Devanco Canada - Get The Right Garage Door Opener‎ and Parts

21-3260-1

LiftMaster Transformer 50/60Hz 60va 120/208/240/480V

120/208/240/480V PRIMARY 24V SECONDARY

14FT-I-BEAM

LiftMaster 14' I-Beam Rail 3714RV / CD1014

I-Beam Chain Drive Rail for model 3595

K001A6424-1

LiftMaster Circuit Board Assembly Kit 2010 390 MHz

Installation Manual

CR2450

Maxcell/Renata 3V Lithium Button Cell

CR2032

Maxcell/Renata 3V Lithium Button Cell

ME123-YELLOW-U

Miller Edge Yellow Universal Outlet 2-Wire 2" wide x 1-1/2" high Sold by the Foot

Electromechanical slide in edge for sectional doors and sliding gates.
Touch sensitive singaling allows for immediate stopping and reversing of motion
Temperature range: -30F to 155F
Lead wire: 22 gauge universal
Sensitivity: nominal 6-8 PSI
2 wire NO configuration

.......more details

Installation Manual Worksheet Sell Sheet

ME123-YELLOW-RH

Miller Edge Yellow Right Hand Outlet 2-Wire 2" wide x 1-1/2" high Sold by the Foot

Electromechanical slide in edge for sectional doors and sliding gates.
Touch sensitive singaling allows for immediate stopping and reversing of motion
Temperature range: -30F to 155F
Lead wire: 22 gauge universal
Sensitivity: nominal 6-8 PSI
2 wire NO configuration

.......more details

Installation Manual Worksheet Sell Sheet

ME123-BLK-RH

Miller Edge Black Right Hand Outlet 2-Wire 2" wide x 1-1/2" high Sold by the Foot

Electromechanical slide in edge for sectional doors and sliding gates.
Touch sensitive singaling allows for immediate stopping and reversing of motion
Temperature range: -30F to 155F
Lead wire: 22 gauge universal
Sensitivity: nominal 6-8 PSI
2 wire NO configuration

.......more details

Installation Manual Worksheet Sell Sheet

312HMC

LiftMaster Universal Coaxial Receiver Sec+ 315 MHz

External 8" coaxial antenna included
Security+ rolling code technology and/or Dip switch compatibility
12 VDC or 18-35 VAC/DC jumper selectable
Momentary or constant contact selectable
For replacement antenna use 41C3196
Accepts up to 31 remote control codes on Normal Security setting

.......more details

Programming Instructions Instructions de programmation

.250_1-3/4"-LH

Torsion Spring .250 x 1-3/4" x 12ft LH Green

Wire size: .250
Inside diameter: 1-3/4"
Length: 12 ft

LSBLK

Loop Sealant Cartridge Black 29oz

Also available in grey (LSGRY)
Can be installed in sub-zero temperatures as long as the surface is clean and dry
Loop sealant gun sold separatley # LSGUN

71AB120

LiftMaster Solenoid Brake Assembly for APT Logic 4

omplete disk brake assemble including 2-wire solenoid

Installation Manual

71-B120

LiftMaster Interior Mount Solenoid Brake 115V

Instruction Manual

41C4470

LiftMaster Gear & Sprocket Assembly for ATS211

Complete Gear and sprocket assembly for ATS211 ATS211R built from 1993 - 2003

Installation Manual Manuel d'Installation

41A4885-5

LiftMaster MVIS Pulley/ Worm Gear Assembly

Gear and sprocket assembly for belt drive units after 2002.
Assembly includes: Spring washer thrust washer retaining ring bearing plate two roll pins drive gear and worm gear helical gear with retainer and grease.

