Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home Your Search Carwash
1702LMC

LiftMaster Quick Release Lock

  • For all vault-type garages
  • For exterior manual operation
  • 6ft industrial-strength connecting cable
  • Non-corrosive stainless steel faceplate and spur washer
  • Extension sleeve for doors up to 2" thick
  • Positive connection between cable and trolley release
  • Includes 2 keys
1702LMC Manual
EXT-HDWR-BOX-7/8

Installation Box for Extension Springs for 7' & 8' Doors

  • Installation Hardware includes 3" sheaves sheave strap cables safety cable fasteners
MOD065B

Manaras Trolley Hoist #41 Brake Release Kit Includes 12' Shaft

  • Chain hoist for manual hand operation of standard lift doors equipped with trolley operators.
  • The 1" cross-header shaft (12' long) drives the front idler of the drawbar
  • For use with operators with #41 chain
  • When applicable it incorporates an electric cut-out and brake release cable
  • Hand chain for 14' high door is standard
  • Hoist assembly width is only 8.5"
    • .......more details
MM00139

Micanan N-4 Cable Entry Tube GH/GHC Metal

  • New tubes are plastic
LA400-JB40

LiftMaster Junction Box w/Cable 40'

MV-00262

Micanan Coax Cable Kit 12'

26CW14225-CUT

Truck Door Bottom Panel with Hardware (15" x Cut-To-Size) Painted White for Todco Dryfreight

  • These panels are cut to an extra wide width to fit wider vehicle applications.
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • These panels are routed and shipped without holes.
  • 3/4" thick 7 ply exterior grade medium density plywood.
  • Painted white
  • Comes with 18" pull strap assembly two bottom fixtures standard lift handle two cable anchor brackets seal and retainer.
    • .......more details
37502

Doorlec DC-2000 Electronic Circuit Board for Constant Pressure Close *** Discontinued Use 37520

  • Works in all Doorlec model openers except R-99
  • Input power to board is 120V
  • 24V DC available on terminals 9 & 11
  • Accessory power on terminals 1 & 11
  • Programmed to work with constant pressure to close
41A3504-1

LiftMaster Antenna Kit with Adapter

  • Designed to work with the 433MHz receiver logic boards
  • Kit contains: Antenna Coaxial cable adapter and antenna bracket
K-MALED-HDWCB

LiftMaster LED Barrier Arm Hardware Kit

  • Service kit to connect new LED arm to existing barrier gate
  • Includes bolts 3" (2) nylon nuts (2) washers (2) 1/2" watertight connector 48" extension cable for breakaway connector "Y" cable and 12 Vdc power supply
7001-8-W/B

Commercial Side & Top Weather-Strip 8' Long - White and Black (WB)

  • White galvanized steel with black dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
  • Full case quantity only (20)
LA500DCS

LiftMaster Secondary 24VDC Actuator Arm for Dual Swing Gate Applications New Model

  • Includes 40ft cable and junction box
Installation ManualManuel d'installationSell Sheet
2598

Aluminum 5/16" Cable Eyelet

  • For use on Whiting dry freight and refer doors
  • Use with 1/8" stainless or galvanized cable
TUBE_SHAFT_17FT

Hollow Shaft 1" x 17-0" Galvanized 16 gauge

OSHW-6532-M-N1-LH

Manaras Opera-SH with Carwash mod 1/2HP 600V 3Ph Monitored w/ N1 Eyes Left Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation brake and a floor level engaging device
  • Clearence: side room required 16"
OSHW-6532-M-N1-RH

Manaras Opera-SH with Carwash mod 1/2HP 600V 3Ph Monitored w/ N1 Eyes Right Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation brake and a floor level engaging device
  • Clearence: side room required 16"
ALUM-577

Aluminum 24" x 100' Spool Sierra XL # 577

  • 20% thicker than the aluminum sold in retail stores (0.022" )
  • Gentek # 577
  • Reverse side is #431 Bright White
OTBHW-6113-M-N1

Manaras Trolley Operator w/Carwash Mod 3/4HP 120V 1Ph Monitored w/N1 Eyes

  • Heavy-duty low headroom trolley operator designed for use on industrial standard lift sectional door
  • 25 cycles per hour 80 cycles per day
  • It incorporates a drum-band type solenoid brake.
  • Tracks are an extra 36 lbs per track
  • 3/4 HP & 1 HP operators come with #41 full roller chain
  • Includes PHOTO-070
    • .......more details
20-511

Truck Door IN2 Insulated Panel 2.125" (Panel only)

