Devanco Canada - Get The Right Garage Door Opener‎ and Parts

1005-2-10'

Aluminum Bottom Retainer U-Shaped 10' Long**Actual Length 10'1"***

For door thickness 2"

MI00002

Micanan Pulley 8" OD c/w Bushing 3/4" ID

33950R

Genie Up Limit Switch Assembly 66 " Wire

For use on 7'6" rail assemblies.
For Genie Excelerator models and Overhead Overdrive models
Open / Up magnetic limit switch

780

Fasteners Hex Head Bolt 3/8-16 x 1-1/2" 500/Box

3/8" bolt has 9/16" head
Max torque = 22
Full thread
Grade 5

18007

Doorlec Reducer BHC-63 5/8' or 7/8" Input

Gearbox for GH operator

19-5114

LiftMaster Trolley Chain Pack #41 for 14ft Door

For 3/4 & 1 HP trolley operators

MD00086

Micanan Sprocket 40B18 x 1" 1/4" Keyway

CARSENSE-101

EMX Buried Driveway Alert Sensor XC101-LV Probe Sold Separately (CS101)

The CarSense 101 provides a solution for many vehicle detection challenges. Where safety is an issue the CarSense 101 detects moving vehicles in blind areas along a driving path and actuates warning lights.
For access control applications requiring free exit the CarSense 101 detects vehicles and actuates gates overhead doors and other parking barriers.
Controls and indicators are mounted on front panel
Available in 9 - 41 VDC 6 - 29 VAC.
Low 2.5 mA standby current consumption makes it an excellent choice for solar power applications.
Housed in a small relay-type housing

.......more details

Installation Manual Sell Sheet

MV-00297

Micanan Commercial Wireless Keyless Entry 372 MHz

Will work on Micanan commercial operators that have an on-board receiver
If there is no receiver then MK-00648 is required
Same as MV-00086

Programming instructions Instructions de programmation

49477

Stanley Secure Code 3-Button Mini Transmitter 310 MHz

Open/Close mini remote for 3 doors
Does not work with digital style radios
Works with openers with Radio Learn button

Programming Instructions Instructions de programmation

7001-16-BLACK

Commercial Side & Top Weather-Strip 16' Long - Black (Code B)

Black galvanized steel with black dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.

EBOX-HHD-7511-R

Complete Control Box for PRO-HHD-7511 with Mechanical Contactor and Timer to Close

37028C.S

Genie Control Board for Model 2022 ** Repl. by 39537R.S (no cover)

For ReliaG 800 model 2022 gaarage door opener ◾ Genie 37028A Control Board for Genie Models 2022 2024 and 2042 Chain / Belt Drive Openers ◾ Works for the following models only: ◾ ReliaG 800 (2024) PRO Series 1 Piece Rail ◾ QuietLift 800 (2042) ◾ ChainLift 800 (2022)

SSZP17-1

Solid Shaft 1" Keyed Zinc Plated 17'-1" ** to extent of inventory

MT22-YELLOW-RH

Miller Edge 2-Wire Pressure Sensitive Edge Sold per Foot

��Electromechanical small profile edge for rolling steel foor applicaton. •Touch sensitive signaling allows for immediate stopping or reversing of motion. •The MT22 is completely flexible and will contour to curved surfaces. The MT22 also acts as weatherstrip. •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •2 wire NO configuration •Horizontal mount •ANSI/UL325 recognized component •One year warranty

Installation Manual Worksheet Sell Sheet

MT22-BLACK-RH

Miller Edge 2-Wire Pressure Sensitive Edge Sold per Foot

��Electromechanical small profile edge for rolling steel foor applicaton. •Touch sensitive signaling allows for immediate stopping or reversing of motion. •The MT22 is completely flexible and will contour to curved surfaces. The MT22 also acts as weatherstrip. •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •2 wire NO configuration •Horizontal mount •ANSI/UL325 recognized component •One year warranty