Installation Manual Manuel d'Installation

23-2017

LiftMaster Limit Switch SPDT

4A1344

LiftMaster Light Socket Plastic (41C279)

24-24-6

Small Relay 24VAC 11-Pin 3 PDT

144C56

LiftMaster Idler - Cable Pulley for chain drive

For square rail assemblies
Same as 144C0056

.363_6"-RH

Torsion Spring .363 x 6" x 12ft RH Green/White

Wire size: .363
Inside diameter: 6"
Length: 12 ft

.468_5-1/4"-RH

Torsion Spring .468 x 5-1/4" x 12ft RH Blue/Orange. **NLA

Wire size: .468
Inside diameter: 5-1/4"
Length: 12 ft

.406_5-1/4"-RH

Torsion Spring .406 x 5-1/4" x 12ft RH Blue/Yellow

Wire size: .406
Inside diameter: 5-1/4"
Length: 12 ft

.363_5-1/4"-RH

Torsion Spring .363 x 5-1/4" x 12ft RH Green/White

Wire size: .363
Inside diameter: 5-1/4"
Length: 12 ft

.331_5-1/4"-RH

Torsion Spring .331 x 5-1/4" x 12ft RH Red/White

Wire size: .331
Inside diameter: 5-1/4"
Length: 12 ft

.393_3-3/4"-RH

Torsion Spring .393 x 3-3/4" x 12ft RH Orange

Wire size: .393
Inside diameter: 3-3/4"
Length: 12 ft

.319_3-3/4"-RH

Torsion Spring .319 x 3-3/4" x 12ft RH Blue/Green

Wire size: .319
Inside diameter: 3-3/4"
Length: 12 ft

.312_3-3/4"-RH

Torsion Spring .312 x 3-3/4" x 12ft RHW Yellow

Wire size: .312
Inside diameter: 3-3/4"
Length: 12 ft

.331_2-5/8"-RH

Torsion Spring .331 x 2-5/8" x 12ft RH Red/White

Wire size: .331
Inside diameter: 2-5/8"
Length: 12 ft

.250_2-5/8"-RH

Torsion Spring .250 x 2-5/8" x 12ft RH Green

Wire size: .250
Inside diameter: 2-5/8"
Length: 12 ft

.273_2"-RH

Torsion Spring .273 x 2" x 12ft RH Orange/Red

Wire size: .273
Inside diameter: 2"
Length: 12 ft

.283_2"-RH

Torsion Spring .283 x 2" x 12ft RH White

Wire size: .283
Inside diameter: 2"
Length: 12 ft

.207_2"-RH

Torsion Spring .207 x 2" x 12ft RH Brown

Wire size: .207
Inside diameter: 2"
Length: 12 ft

.283_1-3/4"-RH

Torsion Spring .283 x 1-3/4" x 12ft RH White

Wire size: .283
Inside diameter: 1-3/4"
Length: 12 ft

50307

Doorlec Cam Shaft Sub-Assembly EHJ ETH ETBH LJH

For models; EHJ ETBH and ETH
Assembly includes: Cam shaft (26140) Oilite (11801) x 2 Sprocket 41B12-5/8" (31118) Flange Bearing (28002) x 2 and nuts.

12561

Doorlec Brake Drum 4" Diameter

Fits all Doorlec operators equipped with brake shoes

MJ00005

Micanan Clutch Pad 3/4" ID

Used on all Micanan commercial operators & PRO-GO gate operator
3/4" inside diameter 4" outside diameter

T2B-DS

Lynx 2-btn Transmitter Dip Switch 303 MHz

Ultra secure mid-size transmitter with 8 dip-switches for coding
2-buttons provides control for 2 Lynx operators
Compatible with HomeLink in-vehicle remote control
Can be mounted on visor with saddle clip or carried on a keychain
Visor clip and 12V battery included
Will work with Lynx residential operators built from 2000 and up.