  • A replacement insulated truck door panel ** By quote Only
PDC300-34-1-40-20-CH

Pulse300 Direct Drive Opener 3/4 HP 110/240V 1ph 1" Shaft 40:1 20' Cable ** Price by Quote Only

  • Advanced speed control: up to 24"/s opening up to 16"/s closing
  • Built-in 24V 9Ah battery backup
  • Soft start/stop functionality
  • Universal single-phase power compatibility: 110-240V 50/60Hz
  • Adjustable force monitoring
  • Programmable closing timer: 1-99s A high-performance direct-drive door operator with a 90V DC horsepowerrated motor engineered for balanced commercial and industrial doors
    • .......more details
PDC-300-050-1-40/50-20

Pulse 300 Direct Drive Opener1/2 HP 1" Shaft 110/240V 1ph 40:1 20' Cable

  • Advanced speed control: up to 24"/s opening up to 16"/s closing
  • Built-in 24V 9Ah battery backup
  • Soft start/stop functionality
  • Universal single-phase power compatibility: 110-240V 50/60Hz
  • Adjustable force monitoring
  • Programmable closing timer: 1-99s A high-performance direct-drive door operator with a 90V DC horsepowerrated motor engineered for balanced commercial and industrial doors
    • .......more details
L993S

LiftMaster 3-btn Standard Visor Remote Control Sec+ 3.0

  • Compatible with LiftMaster® Security+ 3.0™ garage door openers.
  • Up to 1300 ft. range (conditions permitting).
  • New and improved seamless set up.
  • Control up to three Security+ 3.0 garage door openers
  • NEW! Set up and manage your remote in the myQ app for a more personalized experience.
  • Ultra-secure encryption.
    • .......more details
Installation ManualManual-InstallationCompatibility Chart 2025Comparison Chart 2025
C12

Felco C9 Cable Cutter 3/8" Capacity

  • The FELCO C12 a two-hand wire and cable cutter designed for precision.
  • Made with unbreakable forged aluminum handles and high-quality hardened steel blades
  • The triangular cutting system allows for clean cuts without crushing the cable while the ergonomic design provides comfort and efficiency.
  • Length: 19.69 in
  • Weight: 3.75 lb
  • Cutting diameter: 0.47 in
    • .......more details
RGL-CTL

LiftMaster Compact Red/Green Traffic Light 12-24V LED

  • The LiftMaster Hi-Intensity Red/Green LED Traffic Light is designed for use in both indoor and outdoor applications where signaling and traffic control are required.
  • The Traffic Light puts out hi-intensity red and green beams that are well suited to areas that require a controlled field of view for narrow lane signaling and daylight visibility.
  • The Traffic Light is compatible with Logic 3/4/5.0 operators that can accommodate the TLS1CARD and RDGRNCARD
  • Supply Voltage And Current: 15-30 volts DC preferred AC acceptable
  • Connections: Integral 4-Pin Connector with pig tail
  • Operating Temperatures: -40° to +50° C (-40° to +122° F)
    • .......more details
K41-0156-000

LiftMaster Cable Tension Monitor Left Side

  • For use with various LiftMaster® MAXUM Series DC 700 lbs. to 2200 lbs. Standard-Duty and Extended-Duty Jackshaft Jackshaft Hoist and Trolley Commercial Door Operators
  • This service kit is compatible with the following MAXUM models: JDC JHDC and TDC.
  • NOTE: Refer to K41-0157-000 for Right-Side Cable Tension Monitor
HSLG-411

Linear Commercial Slide Gate Operator 3/4 HP 115V 1 Ph - Heater not Included

  • Great for industrial and commercial applications
  • Features the APeX control board
  • Emergency manual disconnect handle
  • Powder coat finish
  • Post mount standard; pad mount optional
  • Integral entrapment sensing system with dual multi-turn precision potentiometers for accurate adjustment and enhanced safety
    • .......more details
7-37-11

Barlock Bars and Center Only for 10ft Wide Door No Hardware Bag

  • Includes center and bars (61-1/2") only
  • DOES NOT include the hardware bag
39902R

Genie Wireless Wall Console GWWC-P

  • Completely Wireless Installation – No need to have an additional wired wall console -absolutely no wiring required for operation!
  • Works with all Genie Intellicode® openers since 2013. (Not compatible with Models 1022 1024 1042 2022 2024 2027 2042.)
  • Large buttons and attractive blue LED light makes the console easy to see in the dark.
  • The pulsating light has two optional speeds or can be turned off for maximum battery life.
  • Backlighting will turn red to notify the user of low battery.
  • Turn only the garage door opener light itself on at any time for steady light in the garage.
    • .......more details
NIR-50-325-KIT

