Devanco Canada - Get The Right Garage Door Opener‎ and Parts

Z9998

Hand Chain 26' for Torque Force Chain Hoists SAE 1008 Zinc Plated

Works with all Torque Force Chain Hoists

K75-12492

LiftMaster Brake Kit 115V Units MH

MWTA12

Miller Edge Transmitter with Audible Alarm Small *** No Longer Available

The MWTA12 safety edge transmitter is designed to provide wireless signal transmission form the safety edge to the motor controls.
It is easily mounted and wired to the gate or door edge sensor. When the sensing edge comes into contact with an obstruction a closed circuit signal is created and is sent to the transmitter.
The transmitter relays the information to the receiver and the receiver passes the signal along to the operator motor.
The gate or door stops movement and will then reverse the direction of travel.
Comes with an Audible Alarm feature that activates when the battery is running low and needs to be replaced.
Comes standard with a NEMA 4 weather-proof enclosure. The enclosure can be easily mounted with the four mounting holes and screws provided.

.......more details

Installation Manual Sell Sheet

H031

Rolling Steel Slide Bolts and Holder Fire Door

2KW

Rolling Steel 2" Curved Continuous Windlock

Windlocks are especially used on rolling steel doors and shutters to prevent "blow-ins" from severe storms or winds.
A wind lock is a small metal device that is attached to each slat.
Its primary function is to reduce the amount of friction that occurs between the actual door & the guiding panel.
When the wind is strong the roller door may be dislodged bent or misaligned from the guide.
With a windlock your door can operate efficiently despite wind load or pressure.
Windlocks are easy to add on to any existing rolling steel or shutter door

.......more details

2G-RIGHT

Rolling Steel 2" Curved Stamped Endlock Right Hand

Endlocks are riveted to curtain slats ends of every other slat to prevent slats from shifting laterally and to prevent curtain wear in guides.
Continuous endlocks are at both ends of every slat.
Rivets included with endlocks

.331-6-RH-C

Torsion Spring .331 x 6" x 144" RH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .331 ID: 6" Length: 12 ft

.319-2-5/8-LH-C

Torsion Spring .319 x 2-5/8" x 144" LH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .319 ID: 2-5/8" Length: 12 ft

.250-1-3/4-RH-C

Torsion Spring .250 x 1-3/4" x 144" RH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .250 ID: 1-3/4" Length: 12 ft

.225-1-3/4-RH-C

Torsion Spring .225 x 1-3/4" x 144" RH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .225 ID: 1-3/4" Length: 12 ft

.192-1-3/4-RH-C

Torsion Spring .192 x 1-3/4" x 144" RH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .192 ID: 1-3/4" Length: 12 ft

44-60-240

Extension Spring 10' Door - 240 lbs Silver ** By Quote Only

Clipped ends
44" long 60" stretch 240 lb load

CPS-MEI

LiftMaster Electric Edge Card **to extent of inventory

The CPS-MEI is an interface for a monitored 2-wire edge that can be used in place of photo eyes and meets the monitored requirement of UL325-2010
Same as Miller Edge SM-102

BOARD066R

Manaras Replacement Power Board ***No Longer Available

Used on all Manaras circuit board type operators

Installation Manual Manuel d'installation Replacement Chart Guide de remplacement

MK00650

Micanan UPCHARGE for N-4 Photocells in Lieu of Nema-1 Reduction for N1 Included. **Obsolete Repl by MK00697

In lieu on the standard Nema-1 photocells supplied with the operator

Installation Manual

MB-02001

Micanan Electric Motor Only 3/4HP 110/220V 1PH

Base Mount motor O.D.P. FR56
Used on Micanan's T TB APT J EJ H EHJ HHD & SD

69C

Skylink 1-Button Universal Keychain Remote *** NLA

It's small enough to carry in your pocket or purse
The 69C is a great universal remote and it is compatible with almost any garage door up to 2007 (see compatibility chart for exact brand names).
It has just one simple button and a unique keychain attachment which makes it ideal for use with convertibles motorcycles bicycles or any other vehicle without the usual sun visor.
It connects to your garage door using a series of DIP switches making it simple to program it even if your garage door dates as far back as the 1980s.
Model 69c is not compatible with Stanley "Securecode"
Compatible frequency: 390/318/315/310 Mhz

