Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home Your Search Carwash
39165R

Genie Series II Wall Console

  • Three-function wall console with backlit panel that is easy to locate in the dark.
  • Sure-Lock mode allows you to lock-out the keypad and remotes for extra security at night or while on vacation
  • When Sure-Lock™ is ON and the garage door is in the fully closed position the powerhead cannot be activated by the wall console or a remote.
  • Same as GBWCSL2-BX
1003-6.5"-100FT

Bottom U-Rubber 6.5" Black 100' Long

  • 100ft spool of vinyl insert.
Z9003-MAX

Pusher Spring - 27" with 3" diameter Tip Sold as a Pair

  • Pusher spring 27" long with a large 3" tip. Sold as a pair
  • 11lbs of initial pushing strength per spring+ 3lbs per inch per spring
M3-2312

Marantec 2-Button Transmitter 315 MHz 97243/122436

  • Same as part # 65892 97243 122436
  • Includes battery CR2032
  • Made in Germany
Instructions
LA400-JB40

LiftMaster Junction Box w/Cable 40'

SSZP8-6

Solid Shaft 1" Keyed Zinc Plated 8'-6" (102")

RLC-K72

Miller Edge Light Curtain Non- Monitored 6ft

  • Light curtain made up of a series of thru-beam photo eyes designed to provide a dense barrier of protection for motorized or high speed doors.
  • Ideal for environments that require expanded protection for protruding parts that may not be detected by standard single-beam photo eyes mounted 6" above the floor.
  • Ideal for pre-2010 installations not requiring a monitored solution.
  • Ability to span up to 32' wide
  • Universal mounting brackets included
  • IP67 waterproof housing
    • .......more details
Installation manualsell sheet
365LMC

LiftMaster Universal Plug-in Receiver 315 MHz

  • Compatible with any garage door opener with a simple 2-wire dry contact
  • Includes 2-conductor bell wire
  • Able to accept 8 Security+ transmitters & 1 digital keypad
  • Compatible remotes; 893MAX 890MAX 892LT 373LM 371LM 374UT 375UT
Programming InstructionsInstructions de programmation
CHK-991

Chain Hoist Keeper

  • Chain hoist keeper is not the same as the chain keeper
R5201

Cast Iron Pulley 3"

  • Bored for 3/8" diameter bolt
  • Cable diameter: 1/8"
  • Cast iron pulley mounted on two pressed sealed bearings.
  • Radial Load: 400lb
RENO-B4

RENO 11-Pin Amphenol Style Connector 12-24V Single Channel Loop Detector *** To Extent of Inventory

  • The Model B is a full featured single channel dual output vehicle detector that incorporates the reliable vehicle detection technology found in all of Reno A & E s vehicle detectors.
  • All detector functions and settings are configured by using a set of eight internal DIP switches and a front panel mounted pushbutton switch
  • Dimensions: 11-Pin Models - 3.00 inches (7.62 cm) high x 1.75 inches (4.45 cm) wide x 4.30 inches (10.92 cm) deep
Installation manualSpec sheet
OSH-6113-M-N1-RH

Manaras Opera-SH 3/4HP 120V 1Ph Monitored Board w/N1 Eyes RH

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
    • .......more details
Installation ManualSell Sheet
D22

Allen Bradley 110V Reversing Contactor

4580-304-BLACK

Adseal DWS Weatherseal Silicone Adhesive Sealant 304ML Black *** To Extent of Inventory

  • 304ml cartridge
  • Ideal for movement and perimeters joints
  • Meets ASTM C920 S NS Class 50 NT M GA O
  • Meets AAMA 802 and 805 standards
  • Can be used on aluminum glass masonry some plastics painted and unpainted metals & does not yellow
  • Excellent resistance to UVs for indoor and outdoor use
    • .......more details
GH-343-1.5

Doorlec Industrial Jackshaft Door Operator 1.5 HP 460V 3-Phase

  • Custom-designed extra heavy-duty industrial-type electric door operator
  • Worm gear reducer 40:1 ratio
  • #60 roller chain and sprockets from operator shaft to door shaft.
  • Door speed: 7 inches per second (approx.)
  • Adjustable torque limiter
  • Rotary type limit switches
    • .......more details
7-6143

