Devanco Canada - Get The Right Garage Door Opener‎ and Parts

25-42-60

Extension Spring 7' Door - 60 lbs Brown

Double - Loop
25" long 42" stretch 60 lb load
Sold individually
Rated for 10000 cycles

Spec Sheet

EP2984

Exhaust Port 4" with latch long barrel ** Discontinued**

4" inside diameter 2" sleeve with latch.
Includes fasteners & gaskets.
Polished aluminum finish.

SLT4-18

Rolling Steel 3" Crowned Slat 18-ga Galvanized

DL-4000-8

Dock Leveler Retainer Galv. Steel Weldable 8' Long

Weldable to sides of dock leveler
Use with 4007 aluminum retainer & light brush (not included).
Vinyl insert slides into this outer retainer.

CONSD24V

Reversing Contactor Struthers Dunn 24V

Struthers-Dunn # A275KXX90

50195

Doorlec Front Idler Assembly with Shaft 41B9 Oilite Trolley Models

Fits all Doorlec commercial trolley operators
Same as # 50190

60-6560-A-YELLOW

Speed Bump Yellow 36" Econo Light Weight for Asphalt **** NLA

A standard speed bump system section includes (2) main pieces (2) endcaps x 5” long and (1) connector clip.
Main pieces may be added and connected to form larger units.
36” long x 10.5” wide x 2” high (main piece)
EndCap: 5” Safety Snap On End Cap - sloped modular profile prevents tripping by pedestrians.
Yellow Plates: Each speed bump section is embedded with (6) yellow safety plates of weather resistant composite material for protection from salt freeze and thaw.
Can be used as a cable cover - bottom sides include 1” x 1½” channels for protecting temporary or permanent cables or hoses.

.......more details

ME00007

Micanan Jackshaft Drive Shaft 1" x 15" L c/w KW

2 required per machine
Sold individually
1" x 15" long

CS303-C-1

EMX Car Sense Vehicle Detector Control Unit *** Replaced by LRS-C1

The CarSense™ 303 features advanced 3-axis magnetoresistive sensing technology.
The sensor measures Earth’s magnetic field and responds to disturbances caused by ferrous objects.
The CS303 combines this exciting new technology with a fieldproven hardware platform to produce a high-sensitivity compact and cost-effective solution for reliable vehicle detection.
Three sensing elements provide magnetic field measurement in the X Y and Z axes improving detection sensitivity.

1-0199

RW Hinge 700 03 x 7 18" (36" Open) Black

Straps: Formed steel 3/8" thick x 2-1/2" wide (basic width)
Pin: 3/4" dia steel Zinc plated. Pin loose with cotter pin
Bearings: 2 hardened steel disc bearings
Finish: Complete hinge black enamel
Fasteners are not included

2241GRB

LiftMaster Adjustable Guide Roller Bracket Sold Each

LiftMaster Guide Roller Adjustable Guide Roll Bracket (req. for dual system) (Corrosion Protected-Zinc)
Adjustable bracket provides ability to mount 2 Guide Rollers

RCB-DCB3-PRO

Pro Cut Handheld Chain Break #50 Chain Max Version 3

Adjustable chain holder accommodates #65 chain up to #50 chain
Quickly and easily handle chain rivet removal saving you time and effort
Includes two replacement pins inside the handle chamber

CRBH505L5R

LiftMaster 1/2 HP 575 VAC 3 PH Commercial Hoist Operator Logic 5 with Carwash Modification****NLA

H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door.
With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.

.......more details

IP-SDS

CDVI Point of Entry Exterior Single Door Surface Mount Video Intercom System

Intercom system designed for single resident or commercial properties providing video entry via IP with a free to download smartphone app.
Ideal for outdoor use on single home or small business.
Up to 32 monitors can be connected to this device.
Pushing the button will call all monitors inside the building.
170 degree fisheye camera single-button and audible anninciation.
IP54 (recommended to be put under a canopy or covering)

.......more details

041D8993

LiftMaster Cover Silver 8365W 83650-267

Replacement LiftMaster® Cover.
Compatible with various LiftMaster® 8365W Series WiFi® AC Chain Drive Garage Door Openers; powered by myQ