Installation Manual Worksheet Sell Sheet

MT22-YELLOW-LH

Miller Edge 2-Wire Pressure Sensitive Edge Sold per Foot

��Electromechanical small profile edge for rolling steel foor applicaton. •Touch sensitive signaling allows for immediate stopping or reversing of motion. •The MT22 is completely flexible and will contour to curved surfaces. The MT22 also acts as weatherstrip. •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •2 wire NO configuration •Horizontal mount •ANSI/UL325 recognized component •One year warranty

Installation Manual Worksheet Sell Sheet

T501L5

LiftMaster 1/2HP 115/230 Volt 1Ph Commercial Trolley Operator

New Logic 5
Suspended from the ceiling the operators are used on sectional overhead doors with standard lift.
T operators are directly attached to drive and control the door.
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
MyQ Mobile App is a free download with no annual activation fee.

.......more details

Installation Manual Manuel d'Installation Sell sheet Brochure

K72-10047

LiftMaster Limit Shaft Kit T APT SD & GH 1/2 HP - 2 HP models L5

For models T APT SD & GH 1/2 HP - 2 HP models L5

CH751L5-RH

LiftMaster Hoist Op. with Carwash Mod. 3/4 HP 115/230 VAC Logic 5 Right Hand

Industrial Duty Hoist Operator with Damp Environment modification.
Comes with either CPS-UN4 or CPS-RPEN4 photoeyes

Installation Manual Manuel d'Installation Sell sheet Brochure

RS1039-C

Roller 3" Steel 9" stem 10 ball Torque Force

Steel Roller Wheel diameter: 3"
Working length: 8.5"
Overall length: 9.64"
Box qty: 75

H501L5-LH

LiftMaster Ind. Duty Hoist Op. 1/2 HP 115/230 VAC Logic 5 Left Hand *** No Longer Available

Includes CPS-U
H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door. Connectivity
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.

.......more details

Installation Manual Manuel d'Installation Sell sheet Brochure

11-19471

LiftMaster Clutch Shaft

Fits model H operator with Logic 5

5463.96

Whiting Vinyl Top Seal 96" 1-1/2" wide

Original TempGuard top seal used on Supreme body trucks from 2009
One piece rigid plastic cap retainer with a flexible vinyl seal.

71B240G

LiftMaster Brake Kit 230/240V with Solenoid Field Install SL585 and SL595

Instruction Manual

75-10170

LiftMaster Trolley-Slider Assembly (08-10169)

For LiftMaster trolley models MT T GT
Also known as: 307085008 75-10170 08-10169 085008 7510170

109837

FAAC Gearmotor for Sliding Gates Model 844 230V 1p

Gearmotor for sliding gates with max. weight of 1800 kg 844 ER Z16 for rack applications
Ideal for commercial and industrial applications
Anti-crushing safety
As the gearmotor is non reversing no electric locks need be installed
In the event of power failure the key-operated release device makes it possible to open and close the gate manually
Twin-disk clutch in oil-bath

.......more details

HOMELINK-REPTR

LiftMaster HomeLink Repeater Kit ** same as 855LM

All 2006 or older vehicles require a repeater kit installation
In 2007 and newer if the HomeLink does not program with opener install a repeater
The remote supplied in the repeater kit must be kept for future programming and is NOT to be used as a garage door opener remote

Programming Instructions

1104-10FT-GREY

Residential Side & Top PVC Weather-Strip with cap 10' Long - Grey (G)

Grey rigid vinyl retainer with grey flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

LA500-SLR-PKG

LiftMaster Solar Package for LA500 Gate Operator

Solar package includes: 2 - 33AH batteries 2 - solar panels (SOLPNL20W12V) battery harness (LA500SLRHARN) and the battery tray (K10-36183).
Must be used with the LA500-1PKG-XLM
Solar option NOT compatible with LiftMaster Internet Gateway
Solar option not recommended in certain areas - please call before ordering

Installation manual Manuel d'installation Sell sheet Brochure

466LMC

LiftMaster Wireless Commercial Keypad 390 MHz ** Discontinued

Up to 100 000 individual codes
Mounts to wall or gooseneck post
Incl. 6-volt alkaline battery
Illuminated stainless steel faceplate and keypad
Tamper-resistant case and "low battery" indicator
Requires 412HMC receiver

