Devanco Canada - Get The Right Garage Door Opener‎ and Parts

19-4071

LiftMaster Chain #40x71 No Master Link

#40 x 71 pitch no master link
Same as G194071
Compatible with LiftMaster Model SL595GL Slide Gate Operators.

TTC-1

Timer to Close Module 14-Pin

Works on LYNX-6000 board

MA012

LiftMaster Cam Arm with Magnet

Cam Arm for Liftmaster Mega Arm gate op.

WHITING-PW

Whiting White Urethane Topcoat Option Dry Freight Door Panel

This is an option when ordering a panel

MW00024

Chain Tensioner for 1"-1" Shafts Inside the Box

Chain spreader for installation with 1" operator shaft & 1" door shaft.
Includes 2 shaft collars and set screws.

SM101

Miller Edge Signature Module for T3 Monitored Plugs w/ JB-03

Commercial signature module for use in commercial door and gate operators built after August 29 2010.
Engineered to emulate monitored pulse signal required by some commercial door operators.
LED light indicates device power or fault conditions.
Nema 4
Temperature range: -31F to 158F
5 to 40V DC

.......more details

050DCTWFLK

LiftMaster Receiver Logic Board DC. WiFi Lock Capable Sec+ 2.0 ***replaced by 050DCTBFLK***

This is 315MHz Security+ 2.0® Lock Capable Receiver Logic Board featuring Wi-Fi® and powered by myQ®.
For use with various LiftMaster® DC Chain or Belt Drive Garage Door Opener models; manufactured after 2017 only.
The unit will feature a yellow learn button and two lock terminals

29150

Doorlec Transformer 600Vpr 120V sec. 50VA

883LMW

LiftMaster Door Control Bell Button Wi-Fi

Controls garage door operation and garage door opener lights
On-board programming capability makes it easy to program remote controls and MyQ® enabled accessories
Compatible only with Security+2.0™ LiftMaster® garage door openers enabled by MyQ® technology
Note: If your door control has an image of a light bulb above the light button with 3 wavy lines above it the door control is capable of placing a Wi-Fi Garage Door Opener into Wi-Fi Learn mode.

PHOTO-070

Manaras Monitored Photoelectric Cells N1 Thru-Beam 45' Range

Monitored NEMA 1 enclosure through-beam type photocell
4-Wire
Indoor
Range: 45 ft

Manual

ME-00009

Micanan Trolley Track Spreader Bar Assembly 1 Unit Only

3/4" x 5.79" long
2 are included when bought in the kit #MX-00119

PRO-SD-10011-U-LH

Micanan 1 HP 115V 1P Horizontal Sliding Door Op. Monitored ECB N1 Eyes Left Hand

Designed for use on commercial / industrial sliding doors or sliding fire doors
External radio control terminal strip
3-btn O/C/S control station Nema 1
#41 roller chain & sprockets on all internal drives
Heavy duty 5L v-belt
Solenoid brake standard

.......more details

7-2326

RW Pull Cord Kit

4-3/4" x 4-3/4" anchor for bracket and clip angle

FEP100N

Pneumatic Safety Edge End Caps Included Sold by the Foot

Must specify if L-retainer is required

LMWEKITU

LiftMaster Wireless Edge Kit Monitored

Meets 2016 UL 325 requirements
Innovative industry leading low-energy Bluetooth® transmission up to 130 ft. range
Integrated Diagnostics with Gate Operator Speed Installation
Protects up to 8 entrapment points
Receiver accepts up to 4 transmitters
Transmitter accepts up to 2 wired resistive edges

.......more details

Installation manual Manuel d'installation Instruction manual Manuel d'instructions Product Guide Guide de produit

SPRAY-431

Aluminum Touch Up Spray Paint 350g Bright White / Blanc Pur #431

350g
Replaces Gentek #801

CSW200501U

LiftMaster Commercial High-Traffic Swing Gate Operator 1/2 HP 120-240VAC

First choice for heavy-traffic applications such as large gated communities residential developments commercial complexes and private estates.
Unlike other systems the CSW gate operators are designed with a "non-scissor action" swing arm to greatly reduce the risk of injury
Bi-Part Delay Monitors and adjusts speed and position of each wing to ensure primary gate closes last.
Synchronized Close Simultaneously closes gates.
Pre-Motion Warning Alarm Activates onboard alarm three seconds prior to gate motion.
External Alarm Reset Button Instantly resets the built-in safety alarm siren.

