Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home Your Search Bottom
BELT-GEAR

Skylink Belt Gear for EQ Operators 210131 ***NLA

  • New model # 210131 no cover is needed
  • Metal Gear
110550

Allstar MVP 3 Channel 24V 3 Terminal 4 Wire Receiver 318 MHz *** NLA

  • 3 channels 4-wire 3-terminal operator connection
  • Wire antenna included
  • Compatible with Allstar Classic Allistar and Pulsar dipswitch transmitters and MVP quik-code transmitters
  • Power: 24 VAC/VDC
  • Codes: 19683
  • RF frequency: 318 MHz
    • .......more details
Programming instructions
ALUM-523

Aluminum 24" x 100' Spool Slate / Charbon # 523

  • 20% thicker than the aluminum sold in retail stores (0.022" )
  • Gentek # 523
  • Reverse side is #431 Bright White
Colour chart
XT2564-CUT

Xcluder Rodent Block 4" Black Sold per Foot

  • For commercial and residential applications
  • Creates a tough barrier that is virtually impenetrable to rodents
Sell Sheet
745266

Strobe Low Profile Amber LED Warning Light 12-24VDC

  • Fully encapsulated electronic circuitry ensures a lifetime of trouble-free operation.
  • Installer can select the flash pattern of each high intensity strobe by wiring the unit according to the flash rate preferred.
  • 4 7/8" X 5 7/8" Rubber base Surface mount 12-24VDC
ST-ACTIVATOR

Soft Touch Activator

  • Same as ST-PRIMER
  • Used to make the glue dry faster
  • Approx 10 ounces 300ML spray can
BMBOX-HARDWARE

Complete Hardware Box for Big-Metro BMBOX

  • Foundation box for Big-Metro gate operator
  • Kit includes: (1) #60 – PMD1025.4610 – MECHANICAL STOP BOLT NUT (1) #62 – V12X30.5102 – BOLT MECHANICAL STOP (1) #63 – D12B/5110 – NUT MECHANICAL STOP (1) #61 – D18.5110 – NUT M18 (1) #52 - 5PMCS1.4630 – BALL BEARING (1) #58 – PPD2288.4540 – NYLON HINGE COVER (2) #65 – 16X1.5124 – SCREW FOR LID COVER (4) #64 – D.12.5110 – NUT M12 LOCK NYLON
R5996

Shaft Collar 1" Split Black Oxide

D6375-164

Cable Drum High Lift 164" 1" Bore Torque Force Pair

  • Maximum hi-lift: 164"
  • Capacity: 800 lbs per drum
  • Cable length: Floor to shaft center 181" minus amount of Hi-Lift
  • Cross reference: DNS 410-164 OMI 164HL M162-4165
K20-1050B-2LP

LiftMaster Electric Motor 1/2 HP 115/230V 1Ph L3 L4

  • Standard 1/2 hp motor
HSC-1000

Hand Swager 1/4" & 5/16"

  • Swages 1/4" and 5/16"
  • Made in Japan
DGPROX

Erone 1-Door Stand Alone Card Reader / Keypad

  • 500 users (proximity badges and/or codes)
  • 3 operating modes: - Mode 0: badge and code - Mode 1: badge only - Mode 2: badge or code
  • Audible & Visual feedback
  • 1 request-to-exit input
  • Tamper switch
  • 1 form C door relay output (3A/125V)
    • .......more details
Programming InstructionsInstructions de programmationSell SheetWireless System Chart
MWTA12

Miller Edge Transmitter with Audible Alarm Small *** No Longer Available

  • The MWTA12 safety edge transmitter is designed to provide wireless signal transmission form the safety edge to the motor controls.
  • It is easily mounted and wired to the gate or door edge sensor. When the sensing edge comes into contact with an obstruction a closed circuit signal is created and is sent to the transmitter.
  • The transmitter relays the information to the receiver and the receiver passes the signal along to the operator motor.
  • The gate or door stops movement and will then reverse the direction of travel.
  • Comes with an Audible Alarm feature that activates when the battery is running low and needs to be replaced.
  • Comes standard with a NEMA 4 weather-proof enclosure. The enclosure can be easily mounted with the four mounting holes and screws provided.
    • .......more details
Installation ManualSell Sheet
4J