EMX Retro Reflective Photoeye Kit UL325 NC/10K Across NO Contact EMX-5255-K

  • Kit includes photoeye with hood reflector with hood and mounting bracket
  • Retroreflective configuration
  • NC and 10K monitoring
  • 50 ft. operating range
  • Sensitivity adjustment
  • Wide range operating voltage
    • .......more details
Installation Manual Specification Sheet
50-CP4

LiftMaster Sensing Probe Free Exit 100ft Lead

  • Self-contained free exit system designed to detect moving vehicle and open your automatic gate.
  • Can be installed above or below ground
  • Connects directly to any gate operator without an external output board.
  • Works with powered or solar gates.
  • SPECIFICATIONS: Cable Lead Length: 100 ft.
  • Power Requirements: 8-24 VAC oe 8-30 CSX
    • .......more details
Installation Manual
EXA-1000

Linear Omni-Directional Remote Antenna (AAE00198)

  • The EXA-1000 is a 1/2 wave center fed vertical antenna composed of three parts: an Antenna assembly with an F connector attachment; a Base Plate assembly with radial mounting provisions; and a five-foot 75-ohm coaxial cable.
  • The cable connects to the antenna base on one end and the receivers F connector on the other.
  • If the antenna must be mounted further than five feet from the receiver an extension cable of up to a maximum of 25 feet may be used instead of the five foot cable supplied.
  • Because of the cable resistance the performance of the EXA-1000 may be degraded by using longer than a 25 foot cable
  • Compatible with all Linear receivers with Type F antenna connector
  • Receives signals in 288 to 320 MHz range
    • .......more details
Installation manual
OWL

EMX Microwave Motion & Infrared Presence Sensor

  • The OWL is a vehicle motion and presence sensor that uses microwave and infrared technology to activate automatic doors and industrial gates.
  • Featuring two configurable outputs vehicle motion detection as well as presence detection the OWL activation sensor will ensure the safety of people and goods.
  • Mounting Height: 11.5-21.3 ft (3.5-6.5 m)
  • Supply Voltage: 12-24 VDC/AC
  • Dimensions: 9” (229 mm) x 5” (127 mm) x 5” (127 mm)
  • Connections: 32 ft (10 m) 8 conductor cable directly from sensor
    • .......more details
ManualSell SheetQuickstart Guide
CC-007

Skylink Chain & Cable Assembly for 7ft Door EQ Model Ops

  • Replacement chain & cable for rail
CPT-223-PER-FT

Miller Edge Bulk Extrusion Sold per Foot

  • For DIY quick fixes to repair or replace sensing edges for sectional and rolling steel doors measuring 1-1/2" to 2" thick with a mounting channel.
  • Sensivity: 15lbs max activation
  • Lead wire 18"-22 gauge unversal
  • Wire configuration: N.O.
  • Electrical interface: sealed module- provides seamless connection to logic or relay type operators
  • ANSI/UL325 recognized component
    • .......more details
VFOH5011

LiftMaster Variable Speed Front of Hood Op. 1/2 HP 120V with CPS-U

  • Front of Hood Mount for Rolling Steel Doors and Grilles.
  • Variable speed up to 12”/sec with smooth start/stop feature.
  • Floor level controls with intuitive menu driven interface.
  • Accepts: (30) 3-Button Remote Controls or (90) 1-Button Remote Controls
  • Accepts an additional 30 Wireless keypads and Unlimited Dip Switch remotes
  • Includes: 1 x Powerhead (with 16.5 ft. Integrated Hoist Chain) 1 x Controller 1 x Powerhead Mounting Bracket with Hardware 1 x VFD Cable (22 ft. Standard) 1 x Encoder Cable (22 ft. Standard) 1 x #50 Drive Chain 1 x 40-Tooth Sprocket 1 x LiftMaster Monitored Entrapment Protection (CPS-U Standard
    • .......more details
24856

Stanley Front Idler Kit for Chain/Cable Openers *** No Longer Available

  • For Stanley Chain/Cable Openers Only
  • Not for Stanley Full Chain Openers
  • Replaces Part #920-0147
41A5807