.......more details

.262-258-L

Cut-to-Length Torsion Spring .262 x 2-5/8" Left Hand Wound Red/Yellow

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

PRO-GH-10011U-R

Micanan 1 HP 115V 1P Gearhead Operator N1 Eyes Monitored ECB Right Hand

Includes 3-btn O/C/S control station Nema 1
External radio control terminal strip
Heavy duty worm gear reduction in oil bath gearbox
Solenoid brake standard
#50 roller chain and sprockets on final drive
Emergency chain hoist with electrical cut-out switch for manual operation

.......more details

LJ8950W

LiftMaster Light Duty Commercial Jackshaft Op. for Rolling Doors

Ideal for smaller/lighter commercial doors with light duty cycle requirements
MyQ Technology Built-In Wi-Fi Real-Time Alerts
Smooth Start/Stop
Optional Accesories 827LM MyQ Remote LED light 485LM Battery Back-up 841LM Automatic Door Lock 480LMB Alternate Mounting Kit and LC-36A Light Curtain
Powerful Add-Ons 811LM and KPW5/KPW250

2520-437-BT-YELLW

Linear Token Acceptor Yellow 12" x 10" Locked Outdoor Encloser

Available in Black White or Yellow
Stand not included

PRO-X_MOD-3HP

Micanan Explosion-Proof Modification N-7/N-9 for 3HP

Modification includes an explosion-proof motor explosion proof fittings operator mounted explosion-proof electrical control enclosure and n explosion-proof three button station.

111854.0004

Overhead Logic Board 3/4 - 1 HP 208 460 3PH SX/HX UL

For RHX commercial ops. 3/4-1 Hp 3- phase operators

.437-514-R-C

Cut-to-Length Torsion Spring .437 x 5-1/4" Right Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-514-INSTALLED

.393-514-R-C

Cut-to-Length Torsion Spring .393 x 5-1/4" Right Hand Wound Coated ** Price by Quote Only

Priced per inch - cones & filler sold seperately
For factory installed cones use part no. C-514-INSTALLED

.393-334-R-C

Cut-to-Length Torsion Spring .393 x 3-3/4" Right Hand Wound Coated ** Price by Quote Only

Priced per inch - cones & filler sold seperately
For factory installed cones use part no. C-375-INSTALLED

620-100990

Linear Heater Kit Assembly 230V Cage Style

Cage style heater is suited for large post mount operators (HSLG GSLG VS-GSLG SWG VS-SWG)

.363-514-L-C

Cut-to-Length Torsion Spring .362 x 5-1/4" Left Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold separately
For factory installed cones use part no. C-514-INSTALLED

.312-514-R-C

Cut-to-Length Torsion Spring .312 x 5-1/4" Right Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-514-INSTALLED

.295-6-L-C

Cut-to-Length Torsion Spring .295 x 6" Left Hand Wound Coated ** Price by Quote Only

Priced per inch
For factory installed cones priced seperately - use part no. C-600-INSTALLED

.295-258-L-C

Cut-to-Length Torsion Spring .295 x 2-5/8" Left Hand Wound Coated ** Price by Quote Only

Priced per inch
For factory installed cones priced seperately - use part no. C-258-INSTALLED

.262-258-R-C

Cut-to-Length Torsion Spring .262 x 2-5/8" Right Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

.234-134-L-C

Cut-to-Length Torsion Spring .234 x 1-3/4" Left Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-134-INSTALLED

.225-258-R-C

Cut-to-Length Torsion Spring .225 x 2-5/8" Right Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

.225-258-L-C

Cut-to-Length Torsion Spring .225 x 2-5/8" Left Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

.225-2-L-C

Cut-to-Length Torsion Spring .225 x 2" Left Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

.207-2-L-C

Cut-to-Length Torsion Spring .207 x 2" Left Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