K41-0381-000

LiftMaster Toroidal Transformer 700lb / 120VAC-240VAC

For Maxum ops

K005-KEY

Replacement Key for 3BXLT Key #5

Replacement key only for key #K005

S6TL2641E15

Erone 18-Channel Handheld Transmitter 433MHz

Wireless System Chart

OMT-6112-MON-N1

Manaras Medium-Duty Trolley Operator 1/2 HP 120V with Elect. Circuit Board Monitored N1 Eyes

Designed for use on smaller and low-cycling industrial standard lift sectional doors.
It features a high starting torque intermittent-duty industrial type motor and a quick release disconnect arm.
Equipped with the new Electronic Control Board (BOARD 070) with N1 photoeyes
Maximum Door Height: 14' (4260 mm)
Back Room: door height + 3'11" (1175 mm)
Head Room For Tracks: 5" (127 mm) above the highest point of door travel

.......more details

K20-3100M-5-H25

LiftMaster Electric Motor 1 HP 575V 3P L5

For use with various LiftMaster® Logic 5.0 Commercial Door Operators and Slide Gate Operators.
Also known as: 20-3100M-5 K20-3100M-5

BEA-10-IXIO-ST

BEA Presence Sensor for Automatic Sliding Doors

IXIO-ST is an effective versatile and easy-to-use presence sensor for automatic sliding doors.
It can be used for both clear door openings and side-lite protection
Precise infrared curtains coupled with visible alignment beams make the IXIO-ST extremely safe and easy to adjust.
This state-of-the-art sensor features an on-board LCD screen that streamlines the installation and setup processes.
Intelligent Solution :On board microprocessor optimizes data analysis monitors sensor performance and enables system integration
Mounting height: 6’6” – 11’6”

.......more details

K94-37849-1

LiftMaster Electric Motor 1HP 3-phase

Replacement motor for SL595103U and SL595103UL

185002

Marantec Maveo Bluefi Stick

The maveo bluefi stick brings Wi-Fi connectivity to your residential garage door openers via phone app or the Internet
Compatible only with: Synergy 200 and 300 series IP20 Bluetooth 4.2 also known as 187141 with manufacture date after March 2022.
NOTE: Operators manufactured before March 1 2022 require a control board upgrade in order to be compatible with Maveo products and UL 325 unattended operation. (available soon)

Q003

LiftMaster Chain Tensioner Bolt w/2 nuts K07-50637

This replacement kit is most commonly used to tighten the attached chain on the sliding gate

DECO-FASTNR-HNGE

Decorative Hinge (Carriage-Style) Fastener Black Sold per Screw

Self Taping screw #8 x 1/2" 18-8 Stainless Steel Black Head
Black crinkle head
Ideal for decorative (carriage style) hinges

210-0053

TNR Doors CurtainLok Ass'y Kit UHMW-PE 5/pr per Kit (10pcs) ** Price by Quote Only

5 complete curtainlok's with fasteners
Curtain Lok™ for 1/4” thick Rubber Doors

K41-0247-000

LiftMaster Limit System INSL24UL/IHSL24UL

Compatible with the following models: IHSL24UL INSL24UL

104-0011

TNR Chain Tensioner CT3201 ELS16-B1

Ansi #80

K79-13493-600

LiftMaster Logic Board Replacement FDC5021UR

Replacement board for fire door model FDC5021UL

7500-FS-GALV

Fire Shutter Hot-Dipped Galv Interlocking Slats Made-to-Order

Shutters can be up to 13'- 6 inches wide and 12 feet tall with UL labels Class A B or C while still being able to function as normal counter rolling shutters.
Oversized fire shutters can be manufactured up to 20 feet wide
Model 7500 fire shutters can be installed with either a manual lift external motors a hand crank with or without automatic testing tubular models with the option of automatic testing
Along with UL labels that will automatically close the fire shutters for either 3 1½ or ¾ hours the fire shutters can also be manufactured with smoke protection
Available finishes: Hot-dipped galvanized steel with an optional baked-on gray polyester enamel coating or 304 stainless steel with a number 4 finish flat profile
The viscous speed governor can be set to automatically close the fire shutters at speeds of 6 inches per second up to 24 inches per second complying with NFPA 80 specifications.