.......more details

Compatibility Chart

SPR41B12X1

Sprocket 41B12 1" Shaft 1/4" keyway 2SS 5/16"

K22-36899

LiftMaster Single Phase Brake Solenoid L5

4-wire connector for single phase
120 volts on terminals 1 & 2 (closest to the plunger)
240 volts on terminals 3 & 4 (farthest from the plunger)

Wiring diagram

71-B575-1

LiftMaster Internal Brake Kit 575V 3PH for L5 Operators

Complete with: Brake hub kit Brake release lever Brake disc Spring cup Studs Compression springs Brake solenoid Solenoid cover Spacers Mounting plate Pressure plate Feather key and Conduit
Can be replaced in-field

Instruction Manual

MOD074

Manaras Hand Crank Modification

For manual operation with a hand crank instead of a chain hoist.
Hand crank hook and eye outlet is supplied.
A 5/8" rod or pipe (SHAFT002) is required but not supplied
SHAFT002 should be ordered separately and desired cut-to length specified at time of order.
This modification is also available for in the field upgrade - see MODKIT074
This modification applies to OGH and MGH operators

.......more details

OGH-6233-ECB

Manaras 3/4 HP 208V 3Ph Gear Head Operator with Elect. Circuit Board

A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
Includes a self-engaging chain hoist for manual operation
25 cycles per hour 80 cycles a day
Hoist on right side standard can easily be moved to the left in field
Full overload protection
BRACKET112 must be used for wall mounting

.......more details

Installation Manual Sell Sheet

CLUTCHPAD008

Manaras Clutch Pad 1" ID 4" OD

Replaces CLUTCHPAD002

SETMCIC9V

Erone 1-Channel Wireless Module 433 MHz

You can replace the battery with a power supply by removing the SETMC1C9V battery adapter and connect the red (9V) and black (0V) wire into power supply
Connect a door contact motion detector or any relay activated devices to the SETMC1C9V it will communicate their status wirelessly
Works with any 433 MHz Erone receiver

Wireless System Chart

24701R

Genie Chain Drive Dog Limits 3-PKG

Replacement limits for older model Genie Chain Drive openers with steel T-Rail assembly
Replaces the clip-on limit switch
Limit dogs external rail-mounted limit switches

20386R

Genie Sequencer Board AC Screw Drive

For Genie Screw Drive garage door opener models: PRO95 CM8600 CM7600 Series II ISL950A IS550
Replaces part number 31184R

33950R

Genie Up Limit Switch Assembly 66 " Wire

For use on 7'6" rail assemblies.
For Genie Excelerator models and Overhead Overdrive models
Open / Up magnetic limit switch

6062

Programmable Timer *** To Extent of Inventory

12VDC or 24VDC operation is selectable
Functions include: One shot Delayed release Delayed operate Delayed pulse and Pulse / Flasher.
Momentary relay activation at the end of a desired timing cycle eliminating the need for having to use 2 timers to achieve this function
LED indicates relay is energized
Form C relay contacts are 8 amp at 120VAC / 28VDC

Installation instructions

MOD021A

Manaras Safepack 24V Control Circuit

A safepack module is used as an "Intrinsically Safe Barrier Relay" and in hazardous locations with non-voltage producing sensors allowing the user to use a N.O. non-monitored sensing edge.