.......more details

Compatibility chart

SEL2641R433-C2P

Erone 2-Relay Stand Alone Power Receiver 433MHz

Up to 85 transmitter keys
1 NO relay + 1 NO/NC relay (230Vac)
Self-learning memorization
Relays with Pulse step or delayed operating mode.
Power requirements: 12/24Vac/dc
Dimensions: 140 x 115 x 53mm (5.5 x 4.5 x 2in)

.......more details

Installation Manual Wireless System Chart

SEL2641R433-Z4

Erone 4-Relay Stand Alone Receiver 433MHz

Up to 85 transmitter keys
2 NO relay + 2 NO/NC relay (24VA)
Self-learning memorization
Standard pulse output Relay number 4 can be setup to latched output
Can be used for O/S/C
Power requirements: 12/24Vac/dc

.......more details

Sell Sheet Brochure Wireless System Chart

OSH-6532-ECB

Manaras Opera-SH 1/2HP 600V 3Ph with Electronic Circuit Board ** To extent of Inventory

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation brake and a floor level engaging device
Clearence: side room required 16"

Installation Manual Sell Sheet

OPH-6112-ECB

Manaras Opera-H 1/2HP 120V 1Ph with Electronic Circuit Board

A heavy-duty industrial jackshaft operator.
For use on Standard High and Vertical Lift sectional doors.
Can also be used on Rolling doors or Grilles.
Comes with a self-engaging chain hoist for manual operation.
Clearence: side room required 15"
25 cycles per hour 100 cycles per day

.......more details

Installation Manual Sell Sheet

MOUNTSHAFT001

Manaras Clutch Shaft Kit for MJH (pre-1998)

Input / clutch shaft kit for MJH models up to mid-1998
Kit includes V-belt 4L360 to fit with newer deeper pulley
For MJH built after 1999 use MOUNTSHAFT001A

Drawing

VBELT_5L350

Manaras VBelt 5L 35" - repl. by B32

Used on MTH MTBH MSL models
Type B
Inside length 32 inches

VBELT_4L360

Manaras VBelt 4L 36" - repl. by A34

Used on MJ / MJH models
New belt type A replaces old 4L360. Part number VBELTA34

LIMIT006

Manaras Single Micro Limit Switch with Flat Lever

Fits old medium-duty Manaras operators such as MDJ
SPDT - Cherry

Limit Switch Chart

LIMIT025

Manaras Single Snap-Action Limit Switch with Flat Lever

Replacement for LIMIT001
For all Manaras commercial operators prior to 2000 - except light duty models
Can be used on Doorlec Lynx and others
Unimax (SPDT)

Limit Switch Chart

DRUM005

Manaras Steel Brake Drum 5/8" - replaces DRUM004

Replaces DRUM004
Brake drum with edges for current braking systems (2000 - current)
Used on all Manaras operators except Gear Head models.
Use with BRAKEPART019 (old part BRAKEPART017)

BRAKEPART018

Manaras Brake Shoe Assembly Kit

Kit includes SHOE001 & SHOE002 for old brake system.
Fits all Manaras operators except gear head made prior to 1999.

Drawing

DISCONNECT001

Manaras Floor Level Disconnect Lever

RADIO-42

Manaras MCT-4 3-btn O/C/S transmitter 4 doors 313 MHz **Replaced by RADIO-EM932 or MV-00024

Open/Close/Stop remote for 4 doors.
By selecting A B C or D on the rotary switch you can operate any of the four doors.
Comes with LED battery life indicator.
9V battery included.
Can be wall or post mounted.
Must be used with 4 MCR series receivers.

.......more details

Programming Instructions

RADIO-15

Manaras MRX-1000 1-Channel 24V Receiver with Commercial Antenna 313 MHz ** To extent of inventory

Controls one operator with MT series transmitters.
Operates on 24VAC.
A LED indicates that the unit has been activated.
Can be installed directly onto the control box of a Manaras operator.
Includes a commercial receiver antenna for increased range.
Will be replaced by RADIO-RE901A

.......more details

Installation Instructions

308302

Linear 2-Channel Multi-Code Key Ring Transmitter 310 MHz

Open/Close remote for 2 doors
Compatible with 310 MHz Stanley and Multi-Code receivers
Easy access to battery and coding switches - 10 dip switches
Power: 12-volt battery
Codes: 1024 codes for each channel (set by dip switches)
RF frequency: 310 MHz