RW Door Snugger Zinc Plated Welded Chain

  • Bulit rugged with welded chain and lag bolts (included)
  • Used as a door pull to open and close
  • Fits most sliding doors
  • Quick latching
  • Locks tight and stays tight
  • Size: 1-1/2" x 15" long
    • .......more details
610.5600

Whiting Panel Option for 5600 HD Bottom Roller Brackets

  • This is an upgrade option when purchasing a door or bottom panel
B/CDJH-34-575-UL

Lynx CDJH Heavy-Duty Jackshaft 3/4 HP 575V w/ ECB and Solenoid Brake Right Hand UL325

  • 3 Button station (NEMA 1) Photoeyes 1-Btn Transmitter
  • 1650 RPM high starting torque motor with overload protection
  • Inherent Mechanical Brake (I.M.B)
  • B2 Mode C2 Mode D1 Mode E2 Mode T Mode TS Mode
  • On board Open Close & Stop for ease of setting limits
  • Pre-wired to accept sensing devices
    • .......more details
20111

Doorlec Cam Retainer Plate Springs *** Replaced by 26117

  • Works on GH/GHX
CAPXLV2MC

LiftMaster Smart Video Intercom - L

  • Designed for High-Rise Buildings and Gated Communities
  • For 50 to 50000 units multi-family buildings and garden style communities.
  • Perfect for any entrance and beyond with 4 Wiegand Input 4 OSDP Readers and 8 Relay Output to control doors gates or any other relay-controlled electrical system.
  • 10” HD touchscreen display fits in a surface flush or pedestal mount.
  • Wi-Fi** or ethernet for easier installation and connection to Cloud. 3rd party cellular modem can be used as well.
  • Wireless link to LiftMaster gate operators to eliminate the need for digging trenches at the gate.
    • .......more details
SOLARKPB

Erone Keypad and Multi-Technology Proximity Reader (125kHz)

  • The SOLARKPB is a black proximity card reader and keypad geared with a high performance read range
  • This device is equipped with Wiegand technology and gives visual feedback through its multi-colored LED’s.
  • Sealed in epoxy this multi-technology reader is compatible with most popular 26-bits Wiegand card encoding
L932M

LiftMaster 2-btn Keychain Remote Control MAX Security+ 3.0

  • Compatible with Chamberlain® LiftMaster® and most Craftsman® garage door openers manufactured after 1997 with safety sensors.
  • Up to 1300 ft. range (conditions permitting).
  • New and improved seamless set up.
  • Control up to 2 garage doors or gates.
  • NEW! Set up and manage your remote in the myQ app.*
  • Ultra-secure encryption.
    • .......more details
Installation ManualManual d'installationCompatibility Chart 2025Comparison Chart 2025
STEELCRAFT-TD134

SteelCraft TD134 Replacement Panel Special Order

  • Ordered to customer specs.
  • Price by quote only
114-0298

RW Support 18 x 33

  • Size: 18 x 33
  • Material: Formed Steel 3/16" thick
  • Finish Black Enamal
BCSI-PM04

Pivin Drapeau Gear Reducer in Synthetic Oil *** Price by Quote Only

TDC48-12

LiftMaster Trolley Chain Pack #48 700LBS 12ft Door

  • Chain pack only
  • TDC48-12 is a #48 Chain Pack Kit for 12 Ft. Trolley Rail Assemblies.
  • For use with LiftMaster® MAXUM TDC 700 Series Standard-Duty Trolley Commercial Door Operators; installed on 12' commercial doors.
LJH-353-1-RH

Doorlec 1 HP 575V 3PH Jackshaft Operator

  • Model LJH lasts an average of 10 million cycles
  • Available with ⅓ HP to 1 HP single-phase or three-phase motor and is equipped with self-adjusting solenoid brake
  • LJH installation is universal regardless of side (left or right)
  • Speed is approximately 1.4 feet per second or about 0.3 meters per second
  • Comes equipped with a manual chain hoist
CDJH-12-115-UL