LiftMaster Chain and Cable Kit 7' Door

  • This is a one piece 7 ft. Chain and Cable Replacement Kit
MF-341-011

Serco Manual Brake Band

  • For use with Serco brand dock levelers
60-6550-A-BLK

Speed Bump Black 36" Econo Light Weight for Asphalt *** No Longer Available

  • A standard speed bump system section includes (2) main pieces (2) endcaps x 5” long and (1) connector clip.
  • Main pieces may be added and connected to form larger units.
  • 36” long x 10.5” wide x 2” high (main piece)
  • EndCap: 5” Safety Snap On End Cap - sloped modular profile prevents tripping by pedestrians.
  • Yellow Plates: Each speed bump section is embedded with (6) yellow safety plates of weather resistant composite material for protection from salt freeze and thaw.
  • Can be used as a cable cover - bottom sides include 1” x 1½” channels for protecting temporary or permanent cables or hoses.
    • .......more details
1371

Whiting Complete Bottom Bracket with Cover

BLSI12

Pivin Drapeau Vertical Lift Barrier 1/3HP 120V 1PH 6.57A/5.65A

  • Specify length of arm required up to 12'
  • Arms made of 1" x 3" rectangular aluminum
  • Has a 150W heating element optional 300W is available
  • Operating temps: -40 degrees C to 50 degrees C
  • 8 seconds opening/closing time
  • # of cycles: 750000
    • .......more details
ERM40600H00

NICE Era MH Tubular Motor 40Nm 14rpm 120/60 12'

  • There must be at least 0.4 m between the driven parts and any xed elements
  • If the cable is damaged the appliance must be scrapped. The power cable cannot be replaced
41A3011

LiftMaster Pulley Only for Cable Pulley Bracket

  • Also known as: 144A12 144B16
E3K-2018

Omron Retro-Reflective Photocell w/Built-In 10K Resistor UL325-2018 *Same as model E3K-R10K4-NR-1

  • Fully complies with UL325-2018 standard for gate ops. that use the 10K resistor method and also the Normally Closed method
  • Easy to wire terminal strip
  • Plug-in replaceable outputs
  • Range: 40ft
  • Power: 24-240V AC/DC
  • The E3K-2018 has a second relay to accommodate traditional dry contact for non-monitored applications.
    • .......more details
Wiring DiagramsSell sheet
40W33A

LiftMaster Solar Kit 24V 33AH for Gate Operator

  • Charges the gate access system battery using solar power
  • Ideal for remote and sunny areas without access to an AC outlet
  • Replaces the need for gate access system transformer
  • Can be mounted to almost any fence gate or post
  • Mounting bracket and hardware included
  • Contains (2) SOLPNL20W12V solar panels
    • .......more details
PRO-H-5023-U-LH

Micanan 1/2HP 230V 3P Hoist Operator N1 Eyes Monitored ECB Left Hand

  • Continuous duty belt drive jackshaft operator with emergency chain hoist
  • Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
  • Nema 1 photoeyes included
  • Solenoid brake OPTIONAL
  • On-Board receiver holds up to 20 transmitters
.421-334-L

Cut-to-Length Torsion Spring .421 x 3-3/4" Left Hand Wound Gold

  • Priced per inch - cones & filler sold seperately
  • For factory installed cones use part no. C-375-INSTALLED
CABLE_364SS-250

Cable 3/64" 7x7 250' Stainless Steel

  • Not for use in aircraft applications
  • Type: T304
MK-00646

Micanan 9" Coax Cable for On-Board Receiver

DB13

Molded Rubber Bumper Black 13" L x 10" W 4" Projection 2-Hole Sold Individually

  • Manufactured from reinforced prime rubber
  • Rectangular horizontal mount
  • Ideal for light traffic loading docks.
  • Perfect protection for in-plant wall protection from forklifts and other material handling vehicles molded bumpers will not warp rust rot or harden.
  • Bumper comes with 2 pre-drilled countersunk mounting holes drilled to accept 3/4" anchor bolts
WD-260600

Wayne Dalton Wired Infrared Safety Sensors (WD-252118)

  • Beam sensor kit for all Wayne Dalton Quantum Classic Drive idrive Doormaster Wizard and Prodrive garage door opener models.
  • Parts no. 260597 260600 same as part numbers 157165 157166 318873 252118
  • Includes: Sensors with wires Mounting brackets Fasteners and Instructions
Installation manual
17314

Doorlec DC-3200R Industrial Receiver EEMAC 1 up to 32 Doors or Gates (Includes Extra Long Antenna PN# 17355)

  • Works with Doorlec 17315 remote control to 32 doors
Wiring instructions
MET-14500C

