Devanco Canada - Get The Right Garage Door Opener‎ and Parts

MTR3

Linear 3-Channel Visor Transmitter 318MHz ** To extent of Inventory

Activates three MegaCode receivers
Test/operate LED
Visor mounting clip supplied
Visor clip mounts vertical or horizontal
Power: One 2032 battery
Codes: 1000000+ (MegaCode format)
RF Frequency: 318 MHz
Dimensions: 3" W x 1.7" H x .6" D
Replacement battery CR2032

Programming instructions Instructions de programmation

DW-TR-200

Fraba Wireless Air Wave Switch Transmitter Only

Includes transmitter DWTR-200 433 Mhz only
A small radio transmitter and the pneumatic switch are packaged within the DW3S-200 case does not come with copper end
Comes with battery (CR2)

Operating Instructions

02-410

LiftMaster Commercial Key Control Station Open-Close and Off with Stop Button

Outdoor Surface Mount Nema 4/12 station
Standard key cylinder
Open/Close spring return to center (off)
Key removable in center position only
With Stop button

KPW5

LiftMaster New Wireless Commercial Keypad 5-Code Sec.+2.0

Designed to work exclusively with Security+ 2.0
5 permanent PINs and 10 unique temporary PINs ideal for residential and small commercial applications; unique temporary PINs can be set for 1 to 9 uses
Allows for removal of a single PIN while maintaining full access for other users
High-impact polycarbonate front cover; perfect for rugged outdoor environment
Blue backlit metal keypad makes it easy to use under low-light conditions
Electronics are fully sealed and meet NEMA 4X water protection requirements

.......more details

Programming instructions Instructions de programmation Sell sheet Brochure Compatibility chart

KPX-100

EMX Access Control Keypad

Stainless steel face with metal backlit keys
Anodized and powder coated steel outer housing that is vandal and weather resistant to IP66 (all weather)
Dual relay outputs
Over 100 Million 4-8 digit codes
12-24V AC/DC operation
100 user codes on Relay 1; 10 users relay 2

.......more details

37516S

Genie Belt only for 8ft Door

Replacement belt only for 8ft door
Fits Genie model Destiny 1200

370-3343

Stanley Magnet Assembly for Quiet Glide

24851

Stanley Traveler Carrier Kit

Works with all Stanley chain drive units from 1992-present
Same as part no. 9200014
Trolley slider for part no. 49563

Installation Instructions Instructions d'installation

K79-15016-1

LiftMaster RPM Sensor Assembly

RPM sensor for Liftmaster Logic Control L2 L3 L4 & L5 Commercial operators

RA-LYNX-RCVR

Lynx External Receiver

Add to most operator systems
Use with either residential or commercial applications
Unlimited transmitter capacity

Programming instructions Compatibility chart

1005-1-3/4-24'

Aluminum Bottom Retainer U-Shaped

For door thickness 1-3/4"

DT4A

Linear 4-btn Delta3 Transmitter 310 MHz (DNT00027B)

Activates one four-channel receiver (DR4) two 2-channel receivers (DR2) or four single-channel receivers (DR DRQP or DRM).
Can also be used as remote UP DOWN STOP control for commercial operators with DR-4 receiver.
8-dip switch 64 selectable codes
Same as: DNT00027B or DT4A
310 MHz frequency

Programming Instructions

25-10101

Truck Door 2" Nylon Roller 3" Shaft for Whiting Roll-up Doors

Zinc plated shaft 10 roller ball design
Shaft Length: 3" Overall Length: 3.75"
Cross Reference: W #3228 T #61424 T #70225
Box quantity: 25

E/1929/025

Automatic Systems Bumper and Limit Switch Ass'y (BL229)

Used on the BL229 gate op.

L979S

LiftMaster Standard Wireless Keypad Security+ 3.0

Compatible with LiftMaster® Security+ 3.0™ Garage Door Openers.
Designed to withstand all weather conditions.
NEW! Set up and manage your keypad in the myQ app for a more personalized experience.
Ultra-secure encryption.
Features one-touch close and personal PIN creation.
Warranty: 1 Year

.......more details

Installation Manual Manuel d'Installation Accessories Compatibility Chart 2025 Comparison Chart 2025

02-401M

LiftMaster 1-Button Control Station

For use with various LiftMaster® Logic 4.0/5.0 and MAXUM Series Commercial Door Operator Applications
Sends the door to the full open position. Perfect for time sensitive situations.

