Devanco Canada - Get The Right Garage Door Opener‎ and Parts

PRO-GT-10081-U

Micanan 1HP 208V 1P Worm Gear Trolley Operator N1 Eyes Monitored ECB

ALUM-507

Aluminum 24" x 100' Spool Tan / Tan # 507

20% thicker than the aluminum sold in retail stores (0.022" )
Gentek # 507
Reverse side is #431 Bright White

Colour chart

K29-FDCL-500CCB

LiftMaster FDCL Receiver Logic Board with Battery Rev 500

Replacement kit charging circuit board firmware and battery for FDCL

LM4AH-12

LiftMaster Battery 4.5AH 12VDC

Designed to fit Fire Fly III Plus Model of Release Device
12 Volts 4.5 AHR (amp hour rating)
Dimensions: 4" Depth 2-3/4" Length 3-1/2" Wide

PRO-T-5038-U

Micanan 1/2HP 380V 3P Trolley Operator N1 Eyes Monitored ECB

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#410 roller chain on 1/2 HP models
Monitored board
On-Board receiver holds up to 20 transmitters

SC-6

Wheel Chock SC-6 Aluminum **** NLA

Excellent Surface Grip on Tire and Ground
Lightweight Aluminum
Size: 6" wide x 6-1/2" long x 6" high

88-8

Wheel Chock 88-8 Laminated Rubber Galv. Steel Sides

Fabric Reinforced Tire Rubber
Galvanized Steel Sides
Size: 8" wide x 8" long x 8" high

42GRR-9001

Allen Bradley Series 9000 Photoelectric Sensor Thru-Beam Receiver Unit

nput: 20-40VAC 10-55VDC 4VA

2528.093

Whiting Dual-Spring Shaft 93" for Whiting Roll-Up Doors

Constructed of 1" outside diameter heavy-duty steel tubing
Holes pre-drilled
For Whiting balancer #2376

MX00164

Micanan VFD Transformer Panel Mod. 575V pri / 230V sec (MX00216)

The primary power is connected to the transformer panel and 230V from the transformer panel gets connected to OMC VFD operator

R5212

Pulley 5" Zinc Plated Clevis Pulley with Strap ** To extent of inventory

15475

Doorlec Heater Strip 250 W 208/230 V

HRB-10

High Riser Bracket for 7" Above Dock or Higher 10"

High Riser 10" Riser Bracket for 7" Above Dock Door or Higher
Also available with 2" 3" & 4" Extensions or with Cutout - Call for More Information

SRB-4

Standard Riser Bracket 4" Above Dock

Standard 4" Riser Bracket for 6" Above Dock Door or Less
Also available with 2" 3" & 4" Extensions or with Cutout - Call for More Information

Specification Sheet

STRUT-2-1/4-14'-NH

Door Strut 2-1/4" Non Hemmed 14 ft Long ***No Longer Available

Reinforcement bar 2-1/4"
20G

LB1012-18

Laminated Bumper Standard Black 12" x 18" 10" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LB1010-24

Laminated Bumper Standard Black 10" x 24" 10" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

TVB436-11SF

Steel-Faced Laminated Bumper Black 5 1/4" Projection Vertical Installation 36" x 11" Sold Individually

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required.
5/8" anchor bolts mounted through pre-drilled holes into dock or can be welded to curb angle.
Steel face is 3/8" thick heavy duty high carbon steel that is mounted over a laminated dock bumper.
Plate to be welded to 2 or 3 steel support brackets which are to extend back to the 3/4" supporting rods.
Brackets to be punched with elongated holes to allow steel face to "float" upon impact.

.......more details

LB610-12

Laminated Bumper Standard Black 10" x 12" 6" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LB410-14

Laminated Bumper Standard Black 10" x 14" 4" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 1” diameter.

.......more details

LB406-36

Laminated Bumper Standard Black 6" x 36" 4" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 1” diameter.