Lynx CDJH HD Jackshaft hoist commercial operator 1/2 HP 115V with ECB UL325

  • New LX100 circuit board.
  • Built-in 3-channel 372 Mhz radio receiver accepts up to 20 remotes
  • 4L V-belt primary reduction #41 drive chain and sprockets.
  • Adjustable friction clutch Inherent Mechanical Brake included
  • Fully driven adjustable limit switches.
  • Heavy duty 3 button wall station (Open Close Stop).
    • .......more details
GAREX-WINDOW

Garex Thermos Made-to-Order Size Special Order

  • Special order to suit customer's needs
Z9959

Tension Release Hub Torsion Spring Back Winder

  • Safely back wind the torsion springs in tricky “slipped cable” situations
  • Easily slide and tighten the solid steel hub on either end of the torsion shaft to back wind the torsion springs using a 5/8" winding bar unwrap and re-install the cables on drum
  • Can be used on 1" solid or hollow shafts
CAPAC

LiftMaster Smart Access Hub

  • LiftMaster’s Smart Access Hub provides communities an affordable cloud-based option to monitor and control access points without needing to upgrade the entire system
  • Multiple-Entrance Control with myQ Community.
  • Flexible Connectivity Options - Ethernet Wi-Fi Cellular.
  • Universal Compatibility – Flexible connection options to control up to 4 access points (vehicle pedestrian amenity gates door strike or maglock).
  • Full Cloud-Based Management– For up to 50000 user and event history per unit.
  • Remote Programming and activity monitoring using myQ Community.
    • .......more details
IP-MONSQ

CDVI Interior Touch Screen Monitor for IP-MDS/IP-SDS Video Intercom System (Square)

  • Interior 7" touch screen TFT monitor for use with the IP-MDS/IP-SDS intercom systems in white.
  • IP system connects through the PoE system and also has a free to download app available on iOS and Android. The VDP app allows for users to connect with visitors at the door station and can control the door locks remotely.
  • Square shape (available in rectangular shape: IP-MON)
  • SIP Server
  • Operating temperature: -10C to 55C
  • Call recording and built-in memory
    • .......more details
LEDSTRIP004

LED Light Strip (1 Unit) Red/Green/Blue 96" 24VDC

  • An auxiliary output module is required enables connection of 24VDC LED light strips. MODKIT168A is an option
Installation Manual
CPT215-END-KIT-T3

Miller Edge End Kit for CPT215 Doide Capacitor (T3) Configuration

  • Kit contains: 2) Caps (2) cages (1) wired plug (1) diode capacitor plug (1) non-mon. plug (2) screws
MWT12B

Miller Edge Transmitter Binary Nema 4 Enclosure

  • The MWT12 safety edge transmitter is designed to provide wireless signal transmission form the safety edge to the motor controls.
  • It is easily mounted and wired to the gate or door edge sensor. When the sensing edge comes into contact with an obstruction a closed circuit signal is created and is sent to the transmitter.
  • The transmitter relays the information to the receiver and the receiver passes the signal along to the operator motor.
  • The gate or door stops movement and will then reverse the direction of travel.
  • Comes standard with a NEMA 4 weather-proof enclosure. The enclosure can be easily mounted with the four mounting holes and screws provided
  • Response time: 70 milliseconds
    • .......more details
Installation Instructions MWT12BSpec Sheet MWT12BFAQ MWT12B
DOCK-SEAL-R600

Dock Seal R-600 Adjustable Curtain Seal Price by Quote Only

  • Made to order - Price varies according to specifics
  • This model is ideal for door openings of 8′ wide x 10′ high
  • Standard Seals include two side pads with a fixed head pad and option for an adjustable head curtain.
  • 40 Oz Vinyl
  • Comes with full height yellow guide strips and option for wear flaps
  • Black Blue and Green are stock colors for other colors there will be a surcharge as well as longer production time
    • .......more details
R-600 Order FormCatalogueInstallation Instructions
42GRR-9002