JHDC22X1BMC

LiftMaster MAXUM Jackshaft 1.5 HP Heavy Duty 120/240V 1PH 60 Cycles/Hour 2200LB

New DC high-efficiency motor and gearbox provides the power needed and smooth start and stop to reduce wear-and-tear on your door and operator
Average of 12” per second opening on sectional doors and 8-9” per second on rolling steel doors
Provides seamless operation by supplying standby power when the power is down (battery backup kit sold separately)
Listed to ANSI/CAN/UL325 Standard for USA/Canada
Drive Type 65:1 Gearbox with #50 Chain Output
Radio Receiver DC Logic 1.0 board with Security+ 2.0® rolling code technology remote controls and binary DIP switch remote controls

.......more details

210339

Skylink Belt Gear with Holder LQ-803

10LZR-FLATSCAN-SWB

BEA LZRFLATSCAN Kit Black 2 Sensors + Cables & Accessories

Time-of-flight presence sensor for use as a stand alone safety sensor on automatic pedestrian swing doors.
Can be used as a reactivation sensor on the approach side of low energy doors.
Generates 170 detection points across a single curtain allowing for coverage over the entire face of a single door leaf including the hinge area.
Finger Detection Technology™ utilizes 100 detection points within the hinge area of the door protecting hands and fingers while the door is in motion.
Max. detection range: 13' with a reflectivity of 2%
IP54

.......more details

BEA-10EAGLE-ARTEK

BEA Eagle Compact Motion Sensor 6'-13' Mounting Height

EAGLE ARTEK is a motion sensor for all types of automatic doors. Its slim and compact design ensures discreet integration for your application making it ideal for pedestrian doors.
Superior field performance with improved filters that help to reduce false detections.
Easy to install and set up with flexible parameters and simple push-button settings. •The detection field can be adjusted without manually adjusting the antenna.
Max. detection range: wide: 13’ × 6.5’ narrow : 6.5’ × 7’ (@ 7’ high)
Temperature range: -4 – 131 °F (-20 – 55 °C)
Cable length: 8’

.......more details

Installation manual Spec sheet

REEL-20

Devanco Take-Up Reel 2-Wire Metal 18-ga 20ft Black

18-gauge
20 ft extended
Take up reels are NOT recommended for use with any failsafe type edge. Use coil cord only.
Also called Reel cord
Comes with reset button for CSA conformity

P-831RE

Pulsar 1-Door O/C/S Receiver 318 MHZ P-110554

Allstar compatible
Economy housing receiver
OPEN-CLOSE-STOP
24V AC/DC
8 dipswitches 318 MHz

Wiring-diagram

P-733T

Pulsar 3-btn 3-Door O/C/S Transmitter 318 MHz

Allstar compatible
Wall mount
OPEN-CLOSE-STOP 3 doors
8 dipswitches 318 MHz

Programming instructions

WR2

Erone Radium Stand-Alone Wireless Receiver 2-Relay 433MHz

Up to 85 transmitter keys
1 NO relay + 1 NO/NC relay (24VA)
Self-learning memorization
Standard pulse output
Power requirements: 12/24Vac/dc
These 433 MHz radio frequency systems offer longer range (up to 250m (820ft) less interference jamming and excellent reliability

.......more details

Instruction manual

LC-36M

LiftMaster Light Curtain Monitored

The Monitored Light Curtain is a primary safety entrapment protection device that is compliant with UL 325.
IP67 Water-resistant housing anodized aluminum corrosion resistant
Operating Temperature: -40° F to +140° F (-40° C to +60° C)
Liftmaster Compatibility: LOGIC 5.0 Medium-Duty DDO8900W / LJ8900W / LJ8950W / ATSWVFOH HPH1 / HPH2 HCTDCUL Fire Door Egress

Product Guide (EN)Guide du Produit

LA400PKGUL

LiftMaster Residential 24V DC Swing Gate Operator All-In-One UL325

LED DIAGNOSTIC DISPLAY Simplifies installation and troubleshooting.
WIRELESS DUAL-GATE COMMUNICATION Eliminates expensive conduit costs and unsightly driveway scars.
BI-PART DELAY Monitors and adjusts speed and position of each wing to ensure primary gate closes last.
SYNCHRONIZED CLOSE Simultaneously closes gates. WITH OPTIONAL EXPANSION BOARD
PROGRAMMABLE AUXILIARY RELAYS Easily add additional features such as warning lights/alarms.
ANTI-TAILGATE Prevents unauthorized access. Gate will pause when closing as vehicle pulls onto interrupt loop or breaks photo beam. Once vehicle backs up gate will continue to close.