Cable Tie Metal Tooth 14" 50 LB Black 100/Bag

97-75003

DOT-C2 Reflective Tape 150 ft x 2" W 6" Red x 6" White Pattern

  • DOT-C2 certified exceeds NHTSA requirements
  • Highly reflective even up to a 90 degree angle
  • Quick and easy to apply
100MAPS

LiftMaster External Power Supply 110VAC Input 12VDC 2000mA

  • Provides enough power to operate two LC-36A light curtains.
  • Includes 38' cable leads
1104-7FT-GREY

Residential Side & Top PVC Weather-Strip with cap 7' Long - Grey (G)

  • Grey rigid vinyl retainer with grey flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
DTG

Linear Delta3 Safety Edge Transmitter 310 MHz

  • Activates one Delta-3 receiver for remote stop or reverse safety edge
  • No cables or coiled wires
  • Mounting screws (4) supplied
  • Power: 9-volt battery
  • Codes: 256 (set by dip switches)
  • RF frequency: 310 MHz
    • .......more details
Programming Instructions
306839

Bircher Hercules 2s Microwave Motion Sensor for Industrial Doors

  • Two completely independent programmable outputs for endless application scenarios
  • Highly flexible program settings utilizing both outputs are now easier to program
  • 23' (7 m) long cable for maximum installation flexibility
  • 6-wire cable using traditional wire colors & thicker wire gauge for easier installation
  • Pulse on exit feature
  • Differentiation between pedestrian and vehicle traffic
    • .......more details
Installation ManualSell SheetField Size
50-101-2

Exterior 3-Wire Air Switch SPDT with Plastic Housing Mosley

  • Nema 4
  • 3-wire air switch; 1-NO and 1-NC contact
  • Mosley
  • NO contact on Yellow and Green
27-8004-K

LiftMaster Aux. Contact Block Relay

  • 2-NO/ 2-NC Contacts
  • Used on 03-8024K contactor
2B747

LiftMaster Direct Connect Cable (41B0747)

  • EL25 conecting cable
26CW94325

Truck Door Bottom Panel with Seal (15" x 98") Painted White for Whiting Dryfreight

  • These panels are cut to an extra wide width to fit wider vehicle applications.
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • These panels have no routs and shipped without holes.
  • 3/4" thick 7 ply exterior grade medium density plywood.
  • Painted white
  • Comes only with bottom retainer and seal (installed)
    • .......more details
14-1052

PVC Roll 8" x .080" Low Temp Clear Smooth 300' for Replacement Strip Curtain

  • Clear and smooth. Suitable for most average applications.
  • Temperature Range: -34° C to 65° C).
  • Formulated with ingredients that meet USDA requirements for incidental food contact.
MRGHB-6537-M-N1-LH

Manaras 3 HP 600V 3P Jackshaft Monitored w/N1 Eyes with break Left Hand

  • A very heavy-duty worm gear industrial operator designed for use on large sectional multi-blade and industiral rolling doors and grilles.
  • It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
  • Electrically activated drum-band type solenoid brake
  • Full overload protection
MRGHB-6536-M-N1-RH

Manaras 2 HP 600V 3P Jackshaft Monitored w/N1 Eyes with break Right Hand

  • A very heavy-duty worm gear industrial operator designed for use on large sectional multi-blade and industiral rolling doors and grilles.
  • It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
  • Electrically activated drum-band type solenoid brake
  • Full overload protection
MGH-6435-M-N1-LH

Manaras 1.5 HP 480V 3P Jackshaft Monitored w/N1 Eyes Left Hand

  • A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
  • It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
  • Electrically activated drum-band type solenoid brake
  • Full overload protection
MGH-6113-M-N1-LH

Manaras 3/4 HP 120V 1P Jackshaft Monitored w/N1 Eyes Left Hand

  • A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
  • It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
  • Electrically activated drum-band type solenoid brake
  • Full overload protection
OGH-6433-M-N1-LH

Manaras 3/4 HP 480V 3Ph Gear Head Operator Monitored ECB w/N1 Eyes Left Hand

  • A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
  • Includes a self-engaging chain hoist for manual operation
  • 25 cycles per hour 80 cycles a day
  • Hoist on right side standard can easily be moved to the left in field
  • Full overload protection
  • BRACKET112 must be used for wall mounting
    • .......more details
GK-R

Genie Dual Frequency Wireless Keypad White 42368R

  • Compatible with Genie Intellicode openers manufactured since 1995
  • Transmits dual frequency 315/390MHz
  • Set a temporary PIN for use by others
  • Large durable buttons produce exceptional tactile and audible feedback
  • Loaded with LEDs for bright efficient backlighting
  • Simplified programming for single and multiple door scenarios
    • .......more details
621