.......more details

Installation Manual Sell Sheet

G90-503000

LiftMaster Non-Resettable Counter 24VAC (50-12862)

Increases one number each time current is applied
Connects to the 24 volts of contactor coil
Simple 2-wire connection
Same as 50-12862

K75-10177

LiftMaster Brake Hub Assembly

Assembly includes: Brake hub set screw push-on fastener and feather key

SG10-24RG-LED

TriLite Stop & Go Traffic Signal 24V LED Yellow Housing

Red and Green LED traffic light
Approx. size: 11-1/2" High x 6-1/2" Wide x 4" Deep
24 volt DC input voltage only
Long lasting low power consumption
A simple reliable and cost-effective way to reduce accidents around the loading dock.
Available in two colors: safety yellow or black.

.......more details

Installation Instructions Instructions d'installation Wiring Diagram Schéma de connexion

49563

Stanley Chain Drive Traveler Assembly

Compatible with all Stanley chain drive units from 1982-present
Not compatible with C-Channel models
Assembly includes Traveler 49564 and slider 24851

1010-PER-FOOT

Replacement Sweep for One-Piece Door Grey Vinyl

Fits into the bottom of one-piece 'Stanley' doors.
Sold per foot
2" wide

ARK

LiftMaster Auto Reconnect Trolley Kit

Installation Manual

M8-705

Marantec Photoeyes 69190 / 97246

Works on all Marantec units
Includes brackets hardware and wiring
Same as item #86850 97246 used to be M4-705
Made in Germany

Installation instructions

MT5011U

LiftMaster 1/2 HP 120 Volt Medium Duty Trolley Operator

1/2 HP 120 volt 1 phase medium-duty logic trolley operator
Medium-duty logic board with integral 315 MHz radio receiver
CPSU commercial photoeyes included
4L V-Belt #48 drive chain adjustable friction clutch
Use on standard lift sectional doors up to 14' high and up to 12 cycles per hour
2 year warranty

.......more details

Installation manual Manuel d'installation Product guide Guide de produit

736

Fasteners Round Head Carriage Bolt 5/16-18 x 3/4" Gr 2 1000/Box

Full length thread
Max torque = 12

59LMC

LiftMaster Outside Keyswitch ** To Extent of Inventory

12 tumblers provide double locking action
Self cleaning barrel weather-resistant aluminum plate
Cannot be shorted out from exterior with key
One "NO" contact used to activate the door operator
Includes two keys

Installation Manual

MWRTA12B

Miller Edge Wireless Transmitter with Audible Alarm and 1 Channel Receiver

For 2-wire edges
Was previously MWRTA02A now has a new board making installation easier
Includes single channel receiver (MWR12A) and transmitter (MWTA12) with audible low battery alarm.
This feature that activates when the battery has only 25% of its life remaining indicating the battery should be replaced. The alarm sounds for 5 to 10 seconds at 1 to 2 minute intervals.
The receiver operates on either 12 or 24 volt AC/DC and provides N.O. or N.C. output.

BK010

Commercial Top Bracket Adjustable 1-Bolt Sold per Piece

Zinc plated
12 gauge roller carrier and base plate
Adjustment of 7/16" minimum to 3-1/2" maximum
Good for use with 3" hardware

Z9003-MAX

Pusher Spring - 27" with 3" diameter Tip Sold as a Pair

Pusher spring 27" long with a large 3" tip. Sold as a pair
11lbs of initial pushing strength per spring+ 3lbs per inch per spring

02-406

LiftMaster Push Button Station Nema 4 O/C/S with Keyed Lock-Out Die-Cast Enclosure

Code on key is #301

MGR-2

Linear 2-Channel MegaCode Gate Receiver 318 MHz *** To Extent of Inventory

Two Form ”A” (normally open) relays rated at 30 Volts AC/DC up to 5 Amps
Supplied with whip antenna three feet of coaxial cable and bulkhead connector
Memory: storage for up to 40 MegaCode transmitters
Power: 12 - 30 VAC or 10.5 - 30 VDC
Codes: 1000000+ (MegaCode format)
RF frequency: 318 MHz

