Devanco Canada - Get The Right Garage Door Opener‎ and Parts

086565.1013.S

Overhead Door Chain RLR #25 x 62P Loop

HAE00087

Linear Safety Beam Sender & Receiver with Wire

Set includes: Sender and Receiver photocells wire and connectors
Safety beams will work with all Linear operators that currently have safety beams installed.
Replaced HAE00002

10TD900HH3

BEA 3-Button Transmitter 900 MHz

Compact transmitter allowing wireless activation of any door control providing greater line-of-sight distance than legacy wireless frequencies.
It also provides better penetration of obstacles.
Operating temperature: -10 to 55C
IP65

GAREX-PAINT-IRN-ORE

Garex Touch-Up Paint Iron Ore

10-BR2900

BEA 2 Relay Logic Module + 900MHZ Wireless Technology

2 relay logic module ideal for applications requiring sequencing of electric locking devices and automatic door activation.
Day/Night mode allows users to designate "secure" or "unsecure" access for controlled entry points.
Push plates with wireless transmitters can be programmed to operate during specific time periods.
Programmable transmitters per receiver: 75 (unlimited for universal timer)
Input: DRY contact
Temperature rating: -22 to 158F

.......more details

OSH-6234-M-N1-RH

Manaras Opera-SH 1 HP 208V 3 Ph Monitored Board w/N1 Eyes RH

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
25 cycles per day > 100 cycles per day

.......more details

Installation Manual

SPR50B54X1

Sprocket 50B54 for a 1" Shaft

GALV-393-6-R

Cut-to-Length Torsion Spring .393 x 6" Right Hand Wound Galvanized Orange Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-600-INSTALLED
Galvanized

GALV-319-334-R

Cut-to-Length Torsion Spring .319 x 3-3/4" Right Hand Wound Galvanized Blue/Green

Priced per inch - cones sold seperately
For factory installed cones use part no. C-334-INSTALLED
Galvanized

GALV-319-334-L

Cut-to-Length Torsion Spring .319 x 3-3/4" Left Hand Wound Galvanized Blue/Green

Priced per inch - cones sold seperately
For factory installed cones use part no. C-334-INSTALLED
Galvanized

GALV-319-258-R

Cut-to-Length Torsion Spring .319 x 2-5/8" Right Hand Wound Galvanized Blue/Green

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED
Galvanized

GALV-306-334-R

Cut-to-Length Torsion Spring .306 x 3-3/4" Right Hand Wound Galvanized Red Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-334-INSTALLED

GALV-283-258-R

Cut-to-Length Torsion Spring .283 x 2-5/8" Right Hand Wound Galvanized White Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

GALV-283-258-L

Cut-to-Length Torsion Spring .283 x 2-5/8" Left Hand Wound Galvanized White Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

LA400XL20W

LiftMaster Single Arm Solar Package for LA400 Gate Operator UL325 (Include (2x) SP10W12V Solar Panels (1x) XLSOLARCONTUL Control Box (1x) K94-37236 Solar Harness (1x) LMRRUL Photoeye (1x) K10-36183 Battery Tray (2x) A12330SGLPK Batt. (1x) LA400DC)

Kit Includes: LA400DC arm XL Solar control box (XLSOLARCONTU) which includes two 10WATT 12V Solar panels compatible with LA400 LA412 and LA500 Universal Solar harness (K94-37236) Monitored Retro Reflective Photos Eyes (LMRRU) Battery Tray (K10-36183) and two batteies (A12330SGLPK)
For dual gates order extra LA400DCS secondary arm
Updated unit complies with new UL325 code revised Jan 2016

99119671-PER-FOOT

Amarr Bottom U-Seal 3.5" Black Double Dovetail Vinyl 1/4" T Sold per Foot

1/4" T width
Used on Amarr Residential Open Back Doors and Classica models

GALV-243-334-R

Cut-to-Length Torsion Spring .243 x 3-3/4" Right Hand Wound Galvanized Price per Inch

Priced per inch
For factory installed cones priced seperately - use part no. C-334-INSTALLED

GALV-250-334-L

Cut-to-Length Torsion Spring .250 x 3-3/4" Left Hand Wound Galvanized Price per Inch

Priced per inch
For factory installed cones priced seperately - use part no. C-334-INSTALLED

10FALCON-EXXL100

BEA Falcon Motion Detector w/Exp Proof Housing 100ft Cable Mount 6.5' to 11.5'