Allen Bradley Series 9000 Photoelectric Sensor Thru-Beam Receiver Unit

  • nput: 70-264VDC/AC
GALV-283-2-L

Cut-to-Length Torsion Spring .283 x 2" Left Hand Wound Galvanized White Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
GSD103L5R

LiftMaster Heavy Ind-Duty Slide Operator 1HP 208/230/460VAC 3PH

GALV-406-6-144-R

Torsion Spring .406 x 6" x 12ft RH Galvanized Blue/Yellow

  • Wire size: .406
  • Inside diameter: 6"
  • Length: 12 ft
  • Galvanized Stenciled
GHW-383-1HP-RH

Doorlec Industrial Gear Head Door Operator 1 HP 208V 3P with ECB and Nema4 modification

  • Extra heavy-duty industrial-type electric door operator for damp environments.
  • Worm gear reducer 40:1 ratio
  • #50 roller chain and sprockets from operator shaft to door shaft. (#60 chain optional)
  • Door speed: 7 inches per second (approx.)
  • Adjustable torque limiter (also called friction clutch)
  • Rotary type limit switches
    • .......more details
233817

Operator Reinforced Bracket 18-24" Adjustable with Hinge Kit Galvanized

  • Also known as ARB or ORB brackets
  • Kit includes: 5/16" Clevis Pin Hitch Pin 1/4-20x5/8" Carriage Bolt 1/4-20 Serrated Flange Nut
  • Hinge : Male Hinge 13 GA WIDE SD (MATERIAL STEEL 13 GA)
OPH-6214-M-N1-LH

Manaras Opera-H 1 HP 240V 1Ph with Monitored Board and N1 Photoeyes Left Hand

  • A heavy-duty industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a self-engaging chain hoist for manual operation
  • Clearence: side room required 15"
GALV-295-258-R

Cut-to-Length Torsion Spring .295 x 2-5/8" Right Hand Wound Galvanized Blue Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
S50E-PAIR

LiftMaster Small Profile end kit for one edge only 8.2KOhm resistance

  • Fast easy to install and cost effective system no glue is required
  • One end for output wire other end with resistor for monitoring
  • Compatible with S50 Small Profile Edge
  • Includes: (1) set enough for one edge
  • p/n 1804-1463
343

Cable Clamps Galvanized 3/8" Sold per piece

  • Galvanized malleable cable clip
LDJ-CAP-48MFD

Doorlec Run Capacitor for LDJ RCR50-370

  • 370VAC/B 50 uf 50/60 Hz
  • CSC run capacitor
GALV-273-334-144-L

Torsion Spring .273 x 3-3/4" x 12ft LH Galvanized Orange/Red

  • Wire size: .273
  • Inside diameter: 3-3/4"
  • Length: 12 ft
  • Galvanized Stenciled
K75-17034

LiftMaster Heavy-Duty Straight Door Arm Assbly

  • For use with various LiftMaster® Logic 4.0/5.0 and DC MAXUM Industrial-Duty and Extended Duty Jackshaft Hoist Commercial Door Operators
BEA-10LIGHTBKT-TL

BEA Modular LED Signal Light Bracket

  • Bracket only for modular LED lights.
P-8833T-OCS

Pulsar 3-btn 1-Door O/C/S Transmitter 109372-Compatible 318 MHz

  • Open/Close/Stop remote for 1 door
  • Compatible with 3-channel Allstar and MVP receivers
  • Portable transmitter
  • Easy access to battery and coding switch
  • Power: 9-volt battery
  • Codes: 6561 (set by eight trinary dip switches)
    • .......more details
K20-3100M-5-H25

LiftMaster Electric Motor 1 HP 575V 3P L5

  • For use with various LiftMaster® Logic 5.0 Commercial Door Operators and Slide Gate Operators.
  • Also known as: 20-3100M-5 K20-3100M-5
PRO-EHJ-7583U-RH