.......more details

Installation Manual

MDRG

Linear 1-Channel MegaCode Gate Receiver 318 MHz *** Discontinued

Activates one gate or device
Supplied with F-connector and whip antenna
Mounting bracket supplied
Memory: storage for up to 40 MegaCode transmitters
Power: 24 VAC/VDC
Codes: 1000000+ (MegaCode format)

.......more details

Programming Instructions

AC7

Felco C7 Cable Cutter 3/16" Capacity

Tool length: 8"
Gives a clean cut without crushing thanks to the triangular cutting system.
Blades and centre bolt in high-quality hardened steel for exceptional performance.
Thumb catch designed for one-handed operation.
Pressed steel handles with non-slip grips
Maximum cutting diameter: 7mm / 0.28in

.......more details

Data sheet

50-104-2

LiftMaster Orange Coil Cord 3-Wire 18-ga 20 ft. Extended Curly Cord

12FT-I-BEAM

LiftMaster 12' I-Beam Rail G3712RV / CD1012

10FT-I-BEAM

LiftMaster 10' chain drive rail 3710CH / CD1010

I-Beam chain rail for 3595 & ATS
Space required: 2" above heighest point of travel of the door

21-3260-1

LiftMaster Transformer 50/60Hz 60va 120/208/240/480V

120/208/240/480V PRIMARY 24V SECONDARY

IS-2

Interlock Switch for Sectional Doors

Mounts on the door track to prevent the use of the operator when door is locked
Can be wired to a three button station
Demensions: 3" h x 3" w x 1-1/2" d

CPS-UN4

LiftMaster Commercial Protector System Thru-Beam Eyes NEMA4

Waterproof photoeyes.
for direct connect to operators with Logic boards. L3 L4 L5
Receiving Eye - A: 50-50997 Sending Eye - A: 50-50998
These eyes will also work on the Micanan UL325 monitored operators

Installation Manual Manuel d'Installation Sell Sheet

10FT-RAIL-BELT

LiftMaster 10' belt drive rail 2770BD - colour code: Blue

Price reflects cost if purchased with an opener

8FT-RAIL-BELT

LiftMaster 8' belt drive rail 2778BD - colour code: White

Price reflects cost if purchased with an opener

881LMW

LiftMaster Motion-Detecting Control Panel with TTC Sec+ 2.0 Wi-Fi

Push button for garage door operation
Motion-detector automatically turns on the light when movement is detected
150 degree sensing angle for motion sensor
Program remote controls Wi-Fi Garage Door Openers and MyQ® enabled accessories directly from the control panel
Timer-to-Close feature automatically closes the garage door after a pre-programmed number of minutes - 1 5 or 10
Light run-time is 4 1/2 minutes with adjustable light timer option

.......more details

.375_5-1/4"-LH

Torsion Spring .375 x 5-1/4" x 12ft LH Yellow/Green

Wire size: .375
Inside diameter: 5-1/4"
Length: 12 ft

.283_3-3/4"-LH

Torsion Spring .283 x 3-3/4" x 12ft LH White

Wire size: .283
Inside diameter: 3-3/4"
Length: 12 ft

.262_2"-LH

Torsion Spring .262 x 2" x 12ft LH Red/Yellow

Wire size: .262
Inside diameter: 2"
Length: 12 ft

.225_1-3/4"-LH

Torsion Spring .225 x 1-3/4" x 12ft LH Orange/Green

Wire size: .225
Inside diameter: 1-3/4"
Length: 12 ft

374LMC*

LiftMaster 4-btn Sec+ Transmitter 315 MHz - DISC

Compatible with wireless keypad model number 377LMC
Compatible with Liftmaster garage door opener model numbers 3595 3585 3575 3500 3280 3265 3220 3255 3245 3110 1356 1355 1346 1345 ATS2113X ATS2113X-CX HCT501130 LGO50113O LGO50113L LGO50113R LGO50113XR
This transmitter is replaced by 894LT

41A5668

LiftMaster Gear & Sprocket Assembly for ATS211X

For models: ATS211X ATS2113X
For older model ATS211 use part number 41C4470

Installation Manual Manuel d'Installation

30B532

LiftMaster Capacitor 53uF-64uF 220V

For 1/2 HP models
Dimensions: 1-5/16" diameter x 4-3/16" long (including the terminals)