.......more details

15-50B40QGH

Sprocket Kit 50B40 1.25" Bore x 1/4" Key w/ SS

SPR50B18X1

Sprocket 50B18 1" shaft 1/4" KW

18 tooth sprocket for #50 chain

GH-383-1.5

Doorlec Industrial Gearhead Door Operator 1.5 HP 208V 3-Phase

Extra Deavy-Duty Gearhead Industrial Operator or large Sectional or Rolling Steel Doors
DC-2000 Logic Board with adjustable Timer To Close Delay On Reverse and Traffic Light Control
Worm gear reducer 40:1 ratio for high-torque and long life
Solenoid Disk Brake Prevents coasting and secures the door when closed
TEFC (sealed) continuous-duty electric motor with overload protection
Optional Friction Clutch available

.......more details

BRKIT001

Manaras Brake Resistor for 120V Rapido

Added option to RSH or RVH operators

Wiring instructions

CP-LX300

Lynx Interface Board for UL325 models

For use on 460V & 575V 3 Phase only

GUK-BX

Genie Universal Wireless Keypad 41249R

Works with most major brand garage door openers. Compatible with Genie Intellicode (rolling code) Genie 12 and 9 switch systems going back to 1988.
Also compatible with Overhead Door Chamberlain Craftsman LiftMaster Wayne Dalton Linear Megacode Xtreme Garage Ryobi Sommer and Marantec. •With the Genie Universal Keypad you can control a combination of up to 3 different garage door openers. Each of the 3 openers can be programmed individually of the others so having multiple brands of openers controlled by a single keypad is not a problem.
Powered by two triple-A batteries (AAA)

COVER047

Manaras C-Box ABS/PC Green Cover with STICKER079

Fits most Manaras models

236515

Wayne Dalton Res. Bottom Bracket Roller Holder LH

Compatible with Wayne Dalton 9100 9400 9600 9800 Foamcore II garage door models.
Pins & Cotters Included
Top quality galvanized steel
Dimensions: 4" Wide x 1.25" High x 1" side flange with milford pin
Sold as a single unit

CB-4G

Cell Box Prime 4G LTE Cell Call Box w/Keypad Pedestal Mount

Open gates from your phone.
Built in time clock control.
Remotely program your keypad codes by app.
Automatic 7-day timer controlled by the app.
Activity log (see who opened your gates and when).
Access your property by telephone caller ID (known number) SMS or pin code.

.......more details

Sell sheet Quick Start Guide

SPP2905-TC

Telco SpacePak Diffused Proximity Photoelectric Sensor with 5m Cable

Multi-voltage diffuse proximity photoelectric sensor with a detection range of 5 meters without the need for a reflector.
Operation mode and max sensing range: Diffuse proximity: 0-5 m
Compact rectangular housing (50 x 50 mm x 17mm)
Power output and signal level indicators

User manual Manuel d'utilisateur Spec sheet

LMDBPACK-SN

LiftMaster Yale Smart Touchscreen Deadbolt Satin Nickel Finish Includes 821LMC

Smartphone Control – Pair with included Lock Wi-Fi® Bridge to securely lock unlock and view door activity in the myQ® App.
Touchscreen Keypad – Wakes with a touch and has backlit numbers that won’t wear off.
Key Free – No key hole means no lock picking or keys to lose.
9V Battery Back-Up – Never worry about getting locked out due to dead batteries.
Works with Key by Amazon to provide a seamless delivery experience.
Eligible Prime Members simply download the Key by Amazon App and link it to your myQ account.

.......more details

Programming instructions Sell sheet

WHTG-HINGE-TRUSS

Whiting Special Order Hinged Truss II Complete Door **POR

Special order to customer's specs
Non-wood core door
Double wall extruded aluminum panels all designed for optimum strength and appearance.
Double sealed inclined joints to stop water.
Top bottom and side seals standard.
4 rows of hinges.

.......more details

WHTG-TEMPGUARD

Whiting Special Order TempGuard Door **POR

Special order to customer's specs
1-1/2” fiberglass panels are clad with aluminum exterior facing for easy cleaning and excellent acceptance of paint and decals.
No rivets on face of door to interfere with lettering or decals.
One piece pultruded fiberglass shell featuring foam-in-place urethane insulation.
All hinge fasteners reinforced with steel backing plates.
Replaceable double seal at each panel joint.

.......more details

7001-14-ANODIZED

Commercial Side & Top Weather-Strip 14' Long - Anodized 7001-AB

Anodized galvanized steel with black dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.