.......more details

Programming Instructions

109710

Linear 4-Channel Multi-Code Visor Transmitter 310 MHz

Open/Close remote for 4 doors
Compatible with 310 MHz Stanley and Multi-Code receivers
Supplied with visor clip
Easy access to battery and coding switches - 10 dip switches
Power: 9-volt battery
Codes: 512 per channel (set by dip switches)

.......more details

Programming Instructions

1336.4

Whiting Roadside Top Panel Closure Bracket for 8" radius track

1336.2

Whiting Roadside Top panel Closure Bracket 10" Raduis

MDR

Linear 1-Channel MegaCode Receiver 318 MHz *** Discontinued

Activates one device
Wire lead antenna
Mounting bracket supplied
Memory: storage for up to 10 MegaCode transmitters
Power: 24 VAC/VDC
Codes: 1000000+ (MegaCode format)

.......more details

Programming Instructions

8833TC

Allstar 3-btn 9-Door Transmitter 109023 318 MHz ***Replaced by P-8833TC

Open/Close remote for 9 doors
Compatible Allstar and MVP receivers
Portable transmitter
Easy access to battery and coding switch
Slide switch selects door trio to operate
Power: 9-volt battery

.......more details

Programming Instructions

41A2816

Jobber Drive Gear for Chamberlain Sears LiftMaster residential operators

Drive gear for Chamberlain / LiftMaster / Sears residential garage door openers built 1984 +
This is an excellent quality aftermarket product

HAE00032

Linear 8ft Chain Assembly (HCT8)

217436

Linear Drive Sprocket - Chain (HCT)

HAE00049

Linear Drive Sprocket Holder and Belt Clamp

232168

Capacitor 3/4 HP 220V 65 MFD

For LCO75 only

219109

Capacitor 1/3 HP 43-53 MFD 250V

For LDO33 only

1336.7

Whiting Stainless Steel Curbside Top Closure Bracket for 8" radius

1920.1

Whiting Stainless Steel Top Closure Mounting Plate for Insulated Doors

1336.5

Whiting Stainless Steel Curbside Top Closure Bracket for 10" radius

600BH

6" Heavy Brush Insert 8ft Long

Polypropylene bristles

300BL

3" Light Brush Insert 6ft Long

Polypropylene bristles
Same as model MS1705

600BL

6" Light Brush Insert 6ft Long

Polypropylene bristles

4007-12FT

Aluminum Retainer only for Light Brush 90 degree**Actual Length 12'2"

For angle application
For use with Light Brush or Vinyl Insert.
die # A-25060

4007-6FT

Aluminum Retainer only for Light Brush 90 degree***Actual Length 6'1"

For angle application (90 degree).
For use with Light Brush or Vinyl Insert.

1003-4"-YELLOW

Bottom U-Rubber 4" Yellow 200' Long

4" yellow vinyl insert 200ft spool.

1009-1-3/4"

Bottom Nail-On for Wood Door Heavy Duty per foot

For 1-3/4" commercial doors.
Color: Black

1014-1-5/8-16'

Rigid Vinyl Bottom Retainer Notched 16' Long

Black - for door thickness of 1-5/8"

1004-2-24'

Aluminum Bottom Retainer 2" U-Shape with Reinforcement 24 ft***Actual Length 24'4"***

For door thickness 2"

1003-2-8'

Aluminum Bottom Retainer L-Shaped 8' Long

For 2" thick doors.

1003-1-3/8-24'

Aluminum Bottom Retainer L-Shaped

For 1-3/8" thick doors.
DIE # ES18009

7001-12-BROWN

Commercial Side & Top Weather-Strip 12' Long - Brown (DN)

Brown galvanized steel with brown dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.

7001-10-BROWN

Commercial Side & Top Weather-Strip 10' Long - Brown (DN)

Brown galvanized steel with brown dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.

1104-9FT-DK-BRN

Residential Side & Top PVC Weather-Strip with cap 9' Long - Commercial Brown (DN)

Commercial brown rigid vinyl retainer with commercial brown flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

1104-8FT-SAND

Residential Side & Top PVC Weather-Strip with cap 8' Long - Sandstone (D)

Sandstone rigid vinyl retainer with sandstone flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.
Also known as Taupe

7001-16-WHITE

Commercial Side & Top Weather-Strip 16' Long - White (W)

White galvanized steel with white dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.