FALCON EX combines a microwave activation sensor with an explosion-proof / flame-proof housing
Ideal for use in unique environments such as chemical manufacturing petroleum refining and agriculture.
FALCON EX can be mounted from 6.5' to 11.5' to fit any industrial application.
Nema4/IP66
Detection Zone: Falcon EX XL: 13’ × 6 ½’ @ 8 1⁄5’
Oerating termperature: -22-140F

.......more details

MWT12B

Miller Edge Transmitter Binary Nema 4 Enclosure

The MWT12 safety edge transmitter is designed to provide wireless signal transmission form the safety edge to the motor controls.
It is easily mounted and wired to the gate or door edge sensor. When the sensing edge comes into contact with an obstruction a closed circuit signal is created and is sent to the transmitter.
The transmitter relays the information to the receiver and the receiver passes the signal along to the operator motor.
The gate or door stops movement and will then reverse the direction of travel.
Comes standard with a NEMA 4 weather-proof enclosure. The enclosure can be easily mounted with the four mounting holes and screws provided
Response time: 70 milliseconds

.......more details

Installation Instructions MWT12B Spec Sheet MWT12B FAQ MWT12B

GALV-243-258-R

Cut-to-Length Torsion Spring .243 x 2-5/8" Right Hand Wound Galvanized Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

GALV-262-334-L

Cut-to-Length Torsion Spring .262 x 3-3/4" Left Hand Wound Galvanized Price per Inch

Priced per inch
For factory installed cones priced seperately - use part no. C-375-INSTALLED

GALV-234-258-L

Cut-to-Length Torsion Spring .234 x 2-5/8" Left Hand Wound Galvanized Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

10LZR-FLATSCAN-SWB

BEA LZRFLATSCAN Kit Black 2 Sensors + Cables & Accessories

Time-of-flight presence sensor for use as a stand alone safety sensor on automatic pedestrian swing doors.
Can be used as a reactivation sensor on the approach side of low energy doors.
Generates 170 detection points across a single curtain allowing for coverage over the entire face of a single door leaf including the hinge area.
Finger Detection Technology™ utilizes 100 detection points within the hinge area of the door protecting hands and fingers while the door is in motion.
Max. detection range: 13' with a reflectivity of 2%
IP54

.......more details

LZR-MICROSCAN1T

BEA LZR Microscan Kit 1 Door with 2 Microscans Hub & Cables

Laser-based sensor system for automatic swing doors.
Time-of-flight technology used to eliminate the limitations of infrared-based devices.
Background independence eliminates nuisance detections caused by changing conditions while gyroscopes sense the movement of the door for accurate positioning.
Provides asjustable pattern depth.
Min/max door width: 20"-48" from leading edge of sensor LED
Mounting height: 75"-98" from finished floor to sensor LED

.......more details

K41-0380-000

LiftMaster Bridge Rectifier 700/1200

For Maxum ops

K41-0410-000

LiftMaster 1200 Extended Duty Motor Gear Box Encoder Hoist

For Maxum Hoist 1200 Op

K41-0375-000

LiftMaster 24VDC Motor Gear Box Encoder (Jackshaft 1200)

Maxum J-1200

K41-0378-000

LiftMaster 24VDC Motor Gear Box Encoder (Trolley 1200)

Maxum T-1200

A22K

Erone Krypto 2-Door IP Controller

The ATRIUM A22K two door IP controller works perfectly with the most popular Wiegand card readers or with the embedded KRYPTO high-security solution providing the best of both worlds in access control.
KRYPTO is the easiest solution to manage DESFire® EV2/EV3 smart credentials on the market making worries of card cloning a thing of the past.
The auto restore of encryption keys upon power failure ensures an effortless system start up and management.
Additionally the A22K can easily be converted to an Elevator Controller (A22KEC) Schlage Door Handle Controller (ADH2K) or Aperio Door Handle Controller (A2PK) as needed.
Controls 2 doors / 4 readers (entry/exit per reader port)
Add more A22Ks to expand your system up to 500 doors

.......more details

Wireless System Chart

8086.207.320

Whiting .207 x 2-5/8 IN x 32" Roadside with Cones

An original Whiting assembly

GALV-406-6-R

Cut-to-Length Torsion Spring .406 x 6" Right Hand Wound Galvanized Blue/Yellow Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-600-INSTALLED
Galvanized

