inside diameter: 3-3/4"
Length: 12 ft

7144.96

Whiting Bottom Aluminum U-Channel For Coldsaver 96" long

Bottom seal sold separately

OHJ-6432-ECB

Manaras Heavy-Duty Jackshaft Operator 1/2 HP 480V 3 Ph with Elect. Circuit Board

25 cycles per hour 100 cycles per day
An Industrial duty operator featuring both the patented Hoist-a-Matic a self-engaging chain hoist for manual operation as well as a floor level disconnect
Specifically designed to motorize grills when a manual egress is required
Mechanical brake
Hoist on right standard
Full overload protection

.......more details

Installation Manual Sell Sheet

LPWKP-G

Linear MegaCode Wireless Keypad 318 MHz Cool Grey **** Replaced by NMTK

Activates multiple MegaCode receivers
User selects 1 to 6 digit PIN number or 1 to 6 letter PIN name
Programming is easy via the keypad; MegaCode receiver auto-learns PIN
Backlit keys for easy viewing
Wall mounting hardware (2 screws and anchors) supplied
Power: Three AAA batteries

.......more details

PRO-GT-10011-U

Micanan 1HP 115V 1P Worm Gear Trolley Operator N1 Eyes Monitored ECB

C-600-INSTALLED

Cones 6" Factory Installed (Pair)

For do-it-yourself installation use part no. SF600

LVB1024-11

Laminated Bumper Black 10" Projection Vertical Installation 24" x 11" Sold Individually

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 1” diameter.

.......more details

K001A6424-1

LiftMaster Circuit Board Assembly Kit 2010 390 MHz

Installation Manual

GALV-234-2-LH

Cut-to-Length Torsion Spring .234 x 2" Left Hand Wound Galvanized Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

MK-00140

Micanan Reversing Relay 24VDC Coil DPDT (Flange Mount)

8-pin

ZAP-800-3-PB

Zap Control Box Assembly for ZAP800

PRO-GT-7553-U

Micanan 3/4HP 575V 3P Worm Gear Trolley Operator N1 Eyes Monitored ECB

K79-13493-2

LiftMaster Logic Board Replacement Kit FDCL

Replacement board for fire door model FDCL

.207-134-L-C

Cut-to-Length Torsion Spring .207 x 1-3/4" Left Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-134-INSTALLED

K94-36411

LiftMaster Piezo Alarm

For LA400DC

K002B0821-1

LiftMaster Transformer for EL1SS and EL25

120 volt input power plugs into a standard outlet
16VDC output 2.5 amps

1019-1-3/8-16'

Rigid Vinyl Bottom Retainer Flat 16' Long

Black - for door thickness of 1-3/8"

.207_2"-RH

Torsion Spring .207 x 2" x 12ft RH Brown

Wire size: .207
Inside diameter: 2"
Length: 12 ft

5001-14-WHITE

Residential Side & Top Weather-Strip 14' Long - White

Painted aluminum retainer with flexible dual fin vinyl.
Residential use.

PRO-LT-5011-U

Micanan 1/2HP 115V 1P Commercial Trolley Operator N1 Eyes Monitored ECB

Designed for use on commercial doors with standard lift tracks that require no more than 15 cycles per hour
Trolley track for door up to 12ft standard upcharge for 14' & 16'
Door speed 9 inches per second
UL325
On-Board receiver holds up to 20 transmitters

.273-3-3/4-LH-C

Torsion Spring .273 x 3-3/4" x 144" LH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .273 ID: 3-3/4" Length: 12 ft

27-48-110

Extension Spring 8' Door - 110 lbs White

Single - Loop
27" long 48" stretch 110 lb load
Sold individually
Rated for 10000 cycles

Spec Sheet

1801.77

Whiting Aluminum U-Channel 96" *** Price by Quote

Special order item. Price by quote only
For bottom seal use item 1676.96

K07-8003

LiftMaster lower Crank Link BG770/790 Barrier Gate

For use with BG770/790 barrier gate operator

2807.182*290

Whiting Spring Assby .182 x 2-3/16 x 29" Curbside

Replacement torsion spring with cones
Specs: .182 x 2-3/16" x 29" Long
Roadside
For Roadside order part # 2807.182*290

SM102

Miller Edge Signature Module w/Junction Box for 10K (T2) Sensing Edges

SM-102: Converts a 10K resistive signal
Module: 1.8”H x 1.25”W x 0.8”D (46 x 32 x 20 mm)
Junction box: 1.5”H x 4”W x 2”D (38 x 102 x 51 mm)
Module: ABS plastic with epoxy
Junction box: Galvanized steel
Module: NEMA 4

.......more details

PRO-HBH-10083U-R

Micanan 1 HP 208V 3P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Right Hand

1 HP208V 3 PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
N-1 Through-beam (MK-00649) photocells included. Other options available.
3-btn o/s/c (02-103) wall control station included
Adjustable Friction Clutch 5L320 drive belt
#50 Roller chain 18 tooth door sprocket included

.......more details

40629A.S

Genie Wire Harness for Door Lock

Includes 1 wiring harness only
Connects to the door lock for Genie Wall Mount garage door openers Overall length 10'
Compatible with models 6070H 6070H-B 6072H-BO 6072H-O 6170H 6170H-B 6172H-BO 6172H-BSV 6172H-BV 6172H-O

K15-50B18QGX

Output Sprocket for SL595 and SL595UL

��This is a replacement Output Sprocket. Compatible with LiftMaster® Model SL595U Slide Gate Operators. Check the manual or replacement parts diagram for specific part information before ordering to ensure compatibility.