.......more details

34115

Doorlec Awning Pulley 194 x 1"

Used on model LDJ & LDJ-3

T010

Manaras Trolley Track 10ft for 1/2HP models *Actual length 150"*

For models MLT/OTH/OTBH 1/2hp only used with Chain #48 (#410)

R4

Erone Radium 4-Channel Key Chain Transmitter 433MHz

Designed for the control of automatic closing systems and anti-burglar systems thanks to its very high security coding system (KeeLoq® Hopping code).
The code sent by the transmitter changes at each activation avoiding any scanning and copying risk.
A special algorithm allows to keep synchronized transmitter and receiver.
Range up to 250 m (820 ft)
Ergonomic rugged & durable
Battery: Two 3V lithium battery (CR2016)

.......more details

Wireless System Chart

MD-00005

Sprocket 410B12 3/8" NO KW 2 SS 1/4"

276554

Overhead Door Ribbed Air Tubing 1" Sold by the Foot

Rubber tubing

K20-1050C-2TLP

LiftMaster Electric Motor 1/2 HP 115/230V 1Ph TEFC Logic

E/BLOP/246

Automatic Systems Option DBK Fan Heater 120V-400W for BL229

MX00037-120V

Micanan Brake Assembly for PRO-J/H 120V Solenoid included

IRB-325

EMX Industries Door and Gate Infrared Thru-Beam Photocells w/ Grey Hoods UL325-2016 EMX-1112-K

Type B1 non-contact sensor for use with automatic gates and doors
Power: 12V to 24V AC/DC
Relay Contacts: 30V 1A
Dimensions: 5.03" High x 3.06" Wide x 3.02" Deep
Housing: UL and CSA Type 4 4X 3 3R 12 13 Rating
Operating Temperature: -40 degrees to 170 degrees

.......more details

Installation manual Sell sheet

DM120-T/FORCE

Cable Drum High Lift 120" D575-120-1 Pair Torque Force

120" High Lift aluminum die cast alloy cable drums.
3/8"-16 x 2" hardened cup point set screws installed with red heads.
Pair includes: (1) LH and (1) RH. Color coded: Red=LH and Black=RH.
Maximum high lift: 120".
Maximum door height: 144" + High Lift.
Rated lift per drum: 500 lbs.

.......more details

DM18VL-T/FORCE

Cable Drum Vertical Lift 18' D1100-216-1 Pair Torque Force

18' Vertical Lift aluminum die cast alloy cable drums.
3/8"-16 x2" hardened cup point set screws installed with red heads.
Color coded: Red=LH and Black=RH. Pair includes (1) LH and (1) RH.
Max. Door Height: 18'-1".
Rated Lift per Drum: 660 lbs.
Max. Cable Diameter: 3/16".

.......more details

E/BLOP/122

Automatic Systems Red Arm Light - 2 Sets

Increases visibility of the arm on BL229 gate operator

BL229-EX1929/G45

Automatic Systems Rising Barrier Gate with 14'9" Round Arm Left Hand

LIMIT-SHFT-ASY-XP

Lynx Complete Limit Shaft Assembly for Explosion Proof Op.

Special order
Includes bearings cams and sprocket

DB13

Molded Rubber Bumper Black 13" L x 10" W 4" Projection 2-Hole Sold Individually

Manufactured from reinforced prime rubber
Rectangular horizontal mount
Ideal for light traffic loading docks.
Perfect protection for in-plant wall protection from forklifts and other material handling vehicles molded bumpers will not warp rust rot or harden.
Bumper comes with 2 pre-drilled countersunk mounting holes drilled to accept 3/4" anchor bolts

1104-8FT-GREEN

Residential Side & Top PVC Weather-Strip with cap 8' Long - Green (R)

Green rigid vinyl retainer with green flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

26CW94525-CUT

Truck Door Intermediate Panel (15" x Cut-to-Size) Painted White for Whiting Dryfreight

These panels are cut to an extra wide width to fit wider vehicle applications.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
3/4" thick 7 ply exterior grade medium density plywood.
Painted white

MB-15202

Micanan Electric Baldor Motor Only 2 HP 575V 3PH C-Flange TEFC 145TC (Severe Duty)

HTLS

Stainless Steel Garage Door Low Headroom Top Bracket 12-Gauge Sold per Piece

Manufactured with Heavy Duty 12ga. Rust-Resistant 304 Stainless Steel
Universal Design.
Fits Most Overhead Sectional Doors
Use for Low-Headroom Doors Only
5-3/4” tall x 2-1/2” wide
Priced Per Each

.......more details

41B0873

LiftMaster Safety Sensor Sunblocker Kit Works With 41A5034 and 041-0136

This complete kit is used to shield sunlight and prevent accidental reversal of garage door from sunlight shinning directly into the safety sensors
Works with 41A5034
Same as: 041B0873 41B873

41A5658-1

LiftMaster Dual Gear & Sprocket Assembly

This complete kit is compatible with 3/4HP LiftMaster® Models 8587/8587W; and various dual AC chain drive garage door openers.
Kit includes: helical gear and top hat assembly worm gear wear bushings grease and hardware needed to replace the chain drive gears.