Q118

LiftMaster Access Door Keys Qty 2 K80-50295

Also Known as K80-50295

SF514-S

Spring Fitting 5-1/4" Stationary Side Only for 1" & 1-1/4" shaft

Can be used with either 1" or 1-1/4" winding cones
Includes: (1) stationary side only.
2 x 3/8-16 thread holes at CC=4.25"

E/BLOP/151

Automatic Systems Safety Edge for BL229 16'-5"

T-831

FL-Allstar Stationary TransmitterO/C/S 3-Btn 1-Door 311 MHz 107483

Open/Close/Stop stationary remote for 1 door.
Designed for commercial automatic door and gate operator applications.
This transmitter can operate a single receiver connected to one operator
Compatible with 3-channel Allstar and MVP receivers
Easy access to battery and coding switch
Power: 9-volt battery

.......more details

7M-NICE-BAR-ASBY

NICE Replacement Bar Assembly for M7BAR Barrier Gate

Bar assembly comes with:
(1)XBA15 -- 3M BAR
(1)XBA14 -- 4M BAR
(1)XBA9 -- EXPANSION JOINT FOR CONNECTING BARS
(2)XBA13 -- RUBBER IMPACT PROTECTION STRIP
(2) WA10 -- RED ADHESIVE REFLECTIVE STRIPS

.......more details

CAP475

Capacitor 125VAC 475MFD

Motor Start Capacitor 125V 475 MFD

50430-KEY

Doorlec PBS 2-Btn O/C and Key Switch On/Off Nema 4/12

Open / Close with On / Off Key Switch Nema 4/12
Green - Open Black - Close

DW-3S-300

Fraba Air Wave Switch Larger Housing with Copper End NOC

Fraba DW3S-300 air switch 10008797-2
Normally Open Contact (NOC)
Screw Type Connector
Dimensions: 158x60x39 mm (6.22" x 2.36" x 1.54 '')
Housing: ABS Switch: PA6V0 Nema4
Normally Closed Contact achieved by adjusting the sensitivity screw

.......more details

Operating Instructions

19-4071

LiftMaster Chain #40x71 No Master Link

#40 x 71 pitch no master link
Same as G194071
Compatible with LiftMaster Model SL595GL Slide Gate Operators.

SL595203UL

LiftMaster Dual Voltage Slide Gate Op.2 HP 208/230/460V 3 Phase - Heater NOT Incl. UL325 ***NLA

UL 325 compliant system.
Power: 208/230/460/575 VAC. 3 Phase.
Accessory power: 24VAC 500mA max.
Monitored safety inputs: 3 Main Board 3 Expansion Board.
Temperature specs: Without Heater: -4°F (-20°C) to 140°F (60°C). With optional heater (HTRNB: HTR460 for 460V operators): -40°F (-40°C) to 140°F (60°C)
Gate travel speed: 12 in. per second.

.......more details

Installation manual Manuel d'installation First step for installation Première étape pour l'installation Sell sheet Wiring diagram Wiring diagram 575V

41A5585

LiftMaster Drive Gear & Sprocket Kit 3/4 HP

Kit includes: Worm gear Helical gear Retainers Washers Pins Bearing plate Grease Detailed instructions
Compatible with Liftmaster 2575 3275 3575 and 3575S models

14-1014

PVC Roll 8" x .072 Standard Clear Ribbed 150' for Replacement Strip Curtain

Suitable for most average applications.
Temperature Range: -20°F to 150°F (-28° C to 66° C).
Formulated with ingredients that meet USDA requirements for incidental food contact.
Ribbed grade – for greater abrasion resistance and longer lasting clarity

K75-39337

LiftMaster Trolley Nut Kit LA500

The travel nut on LA500DC and LA500DCS gate operators may break when excessive force is applied to the gate such as being struck from a vehicle.
The travel nut can be identified as the white plastic nut that attaches to the internal lead screw of the arm.
The symptom of this problem is that the trolley assembly slides back and forth along the guide slots without mechanical restraint.
LiftMaster has created Trolley Service Kit K75-39337 with all the necessary parts and provides instructions on how to replace a damaged travel nut within an LA500 arm

Replacement instructions Instructions de remplacement

MOTOR009

Manaras Electric Motor1/2HP 120/240V 1PH

Instant reverse intermittent-duty electric motor only for MTBL MJ MJH MTH & MTBH models
1725 rpm built-in reset