Rolling Steel 3" Curved Cast Endlock

  • Endlocks are riveted to curtain slats ends of every other slat to prevent slats from shifting laterally and to prevent curtain wear in guides.
  • Continuous endlocks are both ends of every slat.
  • Rivets included with endlocks
41C5141-2

LiftMaster Trolley Assembly Belt Drive

  • For retail model
  • For belt drive
SPREADER003

Chain Tensioner for 1-1/4" / 1-1/4"

  • Chain spreader for installation with 1-1/4" operator shaft and 1-1/4" door shaft
  • Designed to keep tension on the chain when used with a wall mount commercial operator. It helps avoid premature wear on the door shaft bearing and commercial operator output shaft bearing
Installation instructions
Z9200

Cable Snubbers Sold as a Pair

  • Prevents slack from forming in cables
  • Sold in pairs
Installation Instructions
AK-21

Linear Interior Digital Keypad***to extent of inventory

  • The keypad is housed in a rugged plastic enclosure and is designed to be mounted in a standard single-gang electrical box. The die-cast keys have bright easy-to-read yellow graphics.
  • It is supplied with four different plastic snap-on mounting bezels to customize the look of the keypad. The satin-chrome bezel comes factory installed on the keypad. The white ivory & bronze bezels are packaged separately.
  • Up to 480 entry codes from 1 to 6 digits in length can be programmed. They can activate either or both of the relay outputs.
  • Relay #1 has a 5 Amp capacity. Relay #2 has a 1 Amp capacity. The relays can be set for timed or latch-on/latch-off toggle operation per each individual entry code.
  • The on or off toggle state of a relay is maintained even after power interruption. When power is restored to the keypad each relay will assume the state it was in when power was removed.
Installation Manual
SSZP10-6

Solid Shaft 1" Keyed Zinc Plated 10'-6"

CAR2U-RPTR

LiftMaster Lear CAR2U Repeater *** No Longer Available

  • The Lear Car2U® repeater kit allows compatibility between new Chamberlain® Sears Craftsman® or LiftMaster® Garage Door Openers and the Car2U system in your vehicle. · The Car2U system is a garage door opener integrated into your vehicle. · The Lear Car2U kit contains a transmitter and a detailed instruction manual.
Programming Instructions
MT22-BLACK-RH

Miller Edge 2-Wire Pressure Sensitive Edge Sold per Foot

  • Electromechanical small profile edge for rolling steel foor applicaton. •Touch sensitive signaling allows for immediate stopping or reversing of motion. •The MT22 is completely flexible and will contour to curved surfaces. The MT22 also acts as weatherstrip. •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •2 wire NO configuration •Horizontal mount •ANSI/UL325 recognized component •One year warranty
Installation ManualWorksheetSell Sheet
K72-10047

LiftMaster Limit Shaft Kit T APT SD & GH 1/2 HP - 2 HP models L5

  • For models T APT SD & GH 1/2 HP - 2 HP models L5
S2TR2641E2M

Erone 2-Channel Master Transmitter 433MHz

  • One master transmitter is required for each multi-user receiver for doing the programming.
  • Range in open space: 850ft or 250 m
  • One 12V lithium battery included
  • Bronze body with yellow buttons.
Sell SheetBrochureWireless System Chart
RPEN4-RFLCTR

LiftMaster Reflector with Support Housing

  • Replacement reflector for the CPS-RPEN4 photo-eyes
SG10B-24RG-LED

TriLite Stop & Go Traffic Signal 24V LED Black Housing

  • Red and Green LED traffic light
  • Approx. size: 11-1/2" High x 6-1/2" Wide x 4" Deep
  • 24 volt DC input voltage only
  • Long lasting low power consumption
  • A simple reliable and cost-effective way to reduce accidents around the loading dock.
  • Available in two colors: safety yellow or black.
    • .......more details
Installation InstructionsInstructions d'installationWiring DiagramSchéma de connexion
36179R