PRO-GH-7581U-L

Micanan 3/4HP 208V 1P Gearhead Operator N1 Eyes Monitored ECB Left Hand

Includes 3-btn O/C/S control station Nema 1
External radio control terminal strip
Heavy duty worm gear reduction in oil bath gearbox
Solenoid brake standard
#50 roller chain and sprockets on final drive
Emergency chain hoist with electrical cut-out switch for manual operation

.......more details

Installation manual Specification sheet

218757

Torque Force Spring Failure Device 1" Shaft Left Hand Side DT0054

For springs 2" up to 6"
This device can be applied on Industrial OH doors that are manual or motor operated
Must be installed on a keyed shaft

PRO-GH-5053U-R

Micanan 1/2HP 575V 3P Gearhead Operator N1 Eyes Monitored ECB Right Hand

Includes 3-btn O/C/S control station Nema 1
External radio control terminal strip
Heavy duty worm gear reduction in oil bath gearbox
Solenoid brake standard
#50 roller chain and sprockets on final drive
Emergency chain hoist with electrical cut-out switch for manual operation

.......more details

Installation manual Specification sheet

PRO-GH-5021U-R

Micanan 1/2HP 230V 1P Gearhead Operator N1 Eyes Monitored ECB Right Hand (PRO GHE)

Includes 3-btn O/C/S control station Nema 1
External radio control terminal strip
Heavy duty worm gear reduction in oil bath gearbox
Solenoid brake standard
#50 roller chain and sprockets on final drive
Emergency chain hoist with electrical cut-out switch for manual operation

.......more details

Installation manual Specification sheet

PRO-GH-5021U-L

Micanan 1/2HP 230V 1P Gearhead Operator N1 Eyes Monitored ECB Left Hand (PRO GHE)

Includes 3-btn O/C/S control station Nema 1
External radio control terminal strip
Heavy duty worm gear reduction in oil bath gearbox
Solenoid brake standard
#50 roller chain and sprockets on final drive
Emergency chain hoist with electrical cut-out switch for manual operation

.......more details

Installation manual Specification sheet

MP-00025

Micanan Auxiliary Chain Hoist for Jackshaft Op. / PRO-J (SCHAUX)

Allows for operation of a door by an auxiliary chain hoist.
Used primarily on center mount applications

LM2W-B

LiftMaster Photoelectric Smoke Detector 12/24VDC Standard 2-Wire (LMPD24-2W)

Plug-in detector line mounting base included
Large wire entry port
In-line terminals with SEMS screws
Mounts to octagonal and single-gang back boxes 4-square back boxes or direct to wall or ceiling
Stop-Drop N Lock attachment to base
Removable detector cover and chamber

.......more details

MOTOR189

Manaras Electric Motor 1/2HP 120V 1PH

Instant reverse
Medium-duty 1050 rpm
For OMT MLJ MLH MLT

PRO-HHD-10081U-L

Micanan 1 HP 208V 1P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Left Hand

1 HP208V 1 PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
N-1 Through-beam (MK-00649) photocells included. Other options available.
3-btn o/s/c (02-103) wall control station included
Adjustable Friction Clutch 5L320 drive belt
#50 Roller chain 18 tooth door sprocket included

.......more details

Installation Manual Specification Sheet

DW-3S-200

Fraba Air Wave Switch Small Housing NOC

Fraba DW3S-200 air switch
Normally Open Contact (NOC)
Small Housing does not come with copper end
Screw Type Connector
Housing dimensions: 101x48.5x48 mm (3.97x1.91x1.89 '')
Housing: ABS Switch: PA6V0

.......more details

Operating Instructions

MOTOR273

Manaras Electric Motor 3/4HP 208/480V 3Ph

Continuous-duty base mount ODP 60Hz
This item is compatible with BRAKE011

SOFT_EDGE-PROFILE

Devanco Canada Soft Edge Profile Sold per Foot

Yellow air-wave edge
Fits most 1-3/8" to 2" bottom retainers
300 feet in a roll

PRO-HB-7538U-RH

Micanan 3/4HP 380V 3P Hoist Op. with Brake N1 Eyes Monitored ECB Right Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake included

PRO-HB-7543U-RH

Micanan 3/4HP 460V 3P Hoist Op. with Brake N1 Eyes Monitored ECB Right Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake included

