Devanco Canada - Get The Right Garage Door Opener‎ and Parts

PRO-H-7553U-RH

Micanan 3/4HP 575V 3P Hoist Operator N1 Eyes Monitored ECB Right Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake OPTIONAL

MP-00040

Micanan High Cycle Modification Jackshaft Models PRO-J / H only

For installations with high frequency usage
Double V-belt cast iron flanged precision bearings on all shafts and delay on reverse circuit
Supplied with #50 chain

BD3240

Piezo Warning Buzzer Alarm with Volume Control 24VAC/DC

2-1/2" long 90 DBA

26CW94222-CUT

Truck Door Bottom Panel with Hardware (12" x Cut-To-Size Painted White for Whiting Dryfreight

These panels are cut to customer's specifications
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
These panels have no routs and shipped without holes.
3/4" thick 7 ply exterior grade medium density plywood.
Painted white
Comes with pull strap two bottom roller shaft covers stud plates standard lift handle seal & retainer

.......more details

CAP-450-540-110V

Capacitor 450-540 MFD 110/125V with Resistor *** To Extent of Inventory

Same as CP-CAP-COM-450-540
Motor start capacitor

CF-101-10

Commercial Side & Top Weather-Strip 10' Long Aluminum / Vinyl

Same as Garaga CF101

785149

FAAC XP15B Photocells 15m Range 785103

Surface mounted security devices with 15 m range.
The kit contains: 1 transmitter and 1 receiver.
The photocell has a BUS system technology "2easy" for easy installation.

PRO-GH-10053U-R

Micanan 1 HP 575V 3P Gearhead Op. N1 Eyes Monitored ECB Right Hand

Designed for use on all rolling doors and grilles and for large sectional doors with high or vertical lift.
Full function smart 10.0 logic board featuring on-board receiver with antenna and enhanced program selections.
External radio control terminal strip
Three button O/C/S control station Nema-1
Supplied with Nema-1 photocells
Emergency chain hoist with electrical cut-out switch for manual operation

.......more details

Installation manual Specification sheet

SPR50B12X1

Sprocket 50B12 for a 1" Shaft 1/4" keyway

ame as MD-00012

VBELT_5L370

Manaras VBelt 5L 37" - repl. by B34

5L370

CLUTCHPLATE006

Manaras Torque Limiter Plate

K75-19977

LiftMaster Disconnect Kit Model J SL575

30257T

Genie Coupler Screw Drive Units

Used for attaching the screw of Genie screw drive rail to the motor head.
This coupler is made to break away if the door hits a hard obstruction thereby protecting the motor.
If the motor of the screw drive Genie runs but the screw is not turning this coupler needs replaced.
To check and replace that part remove the two screws holding the rail to the main power head
Mounts on rear of opener rail and fits in motor head.

TRACK-GUARD-24

Track Guard 24" Tall Safety Yellow With Base Sold as a Pair *** No Longer Available

Provides impact protection to vertical track
45° angle flange adds strength protects from side impact.
7-gauge steel construction powder coated safety yellow for high visibility.
1/4” foot plate drilled with slotted holes for three 1/2” anchors.
Wall flange drilled with slotted holes for four 3/8” anchors
Includes: 60-5090 (right) and 60-5091 (left) sides

.......more details

PRO-GH-5011U-R

Micanan 1/2HP 115V 1P Gearhead Operator N1 Eyes Monitored ECB Right Hand

Includes 3-btn O/C/S control station Nema 1
External radio control terminal strip
Heavy duty worm gear reduction in oil bath gearbox
Solenoid brake standard
#50 roller chain and sprockets on final drive
Emergency chain hoist with electrical cut-out switch for manual operation

.......more details

Installation manual Specification sheet

1-4-3

Spring Extension Clip Medium-Heavy

27028

Doorlec Electric Motor 3/4HP 115/230V DC403C

Bolts to gearhead (c-flange) openers

Wiring diagram for 120V Wiring diagram for 230V

STRUT-3-18'

Door Strut 3" Hemmed 18ft Long

Reinforcement bar 3"

12577

Doorlec Clutch Disc Fiber 1 1/2" (3.75 cm)

Fits model SGP

25-10105

Truck Door 1" Steel Roller 3.25" Shaft Length for Todco Roll-Up Doors

Zinc plated Hardened shaft and raceways
Seven roller ball design

50-HERK-RC2

Hercules Infrared Programming Remote Red (50-HERK-RC2)

Conveniently choose from 8 different preset comfort functions to adjust detection fields mounting heights relay hold interval cross traffic optimization direction recognition people/vehicle separation slow motion detection turn on/off filter functions open the door manually and much more
Bidirectional
Fine-tune the motion detector from the ground without guessing if all the settings have been received by the sensor