NICE Smart Residential DC Garage Door Opener Linear 621 BBU

  • oft start/stop for quiet operation Operator head accepts both belt (HBT) or chain (HCT) Maximum Door Height with Options rails: 8FT Maximum Door Weight: 350 LBS Integrated battery backup Integrated LED lighting (800 Lumens) Opening Speed: 6.5 inches per second (+/- 0.5 in/sec) Compatibility: HomeLink® MegaCode® Can program up to 40 remotes Includes: Nice Illuminated Wall button MTS3 3-Button Remote Megacore Obstacle-sensing safety beams Warranties: Motor & Drive Belt – Lifetime Mechanical Parts – 5 Years; Electrical & Battery – 1 Year
7-6028

RW Bottom Cane Bolt 524 x 3

  • ormed steel bar. Formed heavy steel. Black enamel 1" Dia. x 25" Lg.
PDC-300-075-1.25-40/75-20-CH

Pulse 300 Direct Drive Opener 3/4 HP 1.25" shaft 110/240V 1ph 40:1 20' Cable

  • Advanced speed control: up to 24"/s opening up to 16"/s closing
  • Built-in 24V 9Ah battery backup
  • Soft start/stop functionality
  • Universal single-phase power compatibility: 110-240V 50/60Hz
  • Adjustable force monitoring
  • Programmable closing timer: 1-99s A high-performance direct-drive door operator with a 90V DC horsepowerrated motor engineered for balanced commercial and industrial doors
    • .......more details
PDC-300-050-1.25-40/75-20-CH

Pulse 300 Direct Drive Opener 1/2 HP 1.25" shaft 110/240V 1ph 40:1 20' Cable

  • Advanced speed control: up to 24"/s opening up to 16"/s closing
  • Built-in 24V 9Ah battery backup
  • Soft start/stop functionality
  • Universal single-phase power compatibility: 110-240V 50/60Hz
  • Adjustable force monitoring
  • Programmable closing timer: 1-99s A high-performance direct-drive door operator with a 90V DC horsepowerrated motor engineered for balanced commercial and industrial doors
    • .......more details
PDC-300-050-1-40/63-20-CH

Pulse 300 Direct Drive Opener 1/2 HP 1" Shaft 110/240V 1ph 40:1 20' Cable

  • Advanced speed control: up to 24"/s opening up to 16"/s closing
  • Built-in 24V 9Ah battery backup
  • Soft start/stop functionality
  • Universal single-phase power compatibility: 110-240V 50/60Hz
  • Adjustable force monitoring
  • Programmable closing timer: 1-99s A high-performance direct-drive door operator with a 90V DC horsepowerrated motor engineered for balanced commercial and industrial doors
    • .......more details
PDC-300-050-1-40/50-20-CH

Pulse 300 Direct Drive Opener with Manual Chain Hoist 1/2 HP 1" Shaft 110/240V 1ph 40:1 20' Cable

  • Advanced speed control: up to 24"/s opening up to 16"/s closing
  • Built-in 24V 9Ah battery backup
  • Soft start/stop functionality
  • Universal single-phase power compatibility: 110-240V 50/60Hz
  • Adjustable force monitoring
  • Programmable closing timer: 1-99s A high-performance direct-drive door operator with a 90V DC horsepowerrated motor engineered for balanced commercial and industrial doors
    • .......more details
PDC-300-100-1-40/63-20

Pulse 300 Direct Drive Opener 1 HP 1" shaft 110/240V 1ph 40:1 20' Cable

  • Advanced speed control: up to 24"/s opening up to 16"/s closing
  • Built-in 24V 9Ah battery backup
  • Soft start/stop functionality
  • Universal single-phase power compatibility: 110-240V 50/60Hz
  • Adjustable force monitoring
  • Programmable closing timer: 1-99s A high-performance direct-drive door operator with a 90V DC horsepowerrated motor engineered for balanced commercial and industrial doors
    • .......more details
PDC-300-075-1-40/50-20

Pulse 300 Direct Drive Opener 3/4 HP 1" shaft 110/240V 1ph 40:1 20' Cable

  • Advanced speed control: up to 24"/s opening up to 16"/s closing
  • Built-in 24V 9Ah battery backup
  • Soft start/stop functionality
  • Universal single-phase power compatibility: 110-240V 50/60Hz
  • Adjustable force monitoring
  • Programmable closing timer: 1-99s A high-performance direct-drive door operator with a 90V DC horsepowerrated motor engineered for balanced commercial and industrial doors
    • .......more details
PDC-300-050-1.25-40/75-20