Micanan 3/4 HP 208V 3PH Cont. Duty Jackshaft N1 Eyes Monitored ECB Right Hand

  • Comm / Ind Continuous Duty Belt Drive with Emergency Chain Hoist
  • 24V class 2 control circuit with 40VA transformer to protect against short circuit
  • On board receiver with antenna
  • External radio control terminal strip
  • Low friction powder metal limit cam nuts with fully adjustable rotary type limit switch assembly •Three button open-close-stop control station Nema-1
  • Continuous duty industrial motor with overload protection
    • .......more details
Installation Manual Specification Sheet
GALV-243-2-L

Cut-to-Length Torsion Spring .243 x 2" Left Hand Wound Galvanized White/Yellow Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
227967

Linear Door Arm Bent LCO75

Replacement Parts List
36350

Doorlec Reversing Time Delay 1.5 sec. 24VAC

  • In closing cycle door will stop for 1.5 seconds and reverse to fully open
1031-100

Whiting 2" Vertical Track 100" L

CRBH501L5-RH

LiftMaster 1/2 HP 115/230 VAC 1 PH Commercial Hoist Operator Logic 5 with Carwash Modification

  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door.
  • MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
  • Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.
    • .......more details
MYQ-SGC2WLM

LiftMaster Smart Garage Camera ***To Extent of Inventory

  • The LiftMaster Smart Garage Camera™ is compatible with all myQ connected garage door openers.
  • It works directly with all LiftMaster openers with the Wi-Fi logo and can work with most garage door opener brands manufactured after 1993 when paired with the myQ Smart Garage™ Hub(821LMB).
  • myQ Connected: monitor the garage through a live feed or recorded event using the myQ app.
  • Video camera begins recording when motion is detected.
  • Easy setup with Bluetooth and magnetic mounting base.
  • Enables secure in-garage delivery for Amazon Prime packages
    • .......more details
NIR-KIT

Emx Industries Retro Reflective Photoeye Sensor with Reflector and Hood (5200-K)

  • Watertight packaging
  • Detection range: 30 feet
  • 6 foot cord
  • Reflector Hood Bracket and mounting hardware Included
  • 2 LED indicators
  • Sensitivity adjustment
    • .......more details
BEA-10EAGLE

BEA Eagle Motion Sensor 6'-13' Mounting Height *** Replaced by BEA-10EAGLE-ARTEK

  • Designed for the activation of automatic pedestrian doors
  • Universally compatible with all makes and models of swinging sliding and revolving automatic doors
  • Eliminates False Detections: Immunity settings can be adjusted to reduce unwanted detections caused by rain snow and header vibrations
  • Versatile: Motion detection feature capable of detecting traffic moving as slow as two inches per second
  • Cable length: 8ft
  • Temperature Range -4 – 131 °F
    • .......more details
PHOTO-060

Manaras Non-Monitored Photoelectric Cells N4/12 & IP67 Retro-Reflective 39' Range incl 3" Reflector

  • Retro-Reflective photo cell
LM21AFCB

LiftMaster Advance Fire Control Release Device

  • UL 864 Revision 9 compliant.
  • 3 count obstruction cycling.
  • Selectable 10 20 30 or 60-second time delay on alarm.
  • Test key switch – Floor level testing.
  • Motor voltage sensing.
  • Form C relay output.
    • .......more details
VKP1-LM

LiftMaster MyQ Video Keypad

  • Create unique PIN codes and schedule access for family guests and service providers
  • Visual Confirmation: Get peace of mind by seeing that loved ones have arrived home safe and sound
  • Receive real-time notifications and view history of when the garage has been accessed by members of the household
  • Easy Installation: Enjoy wireless setup with a rechargeable battery and integrated Bluetooth® for fast Wi-Fi® provisioning
  • Call Button: Unexpected visitors can initiate 2-way audio communication with the myQ account owner to request access
  • Compatible with LiftMaster Chamberlain Craftsman AccessMaster and Raynor garage door openers made after 1993
    • .......more details
OTBH-6113-1-M-N1

Manaras Trolley Operator 3/4HP 120V 1Ph Monitored w/N1 Eyes

  • Heavy-duty low headroom trolley operator designed for use on industrial standard lift sectional door
  • 25 cycles per hour 80 cycles per day
  • It incorporates a drum-band type solenoid brake.
  • Tracks are an extra 36 lbs per track
  • 3/4 HP & 1 HP operators come with #41 full roller chain
  • Includes PHOTO-070
    • .......more details
OTBH-6112-M-N1

