Devanco Canada - Get The Right Garage Door Opener‎ and Parts

AW-10

Miller Edge Air Wave Switch Only No Enclosure

Air pressure is lead via a hose or pipe to a diaphragm contact. This contact converts the positive or negative pressure into an electrical contact and pulse.
Applications: commercial sectional doors rolling doors and mass transit
Works on doors up to 60ft
Can be used with standard pneumatic hose and Miller Edge extrusion
Sensitivity: 2mm to 500mm
Ambient temperature range: -49F to 180F

.......more details

Instruction manual Sell sheet

SM101

Miller Edge Signature Module for T3 Monitored Plugs w/ JB-03

Commercial signature module for use in commercial door and gate operators built after August 29 2010.
Engineered to emulate monitored pulse signal required by some commercial door operators.
LED light indicates device power or fault conditions.
Nema 4
Temperature range: -31F to 158F
5 to 40V DC

.......more details

CPT215-END-KIT-T2

Miller Edge End Kit for CPT215 10K Ohm Resistor (T2) Configuration

Kit contains: (2) Caps (2) cages (1) wired plug (1) 10K plug (1) non-mon. plug (2) screws
No glue is required

CPT215-END-KIT-T3

Miller Edge End Kit for CPT215 Doide Capacitor (T3) Configuration

Kit contains: 2) Caps (2) cages (1) wired plug (1) diode capacitor plug (1) non-mon. plug (2) screws

CPT215-PER-FOOT

Miller Edge Field Configurable Sensing Edge Cut-to-Length

For do-it-yourself edges on sectional or rolling doors.
Black extrusion flexible PVC conductive polymer Ends: Molded polymer
End plugs and mounting channel sold separately.
Sensing edge size: 1-5/8"H (41mm) x 1-11/16"W (42mm)
When combined with the ME123 mounting channel ideal for 2" thick surfaces
Minimum Length: 3ft

.......more details

CPT-215-50

Miller Edge Field Configurable Sensing Edge 50 ft Roll

For do-it-yourself edges on sectional or rolling doors.
Black extrusion flexible PVC conductive polymer Ends: Molded polymer
End plugs and mounting channel sold separately.
Sensing edge size: 1-5/8"H (41mm) x 1-11/16"W (42mm)
When combined with the ME123 mounting channel ideal for 2" thick surfaces
Lead Wire 12 in. 22 gauge SJTO

.......more details

MC22-2WIRE-RH-BLK

Miller Edge MC22 2-Wire Non-Monitored Right Hand Black Includes Funny Flaps - Sold per Foot

��Electromechanical sensing edge for use on Cornell doors. •The MC22 is manufactured to exact specifications. •The MC22 is completely flexible and will contour to curved surfaces. •Touch sensitive signaling allows immediate reversing or stopping of motion. •Temperature range: -30F to 155F •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •2 wire NO configuration •Vertical or horizontal mount •One year warranty

Worksheet

MILLER-LEAD-WIRE

Miller Edge Up-Charge for Custom Length Lead Wire Sold by the Foot

Up charge for extra lead wire

RG-K-P

Miller Edge Reflecti-Guard Pulsed Photo Eye Monitored 30ft Range

Monitored retro-reflective technology
Includes: (1) wired emitter/receiver with integrated mounting bracket (1) reflector (1) reflector bracket
30 ft. range
Pulsed and relay models
Enhanced sunlight immunity
Impact resistant for rugged environments

.......more details

CG-4W-MON-BLK-RH

Miller Edge Clima-Guard 4-Wire Monitored Black Right Hand Outlet Sold by the Foot

Clima-Guard functions exactly like a pressure sensitive electric edge but with an added layer of protection.
The protective loop seal conforms to irregularities in the floor and helps prevent air infiltration and serves as a weather barrier.
ClimaGuard is made up of an ME112 sensing edge paired with a PVC loop seal that comes with a double slot mounting channel.
Electrical Configuration: Normally open
this edge comes with the channel

MAW123-YEL-RH

Miller Edge Air-Wave Edge Yellow Sold per Foot

This pressure sensitive air-wave edge can be adapted to suit a wide variety of applications.
When touch activated the MAW123 sends an immediate pulse of air through the extrusion to an air-wave switch which sends a signal to controls to stop and/or reverse operations.
It has been designed to fit most doors with double track bottom retainers.
With appropriate mounting channel this edge will fit nearly all doors from 11/2" to 2" thick.
The MAW123 is resistant to flame water and most common greases and oils.