.......more details

Installation manual Manuel d'installation Data sheet

F400-1

FAAC 400 Hydraulic Swing Gate Operator Kit 115V dual swing gate

Kit includes: 2 FAAC operators 2 internal stops 1 control board 1 enclosure 1 photocell pair 2 copacitors 1 transmitter and 1 receiver
Max Gate Length: 16
Max Gate Length w/ External Lock: 23
Maximum Force Output: 1740
Duty: Continuous
Cycles Per Hour: 80

.......more details

CP-PW-NM-CDJH

Lynx Pocket Wheel for CDJH Hex Bore OD 6.35"

Same as #2-30-1

BCSI-BM-31

Disconnect Lever Industrial Slide Gate Operator ** Please use BCSI-PM31

WRW

Erone Wiegand Wireless Receiver 433MHz

433 MHz radio frequency systems offer longer range (up to 250m (820ft) less interference jamming and excellent reliability.
KeeLoq® Rolling Code technology ensure ultra-secure transactions.
Output: Wiegand 26 bit
Power requirements: 12 or 24V (AC or DC)
Dimensions: 105 x 45 x 28mm (4.3 x 1.75 x 1.1in)
Compatible with Centaur and any 26 bit Wiegand-capable systems

.......more details

Wireless System Chart

PRO-PL-20053

Micanan Wall Mount Control Panel Mod. Contactor 20" x 16" x 8" Stainless Steel Panel Nema 4/12

Standard features include B2 C2 wiring 24V controls Hinged cover Backplate Primary fuses in panel

27028

Doorlec Electric Motor 3/4HP 115/230V DC403C

Bolts to gearhead (c-flange) openers

Wiring diagram for 120V Wiring diagram for 230V

MET-14500C

Cable Tie Metal Tooth 14" 50 LB Black 100/Bag

Q029

LiftMaster Limit Switch for Elite Gate Operators (K23-50099)

Sold individually
For Elite Miracle-One arm SL3000 CSW200 and robo slide and robo swing gate operators.
Same as part no. K23-50099

.187-2-R

Cut-to-Length Torsion Spring .187 x 2" Right Hand Wound

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

GC-100

Devanco Foaming Glass Cleaner 538g

A powerful foaming glass cleaner goes on thick does not run and wipes off clean
Does not leave streaks or an oily film on the glass
Virtually odorless

Safety data sheet Fiche de données de sécurité

T-833-C-OCS

Allstar 3-btn 3-Door O/C/S Transmitter 109025-311 MHz****NLA

Open/Close/Stop remote for 3 doors
Compatible with 3-channel Allstar and MVP receivers
Portable transmitter
Easy access to battery and coding switch
Slide switch selects door to operate
Power: 9-volt battery

.......more details

Programming Instructions

ACT-31B

Linear 1-Channel Block Coded MegaCode Key Ring Transmitter 318 MHz (ACP00879)

Compatible with all Linear access receivers and controllers
Supplied with quick-disconnect key ring
Power: Two CR2016 batteries incl.
Codes: Factory block coded in MegaCode format
RF frequency: 318 MHz
Dimensions: 1.25" W x 2.25" H x .48" D

.......more details

Programming Instructions

02-103

Push Button Station 3-btn Surface Mount Metal Housing

PBS-3
Open-Close-Stop
Momentary contact
Nema 1
Dimensions: 5-5/16" H x 2-3/8" W x 1-13/16" D

BRAKEPART018

Manaras Brake Shoe Assembly Kit

Kit includes SHOE001 & SHOE002 for old brake system.
Fits all Manaras operators except gear head made prior to 1999.