8087.207.320

Whiting .207 x 2-5/8 IN x 32" Curbside with Cones

An original Whiting assembly

GALV-406-6-L

Cut-to-Length Torsion Spring .406 x 6" Left Hand Wound Galvanized Blue/Yellow Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-600-INSTALLED
Galvanized

LJH-353-1/2

Doorlec 1/2 HP 575V 3PH Jackshaft Operator

Heavy duty industrial type control station open close stop 24V. control circuit
Universal mounting right or left
Floor level disconnect device electrical and mechanical
Emergency chain hoist operation on LJH model only
Colour code wiring diagrams
Rotary type limit switches readily adjustable in both directions

.......more details

E/1907/012

BLG76 Backup Spring Assembly

SPBCU1

NICE MBAR/LBAR R10 Logic Control Board

22019

Doorlec Push Button Contact Block N/O

BEA-10ULTIMO

BEA Automatic Sliding Door Sensor

Dual technology sensor for sliding doors: the microwave motion field activates as people/objects approach as the infrared curtains ensure the safety of pedestrians passing through the door opening.
Provides uniform sensitivity across the curtain.
Ideal for high-traffice environments such as hospitals hotels airports or retail facilities.
Mounting height: 6'6 to 11'6 •Operating temperature: -13 to 131F
IP54

Installation Manual Manuel d-Installation Sell Sheet

44-60-160

Extension Spring 10' Door - 160 lbs

Clipped ends
44" long 60" stretch 160 lb load

K41-0241-000

LiftMaster Transformer for IHSL24UL

Compatible with LiftMaster® IHSL24UL Series Industrial Heavy Duty Slide Gate Operators

CA-129-512

Continuous Angle 1-1/2" x 5-1/2" x 129" L Sold as a PAIR

2237.1

Whiting Coldsaver Intermediate Panel 13-1/2" x 93-3/4" *** Price by Quote Only

Fits Coldsaver Roll-Up Doors
1-1/8" thick 96" wide

E/1929/201

Automatic Systems Limit Switch Assembly

Used on the BL229 gate op.

OSH-6114-M-N1-RH

Manaras Opera-SH 1 HP 120V 1 Ph Monitored w/N1 Eyes Right Hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
25 cycles per day > 100 cycles per day

.......more details

Installation Manual

10TD900TR

Transmitter 900mhz Touchless Wireless Converter

Allows wireless door activation without the need to run additional wires to easily change existing door configurations from hardwired push plates to touchless door actuators.
Microwave doppler technology allows for consistent and reliable detection.
For automatic door apllications.
Compatible with 10RD900 and 10BR2900 receivers.
IP65
Nema 4

.......more details

E14500D

Cable Tie KSPEC STD 50 LB Black 14" Nylon 500/pkg

Length: 15" Width: 5.0MM (0.187")
Low insertion and pull through force
Advanced pawl and teeth design
Angled tail provides quicker initial insertion alignment
Tail finger grips allow easier handling and tightening
Rounded edges provide added safety and eliminate insulation damage

.......more details

E14400M

Cable Tie KSPEC 40 LB Black 14" Nylon 1000/pkg

Length: 14" Width: 3.6MM (0.140")
Low insertion and pull through force
Advanced pawl and teeth design
Angled tail provides quicker initial insertion alignment
Tail finger grips allow easier handling and tightening
Rounded edges provide added safety and eliminate insulation damage

.......more details

TDC12X1BMC

LiftMaster MAXUM Trolley DC Comm. Op 3/4HP Equivalent 120/240V 1PH 60 Cycles/Hr 1200LB

Smooth Start/Stop Operation - DC high-efficiency motor and gearbox provides the power needed and smooth start and stop to reduce wear-and-tear on your door and operator.
Faster Speed - Average of 12” per second opening on sectional doors.
Battery Backup Option - (battery backup kit sold separately).
Floor-Level Wall Controller - 4-line LCD display gives you access to programming troubleshooting and diagnostics at floor level saving time and money.
Wi-Fi® and myQ® - Easily connect to myQ Facility via Wi-Fi for visibility into what is happening at your door and control it from your web browser; no need for additional hubs or accessories. Know what accessories activate the door (remote transmitter keypad etc.)
Drive Type 65:1 Gearbox with #50 Chain Output

.......more details

TDC_Installation-manual TDC_Manuel-installation Data sheet Fiche technique Quick connect guide Guide de connexion rapide Ordering guide