860LM

LiftMaster Universal Weather Resistant Receiver

Weather-resistant for outdoor mounting requirements
Provides convenient access to gated communities industrial facilities and commercial sites all with a single transmitter solution
Three channels provide expanded remote control capacity: Channel 1 - 50 remotes Channel 2 - 20 remotes Channel 3 - 20 remotes
Multiple remote control options available to provide secure access from the safety and convenience of a vehicle
Compact design fits most gate and commercial door operators
Compatible with 811LM 813LM and all MAX remote controls

.......more details

Programming Instructions Instructions de programmation Sell Sheet

IPAC

LiftMaster Internet Enabled Outdoor Access Control System with VoIP Technology

LiftMaster® IPAC (Internet Protocol Access Control) is the first Internet-enabled outdoor access control system with Voice-over Internet Protocol (VoIP).
By harnessing the power of a high-speed connection IPAC’s innovative technology allows you to work smarter and more efficiently and its contemporary design features a durable enclosure which enhances your property’s image.
Make updates 24/7 through an IP address (no software to install) so you never have to take IPAC offline.
Manage resident info from any browser on your LAN so you do not physically visit the unit.
VOIP technology eliminates long distance fees and will be replacing old analog phone lines.
50000-resident capacity so you’ll never run out of system memory.

.......more details

Installation Manual Sell Sheet

MK-00719

Micanan Replacement Antenna for On-Board & External Receiver

Approx. 8" long

T755L5

LiftMaster 3/4 HP 575V 3p Commercial Trolley Operator Logic 5 ***No Longer Available

Low profile trolley operator with brake included

Installation Manual Manuel d'Installation Sell sheet Brochure

775

Fasteners Hex Head Bolt 1/4-20 x 3/4" 1000/Box

1/4" bolt has 7/16" head
Max torque = 6
Full thread

Q400MAU

LiftMaster Relay Module

EBOX-HHD-7511-R

Complete Control Box for PRO-HHD-7511 with Mechanical Contactor and Timer to Close

99552NYHNG

Nylon Hinge Black #2 *** To extent of inventory

Equivalent to 14-ga in strength

APT501L5

LiftMaster 1/2HP 120/230V 1Phase Commercial Trolley Operator Logic 5 *** No Longer Availble

APT-style operators employ an auto-reconnect trolley with nylon inserts and a resilient-mount motor for quiet operation.
Suspended from the ceiling the operators are used on sectional overhead doors with a standard lift.
APT operators are directly attached to drive and control the door.
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.

.......more details

Installation Manual Manuel d'Installation Sell sheet Brochure

36-RWB-PAIR

Winding Bars Round 36" Set of 2

Cold rolled hardened steel.
Machined to 1/2" at one end with 5/8" outside dia. on the other.
Sold as a pair.

CH505L5-RH

LiftMaster Hoist Op. with Carwash Mod. 1/2 HP 575 VAC 3 Ph Logic 5 Right Hand

Industrial Duty Hoist Operator with Damp Environment modification.
Comes with CPS-UN4 photoeyes

Installation Manual Manuel d'Installation Sell sheet Brochure

CH501L5-LH

LiftMaster Hoist Op. with Carwash Mod. 1/2 HP 115/230 VAC Logic 5 Left Hand

Industrial Duty Hoist Operator with Damp Environment modification.
Comes with CPS-UN4 photoeyes

Installation Manual Manuel d'Installation Sell sheet Brochure

17-6014

LiftMaster Motor Pulley 5L 5/8" ID x 2" OD

Fits model H operator with Logic 5
5/8" ID x 2" OD

K72-14130-1

LiftMaster Limit Shaft Kit H J and HJ Logic 3 Logic 4 and Logic 5 commercial operators

For models H J and HJ Logic 3 Logic 4 and Logic 5 commercial operators
Kit includes: Limit shaft Limit nuts Limit bearings Limit sprocket Interrupter cup Shim washers Compression ring Roll pin and E-rings.