Genie Traveler Assembly for Screw Drive

  • Fits model 3060 L/M
  • Replaces: 25589R 25589S 25589C 20414R 34107R 20073R & 24357R
GRD-2

Linear 2-Channel Delta3 Gate Receiver 310 MHz (DNR00102)

  • Auto voltage sensing - no jumpers to set
  • Two Form ”A” (normally open) relays rated at 30 Volts AC/DC up to 5 Amps
  • Supplied with whip antenna three feet of coaxial cable and bulkhead connector
  • Power: 12 - 30 VAC or 10.5 - 30 VDC
  • Codes: 128 (set by dip switches)
  • RF frequency: 310 MHz
    • .......more details
Programming Instructions
MDR-2

Linear 2-Channel MegaCode Receiver 318 MHz *** Discontinued

  • Activates two devices
  • Wire lead antenna
  • Mounting bracket supplied
  • Memory: storage for up to 10 MegaCode transmitters
  • Power: 24 VAC/VDC
  • Codes: 1000000+ (MegaCode format)
    • .......more details
Programming Instructions
309013

Linear 1-Channel Multi-Code Receiver 310 MHz

  • Three tabs for universal mounting
  • One N/O relay
  • Compatible with 310 MHz Stanley and Multi-Code transmitters only.
  • Operates on 24 VAC power
  • One channel
  • Codes: 1024 (set by dip switches)
    • .......more details
Programming Instructions
ER100

Carlo Gavazzi Reflector 4" (100mm) Square

  • High quality reflector for retro-reflective photoelectric switches
  • Dimensions: 100 mm x 100 mm 9.2 mm thick
ME123-YELLOW-LH

Miller Edge Yellow Left Hand Outlet 2-Wire 2" wide x 1-1/2" high Sold by the Foot

  • Electromechanical slide in edge for sectional doors and sliding gates.
  • Touch sensitive singaling allows for immediate stopping and reversing of motion
  • Temperature range: -30F to 155F
  • Lead wire: 22 gauge universal
  • Sensitivity: nominal 6-8 PSI
  • 2 wire NO configuration
    • .......more details
Installation ManualWorksheetSell Sheet
13-10024

LiftMaster Limit Nut

  • Limit nut / cam for commercial door and gate operators
CABLE-15

Manaras 15ft coax cable extension with BNC connectors

  • Used on Radio-15 to extend antenna
RADIO-29

Manaras Commercial Receiver Antenna

  • Commercial receiver coaxil antenna
DT2A

Linear 2-btn Delta3 Transmitter 310 MHz (DNT00017A)

  • Activates two Delta-3 receivers independently
  • Test/operate LED
  • Visor mounting clip supplied
  • Power: 9-volt battery
  • Codes: 256 (set by dip switches)
  • RF frequency: 310 MHz
    • .......more details
Programming Instructions
4007-6FT

Aluminum Retainer only for Light Brush 90 degree***Actual Length 6'1"

  • For angle application (90 degree).
  • For use with Light Brush or Vinyl Insert.
4006-6FT

Aluminum Retainer only for Light Brush 6' Long 45 degree

  • For angle application (45 degree)
  • For use with Light Brush or Vinyl Insert.
1003-1-5/8-16'

Aluminum Bottom Retainer L-Shaped

  • For 1-5/8" thick doors.
27-20301

Truck Door Cable Drum Curbside (RH) for Todco Roll-Up Doors

  • Cast aluminum construction
  • Large die cast cable drums are grooved to prevent cables from binding or wearing prematurely.
  • Angle of cable slot determines left or right drum.
  • Holds up to 130" door cable
  • Cross Reference: T #59033-1 T #59129-1 W #4013 330100
26-40402

Truck Door Reefer Side Seal 98" Long for Whiting Coldsaver

  • Co-extruded using PVC backing with flexible PVC seal against the door.
  • Cross Reference: W #7470
R5115