2200-983-UPS

Linear Brake and Puck Assembly UPS HSLG

MD-00033

Roller Chain #60 10' per Pack

837LM

LiftMaster MyQ Smart LED Garage Light Sec+ 2.0

1000 Lumens of LED illumination provide a bright maintenance-free glow.
Unique compact design allows for placement where you need it.
Easy to Install. Conveniently plugs into a standard outlet and mounts on the wall or ceiling.
Control and schedule your LED light from anywhere with the myQ app. Requires a LiftMaster® or Chamberlain® garage door opener with myQ technology Smart Garage® Control or myQ Internet Gateway.
Acts as a garage door opener light (works with Alert-to-Close and Motion Control) when paired to your garage door opener.
Turn lights on and off with the myQ App or your garage remote.

.......more details

837LM Manual (EN/FR)

MA035RDOT

LiftMaster 9ft Square PVC Barrier Arm Only (Articulating Hardware NOT included)

9' Square Arm
PVC
Red & White Retro-Reflectorized DOT Tape
Hardware NOT included

OPH-6212-M-N1-RH

Manaras Opera-H 1/2HP 240V 1Ph with Monitored Board and N1 Photoeyes

A heavy-duty industrial jackshaft operator.
For use on Standard High and Vertical Lift sectional doors.
Can also be used on Rolling doors or Grilles.
Comes with a self-engaging chain hoist for manual operation.
Clearence: side room required 15"
25 cycles per hour 100 cycles per day

.......more details

OPH-6214-M-N1-RH

Manaras Opera-H 1 HP 240V 1Ph with Monitored Board and N1 Photoeyes

A heavy-duty industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a self-engaging chain hoist for manual operation
Clearence: side room required 15"

50111

LiftMaster Center Support Bracket ATS211X-14 Sold per Unit

For 14 Feet ATS211X CD1014 Rail

DW-HOSE-CONN

Copper Air Hose Connector 3 x 22mm with Collar *** To Extent of Inventory

For use in DW-3S and DW-TR air switches

GALV-295-258-L

Cut-to-Length Torsion Spring .295 x 2-5/8" Left Hand Wound Galvanized Blue Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

SB258100-PAIR

Garex End Bearing Plate Reinforced 2-5/8" - 1" Residential Sold as a Pair

GH4416-40

Green Hinge 4-Panel Residential System Set

The Green Hinge System provides a close tight seal of your door to your building eliminating gaps and saving energy and money!
Patented spring-loaded garage door hinge system that allows automatic adjustment of the overhead garage door closing up to 1/4in side gap
Reduces dirt dust bugs rain & moisture
Quick and Simple installation
Fits Residential & Commercial Doors
100% Made & Assembled in the USA

.......more details

S50E

LiftMaster Small Profile Ends Kit 10 Sets of 2

Fast easy to install and cost effective system no glue is required
One end for output wire other end with resistor for monitoring
Compatible with S50 Small Profile Edge
Includes: (10) sets of 2