K72-12515-1

LiftMaster Limit Switch Kit

For models T H Logic 5 and various L3 L4 commercial operators
Also known as: K75-12515-1 K75-12514

K001D8075-1

LiftMaster Logic Board - L5 ** USE K001D8395

14D1279E

Programming Instructions Instructions de programmation

178B35

LiftMaster Curved / Bent Arm Kit (41B0035B)

Will work with most residential garage door openers
Also known as: 4178B0035B 178B32 41B0035B 4178B35 178B35 012385990357 178B35B

71B240G

LiftMaster Brake Kit 230/240V with Solenoid Field Install SL585 and SL595

Instruction Manual

41A3150

LiftMaster Terminal Block with Screws

For model 8355
Same as 041A3150

71B120G

LiftMaster Brake Kit 115V with Solenoid Field Install SL585 and SL595

Instruction Manual

7001-9-CREAM

Commercial Side & Top Weather-Strip 9' Long - Cream (C)

Cream galvanized steel with cream dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.
Also known as Almond
Full case quantity only (20)

75-10170

LiftMaster Trolley-Slider Assembly (08-10169)

For LiftMaster trolley models MT T GT
Also known as: 307085008 75-10170 08-10169 085008 7510170

41AC175-2

LiftMaster Electronic Circuit Board Assembly

For Sears / Craftsman garage door opener

AIRSWITCH007

Manaras Exterior Adjustable Air Switch SPDT

To be used with metal case part # AIRSWITCH008

D111904

Mitto B RCB02 2-Channel Transmitter

Compatible with Lux 2B gate operator

CONSD24V

Reversing Contactor Struthers Dunn 24V

Struthers-Dunn # A275KXX90

MV-00023

Micanan 1-Door O/C/S Transmitter CT-1 313 MHz

Programming Instructions

71-65WTC

LiftMaster Weatherproof Case

Optional weatherproof case suited for 412LMC 422LMC and 423LMC
Measurements of the interior: W=5.75" L=7" D=3"
Measurements of the exterior: W=7" L=10" H=3.5"

580LM

LiftMaster Alternate Power System RJO Interface

Exclusively for use with Wall Mount Opener model 8500
Makes installing the Wall Mount Opener model 8500 easier when an outlet is not available within 6 feet
Puts power right where you need it and removes the need for an electrician
UL-approved
Includes transformer box interface box 35 feet of low-voltage wire and all required mounting hardware

Installation Manual Manuel d'Installation

41A7619-5

LiftMaster Cover for 8355

CLUTCH-SHAFT-AS

Lynx Complete Clutch Shaft Assembly for HDC Operators 3/4" x 17-1/2"

Fits all HDC operators - waterproof or not.

2704.177_270

Whiting Roadside Torsion Spring 2-3/16" ID 27" Long

Torsion spring wire only
.177 wire size

CR-2149

Universal Photocells

Will work with all major brands of residential openers including: Chamberlain Liftmaster Craftsman Overhead Stanley Wayne Dalton Linear Raynor and Moore-O-Matic
The self programming feature allows you to simply hook up to the existing wiring
Suggested replacement for Stanley 49522 - must cut black wire

Installation Manual

2598

Aluminum 5/16" Cable Eyelet

For use on Whiting dry freight and refer doors
Use with 1/8" stainless or galvanized cable

36163R

Genie Dual Frequency Intellicode Receiver 315 MHz & 390 MHz

For Genie Intellicode Rolling Code remotes Or Overhead Door Code Dodger remotes using the 315 or 390MHz frequency.
24-Volt 3-Wire Connection For Garage Door Opener And Gate Openers.
Accepts Up To 8 Genie Intellicode Or Overhead Door Code Dodger remotes on 315 or 390MHz Frequency. Note: Will not work with the older code switch type of remotes.

78236

Marantec Modular Receiver 315 MHz ***available to extent of inventory see details***

Only available in 315 MHz. Be sure to check which frequency is required
Works with Marantec residential opener models 4500e 4700e 4900e
Replaced by 75424 plug-in receiver

MU22-2WIRE-RH-Y

Miller Edge MU22 2-Wire Right Hand Yellow - Sold per Foot

��Electromechanical edge for sectional doors and aircraft hangars. •The MU22 is a custom edge manufactured to exact specifications. •The MU22 is completely flexible and will contour to curved surfaces. It's profile can also be square rectangular or angled. •Touch sensitive signaling allows immediate reversal or stopping of motion. •Temperature range: -30F to 155F •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •Vertical or horizontal mount •ANSI/UL325 recognized component •One year warranty