10PBJL

Jamb Push Plate SS with Handicap Logo Only

1⁄16 inch thick stainless steel for maximum durability
Concealed fasteners to minimize vandalism
Compatible with both surface and flush mount boxes
Faceplate Material 16 gauge 304 2B Stainless Steel
Backplate Material 1⁄8 inch thick Aluminum
Mounting Screws Stainless Steel 6-32 × 1 in & 8-32 × 1 in Allen Head Size: 5⁄64

.......more details

.207-2-L-C

Cut-to-Length Torsion Spring .207 x 2" Left Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

4X4PO50

Devanco Loop 4' x 4' pave-over 50' lead-in

Ideal for use on with gravel driveways or surfaces that are to be asphalted
Features a twisted lead-in to reduce the chances of interference and false detections.
Direct burial loops should be buried approximately 6" deep

PRO-J-10053-U-RH

Micanan 1HP 575V 3P Jackshaft Monitored ECB N1 Eyes Right Hand

On board receiver with antenna
Continuous duty industrial motor with overload protection
Heavy duty 5L V-belt
Adjustable friction clutch
Solenoid brake (optional PRO-JB) recommended for large doors
3/4" permanently lubricated & sealed precision ball bearings on pulley shaft

.......more details

Pro J Manual Specification Sheet

MM-00334

Micanan Bearing Support Plate for 5HP PRO-GH (Reducer 120)

MM-00327

Micanan L-Bracket Right Angle Front of Coil For Rolling Steel Doors

.421-514-L

Cut-to-Length Torsion Spring .421 x 5-1/4" Left Hand Wound Gold

Priced per inch - cones & filler sold seperately
For factory installed cones use part no. C-514-INSTALLED

PRO-J-7543-U-RH

Micanan 3/4HP 460V 3P Jackshaft Monitored ECB N1 Eyes Right Hand

On board receiver with antenna
Continuous duty industrial motor with overload protection
Heavy duty 5L V-belt
Adjustable friction clutch
Solenoid brake (optional PRO-JB) recommended for large doors
3/4" permanently lubricated & sealed precision ball bearings on pulley shaft

.......more details

Pro J Manual Specification Sheet

PRO-J-5043-U-RH

Micanan 1/2HP 460V 3P Jackshaft Monitored ECB N1 Eyes Right Hand

On board receiver with antenna
Continuous duty industrial motor with overload protection
Heavy duty 5L V-belt
Adjustable friction clutch
Solenoid brake (optional PRO-JB) recommended for large doors
3/4" permanently lubricated & sealed precision ball bearings on pulley shaft

.......more details

Pro J Manual Specification Sheet

R4

Erone Radium 4-Channel Key Chain Transmitter 433MHz

Designed for the control of automatic closing systems and anti-burglar systems thanks to its very high security coding system (KeeLoq® Hopping code).
The code sent by the transmitter changes at each activation avoiding any scanning and copying risk.
A special algorithm allows to keep synchronized transmitter and receiver.
Range up to 250 m (820 ft)
Ergonomic rugged & durable
Battery: Two 3V lithium battery (CR2016)

.......more details

Wireless System Chart

LVB620-11SF

Steel-Faced Laminated Bumper Black 6" Projection Vertical Installation 20" x 11" Sold Individually

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required.
5/8" anchor bolts mounted through pre-drilled holes into dock or can be welded to curb angle.
Steel face is 3/8" thick heavy duty high carbon steel that is mounted over a laminated dock bumper.
Plate to be welded to 2 or 3 steel support brackets which are to extend back to the 3/4" supporting rods.
Brackets to be punched with elongated holes to allow steel face to "float" upon impact.

.......more details

44-60-220

Extension Spring 10' Door - 220 lbs *** By Quote Only

Clipped ends
44" long 60" stretch 220 lb load

BI-004

Astragal Bottom Cloth Black PVC Sold by the Foot

9004-10

Excalibur Threshold Kit 10'2" x 4" W Solid Aluminum *** Price by Quote Only

Stands 1/2" tall
Built with 6061-T6 solid aluminum to withstand extreme weight and excessive traffic conditions.
Two-way fastening/seal system won’t shift buckle or leak
Top V-groove design provides for skid proof protection and improved tire traction on loading docks and incline ramps.
The 1/2" diameter wire access port makes it easy for sensor and security installations.
The kit comes complete with pre-drilled counter sink holes 3/8" anchors and sealant.