TRACK-2"-RAW-9

Raw Vertical Track 2" 9'-0" Sold per Piece

MX00137

Micanan PRO-APT Trolley Carriage with Auto Re-Engage Feature (MX00171) *** No Longer Available

New part number is MX00171

02-103-FR

Push Button Station 3-btn Surface Mount French Nema 1 Metal Housing

PBS-3S
Ouvre-Ferme-Arret
Momentary contact
Metal enclosure
Nema 1
Dimensions: 5-5/16" H x 2-3/8" W x 1-13/16" D

.......more details

MD00020

Micanan Sprocket 50B40 x 1-1/4" bore has 1/4" and 3/8" keyway with set screw

41D7742-5

LiftMaster Travel Module Kit 3/4 Hp

A one piece travel module replacement kit.
Compatible with 3/4HP LiftMaster® Models 8557 & 8587 and various AC chain and belt drive garage door openers
Same as 041D7742-5

2376.200.30.890

Whiting Torsion assembly .200 wire size 30" spring length 89" shaft

41A2780

LiftMaster Chain Pulley Bracket Kit

Also known as: 1B3214 1A2780 1C2762 41A2780 41B3214
Compatible with ATS 2595 3595 models

Q089

LiftMaster Trolley Body Assembly Kit K75-50147

For Liftmaster trolley operator HCT
Kit includes: trolley body cover trolley wheel shaft installation screws ring clip plastic plugs and lock with keys set

41A3589-1

LiftMaster 8ft Belt Assembly for Models '93-2000

For use with LiftMaster belt drive models 1270 1280 1280R.
Full belt assembly
For use with Chamberlain belt drive models 8100 8200 and 9200.
For standard 8 foot high garage doors
T rail assemblies ONLY.

FRONTIDLER007

Manaras Front Idler Assembly #48 (#410)

4007-14FT

Aluminum Retainer only for Light Brush 90 degree

For angle application
For use with Light Brush or Vinyl Insert.
die # A-25060

ULT-MVP-2-D-TEK

EMX Industries Multi-Voltage Loop Detector 2-Channel (ULT-MVP-2U)

Combines small size with 9VDC to 240VAC input range.
Size: 73 x 38 x 78mm
ULTRAMETER™ display indicates the appropriate sensitivity setting the vehicle positioned on the loop
Ten (10) sensitivity adjustments
Four (4) frequency settings
Automatic sensitivity boost (ASB) delay fail-safe/fail-secure and infinite or normal (5 min.) presence

.......more details

JDMG-LG-BBU

GDI Battery Backup Option G3243

Battery Backup option for JDMG-LG operator

1A4324

LiftMaster Steel Angle Hood Mount Bracket

Heavy-gauge steel bracket used for vertical or horizontal mount for either front or top of coil mount.
May be welded.
For use with LiftMaster Model DJ DH MGJ GH J and H.
Cannot be used with Model GH 3HP.

757-325

Fasteners Lag Screw Hex Washer Regular Profile 5/16" x 1-5/8" 325/Bag KH

7/16" head
Ideal for fastening tracks to the wall

BCH753L5-RH

LiftMaster Hoist Op. with Carwash Mod. 3/4 HP 208/230/460 VAC 3 Ph L5 Right Hand ***Replaced by CRBH753L5-RH

Industrial Duty Hoist Operator with Damp Environment modification
External brake included
Comes with CPS-UN4 photoeyes

Installation manual Manuel d'installation Sell sheet Brochure

ALUM-547

Aluminum 24" x 100' Spool Sable / Sablon # 547

20% thicker than the aluminum sold in retail stores (0.022" )
Gentek # 547
Reverse side is #431 Bright White

Colour chart

IRB-MON-RX

EMX Monitored Receiver Board Only

Receiver board only for IRB-MON

.343-514-R

Cut-to-Length Torsion Spring .343 x 5-1/4" Right Hand Wound Blue/Red

Priced per inch - cones sold seperately
For factory installed cones use part no. C-525-INSTALLED
If cones are required a filler must be added use part # FILLER

CP-ARM-NEW

Lynx Auto Re-Connect Carriage Arms Only New Style 14-1/2"

Arms only for CP-CRG-NEW

WOR

Linear Wiegand Output Receiver 318 MHz

Designed for use as an access control interface for Linear’s block coded digital transmitters.
The unit receives signals from transmitters adds a facility code to the data and sends the information to the Wiegand input of the access control panel via a 5-wire connection
Ideal way to facilitate handicapped access
Multi-button transmitters can double as personal emergency devices for triggering security alarms
RF input/Wiegand output receiver supports 26 30 and 31-bit data formats
Wide selection of MegaCode (over 1 million codes) format transmitters with available block coding