Bearing 1" Commercial with Flanged Retainer Football Style

  • 1" Commercial bearing pressed in a Flanged Retainer Football Style
  • Type: Steel Bore: 1"
  • Inner Race Offest: 13/64"
  • Rated Load Cycles: 250 lb @ 10000 cycles (8')
EP2979

Exhaust Port 3" with latch long barrel

  • For use on insulated door panels up to 2" thick.
  • Inside diameter: 3" Includes fasteners & gaskets.
  • Polished aluminum finish.
RS1034

Roller 3" Steel 4" stem 10 ball

  • Steel Roller Wheel diameter: 3"
  • Working length: 3.38"
  • Overall length: 4.75"
  • Box qty: 50 Box weight: 35.8 lbs (3-4-10 Steel)
25-10103

Truck Door 2" Sealed Roller Steel for Whiting Roll-Up Doors

  • Zinc plated finish 10 roller ball design
  • Shaft Length: 2.62" Overall Length: 3.41"
MP-00001

Micanan Timer to Close 24V Modification

  • 3-button o/c/s function timer will start counting from fully open reverse and reset from any device
  • 24V modifictation available on control circuit ( R) and ( M) and is included with the new full function smart board (E)
25E10220

Truck Door Top Closure Plate & Slide Black E-coat finish for Whiting Roll-Up Doors

  • Steel construction Black E-coat finish
  • Included: Base plate slide bolt & flanged nut
  • Improved heavy-duty reinforced slide
  • Adjusts top panel for firm seal
  • Cross Reference: W #6944
LDM-1

Long Distance Module

  • Compatible with all door and gate operators that use 24V AC
  • 20 mile range
UCFL-1-1/4

Self-Aligning Cast Flange Bearing Football Style 1-1/4" Bore UCFL207-20

  • Grey cast iron painted.
  • Comes with 2x set-screws
  • Football style 2 bolt
  • 5-1/8" hole center to hole center distance
  • 3500 lbs load rating
MA200

LiftMaster K1 Relay option for MA MAT and MAST Barrier Gate Operators

  • used with Mega Arm Barrier gate operators to control traffic lights etc
MB-01204

Micanan Electric Motor Only 1/2HP 575V 3PH

  • C-Flange motor fits: GT GH GHC GSD
1222_DUAL_TROLLEY_14'

LiftMaster Dual Trolley kit for 14' high door includes #41 Chain for 14ft High Door Angle tracks (2x) 14' (Actual length 227") and (1x) shaft

  • Provides a second drawbar-type operation on wide standard door
  • Includes 14ft tracks #41 chain hardware & Round Bar 1" x 20'
  • Works with TDC12 & TDC22 Maxum operators
D-TEK-LP

EMX Industries Low Voltage 11-Pin Single Channel - Dual Relay Loop Detector (2500-1)

  • Power Supply: 12-24 Volts AC/DC
  • Current Consumption: < 9 mA
  • Operating Temp: -40°F to 180°F
  • Surge Protection: Zener Diode /MOV
  • Output Relays (2): 1Amp 30 VDC
  • Loop Input: Transformer isolation lightning and transient protection (1)
    • .......more details
Manual - LP-D-TEKSpec Sheet - LP-D-TEK
29201

Doorlec Transformer 460V pr 120V sec 35VA

  • 460V prImary 120V secondary 35VA
TDC7-8

Liftmaster Comm. 8FT Trolley Angle set (10-5808-P x 2) and #48 chain pack (TDC48-08) ***Actual length 131*

  • Double Angle Rails for doors up to 8'6" high
  • Includes #48 chain pack
XF208VAC12

LiftMaster 208V Transformer Kit 1200

P-8833T-OCS

Pulsar 3-btn 1-Door O/C/S Transmitter 109372-Compatible 318 MHz

  • Open/Close/Stop remote for 1 door
  • Compatible with 3-channel Allstar and MVP receivers
  • Portable transmitter
  • Easy access to battery and coding switch
  • Power: 9-volt battery
  • Codes: 6561 (set by eight trinary dip switches)
    • .......more details
19-50106MN