Installation Manual Worksheet Sell Sheet

ARK

LiftMaster Auto Reconnect Trolley Kit

Installation Manual

41AC050-2

LiftMaster Electronic Circuit Board Assembly 315MHz

Fits 3265 PD612C
Replaces 41AC150-2 (board only - need to install on exisiting panel)
Also known as 41AC050 41AC050-2M

28-30015

Truck Door 1" Vertical Track with Holes 93.5" for Todco Roll-Up Doors

Galvanized steel 14 gauge construction
Holes drilled to allow for faster plug weld installation to frame
For use with 1" rollers

36190T.S

Genie Control Board 3-Terminal *** DISC..

Fits the Legacy overhead model and the PMX500 model and is compatible with:
696CD/B
Genie PMX/B Model PMX500-IC/B
Model 496CD/B
GCG & GCG-L Series e.g. GCG350 GCG350L
PCG & PCG-L Series e.g. PCG400 PCG450L

.......more details

02-401

Push Button Control Station 1-Button Surface Mount NEMA 1

Die-cast metal enclosure
START may be used as OPEN with all LiftMaster operators.
May be used as OPEN and CLOSE on all operators with type B2 control wiring

SPREADER002

Chain Tensioner for 1" / 1-1/4"

Chain spreader for installation with 1" operator shaft and 1-1/4" door shaft
Designed to keep tension on the chain when used with a wall mount commercial operator. It helps avoid premature wear on the door shaft bearing and commercial operator output shaft bearing

Installation instructions

BK150/PR

Residential Bottom Bracket BB-100 sold as a pair

For use with 2" rollers
Works on 1-3/8" 1-1/2" 1-3/4" and 2" doors
13 gauge residential bottom bracket that secures to the bottom of the door allowing the cable to be attached to the door for lifting
Same as part number 263

OMNI-EXB

LiftMaster Relay Module

104078

Allstar Wireless Keypad 9931-WKE 318 MHz ** To Extent of Inventory

Compatible with Allstar and MVP receivers
4-digit access code
Backlit keys
Operate LED
Power: 9-volt battery
Codes: 19683

.......more details

Programming Instructions

T-833-C-OCS

Allstar 3-btn 3-Door O/C/S Transmitter 109025-311 MHz****NLA

Open/Close/Stop remote for 3 doors
Compatible with 3-channel Allstar and MVP receivers
Portable transmitter
Easy access to battery and coding switch
Slide switch selects door to operate
Power: 9-volt battery

.......more details

Programming Instructions

MK-00493

Reversing Contactor Telemecanique 24V Coil (MK-01179)

Same as MK-01179

MDKP

Linear MegaCode Exterior Wireless Keypad 318 MHz

MDKP can transmit a unique signal for each 1-6 digit PIN code entered.
It has a built-in radio transmitter with a 250-foot range in line-of-sight conditions.
Access codes are programmed into the access controller or receiver the maximum number of codes possible depends on the receiver model used.
Features Include:
Internal antenna
1-6 digit PIN for each user

.......more details

Installation Manual

PRO-W_MOD

Micanan Nema 4/12 Modification

This modification provides a TEFC motor N4/12 watertight/oiltight control enclosure waterproof drive and limit chain NEMA4 thru-beam eyes and a watertight/oiltight three-button station.

821LM

LiftMaster MyQ Garage Universal Smartphone Garage Door Controller

Enables smartphone control of most major brands of garage door opener with photoeyes.
Includes Wi-Fi hub and door sensor

Installation Manual Manuel d'Installation Sell Sheet Brochure

3-42-2A

Bottom Bracket with Removable Roller Carrier Commercial 3" 1-Hole BB-6 Pair *** To extent of inventory

Sold as a pair (1-left and 1-right)
11-guage
Dimensions: 4-1/2" W x 11" H x 1-3/8" D

