Devanco Canada - Get The Right Garage Door Opener‎ and Parts

MDR/U

Linear 1-Channel MegaCode Universal Plug-In Receiver 318 MHz

Makes any garage door operator compatible with MegaCode transmitters
Simple plug-in design
Easy to install - one connection using two-conductor wire
Memory: storage for up to 10 MegaCode transmitters
Normally open contact activates for 0.5 seconds
Power: 110 VAC +/- 10% 60 Hz

.......more details

MINI-T

Linear 1-Channel Delta3 Key Ring Transmitter 310 MHz (DNT00026)

Activates one Delta-3 receiver
Test/operate LED
Key ring not supplied
Power: 12 V battery
Frequency: 310 MHz
Codes: 256 (set by dip switches)

.......more details

Programming Instructions

DT2A

Linear 2-btn Delta3 Transmitter 310 MHz (DNT00017A)

Activates two Delta-3 receivers independently
Test/operate LED
Visor mounting clip supplied
Power: 9-volt battery
Codes: 256 (set by dip switches)
RF frequency: 310 MHz

.......more details

Programming Instructions

MTS1

Linear 1-btn MegaCode Transmitter 318 MHz (DNT00091)

Activates one 318 MHz MegaCode receiver
Test/operate LED
Visor mounting clip supplied
Two CR2032 batteries included
Codes: 1000000+ (MegaCode format)
Dimensions: 3" W x 1.875" H x .625" D

.......more details

Programming instructions Instructions de programmation

LDC801

Linear 800 Newton DC Powered Garage Door Opener Accept Both Belt or Chain Rail (LDCO801)

The energy-efficient DC-powered operator that runs at an AC-equivalent speed.
DC drive motor with soft-start and soft-stop for smooth quiet long-term reliable performance.
Optional Battery Backup available for added peace of mind. Sold separately
Low-power standby mode dramatically reduces energy consumption
Supplies 800 Newtons of lifting force for heavy doors
Compatible with belt-drive or chain-drive T or I beam rails up to 10'

.......more details

Remote compatibility chart

ACT-31B

Linear 1-Channel Block Coded MegaCode Key Ring Transmitter 318 MHz (ACP00879)

Compatible with all Linear access receivers and controllers
Supplied with quick-disconnect key ring
Power: Two CR2016 batteries incl.
Codes: Factory block coded in MegaCode format
RF frequency: 318 MHz
Dimensions: 1.25" W x 2.25" H x .48" D

.......more details

Programming Instructions

DT-312

Linear 1-btn Delta3 Transmitter 312 MHz *No Longer Available*

Activates one Delta-3 receiver
Test/operate LED
Visor mounting clip supplied
Power: 9-volt battery
Codes: 256 (set by dip switches)
RF frequency: 312 MHz

.......more details

Programming Instructions

DXSR-1504

Linear Supervised 4-Channel Reciever ***No Longer Available

Dual diversity superheterodyne receivers
Compatible with DX and DXS transmitters
Measured line-of-sight range of 1500 Feet
Quick-learn programming
Selectable supervision
Individual outputs per RF channel for alarm low battery and status trouble reports

.......more details

XT-1H

Linear 1-Channel Hand-Held Mid-Range Transmitter ** To extent of inventory

Up to two miles of line-of-sight range
RF transmit LED
Push button activation
Includes belt clip
Antenna included
Power: Two 9-volt batteries

.......more details

XR-1

Linear Single Channel Mid-Range Receiver ** Discontinued

1-channel mid-range receiver
Up to 10 miles line-of-sight range (with XT-1 & XT-4)
Up to 2 miles of line-of-sight with handheld devices
Over 64 000 codes
Weather-resistant case
RF frequency; 27.255 MHz

.......more details

WOR

Linear Wiegand Output Receiver 318 MHz

Designed for use as an access control interface for Linear’s block coded digital transmitters.
The unit receives signals from transmitters adds a facility code to the data and sends the information to the Wiegand input of the access control panel via a 5-wire connection
Ideal way to facilitate handicapped access
Multi-button transmitters can double as personal emergency devices for triggering security alarms
RF input/Wiegand output receiver supports 26 30 and 31-bit data formats
Wide selection of MegaCode (over 1 million codes) format transmitters with available block coding

.......more details

VS-GSLG-723

Linear Industrial Duty Variable Speed Slide Gate Op. 2 HP 230V 3 PH

Up to 24" per second gate speed
Max gate length: 100 ft
Max gate weight: 4000 lbs
Integral APeX Controller
Soft start/soft stop
Programmable speed control

.......more details

Installation manual Spec sheet

SLR-221

Linear Residential Slide Gate Op. 1/2HP 230V 1 Ph - Cold Weather Package NOT Included

Integral entrapment sensing system with digital set point for quick accurate adjustment and enhanced safety
Continuous-tone entrapment alarm with reset button
LED diagnostic display for ease of setup and troubleshooting
Selectable pre-start and run alarm with provision for ADA compliant visual pre-start and run alarm
Regulated 24 Volt DC power available for access control accessories
Integrated maximum run and auto close timer (0-9 minutes)

.......more details

SLC-221

Linear Commercial Slide Gate Op. 1/2HP 230V 1 Ph - Cold Weather Package NOT Included

Integral entrapment sensing system with digital set point for quick accurate adjustment and enhanced safety
Continuous-tone entrapment alarm with reset button
LED diagnostic display for ease of setup and troubleshooting
Selectable pre-start and run alarm with provision for ADA compliant visual pre-start and run alarm
Regulated 24 Volt DC power available for access control accessories
Integrated maximum run and auto close timer (0-9 minutes)

.......more details

RB741

Linear / GTO 1-Button Transmitter 318 Mhz

Standard transmitter included with all GTO gate operators
Much smaller in size than previous model and improved signal range
The single button controls the gate operator and has adjustable code settings and has (new miniature) visor clip for your vehicle and now a whole for key-ring or key chain.
It is compatible with GTO and Mighty Mule gate operators
The code settings are the 9 dipswitches located inside the cover.
Measures: 2-1/2 H x 1-1/2 W x 9/16 D.

.......more details

RB709U-NB

Linear GTO Garage Door Receiver Adapter Mighty Mule

The RB709 Garage Door Opener Adapter enables the Mighty Mule transmitters to open and close almost any garage door opener
Made to be used with the FM134 (two button) and the RB743 (three button) remote control transmitters or F310 Keypad
Easy to install with almost any garage door opener
One RB709 is needed for each garage door opener that will be controlled by the Mighty Mule transmitters