Pulse 300 Direct Drive Opener 1/2 HP 1.25" shaft 110/240V 1ph 40:1 20' Cable

  • Advanced speed control: up to 24"/s opening up to 16"/s closing
  • Built-in 24V 9Ah battery backup
  • Soft start/stop functionality
  • Universal single-phase power compatibility: 110-240V 50/60Hz
  • Adjustable force monitoring
  • Programmable closing timer: 1-99s A high-performance direct-drive door operator with a 90V DC horsepowerrated motor engineered for balanced commercial and industrial doors
    • .......more details
PDC-300-050-1-40/63-20

Pulse 300 Direct Drive Opener 1/2 HP 1" Shaft 110/240V 1ph 40:1 20' Cable

  • Advanced speed control: up to 24"/s opening up to 16"/s closing
  • Built-in 24V 9Ah battery backup
  • Soft start/stop functionality
  • Universal single-phase power compatibility: 110-240V 50/60Hz
  • Adjustable force monitoring
  • Programmable closing timer: 1-99s A high-performance direct-drive door operator with a 90V DC horsepowerrated motor engineered for balanced commercial and industrial doors
    • .......more details
BEA-10EVOLOOP

BEA EVOLOOP Induction Loop Replacement for Automatic Barrier Gates

  • Evoloop is the alternative to traditional in-ground induction loops used for vehicle detection in parking access and security applications
  • Ideal for Automatic Barrier Gate Operators when installing a tradition in-ground loop is not practical (winter weather or the customer doesn't want to cut new ashalt etc.)
  • Designed with a 140 degree field of view Evoloop allows for up to 3 virtual loops that provide precise detection for control of the barrier.
  • Dimensions: 2" x 6" x 2-5/8"
  • Mounting height between 12" and 27" from the road surface
  • Supply voltage: 12-30VDC +-10% / 12-24V AC +-10%
    • .......more details
PDC300-1-125-40-20

Pulse300 Direct Drive Opener 1 HP 110/240V 1ph 1.25" Shaft 40:1 20' Cable ** Price by Quote Only

  • Advanced speed control: up to 24"/s opening up to 16"/s closing
  • Built-in 24V 9Ah battery backup
  • Soft start/stop functionality
  • Universal single-phase power compatibility: 110-240V 50/60Hz
  • Adjustable force monitoring
  • Programmable closing timer: 1-99s A high-performance direct-drive door operator with a 90V DC horsepowerrated motor engineered for balanced commercial and industrial doors
    • .......more details
PDC-300-075-1.25-40-20

Pulse 300 Direct Drive Opener 3/4 HP 1.25" shaft 110/240V 1ph 40:1 20' Cable ** Price by Quote Only

  • Advanced speed control: up to 24"/s opening up to 16"/s closing
  • Built-in 24V 9Ah battery backup
  • Soft start/stop functionality
  • Universal single-phase power compatibility: 110-240V 50/60Hz
  • Adjustable force monitoring
  • Programmable closing timer: 1-99s A high-performance direct-drive door operator with a 90V DC horsepowerrated motor engineered for balanced commercial and industrial doors
    • .......more details
41D0236

LiftMaster keypad replacement kit for EL25 and EL2000

  • This replacement keypad features a 16 button face with weather protection gasket
  • fits Elite series EL2000 and EL25 access control systems
  • Also known as: 041D236 180D0236 00000000000180D236 180D236
041-0186-000

LiftMaster LED Light Pod Kit for 87504-267 model

  • Light Pod Replacement Kit. For use with various Chamberlain® Single Lens Belt Drive and Chain Drive Garage Door Openers featuring myQ® technology and no video camera; manufactured after 2021 only.
20111

Doorlec Cam Retainer Plate Springs *** Replaced by 26117

  • Works on GH/GHX
R2AES

Erone Radium 2-Button AES128 Encrypted Transmitter

  • Compatible with any high-security AES128 wireless receivers they were designed to prevent the cloning of remotes.
  • The code sent by the transmitter changes at each activation removing any scanning and copying risk.
  • A special algorithm ensures a continuous synchronization between the receiver and remote.
  • Includes AES128 encryption
  • Compatible with RADIUM AES128 receivers
  • Heavy-duty construction
    • .......more details
JHDC12S1BE