Chain # 50x106 (5-1/2') with Master Link Nickel Plated

  • Also known as: K19-50106MN 199023NP
  • Complete kit includes: #50x106 Chain master link and clip.
CCTD-04

Fuse 600VAC/300VDC Class CC Time Delay 4AMP Sold per Fuse

  • Sold per fuse
7-6088

RW Hanger 321 For use with #31 Track

689-LCN

LCN Door Closer 4040-XP Aluminum Finish

  • Cast iron cylinder with full-complement bearing
  • 3/4" diameter piston
  • Double-heat treated steel pinion journal
  • All-weather Liquid X fluid
  • LCN Patented Green Dial spring force indicator
  • Universal non-handed
    • .......more details
5415-2

EMX RAVEN Dual Relay Microwave Motion Sensor

  • Distinguish between vehicles and pedestrians
  • Two configurable relay outputs
  • Adjustable sensitivity and cross traffic suppression
  • 8-23 ft (2.5-7 m) mounting height
  • Optional remote control for easy programming
LA412DC

LiftMaster replacement 12VDC Solar Actuator Arm

  • he LA412 Arm runs on 12V and connot be subbed for LA400 Arm
CP-LX900

Lynx Control Board with Cover for MDJ models

  • works only on MDJ (medium -Duty Jackshaft) models
  • UL325 compliant with B2 C2 modes
  • includes on-board Timer-To-Close
  • On-Board 372MHz radio receiver accepts 20 remotes
MDJ Installation manual
LRS-LC

EMX Logic Controller

  • For use with the Loop Replacement System (LRS-C1) Magnetoresistive Vehicle Detector Control Unit
  • Connects two stand-alone sensors to expand the detection area
  • Works with LRS-DB (LRS-DB-50 or LRS-DB-100) Direct Burial or LRS-FP Flat Pack (LRS-FP-50 or LRS-FP-100)
  • Logic Interface allows one (1) or two (2) sensors to be connected to one (1) output
  • Provides six (6) selectable logic functions and two (2) separate relay outputs
  • A/B directional logic can be selected with an output for each direction of travel as a vehicle passes over two sensors
    • .......more details
OE-LHR-SET

Low Headroom Quick Close Device 2" track Sold as a Pair

  • Includes 1 RH & 1 LH bracket
  • Steel with zinc plated finish
  • Set includes: 1 x fastener bag 1 x stop lip bracket (L&R) 1 x LHR roller holder (L&R) and instructions
  • Used on torsion or extension spring doors up to 8'H
  • Operate extension spring doors in a minimum of 7" of headroom
  • Door won't go higher than top of spring shaft when door is opened.
    • .......more details
Installation diagram page 1Installation diagram page 2
MOD007

Manaras Reverse Limits

  • Necessary feature when the opening and closing of the door corresponds to a different rotational direction than the operator
BEA-10-PSMDR2024

BEA Power Supply 100 - 240 VAC 24 VDC Output

02-101

LiftMaster Single Button Nema-1 Pushbutton Control Station

  • Surface mount
5009-559-PAINT

Aluminum Touch Up Paint Nail Polish Style Pebble / Kaki # 559

  • Glass bottle and brush applicator
PIN007

Manaras Slotted Spring Pin 3/16" x 1-1/2"

19-40240D

LiftMaster Drive Chain #40 10' Box Black Oxide

  • Complete kit includes: Drive Chain 10' (#40) and (2) Master Link Kits
  • Black Oxide coating provides corrosion resistance
  • Suitable for use exterior applications
.177_2"-RH

Torsion Spring .177 x 2" x 12ft RH Gold

  • Wire size: .177
  • Inside diameter: 2"
  • Length: 12 ft
RADIO-EM102

Manaras Mini 3-btn Rolling Code transmitter 390 MHz

  • Field Configurable
  • Hand Held or Keychain three button
  • Rolling Code Technology
  • 1 Door (SD) Open/Close/Stop or Multiple Doors (MD) 1-3 single-button field selectable
  • Config. Trad. Comm. Sesquence or Alternating Sequence (SBC) Open/Close/Stop (with ECB)
  • Nema 1
    • .......more details
Manual
ETBHW-311-3/4HP