CPT-223-PER-FT

Miller Edge Bulk Extrusion Sold per Foot

For DIY quick fixes to repair or replace sensing edges for sectional and rolling steel doors measuring 1-1/2" to 2" thick with a mounting channel.
Sensivity: 15lbs max activation
Lead wire 18"-22 gauge unversal
Wire configuration: N.O.
Electrical interface: sealed module- provides seamless connection to logic or relay type operators
ANSI/UL325 recognized component

.......more details

MEL-II-TX10

Miller Edge Monitored Edge Link-II Transmitter

Miller Edge Monitored Edge Link II TRANSMITTER ONLY
Monitors the presence and function of any 10K (T2) monitored sensing edge
Provides a monitored wireless signal transmission from the sensor to the operator controls
Improved immunity to RF interference with 916 MHz operating frequency
Eliminates visible coil cords and retracting reels
Saves installation time

.......more details

MEFF-PAIR

Miller Edge Funny Flaps for MC22 Sold as a Pair

Funny Flaps for use with the MC22 Sensing Edge and are a great fit for an application where extra sensitivity is needed
They're necessary to fill the gap between the edge and guide within the sensing edge system and their flexible durable construction offers an alternative to more rigid standard sensing edge setups.

MC22-2WIRE-LH-G

Miller Edge MC22 2-Wire Non-Monitored Left Hand Gray Includes Funny Flaps - Sold per Foot

��Electromechanical sensing edge for use on Cornell doors. •The MC22 is manufactured to exact specifications. •The MC22 is completely flexible and will contour to curved surfaces. •Touch sensitive signaling allows immediate reversing or stopping of motion. •Temperature range: -30F to 155F •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •2 wire NO configuration •Vertical or horizontal mount •One year warranty

Worksheet

MIRF-T2

Miller Edge Patriot 2 Photo Eye Non-Monitored 30ft Non-Contact

Attaches directly to a Sectional door.
The photo eyes travel below the door during the closing cycle.
Unlike traditional static mount photo eyes; Patriot travels with the door sensing obstructions prior to contact.
The Patriot2 non-contact system consists of thru beam photo optics.
Emitting and receiving eyes mount into a rigid steel spring loaded retracting housing.
The housings attach to the bottom section of the door and extend below the leading edge of the door providing an invisible infrared light beam of protection.

.......more details

JB-02P-W

Miller Edge Junction Box Nema 4

For use with commercial door operators and CPT sensing edges from Miller Edge
Waterproof
Accommodates wire .181 to .312

Installation instructions

JB-02

Miller Edge Junction Box Metal

For commercial overhead doors that use coil cords or retracting reels
Standard metal junction box with cover
Includes 1 x 90-degree connector 1 straight connector
Includes strain relief + 2 wire nuts + pop-out holes
For single-angle bottom bar of rolling steel door
Also compatible with sectional door

.......more details

CPT-223-K5

Miller Edge Non-Monitored End Plug Kit

For use with the CPT-223-50 bulk extrusion
Kit includes: 5 wired 5 Non-Monitored end plugs and 5 1/8oz tube of vinyl adhesive
One kit is enough to make 5 non-monitored edges

CPT-223-50

Miller Edge Bulk Extrusion 50' roll

For DIY quick fixes to repair or replace sensing edges for sectional and rolling steel doors measuring 1-1/2" to 2" thick with a mounting channel.
Sensivity: 15lbs max activation
Lead wire 18"-22 gauge unversal
Wire configuration: N.O.
Electrical interface: sealed module- provides seamless connection to logic or relay type operators
ANSI/UL325 recognized component

.......more details


User Name:
Password:
Remember Me:

	Forgot your password
Request a Login