Drawing

SPREADER001

Chain Tensioner for 1" shafts

Chain spreader for installation with 1" operator shaft & 1" door shaft.
Includes 2 shaft collars and set screws.
Designed to keep tension on the chain when used with a wall mount commercial operator. It helps avoid premature wear on the door shaft bearing and commercial operator output shaft bearing

Installation instructions

BLOCK-YELLOW

Spring Repair Blocks .3175-.3625 Pair

For the temporary repair of a broken spring.
Wire size: .3175 - .3625

903ADJORBX

Operator Reinforced Bracket 18-24" Adjustable Zinc Plated No Hinge

Also known as ARB brackets

MOTOR189

Manaras Electric Motor 1/2HP 120V 1PH

Instant reverse
Medium-duty 1050 rpm
For OMT MLJ MLH MLT

JHDC12S4BMC

LiftMaster MAXUM Jackshaft 3/4HP 480V 3PH DC Operator 30 Cycles/Hour 1200LB

New DC high-efficiency motor and gearbox provides the power needed and smooth start and stop to reduce wear-and-tear on your door and operator
Average of 12” per second opening on sectional doors and 8-9” per second on rolling steel doors
Provides seamless operation by supplying standby power when the power is down (battery backup kit sold separately)
Listed to ANSI/CAN/UL325 Standard for USA/Canada
Drive Type 65:1 Gearbox with #50 Chain Output
Radio Receiver DC Logic 1.0 board with Security+ 2.0® rolling code technology remote controls and binary DIP switch remote controls

.......more details

D-TEK-LP

EMX Industries Low Voltage 11-Pin Single Channel - Dual Relay Loop Detector (2500-1)

Power Supply: 12-24 Volts AC/DC
Current Consumption: < 9 mA
Operating Temp: -40°F to 180°F
Surge Protection: Zener Diode /MOV
Output Relays (2): 1Amp 30 VDC
Loop Input: Transformer isolation lightning and transient protection (1)

.......more details

Manual - LP-D-TEK Spec Sheet - LP-D-TEK

WD-8300

Wayne Dalton Classic Steel Garage Door ** By Quote Only

Heavy-gauge steel and a thick layer of insulation provides a smooth dependable operation that excels in appearance and strength.
R-VALUE: 12.12 / 16.12
WD's best-insulated residential garage doors feature two layers of steel surrounding a thick layer of foamed-in-place polyurethane insulation.

29-NP812

Lead Acid Battery 12V 8A

Also known as: 29NP0812 K29-NP08-12 29-NP08-12

P-9931T

Pulsar 1-btn Transmitter 318 MHz

Allstar compatible
Single channel transmitter
8 dipswitches 318 MHz

Programming instructions

41C4672

LiftMaster RPM Sensor Kit Screw Drive *** No Longer Available

For use with various LiftMaster® and Chamberlain® Screw Drive Garage Door Openers
Same as 041C4672

5415-2

EMX RAVEN Dual Relay Microwave Motion Sensor

Distinguish between vehicles and pedestrians
Two configurable relay outputs
Adjustable sensitivity and cross traffic suppression
8-23 ft (2.5-7 m) mounting height
Optional remote control for easy programming

RLC-K72

Miller Edge Light Curtain Non- Monitored 6ft

Light curtain made up of a series of thru-beam photo eyes designed to provide a dense barrier of protection for motorized or high speed doors.
Ideal for environments that require expanded protection for protruding parts that may not be detected by standard single-beam photo eyes mounted 6" above the floor.
Ideal for pre-2010 installations not requiring a monitored solution.
Ability to span up to 32' wide
Universal mounting brackets included
IP67 waterproof housing

.......more details

Installation manual sell sheet

ME-00009

Micanan Trolley Track Spreader Bar Assembly 1 Unit Only

3/4" x 5.79" long
2 are included when bought in the kit #MX-00119

LM4AH-12

LiftMaster Battery 4.5AH 12VDC

Designed to fit Fire Fly III Plus Model of Release Device
12 Volts 4.5 AHR (amp hour rating)
Dimensions: 4" Depth 2-3/4" Length 3-1/2" Wide

IC-10

Wheel Chock IC-10 Ice Formed Steel Tooth Grip

"Tooth" Like Bottom Grips Icy/Slippery Ground Surface
Powder Coated Yellow for High Visibility
Formed Stee]l
Size: 8" wide x10-1/2" long x 9-1/4" high

M-30

Molded Rubber Bumper Black 30" L x 10" W 4" Projection 3-Hole Sold Individually

Manufactured from reinforced prime rubber
Rectangular horizontal mount
Ideal for light traffic loading docks.
Perfect protection for in-plant wall protection from forklifts and other material handling vehicles molded bumpers will not warp rust rot or harden.
Bumper comes with 3 pre-drilled countersunk mounting holes drilled to accept 3/4" anchor bolts
30" L x 10" W 4" Projection