PRO-HB-7523U-LH

Micanan 3/4HP 230V 3P Hoist Op. with Brake N1 Eyes Monitored ECB Left Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake included

PRO-HB-7581U-LH

Micanan 3/4HP 208V 1P Hoist Op. with Brake N1 Eyes Monitored ECB Left Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake included

PRO-HB-5038U-RH

Micanan 1/2HP 380V 3P Hoist Op. with Brake N1 Eyes Monitored ECB Right Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake included
On-Board receiver holds up to 20 transmitters

PRO-HB-5081U-RH

Micanan 1/2HP 208V 1P Hoist Op. with Brake N1 Eyes Monitored ECB Right Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake included
On-Board receiver holds up to 20 transmitters

02-410

LiftMaster Commercial Key Control Station Open-Close and Off with Stop Button

Outdoor Surface Mount Nema 4/12 station
Standard key cylinder
Open/Close spring return to center (off)
Key removable in center position only
With Stop button

PRO-H-7538-U-LH

Micanan 3/4HP 380V 3P Hoist Operator N1 Eyes Monitored ECB Left Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake OPTIONAL

PRO-H-7521-U-RH

Micanan 3/4HP 230V 1P Hoist Operator N1 Eyes Monitored ECB Right Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake OPTIONAL

PRO-H-5038-U-LH

Micanan 1/2HP 380V 3P Hoist Operator N1 Eyes Monitored ECB Left Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake OPTIONAL
On-Board receiver holds up to 20 transmitters

PRO-H-5038-U-RH

Micanan 1/2HP 380V 3P Hoist Operator N1 Eyes Monitored ECB Right Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake OPTIONAL
On-Board receiver holds up to 20 transmitters

PRO-H-5023-U-LH

Micanan 1/2HP 230V 3P Hoist Operator N1 Eyes Monitored ECB Left Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake OPTIONAL
On-Board receiver holds up to 20 transmitters

PRO-H-5021-U-LH

Micanan 1/2HP 230V 1P Hoist Operator N1 Eyes Monitored ECB Left Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake OPTIONAL
On-Board receiver holds up to 20 transmitters

821LMB

LiftMaster MyQ Garage Universal Smartphone Garage Door Controller Second Generation *** To extent of Inventory. Repl 821LMC-S

Enables smartphone control of most major brands of garage door opener with photoeyes.
Includes Wi-Fi hub and door sensor

Sell sheet Brochure

K71-D1PH

LiftMaster Drum Brake Kit 1 Ph 115/230V (Late Model Logic 5 Shoe and Drum Models)

Internal Solenoid Drum Brake with Cable (120V Single Phase) Replacement Kit.
Compatible with LiftMaster® Logic 5.0 Model T SD J H and HJ Industrial-Duty Operators.
Complete service kit includes: Solenoid Cover Brake Solenoid Brake Drum Cable Mounting Plate and Installation Hardware.
Quiet preferred sound profile
Industry benchmark stopping performance with adjustability
Significantly reduced modes of failure

.......more details

Installation manual Manuel d'installation

SEA868

Erone Tuned Antenna 868MHz

Increase reception and/or range
11.5ft (3.5m) coaxial cable (RG 58) included
L-Shaped bracket for wall-mounting

Wireless System Chart

MDT-1B

Linear 1-Channel Visor Transmitter MegaCode Block Coded 318 MHz

Compatible with all Linear access receivers and controllers
Superior transmission range
Unique ”Extra” top button
High visibility operate LED
Visor clip included
Sold in lots of 10

.......more details

Programming instructions

MG-00127

Micanan Plastic Spacer for Boards (Short Length 0.382)

MM-00366

Micanan Circuit Board N-4 Support U-Bracket

MK-00009

Micanan 9-Pole Control Terminal Strip

MK-00036

Micanan Overload Reset 1-Phase 7 Amps

MK-00523

Micanan Reversing Contactor ABB Size 1 24V w/Interlock

LC2K1210B7 mini contactor

MK-00140

Micanan Reversing Relay 24VDC Coil DPDT (Flange Mount)