Doorlec 3/4 HP 115V-1Ph Waterproof Trolley OP

  • Trolley Industrial type operator with DC2000 Logic controller
  • Watertight/Dust tight
EHJW-311-1/2

Doorlec Ind Jackshaft Op. Watertight ECB 1/2 HP 115V-1Ph

  • Heavy-Duty Industrial Operator with Waterproof Mod. for Sectional or Rolling Steel Doors
  • DC-2000 logic with adjustable Timer-To-Close Delay On Reverse and Traffic Light Control (monitored board optional)
  • Solenoid Brake prevents coasting and secures the door when closed
  • TEFC (sealed) continuous duty electric motor with overload protection
  • Automatic Friction Clutch protects the door and operator
  • Self-aligning Heavy Duty sealed Pillow Block bearings on all shafts for high cycle applications
    • .......more details
2000Z

LiftMaster HD Roller Cage Bearing Hinge Flat Mount Both Sides Prime Coated Sold in Pairs

  • Heavy Duty Construction for Maximum Durability
  • Dependable Roller Cage Bearing Design
  • Even Weight Distribution
  • Five Times The Weight-Bearing Surface of the Nearest Large Hinge
  • Largest Weld Surface in the Industry
  • Easy to Fully Lubricate
    • .......more details
22253

Doorlec Flush Mount Key Switch O/C Tamperproof

  • Flush mount momentary-contact spring return key switch OPEN/CLOSE in TAMPER PROOF EEMAC 1 enclosure with gasketed aluminium cover.
  • Key removable at centre only.
  • Can open or close door.
  • Recommended applications: laboratories schools hospitals food processing plants or any other area where sanitary and high security condition are important.
SL595103UL

LiftMaster Dual Voltage Slide Gate Op.1 HP 208/230/460V 3 Phase - Heater NOT Incl. UL325 ***NLA

  • UL 325 compliant system.
  • Power: 208/230/460/575 VAC. 3 Phase.
  • Accessory power: 24VAC 500mA max.
  • Monitored safety inputs: 3 Main Board 3 Expansion Board.
  • Temperature specs: Without Heater: -4°F (-20°C) to 140°F (60°C). With optional heater (HTRNB: HTR460 for 460V operators): -40°F (-40°C) to 140°F (60°C)
  • Gate travel speed: 12 in. per second.
    • .......more details
31110

Doorlec Sprocket 50B23 1" Bore KW/SS

74183

Marantec External Gate Receiver 315 MHz

  • Upgrade your existing gate operator to be compatible with Marantec controls such as transmitters and keyless entry systems.
  • 315 MHz operating frequency
  • HomeLink compatible
  • Very easy installation (follow wiring diagram of gate operator)
  • Compatible with other operator brands
  • Made in Germany
    • .......more details
65-5209

LiftMaster Manual Hoist Mod. Kit #48 Chain Drive

  • This is an available factory installed modification only
RN1124-10

Roller 2" Nylon 4" stem 11 ball White 10/PKG Sold per Pack

  • White Nylon Roller Wheel Diameter: 2"
  • Working Length: 3.75" Overall Length: 4.69"
  • Box qty: 15 packs of 10 Box weight: 49 lbs (2-4-11 White Nylon)
1004-134-8'

Aluminum Bottom Retainer 1 3/4" U-Shape with Reinforcement 8 ft**Actual Length 8'2"***

  • For door thickness 1-3/4"
TRANSF112

Manaras Transformer 575V-24V-50VA

C9/90-KIT

Felco C9 Parts Kit Only

  • Parts kit only
  • Kit consists of main bolt nut counter nut and washer.
PPV3M

LiftMaster Passport MAX 3-Button Visor Remote

  • Provides total control with one remote for gated communities and commercial properties.
  • Compatible with the PPWR Receiver for gate access control all 315MHz Security+ LiftMaster and Elite Series Gate Openers and all LiftMaster Garage Door Openers manufactured since January 1995
  • 2x the range of standard remote controls
  • Narrow-band transmission on 3 simultaneous frequencies (310 MHz 315 MHz 390 MHz)
RBH103L5-LH