.......more details

CHK-991

Chain Hoist Keeper

Chain hoist keeper is not the same as the chain keeper

DXSR-1504

Linear Supervised 4-Channel Reciever ***No Longer Available

Dual diversity superheterodyne receivers
Compatible with DX and DXS transmitters
Measured line-of-sight range of 1500 Feet
Quick-learn programming
Selectable supervision
Individual outputs per RF channel for alarm low battery and status trouble reports

.......more details

MS001

LiftMaster MSL & MSW Control Board (K79-60142)

Replacement logic board for the Mega Slide and the Mega Swing gate operators.
Can be used in various Autogate Operators same as AG001

60-2439

Allen Bradley Swivel / Tilt Mounting Bracket ***To Extent of Inventory

For 9000 series photo switches

MK-00697

Micanan Fraba FOS-1 Exterior Thru-Beam Photocell Nema 4 / 4X 45ft Range

Exterior Through-Beam Photocell
Sensing Distance 45 Feet
UL325/2010 Recognized Component
Comes with Sender Receiver and Brackets
NEMA 4 & 4X

Installation manual

79-16088

LiftMaster Circuit Board Assembly for LGO **discontinued**

Same as K79-16088

IS40P

BEA Presence Sensor

Infrared presence sensor for use in industrial applications. The sendor utilizes 40 active infrared spots for reliable detection.
Ideal for use on automatic industrial doors vehicle gates/barriers and loading docks.
Equipped with 9 pre-programmed pattern configurations for various industrial applications.
Various learn time settings allow presence detection to either remain constant or ignore a motionless object after a pre-determined period of time.
Mounting height: 8-16'
Detection field: 10'x10' at max. mounting height of 16'

.......more details

Installation manual Sell sheet Cut sheet

69C

Skylink 1-Button Universal Keychain Remote *** NLA

It's small enough to carry in your pocket or purse
The 69C is a great universal remote and it is compatible with almost any garage door up to 2007 (see compatibility chart for exact brand names).
It has just one simple button and a unique keychain attachment which makes it ideal for use with convertibles motorcycles bicycles or any other vehicle without the usual sun visor.
It connects to your garage door using a series of DIP switches making it simple to program it even if your garage door dates as far back as the 1980s.
Model 69c is not compatible with Stanley "Securecode"
Compatible frequency: 390/318/315/310 Mhz

.......more details

Compatibility Chart

SETMCIC9V

Erone 1-Channel Wireless Module 433 MHz

You can replace the battery with a power supply by removing the SETMC1C9V battery adapter and connect the red (9V) and black (0V) wire into power supply
Connect a door contact motion detector or any relay activated devices to the SETMC1C9V it will communicate their status wirelessly
Works with any 433 MHz Erone receiver

Wireless System Chart

36163R

Genie Dual Frequency Intellicode Receiver 315 MHz & 390 MHz

For Genie Intellicode Rolling Code remotes Or Overhead Door Code Dodger remotes using the 315 or 390MHz frequency.
24-Volt 3-Wire Connection For Garage Door Opener And Gate Openers.
Accepts Up To 8 Genie Intellicode Or Overhead Door Code Dodger remotes on 315 or 390MHz Frequency. Note: Will not work with the older code switch type of remotes.

25605R

Genie Inner Slide Kit for Chain Drive Models

The innerslide attaches to the chain and connects the carriage to the chain
Works on the following Genie and Overhead Door models:
IC250 PMX80 PMX500-IC/B IC250/B PMX85 ALC Series PMX60 PMX300-IC/A RCD Series PMX65 PMX500IC/A PMX75 PMX-IC/B
SP99 – SP SERIES LD100-500-100A-550A LAD125-555
CM6000-6000A-60-70-80-60S
OHD-696 696CD + Others

.......more details

.243-2-R

Cut-to-Length Torsion Spring .243 x 2" Right Hand Wound White/Yellow

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

STRIP_CURTAIN

Complete PVC Strip Curtains Made to Order

Please call us for price and delivery we can supply complete doors and replacement PVC strips for existing installations. Many different sizes and colors are available

41DB002-2

LiftMaster Circuit Board Assembly *** To Extent of Inventory

Assembly includes: Circuit board end panel and light socket
For belt drive units with two lights such as 3850C
Same as 41A5685