LiftMaster MAXUM Jackshaft 3/4HP 120/240V 1PH DC Operator 30 Cycles/Hour 1200LB 3" output shaft

  • New DC high-efficiency motor and gearbox provides the power needed and smooth start and stop to reduce wear-and-tear on your door and operator
  • Average of 12” per second opening on sectional doors and 8-9” per second on rolling steel doors
  • Provides seamless operation by supplying standby power when the power is down (battery backup kit sold separately)
  • Listed to ANSI/CAN/UL325 Standard for USA/Canada
  • Drive Type 65:1 Gearbox with #50 Chain Output
  • Radio Receiver DC Logic 1.0 board with Security+ 2.0® rolling code technology remote controls and binary DIP switch remote controls
    • .......more details
Auxiliary ModificationDual Auxiliary Trolley ModificationMAXUM Manual dinstallationMAXUM Installation ManualMAXUM Fiche TechniqueMAXUM Data SheetMAXUM Product GuideMAXUM Buying Guide
487135

Bircher Easy Loop Bracket

  • Bracket for part #487132
39794A.S

Genie Universal Cable Keeper Kit 39794A.S

  • Universal Cable keeper kit for Genie Wall Mount garage door openers.
  • Compatible with models 6070H 6070H-B 6170H 6170H-B 6172H 6172H-B 6072
  • Genuine Genie Replacement Part
2420L

Special ends 2026-05-31

LiftMaster Basic Series Chain Drive 3/4HP DC Motor Wi-Fi Battery Backup Integrated Camera

  • Chain Drive and DC motor with soft start/stop for quiet operation
  • HD Quality Camera with night vision
  • 1 LED bulb (60 watt max)
  • Two-way communication to the myQ app
  • Premium battery backup included (485LM)
  • Comes with: 1 (L993M) 3-button remotes
    • .......more details
Product Guide 2420LAccessory Compatibility Chart 2025Comparison Chart 2025
MX001100

HySecurity Crankshaft w/Crank Bearing Zerk for StrongArm

  • Compatible with StrongArm systems
  • Includes crank pin bearing and zerk fitting
  • Two key stock for secure arm mounting
  • Supports smooth and efficient gate operation
MX000641

HySecurity Left Counterweight Mount for StrongArm

  • Compatible with StrongArm systems
  • Designed for left-hand configurations
  • Supports balanced gate movement
  • Reduces strain on gate operators
K07-2706

LiftMaster Arm Hub

  • Also known as: 072706 07-2706 07-2706-1 G072706
  • For use with various LiftMaster® SW420 Series Swing Gate Operators
114-0328

RW Track Bracket #31

  • 18 x 31
1-1093

RW Track Bracket #333

  • 22 x 333
PDC300-34-1-40-20

Pulse300 Direct Drive Opener 3/4 HP 110/240V 1ph 1" Shaft 40:1 20' Cable ** Price by Quote Only

  • Advanced speed control: up to 24"/s opening up to 16"/s closing
  • Built-in 24V 9Ah battery backup
  • Soft start/stop functionality
  • Universal single-phase power compatibility: 110-240V 50/60Hz
  • Adjustable force monitoring
  • Programmable closing timer: 1-99s A high-performance direct-drive door operator with a 90V DC horsepowerrated motor engineered for balanced commercial and industrial doors
    • .......more details
41011

Doorlec Brake Release Cable

  • Used on GH
2806.177*340

Whiting Spring Assby .177 x 2-3/16 x 34" Roadside

  • Replacement torsion spring with cones
  • Specs: .171 x 2-3/16" x 34" Long
  • Roadside
  • For Curbside order part # 2807.177*340
DC300-50-1

Dyna-Hoist 300 Series Direct Drive BBU 1/2 HP 110/240V 1" Shaft 40:1 Ratio ** Quote Only

  • Special-Order. Price by Quote Only
  • Automated battery backup - the unit continues to work on batteries with full functionality (but does move more slowly) until the unit gets to about 75% of battery capacity then transitions to push and hold operation.
  • The 300 series also works with and powers 12V automatic lock systems
  • Option available: 5-conductor cable (5') to reduce the risks of miswiring incidents available in 5' 10' 15' 20' or 25' lengths
  • Integrated software fuse that shuts down the unit to help prevent board component disasters should these be incorrectly installed on grossly imbalanced or improperly sized doors.
  • 30:1 40:1 50:1 gearbox ratio are available. Please specify when ordering otherwise 40:1 will be supplied
    • .......more details
201-300-401-01-REFRUB

Refurbished 201-300-401-01 Unit