8-pin

MK-00228

Micanan Transformer 230V-24V-50VA

MK-00056

Micanan Transformer 230V-115V-50VA

MP-00075

Micanan Heavy Duty Front Idler (Trolley End Bracket) #410

MM-00334

Micanan Bearing Support Plate for 5HP PRO-GH (Reducer 120)

MK-00235

Micanan Flasher 120V

In closing cycle door will stop for 1.5 seconds and reverse to fully open

MK-00059

Micanan Timer 7 Day/24hr Economical

MK-00477

Micanan Timer Plug-In Type 0-10min 120V

TN29C

Wire Nuts (Marrette) Grey 22-14 AWG 100/Pkg

Screw-on connector
Wire Range: 22-14 AWG (Max = 1 x 14AWG wire with 1 x 20AWG wire & Min = 2x 22 AWG wire)
Rating: 105C (221F)
Voltage: 300V
Approval: CSA UL486C Listed

RB709U-NB

Linear GTO Garage Door Receiver Adapter Mighty Mule

The RB709 Garage Door Opener Adapter enables the Mighty Mule transmitters to open and close almost any garage door opener
Made to be used with the FM134 (two button) and the RB743 (three button) remote control transmitters or F310 Keypad
Easy to install with almost any garage door opener
One RB709 is needed for each garage door opener that will be controlled by the Mighty Mule transmitters

MV-00272

Micanan Key Switch O/C Single Gang Nema 1 Flush Mount

MV-00236

Micanan Key Switch O/C Tamper Proofw/Best Core Cylinder Nema 4 Surface Mount

MV-00008

Micanan 2-btn O/C Nema-4 Pushbutton Control Station

Surface mount
Non-Metallic

MD-00487

Micanan Roller Chain #60 Stainless Steel 10' Pack

50740

Doorlec On/Off Switch 575V 3Ph Gate Op

20amp

12119

Doorlec Commercial Aluminum Sliding Carriage with Teflon Insert

Works on all Doorlec trolley operators

.421-6-R

Cut-to-Length Torsion Spring .421 x 6" Right Hand Wound Gold

Priced per inch - cones & filler sold seperately
For factory installed cones use part no. C-600-INSTALLED

.421-334-L

Cut-to-Length Torsion Spring .421 x 3-3/4" Left Hand Wound Gold

Priced per inch - cones & filler sold seperately
For factory installed cones use part no. C-375-INSTALLED

.406-514-R

Cut-to-Length Torsion Spring .406 x 5-1/4" Right Hand Wound Blue/Yellow

Priced per inch - cones & filler sold seperately
For factory installed cones use part no. C-514-INSTALLED

.343-258-L

Cut-to-Length Torsion Spring .343 x 2-5/8" Left Hand Wound Blue/Red

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

.312-258-R

Cut-to-Length Torsion Spring .312 x 2-5/8" Right Hand Wound Yellow

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

.295-6-R

Cut-to-Length Torsion Spring .295 x 6" Right Hand Wound Blue

Priced per inch
For factory installed cones priced seperately - use part no. C-600-INSTALLED

.283-514-L

Cut-to-Length Torsion Spring .283 x 5-1/4" Left Hand Wound White

Priced per inch
For factory installed cones priced seperately - use part no. C-514-INSTALLED

PRO-J-7543-U-RH

Micanan 3/4HP 460V 3P Jackshaft Monitored ECB N1 Eyes Right Hand

On board receiver with antenna
Continuous duty industrial motor with overload protection
Heavy duty 5L V-belt
Adjustable friction clutch
Solenoid brake (optional PRO-JB) recommended for large doors
3/4" permanently lubricated & sealed precision ball bearings on pulley shaft

.......more details

Pro J Manual Specification Sheet

2996.3

Truck Door 2" Steel Roller 5" Long Stem Enclosed Bearing for Whiting Roll-Up Doors

A Whiting original

ME117-2W-BLK-U

Miller Edge 2-Wire Black Universal Outlet Sold by the Foot

Electromechanical slide in edge for 1" to 2" sectional doors.
Touch sensitive signaling allows for immediate stopping or reversing of motion. The ME117 is resistant to water flame and most common greases and oils.
Temperature range: -30F to 155F
Lead wire: 22 gauge universal
Sensitivity: nominal 6-8 PSI
2 wire NO configuration

.......more details