.273_2-5/8"-RH

Torsion Spring .273 x 2-5/8" x 12ft RH Orange/Red

Wire size: .273
Inside diameter: 2-5/8"
Length: 12 ft

VTS3-PER-FOOT

Top Seal vinyl only Black Price per Foot

DC2000

LiftMaster Controller DC2000

DC2000 Controller with battery backup
BackUp Commercial Vehicular Gate Operator
12VDC - 30 Amps Max.
125 lbs. Max. pull @ CSW-200 Units
105 lbs. Max. pull @ SL-3000 Units

TSTL

EMX Test Loop

Electrical diagnostic tool for loop and vehicle detectors
Two-wire: red and black
Dimensions: 1.25 inches (H) x 1.25inches (W) x .75inches (D)
Compatible with most brands of loop detectors

P-535T

Pulsar 3-btn 27-Door O/C/S Transmitter 318 MHz

Allstar compatible
Wall mount
OPEN-CLOSE-STOP 27 doors
8 dipswitches 318 MHz

Programming instructions

1-0241

RW Stay Roller 66 Black/Grey 2" Dia

Special order item
For use inside doors and can be fastened to concrete with expansion bolts.
Steel frame with a black enamel finish and a grey iron wheel.
2-inch diameter roller

GH-343-1.5

Doorlec Industrial Jackshaft Door Operator 1.5 HP 460V 3-Phase

Custom-designed extra heavy-duty industrial-type electric door operator
Worm gear reducer 40:1 ratio
#60 roller chain and sprockets from operator shaft to door shaft.
Door speed: 7 inches per second (approx.)
Adjustable torque limiter
Rotary type limit switches

.......more details

50074

Doorlec Flashing Light Option for TCBOD 120 volts can be field installed

Light package with flashing relay

AHB-716

Adjustable Hinge Bracket for 7/16" Roller Shaft

Mounts on the #1 hinge to make the hinge adjustable from #2 through #13
Eliminates the need to stock odd size hinges
Works for 7/16" shaft diameter rollers

41D3058

LiftMaster Electric Motor and Bracket Kit

Complete kit includes: Motor and bracket assembly sprocket RPM sensor grease and bearings
Also known as: 41D3058 41A2821 41A2820 41A3058

DW-3S-300

Fraba Air Wave Switch Larger Housing with Copper End NOC

Fraba DW3S-300 air switch 10008797-2
Normally Open Contact (NOC)
Screw Type Connector
Dimensions: 158x60x39 mm (6.22" x 2.36" x 1.54 '')
Housing: ABS Switch: PA6V0 Nema4
Normally Closed Contact achieved by adjusting the sensitivity screw

.......more details

Operating Instructions

K75-39337

LiftMaster Trolley Nut Kit LA500

The travel nut on LA500DC and LA500DCS gate operators may break when excessive force is applied to the gate such as being struck from a vehicle.
The travel nut can be identified as the white plastic nut that attaches to the internal lead screw of the arm.
The symptom of this problem is that the trolley assembly slides back and forth along the guide slots without mechanical restraint.
LiftMaster has created Trolley Service Kit K75-39337 with all the necessary parts and provides instructions on how to replace a damaged travel nut within an LA500 arm

Replacement instructions Instructions de remplacement

BEA-10-BR3X

BEA Programmable 3 Relay Logic Module w/13 Functions

For use on automatic pedestrian doors access controls industrial automation and single-occupancy restrooms. •13 Functions Include:
Timer
Ratchet/Latching
2 Relay Sequence + Inhibitor
2 Relay Sequence + Door Position
Deactivation Timer

.......more details

Product guide

R1

Erone Radium 1-Channel Key Chain Transmitter 433MHz

Designed for the control of automatic closing systems and anti-burglar systems thanks to its very high security coding system (KeeLoq® Hopping code).
The code sent by the transmitter changes at each activation avoiding any scanning and copying risk.
A special algorithm allows to keep synchronized transmitter and receiver.
Range up to 250 m (820 ft)
Ergonomic rugged & durable
Battery: Two 3V lithium battery (CR2016)