LiftMaster 1 HP 208/230/460 VAC 3 PH Comm. Hoist Op. Logic 5 Left Hand

  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door.
  • With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
  • Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.
    • .......more details
BD3240

Piezo Warning Buzzer Alarm with Volume Control 24VAC/DC

  • 2-1/2" long 90 DBA
10-1036-4

Whiting 2" Nylon Roller 5" Stainless Steel Shaft for Truck Doors

  • A Whiting original part
  • Stainless steel bearings stainless steel shaft
MA003

LiftMaster Electric Motor Only 1/2 Hp 24VDC BM

  • Same as: MA003M MA-003 MS003 20-60000-1
  • Used on Liftmaster Mega Arm gate operators
25-10109

Truck Door 1" Steel Roller 5" Shaft Length for Todco Roll-Up Doors ** NLA

  • Zinc plated Hardened shaft and raceways
  • Seven roller ball design
SD755L5-RH

LiftMaster Heavy-Duty Slide Door Operator 3/4HP 575V 3PH Right Hand (Must include hardware box)

  • Perfect for split and sliding doors involved with industrial applications.
  • It is installed above the door and corresponds with the direction the door will be traveling.
  • Comes equipped with an emergency disconnect and for manual lifting in an emergency and automatic reconnect.
  • The new logic 5 commercial operators come with MyQ Technology built in. * 828LM required
  • Built In Security+ 2.0 radio receiver
  • Solenoid brake included
    • .......more details
Installation manualManuel d'installationSell sheetBrochure
PRO-HHD-7511E-L

Micanan 3/4HP 115V 1P Heavy-Duty Jackshaft NM ECB No Eyes Left Hand

  • 3/4 HP115V 1PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
  • Non-Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
  • 3-btn O/S/C (02-103) wall control station included
  • Adjustable Friction Clutch 5L320 drive belt
  • #50 Roller chain 18 tooth door sprocket included
  • Emergency chain hoist with electrical cut-off for manual operation
    • .......more details
Installation manualSpecification sheet
HAE00061

Linear LDCO Control Board BBU Compatible *** USE HAE00077 instead

  • DC motors
8X118-WHITE

Fasteners Wood Screws painted White 1000/Box

  • Ideal for residential weatherstrip
ALUM-508

Aluminum 24" x 100' Spool Sandalwood / Sable # 508

  • 20% thicker than the aluminum sold in retail stores (0.022" )
  • Gentek # 508
  • Reverse side is #431 Bright White
Colour chart
.319-6-RH

Cut-to-Length Torsion Spring .319 x 6" Right Hand Blue/Green

  • Spring wire only. Cones and Filler extra
PMR10RIT

Carlo Gavazzi Retro-Reflective Sensor with Imperial Connector

  • PMR series sensors have a sensing range up to 32.81 feet and a fixed sensitivity.
  • Immune to ambient light Selectable output function.
  • The plastic housing is IP 67 rated and allows cable or screw terminal connections.
  • Optional timing features include: Delay on operate delay on release or one shot (triggered on leading or trailing edge).
  • 24-240 VAC or 12~240 VDC
  • Relay Output
    • .......more details
T-832-M-H

FL-Heddolf 2-btn Mini Transmitter P219-2K-311 MHz (T-832-M-S)

  • Open/Close mini remote for 2 doors
  • Keychain and 12V battery included
  • Compatible with Keystone T-832-H and old Allstar T-832
  • 8 dip switch
  • Same as P219-2K
Manual
PS243F

Adjustable DC Power Supply 6V/12/24V 3 AMP

  • 3 preset output voltages : 6/12 and 24VDC (an adjustable mode is also available with a jumper setting)
  • Full adjustment from 2 to 24VDC if required
  • Maximum 3 amp (Output at 70 deg. F and free air)
  • Regulation:97.5%
  • Maximum input voltage 36 volts
  • Fuse protected
    • .......more details
Wiring Diagram / Diagramme de raccordementSpecifications / Spécifications