Manaras Trolley Operator 1/2HP 120V 1Ph Monitored w/N1 Photoeyes

  • The OTBH is a heavy-duty low headroom trolley operator
  • Designed for use on industrial standard lift sectional doors
  • It incorporates a drum-band type solenoid brake
  • 25 cycles per hour 80 cycles per day
  • 1/2 HP operators come with # 48 (410) roller chain
  • Includes PHOTO-070
    • .......more details
OPH-6113-M-N1-LH

Manaras Opera-H 3/4HP 120V 1Ph Monitored Board w/N1 Eyes LH

  • A heavy-duty industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a self-engaging chain hoist for manual operation
  • Clearence: side room required 15"
BTM-VB-3.25

Devanco Bottom Vinyl U-Rubber 3.25" Black 250' spool

  • 250ft spool of vinyl insert for sectional doors
  • low temp vinyl
  • perforations in the bottom to ensure that condensation escapes
  • Fits most standard bottom retainers
P-639T

Pulsar 3-btn 9-Door O/C/S Transmitter 318 MHz

  • Allstar compatible
  • Wall mount
  • OPEN-CLOSE-STOP 9 doors
  • 8 dipswitches 318 MHz
Programming instructions
50304

Doorlec Hoist Shaft Kit w/Disconnect Coupler

  • For models LJH LJHW
4580-304-CHOC/BRN

Adseal DWS Weatherseal Silicone Adhesive Sealant 304ML Chocolate Brown 458-19 *** To Extent of Inventory

  • 304ml cartridge
  • Ideal for movement and perimeters joints
  • Meets ASTM C920 S NS Class 50 NT M GA O
  • Meets AAMA 802 and 805 standards
  • Can be used on aluminum glass masonry some plastics painted and unpainted metals & does not yellow
  • Excellent resistance to UVs for indoor and outdoor use
    • .......more details
R1P

Erone Radium + Paradox 1-Channel Key Chain Transmitter 433MHz

  • Designed for the control of automatic closing systems and anti-burglar systems thanks to its very high security coding system (KeeLoq® Hopping code).
  • The code sent by the transmitter changes at each activation avoiding any scanning and copying risk.
  • A special algorithm allows to keep synchronized transmitter and receiver.
  • Range up to 250 m (820 ft)
  • Ergonomic rugged & durable
  • Battery: Two 3V lithium battery (CR2016)
    • .......more details
Wireless System Chart
PRO-SD-7511-U-LH

Micanan 3/4 HP 115V 1P Horizontal Sliding Door Op. ECB Monitored Left Hand

  • Designed for use on commercial / industrial sliding doors or sliding fire doors
  • External radio control terminal strip
  • 3-btn O/C/S control station Nema 1
  • #41 roller chain & sprockets on all internal drives
  • Heavy duty 5L v-belt
  • Solenoid brake standard
    • .......more details
C-20X14-134-W-OLD

Thermal Window 20" x 14" for 1-3/4" Cedo Original White Old Style

  • For 1-3/4" thick door
  • Old style with round screw heads
  • Glass Dimensions: 17-3/4" x 12-11/32"
  • Hole Size: 18-3/4" x 13-3/8"
  • Exterior Frame: 19-3/4" x 14-3/8"
K41-0239-000

LiftMaster Idler Sprocket Qty 2 INSL24UL

CT753L5

LiftMaster 3/4 HP 208/230/460V 3P Commercial Trolley Operator Logic 5 with Carwash Mod

  • Trolley low profile with brake
  • Suspended from the ceiling the operators are used on sectional overhead doors with standard lift.
  • T operators are directly attached to drive and control the door.
  • MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
  • Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.
  • This operator comes with the carwash modification already installed
    • .......more details
MA010

LiftMaster Gate Arm Bracket

  • Designed for use on all Mega Arm gate openers
  • Bracket will work with either right-hand or left-hand operation gate arm.
K20-1100C-2LP-H28