MT21-YELLOW-RH

Miller Edge 2-Wire Pressure Sensitive Edge Yellow Right Hand Outlet Sold per Foot

��Electromechanical medium profile edge for rolling fire door applications. •Touch sensitive signaling allows for immediate reversing or stopping of motion. •The MT21 is completely felixible and will contour to curved surfaces. The MT21 will also act as weatherstrip. •Temperature range: -30F to 155F •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •2 wire NO configuration •Horizontal mount •ANSI/UL325 recognized component •One year warranty

Worksheet Installation manual

91-00700

Truck Door Elevator Bolt 1/4"- 20 x 1-3/4" 1" head

Zinc plated finish

Q230

LiftMaster Mounting Bracket (2 pcs) MIR-1 (K77-50240)

Steel Bracket Mounting Plates (2) For Elite Miracle and LA500 Operators
Dimensions: 9" x 2-1/4" (1/2" holes) and 6" x 2-1/4" (5/8" hole)

ALUM-538

Aluminum 24" x 100' Spool Wicker / Cafe # 538

20% thicker than the aluminum sold in retail stores (0.022" )
Gentek # 538
Reverse side is #431 Bright White

Colour chart

TL-5000

Trailer Lock Lever 32-1/4" long Stainless Steel

Provides leverage to easily open shipping container doors
18-8 Stainless steel construction
Polyurethane coated handle
5.5 lbs.
32-1/4" long
Fits most modern container door handles

.......more details

IRB-BX

EMX Industries Plastic Enclosure Only for IRB-4X Nema 4 Sold Individually

Includes housing and clear plastic front

RS3346

Roller 3" Steel 3/4" Shaft 5.8" stem Heavy-Duty 6203 Bearing

Steel Roller Wheel diameter: 3" 5.8" Stem Overall length: 7"
Heavy-duty 3/4" shaft supporting higher weight load applications

PRO-HB-5053U-LH

Micanan 1/2HP 575V 3P Hoist Op. with Brake N1 Eyes Monitored ECB Left Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake included

PRO-HB-5053U-RH

Micanan 1/2HP 575V 3P Hoist Op. with Brake N1 Eyes Monitored ECB Right Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake included

MOD012

Manaras Non-Resettable Counter Modification Inside Control Box

An electromechanical counter is activated to count each complete door cycle.

10-1036-4

Whiting 2" Nylon Roller 5" Stainless Steel Shaft for Truck Doors

A Whiting original part
Stainless steel bearings stainless steel shaft

RW-DOOR

Richards Wilcox Door Special Order

Special order as per customer's requirements

89463

Marantec Deluxe Wall Control Panel w/ Light & Vacation Lock

This unit will work on any model Marantec garage door opener
Replaces part # 47307 65456 M3-543
Made in Germany

38C

Skylink 1-Button Universal Remote ***NLA

Easy to carry or clip on sun visor.
Operating range of 100 feet and more.
12V alkaline battery included.

MA003

LiftMaster Electric Motor Only 1/2 Hp 24VDC BM

Same as: MA003M MA-003 MS003 20-60000-1
Used on Liftmaster Mega Arm gate operators

TRACK-3"-RAW-24

Raw Vertical Track 3" 24'-0" Sold per Piece

SD755L5-RH

LiftMaster Heavy-Duty Slide Door Operator 3/4HP 575V 3PH Right Hand (Must include hardware box)

Perfect for split and sliding doors involved with industrial applications.
It is installed above the door and corresponds with the direction the door will be traveling.
Comes equipped with an emergency disconnect and for manual lifting in an emergency and automatic reconnect.
The new logic 5 commercial operators come with MyQ Technology built in. * 828LM required
Built In Security+ 2.0 radio receiver
Solenoid brake included