.......more details

60-2439

Allen Bradley Swivel / Tilt Mounting Bracket ***To Extent of Inventory

For 9000 series photo switches

5001-WG-12-MOAK

Residential Side & Top Weather-Strip 12' Long Wood Grain Medium Oak with Screws

PVC wrapped
Painted aluminum retainer
Dual fin vinyl
Painted screws to match. 1 screw per foot
Sold by full case quantity (20)

BK200

Flat End Plate with Bearing 5-5/8" 4-Hole Sold per Piece

8-gauge
Includes commercial-grade semi-precision ball bearing bearing
3" wide

XT2564-CUT

Xcluder Rodent Block 4" Black Sold per Foot

For commercial and residential applications
Creates a tough barrier that is virtually impenetrable to rodents

Sell Sheet

C20-SR

Bearing Retainer football sytle (one piece) for 1-1/4" and 1" press fit bearings

Bearing flangette only.
Works with R5110 (1" bore) and R5114 (1.25" bore) press Fit bearings

DL-4000-6

Dock Leveler Retainer Galv. Steel Weldable 6' Long *** To Extent of Inventory

Weldable to sides of dock leveler
Use with 4007 aluminum retainer & light brush (not included).
Vinyl insert slides into this outer retainer.

MHS5011U-RH

LiftMaster 1/2 HP 120 Volt Medium Duty Slow-Speed Jackshaft Operator

Designed for use on rolling sheet doors.
It features an adjustable friction clutch high-starting torque motor with overload protection emergency chain hoist with electric interlock and emergency disconnect chain.
Easy emergency manual operation using a floor level disconnect and an electrically interlocked chain hoist mechanism
Floor level disconnect
24V NEC Class 2
Wiring is factory present to C2 mode

.......more details

Installation manual Sell sheet

19-48047MN

LiftMaster Roller Chain #48 x 47 Nickel Plated

#48 x 47 pitch with master link

T-833-H

FL-Heddolf 3-btn Transmitter 311 MHz ** this model is discontinued

Open/Close up to 3 doors or Open/Close/Stop one door
Heddolf-Keystone 3 button transmitter 311mhz
8 3-Position dip switch format
9V battery and metal clip included
Compatible with Allstar 3 button T-833
Same as P220-3K

.......more details

101475

Insert Bearing 1-1/4" Bore SB206-20

Works with Flangette Retainer 102079

MUSHROOM-PB

Lockable Mushroom Push Button with 1 NC Contact

N/C Contact "Stop"
Push to Stop Turn to Unlock
NEMA 4 Enclosure

TC3-411

Lynx Commercial Trolley Op. 3/4HP 120V for 14' High Door with Brake Contactor

Sell Sheet

50DCTWF

LiftMaster Receiver Logic Board DC. WiFi *** replaced by 050DCTBF

Board: Tri-band Security+ 2.0l
Fits: 8550W
001D8363
Same as 50DCBL5 001D8363 041D8169 1D8169‑2 001D8214 1D8169‑1 1D8169 1D8363

ST-PROFILE

Soft Touch Profile Sold per Foot

Yellow air-wave edge
Fits most standard 1-5/8" retainers
300 feet in a roll

VBELT_5L340

VBelt 5L 34" B31

Fits Lynx HDC operator
5/8" x 34"

MK-00511

Micanan Resistor 330 OHM 5Wc/w Leads (For Motor)

CP-LX740

Lynx 3-btn Transmitter 372 MHz for Commercial Op. with UL325 Board

UL325
Works on the new Lynx commercial operators
For 3 doors
Not compatible with the new 372HMz residential operators

Programming instructions Compatibility chart

25-60503

Truck Door T-Style Ramp Handles Curbside (Right)

Black plastic construction
Cross ref.: 39504-2

25-01434

Truck Door Stainless Cables 110" 1/4 nylon eye 7x19 Pair for Roll-Up Doors

Works with both Whiting and Todco doors
Nylon eye ends are used 1/4" and 7/16" eye cables
Cross Ref: W4020-1

K-MALED-HDWCB

LiftMaster LED Barrier Arm Hardware Kit

Service kit to connect new LED arm to existing barrier gate
Includes bolts 3" (2) nylon nuts (2) washers (2) 1/2" watertight connector 48" extension cable for breakaway connector "Y" cable and 12 Vdc power supply

1104-7'-DK-SAND

Residential Side & Top PVC Weather-Strip with cap 7' Long - Dark Sandstone (DDG)

Garaga dark sandstone rigid vinyl retainer with Garaga dark sandstone flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

22306

Programmable 7-Day / 24 Hr Timer

MHN-SET-100

Magnetic House Number Set 5" Black Embossed 100 pcs

Flexible magnetic material with an embossed finish
100 piece contains ten each of numbers 0-9
Priced per box

R5202

Pulley 3" Zinc Plated Steel with Sheave Strap

Bored for 3/8" diameter bolt
Maximum cable diameter: 3/16"
Hardened inner race.