7001-10-WHITE

Commercial Side & Top Weather-Strip 10' Long - White (W)

White galvanized steel with white dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.

7001-12-WHITE

Commercial Side & Top Weather-Strip 12' Long - White (W)

White galvanized steel with white dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.

7001-7-WHITE

Commercial Side & Top Weather-Strip 7' Long - White 7001-WW (W)

White galvanized steel with white dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.

1106-14-BLACK

Commercial Side & Top Weather-Strip 14' Long - Black

Aluminum retainer with black dual fin vinyl

1001-12-BLACK

Commercial Side & Top Weather-Strip 12' Long - Black

Aluminum retainer with black dual-fin vinyl

32-48-170

Extension Spring 8' Door - 170 lbs Orange ** Replaced by 27-48-170

Double - Loop
32" long 48" stretch 170 lb load
Springs sold individually
Rated for 10000 cycles

Spec Sheet

32-48-80

Extension Spring 8' Door - 80 lbs Gold ** check for availability

Double - Loop
32" long 48" stretch 80 lb load
Springs sold individually

25-42-200

Extension Spring 7' Door - 200 lbs Tan

Double - Loop
25" long 42" stretch 200 lb load
Sold individually
Rated for 10000 cycles
Same as part number 120

Spec Sheet

25-42-120

Extension Spring 7' Door - 120 lbs Green

Double - Loop
25" long 42" stretch 120 lb load
Sold individually
Rated for 10000 cycles

Spec Sheet

25-42-70

Extension Spring 7' Door - 70 lbs Orange

Double - Loop
25" long 42" stretch 70 lb load
Sold individually
Rated for 10000 cycles

Spec Sheet

28-32081

Truck Door 2" Horizontal Track with 8" Radius 120" Roadside (LH) for Whiting Roll-Up Doors

SPECS: Length: 120" Fits door sizes: Greater than 96" high
Cross Reference: W #11-3
Galvanized steel 14 gauge construction
Tongue and groove for proper alignment at joints
8" radius
For use with 2" diameter steel or nylon rollers

.......more details

91-00400

Truck Door Step Bolt 1/4"-20 x 1.25" (3/4" head)- Sold Per Piece

Zinc plated finish
Cross Reference: T #80015-1610 120250

28-02290

Truck Door 2" Vertical Track & Right Angle Assembly 96.5" Curbside (RH) for Whiting Roll-Up Doors

SPECS: Length: 96.5" Fits door sizes: 72" - 90" high
Assembly includes: Right angle mounting track Vertical track and Torsion bracket
Cross Reference: W #2275-1
Galvanized steel 14 gauge construction
Tongue and groove for proper alignment at joints

28-02114

Truck Door 2" Vertical Track and Right Angle Assembly 120" Roadside (LH) for Whiting Roll-Up doors

SPECS: Length: 120" Fits door sizes: 101" - 114" high
Assembly includes: Right angle mounting track Vertical track and Torsion bracket
Cross Reference: W #2275-2
Galvanized steel 14 gauge construction
Tongue and groove for proper alignment at joints

28-02101

Truck Door 2" Vertical Track and Right Angle Assembly 106.5" Roadside (LH) for Whiting Roll-Up Doors

SPECS: Length: 106.5" Fits door sizes: 91" - 100" high
Assembly includes: Right angle mounting track Vertical track and Torsion bracket
Cross Reference: W #2275-2
Galvanized steel 14 gauge construction
Tongue and groove for proper alignment at joints

28-02090

Truck Door 2" Vert. Track and Right Angle Assembly 96.5" Roadside (LH) for Whiting Roll-Up Doors

SPECS: Length: 96.5" Fits door sizes: 72" - 90" high
Assembly includes: Right angle mounting track Vertical track and Torsion bracket
Cross Reference: W #2275-2
Galvanized steel 14 gauge construction
Tongue and groove for proper alignment at joints