.......more details

Installation manual Manuel d'installation Sell sheet Brochure

MK00707

Micanan Varistor Harness 110V with Black Wires

37408-PREWIRED

Doorlec Reversing Contactor BF9 120VAC Prewired for Single Phase

CPS-UN4G

LiftMaster Commercial Protector System Thru-Beam Eyes NEMA4 Black

Waterproof photoeyes.
Monitored Thru Beam Photocell
For direct connect on HCT

IR55

Industrial Thru-Beam Infrared Sensor Nema4 ** Discontinued

Infrared Sensor
NEMA 4 Hooded Metal Enclosures
Distance: 165 Feet
12 - 24 VAC/DC
Internal Heater Standard
UL 325 Compliant

.......more details

Instructions manual

MOD003

Manaras Time Delay Mod. 1.5 Sec 24V for Contactor Models

To be ordered in conjunction with a commercial operator
Order MODKIT003 for field upgrades

DM413-COATED

Cable Drum Standard Lift 12' Specialty Coated 400-12 Pair

Use for Commercial Standard Lift Doors
Maximum Door Height 12'1"
Lifting Weight Per Drum 375 lbs.
Resists Chemical/Moisture Corrosion
Abrasion Resistant
Thermally Stable Coating

.......more details

PRO-GH-10083U-R

Micanan 1 HP 208V 3P Gearhead Op. N1 Eyes Monitored ECB Right Hand

Designed for use on all rolling doors and grilles and for large sectional doors with high or vertical lift.
Full function smart 10.0 logic board featuring on-board receiver with antenna and enhanced program selections.
External radio control terminal strip
Three button O/C/S control station Nema-1
Supplied with Nema-1 photocells
Emergency chain hoist with electrical cut-out switch for manual operation

.......more details

Installation manual Specification sheet

PRO-H-5011R-LH

Micanan 1/2HP 115V 1P Hoist Operator Contactor Model Left Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Solenoid brake OPTIONAL

Installation manual Specification sheet

SL14COP

Copper Sleeve 1/4" 100 Sleeves per Pkg *price on request

Oval sleeves ONLY
Stops sold separately part # ST14COP

PRO-TB-5011-E

Micanan 1/2HP 115V 1P Trolley Operator with Brake NM ECB No Eyes

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#410 roller chain on 1/2 HP models
Non-Monitored board NO photocells
On-Board receiver holds up to 20 transmitters

838

Skylink Transmitter / Receiver Set Rolling Code ***NLA

Generates new code each time you push the button these codes never to be repeated.
99.99% works with most brands of garage door openers.
Ideal replacement for older or obsolete models.
Electronic scanners "code grabber" cannot duplicate the operating code.
Easy to install & program.
Works as a secondary receiver (both original existing receiver and 838 receiver will work simultaneously).

.......more details

P220-2K

Heddolf 2-btn Transmitter 8-Dip Switch 318 MHz

Allstar compatible remote

P220-3K

Heddolf 3-btn Transmitter 8-Dip Switch 318 MHz

Allstar compatible remote

K32-10540

LiftMaster Gear Reducer 20:1 SL595

Same as 32-10540 32-55011 32-5501-1 G3255011

Q089

LiftMaster Trolley Body Assembly Kit K75-50147

For Liftmaster trolley operator HCT
Kit includes: trolley body cover trolley wheel shaft installation screws ring clip plastic plugs and lock with keys set

GT751L5

LiftMaster Heavy Industrial-Duty Trolley Op. 3/4 HP 115V

Suspended from the ceiling the operators are used on sectional overhead doors with a standard lift.
GT operators are directly attached to drive and control the door
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Requires 828LM MyQ Internet Gateway to connect to MyQ Smartphone App.
High-starting torque continuous duty motor with overload protection
Door speed approx. 11-12 inches per second

.......more details

Installation manual Manuel d'installation Sell sheet Brochure

9723-48

Whiting Pull Strap 48" with Steel Retainer

48" long

333857

Wayne Dalton T-Style Weather Seal Sold per Foot

Used on garage doors and mini storage doors
T = 7/16" wide – .438 Bulb is 7/8" x 7/8"