MV00021

Swivel Type Pull Cord - SPST Nema 4

Data sheet

MO00003

Micanan Compression Spring for PRO-H/HB

0.80 ID x 0.092G x 1.80 Long

11-10705

LiftMaster Output Shaft MH

T116

Manaras Trolley Track 16ft for 3/4HP & All APT models up-charge *Actual length 222"*

For models MGT/OTH/OTBH 3/4 hp only with Chain #41

CONTACTOR008

Reversing Contactor Struthers Dunn 115VAC

K20-1050B-2P

LiftMaster Electric Motor 1/2 HP 115/230V 1P Base Mount

Replacement motor for BG770 BG790
Same as 20-1050B-2

MK-00157

Micanan Intrinsically Safe Modification (Safepack)

Modification available for add-on to certain models only

D6375-164

Cable Drum High Lift 164" 1" Bore Torque Force Pair

Maximum hi-lift: 164"
Capacity: 800 lbs per drum
Cable length: Floor to shaft center 181" minus amount of Hi-Lift
Cross reference: DNS 410-164 OMI 164HL M162-4165

RESET007

Manaras Resettable Overload Fuse 10A 1 Phase

7001-WG-9-MO

Residential Wood Grain Side & Top W/S Medium Oak 9' Long - Painted Screws to Match

Medium Oak retainer with Medium Oak vinyl
PVC Wrapped
Steel is Notched on Both Ends for Easier Installation
Economical
Dual Fin Vinyl
Painted Screws to Match

.......more details

97799

Marantec Shark Tooth Position Reference Tab Belt Rail (96834)

Same as part number 96834
For belt rail

Replacement Instructions

K79-13493-2

LiftMaster Logic Board Replacement Kit FDCL

Replacement board for fire door model FDCL

UCP207-20

Precision Pillow Block Bearing 1-1/4" Bore

6-9/16" overall length
5" hole center to center distance

14-1004

PVC Roll 8" x .080 Standard Clear Smooth 300' for Replacement Strip Curtain

Suitable for most average applications.
Temperature Range: -20°F to 150°F (-28° C to 66° C).
Formulated with ingredients that meet USDA requirements for incidental food contact.

.295-334-R

Cut-to-Length Torsion Spring .295 x 3-3/4" Right Hand Wound Blue

Priced per inch
For factory installed cones priced seperately - use part no. C-375-INSTALLED

DXR-701

Linear 1-Channel Digital Receiver 315 MHz

A digital receiver with an isolated relay output designed for use with Linear's DX Format transmitters.
When the receiver detects a signal from a transmitter programmed into its memory the relay output activates.
The relay has four optional output configurations.
32 transmitter capacity
RF activity indicator
Quick-learn programming

.......more details

Installation Manual

SNRRLIGHTJHL

LiftMaster Light Bulbs for MiniKey 10/pkg

Light bulbs for recessed keypad
Same as SN1650029

HSC-1000

Hand Swager 1/4" & 5/16"

Swages 1/4" and 5/16"
Made in Japan

HSCC112

Hinge Combination Hinge Clopay Style 12-ga Stainless Steel

Manufactured with Heavy Duty 12ga. Rust-Resistant 304 Stainless Steel
Laser Cut for a Clean Finish

41D605-1

LiftMaster Electric Motor 80kg/100kg

For retail models: WD952KD HD800D and WD952LD

Replacement Instructions Instructions de remplacement

37028G.S

Genie Circuit Board for Retail Model 1022 ** Repl. by 39537R.S (no cover)

Compatible with Genie 1022 1042 ChainLift 600 and QuietLift 600 models.
Purple

PEDALU42-HOOD

Aluminum Hood Only No Post for PEDALU42

Hood only No post
High quality aluminum
Boitier pied estau seulement en aluminum

Shop drawing

GH4416-09-R

Green Hinge #9 12-ga Right Hand *** No longer available

A unique spring-loaded hinge that allows automatic adjustment of the door.
Provides a close tight seal of the door to the building
Green powder coat finish
For doors up to 20ft

GH4416-07-L

Green Hinge #7 12-ga Left Hand *** to extent of inventory

A unique spring-loaded hinge that allows automatic adjustment of the door.
Provides a close tight seal of the door to the building
Green powder coat finish
For doors up to 20ft

GH4416-02-L

Green Hinge #2 12-ga Left Hand *** No longer available

A unique spring-loaded hinge that allows automatic adjustment of the door.
Provides a close tight seal of the door to the building
Green powder coat finish
For doors up to 20ft

DGPROX

Erone 1-Door Stand Alone Card Reader / Keypad

500 users (proximity badges and/or codes)
3 operating modes: - Mode 0: badge and code - Mode 1: badge only - Mode 2: badge or code
Audible & Visual feedback
1 request-to-exit input
Tamper switch
1 form C door relay output (3A/125V)

.......more details