19-3025

Roller Chain #50 Nickel Plated 25ft Length

CAM005

Manaras Limit Cam 5/8-18 UNF

Limit cam for Mountshaft009
2 cam's required per shaft

41A4885-2

LiftMaster MVIS Pulley & Worm Gear Assembly

Gear and sprocket assembly for belt drive models between 1995-2002

Installation Manual Manuel d'Installation

41C4398A

LiftMaster RPM Sensor Kit

RPM sensor assembly 1986 - present

Installation Manual_bilingual

.468_5-1/4"-RH

Torsion Spring .468 x 5-1/4" x 12ft RH Blue/Orange

Wire size: .468
Inside diameter: 5-1/4"
Length: 12 ft

.273_3-3/4"-RH

Torsion Spring .273 x 3-3/4" x 12ft RH Orange/Red

Wire size: .273
Inside diameter: 3-3/4"
Length: 12 ft

23-10041-1

LiftMaster Double Limit Switch Commercial DP DT

Double limit switch DP DT
For LiftMaster and Micanan operators

PL-SW-PHOTO

Lynx Silent Guard Photocell for Proline Openers

For models built from 2000+
Comes with photoeyes wire and bracket

RA-LPL-KEYPAD

Lynx Wireless Proline Keyless Entry 303 MHz

Illuminated keypad
Weather shutter protects keypad from elements
1 to 6 digit codes for maximum security
Allows for access without remote or keys
Compatible with Lynx residential openers built from 2000+
Mounting screws and 9V battery included

.......more details

Compatibility chart

LYNX-RCVR-OCS

Lynx O/C/S Receiver

For use with Lynx o/c/s transmitter # T3B-OCS

Compatibility chart

877LM

LiftMaster Sec+ 2.0 Keyless Entry

Features Security+2.0™ rolling code technology
One-button-to-close feature
Temporary password option
Program code directly from keypad
Backlit keypad
Includes 9V battery

.......more details

877LM Manual

SESMT03

Erone Wall Support for Transmitter

Wall support for one S2TR2641 transmitter
Color: Grey
Velcro and mounting hardware included

Wireless System Chart

OSH-6113-ECB

Manaras Opera-SH 3/4HP 120V 1Ph with Electronic Circuit Board

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
25 cycles per day > 100 cycles per day

.......more details

Installation Manual Sell Sheet

8FT-TROLLEY-SET

LiftMaster 8ft Double Angle Rail Set for Comm. Trolley Ops 19-5808-P (2pcs) *Actual length 131"*

Double Angle Rails for doors up to 8' 6" high
Works with models : MT T GT APT
Indicated selling price is calculated with the purchase of a commercial operator. For pricing on a double angle rail only please contact us

TRANSF142

Manaras Transformer 575-24V 40VA

Transformer 575V Primary 24V Secondary 40VA

MH5011U-LH

LiftMaster 1/2 HP 120 Volt Medium Duty Jackshaft Operator

1/2 HP 120 volt 1 phase medium-duty hoist operator Logic board with integral 315 MHz radio receiver for Open/Close or Open/Stop/Close
CPSU commercial photoeyes included ( Nema 4 optional)
4L V-Belt #48 drive chain adjustable friction clutch
Emergency disconnect and chain hoist standard
Solenoid actuated disc brake
Door speed approximately 8" to 12" per second

.......more details

Installation Manual Manuel d'installation MH Sell Sheet MH Shop Drawing

MH5011U-RH

LiftMaster 1/2 HP 120 Volt Medium Duty Jackshaft Operator

1/2 HP 115 volt 1 phase medium-duty hoist operator
Logic board with integral 315 MHz radio receiver for Open/Close or Open/Stop/Close
CPSU commercial photoeyes included ( Nema 4 optional)
4L V-Belt #48 drive chain adjustable friction clutch
Emergency disconnect and chain hoist standard
Solenoid actuated disc brake