LiftMaster Electric Motor 1 HP 115/230V 1Ph Logic 5

  • Also known as: K20-1100C-2LP 20-1100C-2LP
  • For use with various LiftMaster® Logic 5.0 1-Phase Industrial-Duty Commercial Door Operators
  • Includes wiring harness
CAPXM

LiftMaster Smart Video Intercom

  • LiftMaster’s cloud-based video intercom for multi-tenant residential properties.
  • The intercom allows residents to see their visitors through live video and grants access to the building via the MyQ app
  • Display and interface – 7” color display with touchscreen
  • Connectivity – WiFi cellular wired high-speed DSL
  • Audio capabilities – Voice over IP – digital call quality with no long-distance charges
  • Video capabilities – One-way video calling with a 135-degree view
    • .......more details
BNC-M-F

BNC Adapter Male to F-Type Female Connector ** To Extent of Inventory

  • BNC male to F female connector
  • Designed for RG6 coaxial cables RG59 security camera etc.
  • Made of nickel-plated and gold plated contacts for better corrosion protection
C-34X16-134-W-G/T

Thermal Window 34" x 16" for 1-3/4" Door White Frame Grey Tint Glass

  • For 1-3/4" thick door
GH-311-3/4

Doorlec Industrial Gearhead Door Operator 3/4 HP 115V 1-Phase

  • Extra Deavy-Duty Gearhead Industrial Operator or large Sectional or Rolling Steel Doors
  • DC-2000 Logic Board with adjustable Timer To Close Delay On Reverse and Traffic Light Control
  • Worm gear reducer 40:1 ratio for high-torque and long life
  • Solenoid Disk Brake Prevents coasting and secures the door when closed
  • TEFC (sealed) continuous-duty electric motor with overload protection
  • Optional Friction Clutch available
    • .......more details
B/CDJH-12-115-ECB

Lynx CDJH HD Jackshaft with Solenoid Brake 1/2 HP 115V with ECB UL325

  • New LX100 circuit board.
  • Built-in 3-channel 372 Mhz radio receiver accepts up to 20 remotes
  • 4L V-belt primary reduction #41 drive chain and sprockets.
  • Adjustable friction clutch Inherent Mechanical Brake included
  • Solenoid brake optional **
  • Fully driven adjustable limit switches.
    • .......more details
STATION086

Manaras 3-btn Push-Button Control Station Nema 1 Flush Mount

  • 2 N/O contacts and 1 N/C contact for stop.
  • Flush mount.
684-33-102

Universal Bracket 2.25" x 2.5" x 144" w/ Plate 12"x12"

ME110-M-2W-BLK-E

Miller Edge Monitored 2-Wire Black End Outlet 7/8" wide x 3/4" high Sold by the Foot

  • Electromechanical slide in edge for counter shutters rolling doors and barrier arm applications.
  • Touch sensitive signaling that allows for immediate stopping and reversing of motion.
  • Temperature range -30F to 155F
  • Lead wire: 22 gauge universal
  • Sensitivity: nominal 6-8 PSI
  • 2 wire NO configuration
    • .......more details
Worksheet
1184HD

Whiting Hold Open Device 1184 Heavy-Duty Track Mount

  • This is a field install accessory.
  • Also known as: Positive Stop Assembly
  • This is installed onto the panel when the door is opened it is engaged and will keep the door open above the header so there is no hang down of the door.
  • The door will stay open above the header to eliminated the door being damaged.
ETBH-311-1/2HP

Doorlec 1/2HP 115V Trolley Door Opener with solenoid brake

  • Trolley model heavy-duty door operator designed to provide smooth dependable operation of sectional overhead type doors.
6200-2-4-SEALED

Roller 6200 Sealed Bearing 2" White Nylon 3.48" Short Stem

  • 2" diameter white nylon tire
  • 6200 sealed precision bearing
  • Zinc plated 4.56" Overall length 3.48" stem
  • Rating: 100lb; 100000 cycles of a 12′ door
GUK-BX