.......more details

Wireless System Chart

MJ00015

Micanan Brake Shoe Assembly for Old Style Manaras Operators

Assembly includes both right & left brake shoe

BINS-BLACK

Utility Bin Heavy-Duty Stackable Black ** NLA

Usable in virtually every environment both indoor and outdoor and they are made from Polypropylene which will not fade in the sun
Outside dimensions: 16.75" L x 10.75" W x 6.55" H
Inside dimensions: 12.15" L x 8.375" W x 6.5" H
Sold per bin

38123A

Genie Powerhead Mounting Flange

Mounting bracket connects the powerhead to the rail assembly.
A tongue on the flange fits into the bearing block assembly on the rail to keep it in place.
Fits TriloG PowerLift GPower and PowerMax Operators

41B0873

LiftMaster Safety Sensor Sunblocker Kit Works With 41A5034 and 041-0136

This complete kit is used to shield sunlight and prevent accidental reversal of garage door from sunlight shinning directly into the safety sensors
Works with 41A5034
Same as: 041B0873 41B873

226-9313

Lithium AA 3.6V Battery

Used in various types of photo eyes

GL-24-LED

Guide Lights for Loading Docks Amber LED 12-24VAC/DC 24-3/8" long Sold Individually

LED lights offer long-lasting reliable high-visibility in all weather conditions including direct sunlight with low power consumption.
Robust housing resists impact and corrosion.
Slim discrete design ensures little risk of damage due to accidental impact.
Wide input voltage range of 12-24Vac/dc (control box available for alternate voltages).
Boards coated in water-resistant polymer for optimal protection from water and humidity.
24 LEDs per guide light

.......more details

SPECIALPANEL001

Manaras Complete C-Box Special Order

Includes limit system limit shaft.

90_9210MO

LiftMaster Auxiliary Limit Switch Mod M62 Open Factory Installed

Provides a limit switch for use by others to control auxiliary devices such as lights heaters dock levelers or other equipment.
The switch can be used to turn on or off such equipment when the door is fully opened or fully closed.
When ordering specify whether the auxiliary switch is required on the OPEN or CLOSE side of the control enclosure.
A maximum of 2 switches per operator can be supplied.
Each switch is SPDT (form C) and is rated 10 amps at 125/250 VAC
Wire leads are provided on field install kits

.......more details

2JW-D064

Rolling Steel 2" Curved Cast Windlock

Windlocks are especially used on rolling steel doors and shutters to prevent "blow-ins" from severe storms or winds.
A wind lock is a small metal device that is attached to each slat.
Its primary function is to reduce the amount of friction that occurs between the actual door & the guiding panel.
When the wind is strong the roller door may be dislodged bent or misaligned from the guide.
With a windlock your door can operate efficiently despite wind load or pressure.
Windlocks are easy to add on to any existing rolling steel or shutter door

.......more details

CP-EB-MCJ-34115

Lynx E-Box for MCJH 3/4HP 115V 1Ph

Complete electrical box

49564

Stanley Chain Drive Traveler

Compatible with all Stanley chain drive units from 1982-present
Not compatible with C-Channel models
Same as part no. 3701965 3703375 3702540
If trolley slider no. 24851 is also required order part number 49563

Installation Instructions Instructions d'installation

12-000I

Secure Brands Keypad with Intercom Post Mount

Post mount with Intercom
RemotePro KP 26 bit wiegand output keypads
Available in three different mounting configurations: post single gang or flush.
All single gang RemotePro KP models are available with a silver aluminum faceplate.
A heavy duty metal keypad is used with all exterior models providing years of trouble free entry.
Post mount models feature a stainless steel faceplate in a heavy metal powder coated enclosure with nightlight.

.......more details

21-14182

Transformer 120-240V 24VAC 20VA

120/240V Primary 24V Secondary 20VA 50/60 Hz
Same as K21-14182 used on L5 commercial operators

41A5021-I

LiftMaster Electronic Circuit Board Assembly ** Discontinued. No Stock Left

Assembly includes: Logic board end panel and light socket
For chain drive models with 2-lights
Fits 1265 Security + 390MHz
Also known as; 41A5021 41A5021-B 41A5021-C 41A5021-D 41A5021-E 41A5021-F 41A5021-G 41A5021-H

RADIO-KIT004

Manaras plug-in receiver for Board 70 operators 390 MHz

Direct ECB plug-in receiver card kit (RADIO-RE101C) for adding or replacing on-site.
Maximum 16 transmitters per receiver.
Compatible with transmitters RADIOEM101 and RADIOEM103 SD/MD