.273-2-L

Cut-to-Length Torsion Spring .273 x 2" Left Hand Wound Orange/Red

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

02-111

LiftMaster Pull Switch Assembly *** Available to Extent of Inventory

Swivel end
Nema 1
Same as Pull Cord

.207-134-L

Cut-to-Length Torsion Spring .207 x 1-3/4" Left Hand Wound Brown

Priced per inch - cones sold seperately
For factory installed cones use part no. C-134-INSTALLED

CPS-N4

LiftMaster Nema 4 Commercial Protector System Photo-Eyes with Interface box

Commercial Through Beam Photo Eyes includes:
50-15514 I/R Emmitter
50-15515 I/R Detector
77-16011 Hardware Kit N4-CPS
001C4629 CPI Housing Assembly
Receiving Eye - A: 50-50997 Sending Eye - A: 50-50998

.......more details

Installation Manual Manuel d'installation

855LM

LiftMaster HomeLink Repeater Kit

This kit contains a repeater and a transmitter
The HomeLink repeater is only compatible with HomeLink equipped vehicles

Programming Instructions

387LMC

LiftMaster Universal Wireless Keyless Entry

Universal Keyless Entry works with garage doors made by LiftMaster Genie Stanley Overhead Door Wayne-Dalton Craftsman Chamberlain and Linear/Moor-o-Matic.
Single manufacturer/single frequency design – you pick the manufacturer and frequency for the garage door you want to open
Wireless – powered by one 9V battery (included)
Weatherproof slide-up protective cover
Open or close the garage door without using a remote
Backlit keypad

.......more details

Programming Instructions Instructions de programmation Sell Sheet

71-199010

LiftMaster 12' Sash Chain Pack with Keyring

Common disconnect chain

.283-258-R

Cut-to-Length Torsion Spring .283 x 2-5/8" Right Hand Wound White

Priced per inch
For factory installed cones priced seperately - use part no. C-258-INSTALLED

NX21

Allen Bradley 24V Reversing Contactor

Allen Bradley no. 104-C16KJH22-X6
Cat no. 100-C16*10

HD-15

Reflector Hood for 3" Round Reflector

Black/Charcoal

L0172-092

Low Temperature Grease 10oz Tube

Lubriplate multi-purpose low temperature grease.
Excellent cold operating characteristics

PMT20KIT

Carlo Gavazzi PMT20RI & PMT20I Thru Beam Kit

Suitable for exterior applications NEMA 4
Multi-supply voltage 12-240VDC 24-240VAC
LED indication for power supply and target detected
Not recommended for carwash applications
Operating temperature -25 to +55 C
Terminal 5 Common "NO" on Terminal 4 "NC" on Term. 3

.......more details

Installation Manual

CPS-UN4

LiftMaster Commercial Protector System Thru-Beam Eyes NEMA4

Waterproof photoeyes.
for direct connect to operators with Logic boards. L3 L4 L5
Receiving Eye - A: 50-50997 Sending Eye - A: 50-50998
These eyes will also work on the Micanan UL325 monitored operators

Installation Manual Manuel d'Installation Sell Sheet

355LMC

LiftMaster Universal Radio Control Receiver 315 MHz **NLA

Over 100 billion possible codes makes it impossible to duplicate the frequency
Jumper option for momentary or constant relay contact
Specifically for use with most 3-wire systems without a transformer
Accepts up to 8 Security+ remote control codes and one keyless entry
Will work with LiftMaster Sears Craftsman or Chamberlain remotes with the purple learn button (ERT format)
Will work on 2 or 3 wire systems. If your system is 2-wire a 24-volt 85LM transformer is required

.......more details

Programming Instructions Instructions de programmation

AW-14

Miller Edge Air Wave Switch in ABS Box

Air pressure is lead via a hose or pipe to a diaphragm contact. This contact converts the positive or negative pressure into an electrical contact and pulse.
Molded enclosure
Applications: commercial sectional doors rolling doors and mass transit
Works on doors up to 60ft
Can be used with standard pneumatic hose and Miller Edge extrusion
Sensitivity: 2mm to 500mm

.......more details