MWC-32

Wheel Chock MWC-32 Rubber with Eye Hook

Good stability over others in this class
Long Lasting 80 Durometer rubber
Size: 6-1/2" wide x 9-1/2" long x 8-1/2" high

HAE00061

Linear LDCO Control Board BBU Compatible *** USE HAE00077 instead

DC motors

38079001

Agri Safety Chain GR 70 3/8" x 69"

Min. strength: 20200 lbs
Includes hook joiner link & tag

PPLV1-100

LiftMaster Passport Lite 1-Button Visor Remote with Sec+ 2.0 Technology 100/PKG

Passport Lite Remote Controls provide cost-effective single button access solutions for gate access only or high-capacity commercial properties applications such as employee parking lots and tenant garages.
These remote controls are specifically designed for gate access control and are not compatible with LiftMaster Garage Door Openers.
2x the range of standard remote controls
Narrow-band transmission on 3 simultaneous frequencies (310 MHz 315 MHz 390 MHz)
Compatible with LiftMaster® commercial receivers (850LM 860LM PPWR STAR1000) and Security+ 2.0™ Gate Operators
Sold in a 100 pack

.......more details

Programming Instructions Instructions de programmation Sell sheet Brochure

PBT-3

Exterior 3-Btn O/C/S Control Station Nema 4 Metal Enclosure

Surface mount
Metal enclosure
Not CSA approved
Dimensions: 6" H x 2-3/4" W x 3-1/2" D

SPRING026

Manaras Trolley Arm Disconnect Spring MGH

344

Cable Clamps Galvanized 5/16" Sold per piece

Galvanized malleable cable clip

JY-10

Devanco Solvent & Degreaser 400g

General purpose solvent and degreaser
Contains natural citrus oils. Cleans oily greasy and dirty surfaces.
Dries quickly and leaves no residue.
Approved by CFIA.

Safety data sheet Fiche de données de sécurité

21702

Doorlec Close Auxiliary Switch Double Limit DAT

BCH751L5-LH

LiftMaster Hoist Op. with Carwash Mod. and Brake 3/4 HP 115/230 VAC Logic 5 Left Hand ***Replaced by CRBH751-LH

Industrial Duty Hoist Operator with Damp Environment modification.
Comes with either CPS-UN4
Brake installed on operator

Installation manual Manuel d'installation Sell sheet Brochure

PROROLL4

Cantilever Roller 4" Round Post with Covers Sold as a Pair *** Discontinued

3100 pound rating
Integrated polyurethane cover for safety ensuring UL325 compliance
Sealed bearings for maintenance-free operations
DuPont™ Delrin® injection molded for smooth quiet movement
High-precision roller for water resistance and industry's best overall temperature rating

GD-STEND-21D

End Cap Steel 18G 21" Double 1-3/4"

WB-300

Skylink Multi-Function Wall Console ***For Old EQ Models

For use with the Skylink garage door openers.
Oversized Push Button for activating the garage door opener.
Activate opener light on/off and the light will remain on until the button is pressed again.
Feature with Lock function to ignore all radio signals for added security.
Illuminated LED indication.
Easy to Install.

.......more details

GD-STEND-18D

End Cap Steel 18G 18" Double 1-3/4"

MK008050

Push Button Standard Residential Non-Illuminated 2 Wire Bell Button

SPST
2 mounting holes
Dimensions: 2.375 x 0.875 x 0.75 inches
Color: Light Gray
Intended for indoor use

19-50106M

Chain # 50x106 (5-1/2') with Master Link

Also known as: 350120 199023
106 links

PULL-CHAIN-ASSY

Pull Chain Spring and Chain Assembly 13' & 14' Doors

Used with a hand chain for full vertical doors.
Eliminates the need for leaf bumpers
Chain can be adjusted for smaller doors

WOR

Linear Wiegand Output Receiver 318 MHz

Designed for use as an access control interface for Linear’s block coded digital transmitters.
The unit receives signals from transmitters adds a facility code to the data and sends the information to the Wiegand input of the access control panel via a 5-wire connection
Ideal way to facilitate handicapped access
Multi-button transmitters can double as personal emergency devices for triggering security alarms
RF input/Wiegand output receiver supports 26 30 and 31-bit data formats
Wide selection of MegaCode (over 1 million codes) format transmitters with available block coding

.......more details