Genie Universal Wireless Keypad 41249R

  • Works with most major brand garage door openers. Compatible with Genie Intellicode (rolling code) Genie 12 and 9 switch systems going back to 1988.
  • Also compatible with Overhead Door Chamberlain Craftsman LiftMaster Wayne Dalton Linear Megacode Xtreme Garage Ryobi Sommer and Marantec. •With the Genie Universal Keypad you can control a combination of up to 3 different garage door openers. Each of the 3 openers can be programmed individually of the others so having multiple brands of openers controlled by a single keypad is not a problem.
  • Powered by two triple-A batteries (AAA)
OWL

EMX Microwave Motion & Infrared Presence Sensor

  • The OWL is a vehicle motion and presence sensor that uses microwave and infrared technology to activate automatic doors and industrial gates.
  • Featuring two configurable outputs vehicle motion detection as well as presence detection the OWL activation sensor will ensure the safety of people and goods.
  • Mounting Height: 11.5-21.3 ft (3.5-6.5 m)
  • Supply Voltage: 12-24 VDC/AC
  • Dimensions: 9” (229 mm) x 5” (127 mm) x 5” (127 mm)
  • Connections: 32 ft (10 m) 8 conductor cable directly from sensor
    • .......more details
ManualSell SheetQuickstart Guide
BK027/PR

Commercial Bottom Bracket 1-3/8" 2"or 3" Inside Hook Up BB-4 Sold as a Pair *Includes (1) Right and (1) Left Bracket (2) Clevis Pins (2) Cotter Pins*

  • Includes 1 left and 1 right hand bracket
  • BB-4 SF
HDSW24UL

Liftmaster Heavy-Duty Variable Speed Swing Gate Op. 24VDC Heater Not Incl.

  • Includes safety device LMRRUL Monitored Retroreflective Photo Eye enhanced retro-reflect
  • Features battery backup that provides up to 45 cycles or 120 days of standby power
  • Smooth Start/Stop Operation and mid-travel reversal extend operator and hardware life.
  • Heavy-Duty Commercial Gear-Driven Transmission provides unsurpassed reliability.
  • myQ® Technology enables you to securely control and monitor your gate operator from anywhere
  • Security+ 2.0® safeguards access with an encrypted tri-band signal to virtually eliminate interference and offer extended range.
    • .......more details
02-406-1T

LiftMaster Replacement Switch Key 1 only

  • Replacement Switch Key.
  • For use with various LiftMaster® Commercial Door Operators
GDI-UL325-EYES

GDI Photo Eyes for Monitored Operators N4

MOD065B

Manaras Trolley Hoist #41 Brake Release Kit Includes 12' Shaft

  • Chain hoist for manual hand operation of standard lift doors equipped with trolley operators.
  • The 1" cross-header shaft (12' long) drives the front idler of the drawbar
  • For use with operators with #41 chain
  • When applicable it incorporates an electric cut-out and brake release cable
  • Hand chain for 14' high door is standard
  • Hoist assembly width is only 8.5"
    • .......more details
WA11

NICE Adjustable Stand for L & M BAR Gate Op

  • Adjustable stand for the barrier arms of the M-Bar & L-Bar barrier gate operators
  • Attaches to ground and provides support when arm is down
MM00139

Micanan N-4 Cable Entry Tube

  • New tubes are plastic
CDJH-34-115-CON-R

Lynx CDJH Heavy-Duty Jackshaft 3/4 HP 115V Contactor Right Hand

  • 3 Button station (NEMA 1)
  • 1650 RPM high starting torque motor with overload protection
  • Inherent Mechanical Brake (I.M.B)
  • B2 Mode C2 Mode D1 Mode E2 Mode T Mode TS Mode
  • On board Open Close & Stop for ease of setting limits
  • Pre-wired to accept sensing devices
    • .......more details
65-92131

LiftMaster Dual Aux Trolley Mod. M15 #41 Chain for 12ft High Door

  • Provides drawbar-type operation on very wide (over 22 ft) standard lift sectional doors where a side-mount op. is preferred over a drawbar op.
  • Includes up to 12ft of tracks
  • For H/J/GH