.......more details

Installation Manual Manuel d'installation MH Sell Sheet MH Shop Drawing

RADIO-16

Manaras MT2-1000 2-btn transmitter 313 MHz****Replaced by RADIO-EM903

Open/Close remote for 2 doors
Comes with LED battery life indicator
9V battery included
Sunvisor clip included

Programming Instructions

831-R

Allstar 1-Door O/C/S Receiver 107480 318 MHz ** To Extent of Inventory

Three channels - three relay outputs
Textured aluminum case
Terminal strip for wiring
Wire whip antenna with "F" connector
Compatible with Allstar Classic Allister and Pulsar dipswitch transmitters and MVP quik-code transmitters
Power: 24 VAC

.......more details

Programming Instructions - Dip Switch Version Programming Instructions - Learn Button Version

110554

Allstar MVP 1-Door O/C/S Receiver 318 MHz ***Replaced by P-831RE

Three channels - three relay outputs
8-wire operator connection
Wire whip antenna with "F" connector
Compatible with Allstar Classic Allister and Pulsar dipswitch transmitters and MVP quik-code transmitters
Power: 24 VAC/VDC
Codes: 19683

.......more details

Programming Instructions

DT

Linear 1-btn Delta3 Transmitter 310 MHz (DNT00002A)

Activates one Delta-3 receiver
Test/operate LED
Visor mounting clip supplied
Power: 9-volt battery
Codes: 256 (set by 8 dip switches)
RF frequency: 310 MHz

.......more details

Programming Instructions

HAE00002

Linear Safety Beam Set *** No Longer Available

Set includes: Sender and Receiver photocells wire and connectors
Safety beams will work with all Linear operators that currently have safety beams installed.

1007-1-5/8-24'

Aluminum Bottom Retainer Flat Fits Doors 1-5/8 to 1-3/4" Thick**Actual Length 24'4"

For door thickness of 1-5/8" to 1-3/4"
die # A-25388

1005-1-3/8-16'

Aluminum Bottom Retainer U-Shaped 16' Long

For door thickness 1-3/8"

1003-1-5/8-8'

Aluminum Bottom Retainer L-Shaped

For 1-5/8" thick doors.

1104-16FT-DK-BN

Residential Side & Top PVC Weather-Strip with cap 16' Long - Commercial Brown (DN)

Commercial brown rigid vinyl retainer with commercial brown flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

1104-18FT-SAND

Residential Side & Top PVC Weather-Strip with cap 18' Long - Sandstone (D)

Sandstone rigid vinyl retainer with sandstone flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.
Also known as Taupe

1104-7FT-SAND

Residential Side & Top PVC Weather-Strip with cap 7' Long - Sandstone (D)

Sandstone rigid vinyl retainer with sandstone flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.
Also known as Taupe

7001-14-WHITE

Commercial Side & Top Weather-Strip 14' Long - White (W)

White galvanized steel with white dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.

25-42-80

Extension Spring 7' Door - 80 lbs Gold

Double - Loop
25" long 42" stretch 80 lb load
Sold individually
Rated for 10000 cycles

Spec Sheet

973LMC*

LiftMaster 3-btn Security+ Transmitter 390MHz - DISCONTINUED

390 MHz Secruty+ three button visor tranmsitter
Compatible with Security+ systems including Chamberlain Sears Craftsman and Raynor Openers (Safety Signal) manufactured 1997-2005
Visor clip and battery included (part # CR2032)
Same as 973LM 96LM 953CB 956CB
Discontinued 12/31/13 - Replacement options 375LMC 890MAX 893MAX 892LT 894LT

95-00114

Truck Door Rivet 1" Stainless Steel

Stainless steel construction
Round head design
Cross Reference: T #89217-0032

94-00002

Truck Door Clevis Pin 1/4" x 7/8"

Zinc Plated finish
1/4" x 7/8"

28-02101

Truck Door 2" Vertical Track and Right Angle Assembly 106.5" Roadside (LH) for Whiting Roll-Up Doors

SPECS: Length: 106.5" Fits door sizes: 91" - 100" high
Assembly includes: Right angle mounting track Vertical track and Torsion bracket
Cross Reference: W #2275-2
Galvanized steel 14 gauge construction
Tongue and groove for proper alignment at joints