GALV-295-6-144-L

Torsion Spring .295 x 6" x 12ft LH Galvanized Blue

Wire size: .295
Inside diameter: 6"
Length: 12 ft
Galvanized Stenciled

GALV-283-2-144-L

Torsion Spring .283 x 2" x 12ft LH Galvanized White

Wire size: .283
Inside diameter: 2"
Length: 12 ft
Galvanized Stenciled

GALV-273-334-144-R

Torsion Spring .273 x 3-3/4" x 12ft RH Galvanized Orange/Red

Wire size: .273
Inside diameter: 3-3/4"
Length: 12 ft
Galvanized Stenciled

GALV-273-2-144-R

Torsion Spring .273 x 2" x 12ft RH Galvanized Orange/Red

Wire size: .273
Inside diameter: 2"
Length: 12 ft
Galvanized Stenciled

GALV-250-258-144-R

Torsion Spring .250 x 2-5/8" x 12ft RH Galvanized Green

Wire size: .250
Inside diameter: 2-5/8"
Length: 12 ft
Galvanized Stenciled

GALV-250-2-144-R

Torsion Spring .250 x 2" x 12ft RH Galvanized Green

Wire size: .250
Inside diameter: 2"
Length: 12 ft
Galvanized Stenciled

GALV-243-258-144-R

Torsion Spring .243 x 2-5/8" x 12ft RH Galvanized White/Yellow

Wire size: .243
Inside diameter: 2-5/8"
Length: 12 ft
Galvanized Stenciled

GALV-243-258-144-L

Torsion Spring .243 x 2-5/8" x 12ft LH Galvanized White/Yellow

Wire size: .243
Inside diameter: 2-5/8"
Length: 12 ft
Galvanized Stenciled

GALV-234-258-144-L

Galvanized Torsion Spring .234 x 2-5/8" x 12ft LH Blue/White

Wire size: .234
Inside diameter: 2-5/8"
Length: 12 ft

11.7135

Whiting Horizontal Track 2" x 135" L 6" Radius Roadside 1 Piece

1 roadside horizontal track

K75-17034

LiftMaster Heavy-Duty Straight Door Arm Assbly

For use with various LiftMaster® Logic 4.0/5.0 and DC MAXUM Industrial-Duty and Extended Duty Jackshaft Hoist Commercial Door Operators

XF208VAC7

LiftMaster 208V Transformer Kit 700

Q520

LiftMaster Wiring Harness Kit CSW Motor K94-50286

Compatible with LiftMaster® Model CSW200UL Swing Gate Operators

Q123

LiftMaster Electric Motor 12VDC K20-9012B-1

For use with various LiftMaster® Slide and Swing Gate Commercial Door Operators

BEA-10LIGHTBKT-TL

BEA Modular LED Signal Light Bracket

Bracket only for modular LED lights.

BEA-10LIGHT-TBASE

BEA Modular LED Signal Base

To be used with the BEA-10LIGHT modules.

User Guide Datasheet

41184R

Genie Transformer

Works with Overhead Door Infinity 2000 9020 & 9120
Works with Genie 6070H 6070H-B 6170H 6170H-B 6172H 6172H-B 6072
Same as: 41184 41184R 41184R.S

V3564-PER-FOOT

Vinyl Seal 4" Bottom Bead End Grey Sold per Foot

Bead diameter 3/16" - 7/32" +/- tolerance

EXT-HDWR-BOX-7/8

Installation Box for Extension Springs for 7' & 8' Doors

Installation Hardware includes 3" sheaves sheave strap cables safety cable fasteners

2100-1738

Linear Drive Shaft 1" Slide Gate HSLG

GHW-311-1.5HP-RH

Doorlec Ind. Duty Jackshaft Carwash Op. 1-1/2 HP 115V 1P with ECB

With DC2000 logic board
Worm-Gear Jackshaft type Industrial operator NEMA 4/12

2100-669-UPS

Linear Hub Clutch Cast Ir Pinned UPS HSLG

200R

Chain Hoist Wall Mount 3:1 200R-41B36-1" Torque Force (244687)

Ratio 3:1
Sprocket: 41B36 Bore: 1"
Includes: 26ft of hand chain 1/4" square key chain keeper and 3.6ft of #41 roller chain included with sprocket wheels.
Pull load hand chain: 35 lb max

70225.000

Truck Door Todco 2" White Nylon Quiet Roller ** Price by Quote Only

GH-353-3

Doorlec Industrial Gearhead Door Operator 3HP 575V 3-Phase

Extra Deavy-Duty Gearhead Industrial Operator or large Sectional or Rolling Steel Doors
DC-2000 Logic Board with adjustable Timer To Close Delay On Reverse and Traffic Light Control
Worm gear reducer 40:1 ratio for high-torque and long life
Solenoid Disk Brake Prevents coasting and secures the door when closed
TEFC (sealed) continuous-duty electric motor with overload protection
Optional Friction Clutch available

.......more details

26141

Doorlec Cam Shaft 9-1/4" x 5/8" (24 x 1.59cm)

Fits the older smaller boxes

K093A0763

LiftMaster Rear Housing KPW5 KPW250

This is a replacement Rear Housing KPW5 KPW250.
For use with various LiftMaster® Wireless Keypad Entry Systems

CHAIN061

Manaras #410 - 1R26P (Incl. 1 C/L) 13" Long

Q277

LiftMaster Wiring Harness Kit DC2000 K94-50262****no longer available

Compatible with LiftMaster® Models SL3000 and CSW200 Perimeter Access Systems

41DJ003MC

LiftMaster Receiver Logic Board DC WiFi RJO

Security+ 2.0 Receiver Logic Board Replacement Kit
For use with various LiftMaster® and Chamberlain® DC Wi-Fi® Wall Mount Residential Jackshaft Garage Door Operators; powered by myQ® and manufactured 2023 to present
The unit will feature a yellow circle learn button