.......more details

MV-00147

Micanan Control Station 3-Btn O/C/S Nema 4 Surface Mount c/w Key Lock-out & Pilot Light 24V

MA116RDOT

LiftMaster White Aluminum Arm with Retro-Reflective DOT Tape 17 ft

For use on Mega-Arm gate operator
Red White reflective DOT stripe

Additional arm accessories

5-30-7

3" Vertical Track 12-GA 12'-4" (13' door) Sold per Pair

Pierced track

TRACK-GUARD-48

Track Guard 48" Tall Safety Yellow With Base Sold as a Pair

Provides impact protection to vertical track
45° angle flange adds strength protects from side impact.
7-gauge steel construction powder coated safety yellow for high visibility.
1/4” foot plate drilled with slotted holes for three 1/2” anchors.
Wall flange drilled with slotted holes for four 3/8” anchors
Includes: 60-5094 (right) and 60-5095 (left) sides

.......more details

48"Track Guard Shop Drawing - Left 48"Track Guard Shop Drawing - Right

38C

Skylink 1-Button Universal Remote ***NLA

Easy to carry or clip on sun visor.
Operating range of 100 feet and more.
12V alkaline battery included.

IR55

Industrial Thru-Beam Infrared Sensor Nema4 ** Discontinued

Infrared Sensor
NEMA 4 Hooded Metal Enclosures
Distance: 165 Feet
12 - 24 VAC/DC
Internal Heater Standard
UL 325 Compliant

.......more details

Instructions manual

4059GY-216

Garex Thermo Moulding 3/4" Beading Gray 18ft

White and Black also available

MWT12

Miller Edge Transmitter RF in Nema 4 Enclosure *** To Extent of Inventory

The MWT12 safety edge transmitter is designed to provide wireless signal transmission form the safety edge to the motor controls.
It is easily mounted and wired to the gate or door edge sensor. When the sensing edge comes into contact with an obstruction a closed circuit signal is created and is sent to the transmitter.
The transmitter relays the information to the receiver and the receiver passes the signal along to the operator motor.
The gate or door stops movement and will then reverse the direction of travel.
Comes standard with a NEMA 4 weather-proof enclosure. The enclosure can be easily mounted with the four mounting holes and screws provided
Response time: nominal 30msec.

.......more details

MK-00429

Micanan Reversing Relay 24VAC Coil 4-Pole QPDT 14-Pin Flange Mount

For PRO-LJ LH LHAB

MOV001

Manaras MOV Surge Protector

For 3-phase commercial operators
680V 1800V CL.V

180215

Decorative Hinge Apen-V3 Style 16" Stamped Steel Sold per piece

As seen on carriage house doors

OCS-PANEL

GDI Panel Buttons Open/Close/Stop N1/ N4 G3253

Power LED

M-18

Molded Rubber Bumper Black 18" L x 10" W 4" Projection 2-Hole Sold Individually

Manufactured from reinforced prime rubber
Rectangular horizontal mount
4-1/2" depth
Ideal for light traffic loading docks.
Molded bumpers are molded in one piece and will not warp rust rot or harden.
Perfect protection for in-plant wall protection from forklifts and other material handling vehicles. and will not warp rust rot or harden.

.......more details

LB412-12

Laminated Bumper Standard Black 12" x 12" 4" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 1” diameter.

.......more details

37222R

Genie Series III Deluxe Wall Console

3 function wall console for use with IntelliG™ and TriloG™ openers.
Same as GBWC-BX
3 function console operates door opener controls lights and security lock out switch.
Not compatible with Series II

FCC316-500

Cable 3/16" 6x19 Galvanized Fiber Core 500ft

For high-speed doors
3/16” 6x19 galvanized
Polypropylene core to help prevent wear and increase flexibility
High life cycle wire rope for rapid doors
Lubricated during production for extended life
500 feet per roll

.......more details

ALUM-547

Aluminum 24" x 100' Spool Sable / Sablon # 547

20% thicker than the aluminum sold in retail stores (0.022" )
Gentek # 547
Reverse side is #431 Bright White

Colour chart

MIRM-T2

Miller Edge Patriot 2 Photo Eye Monitored 30ft Non-Contact ** NLA

Attaches directly to a Sectional door.
The photo eyes travel below the door during the closing cycle.
Unlike traditional static mount photo eyes; Patriot travels with the door sensing obstructions prior to contact.
The Patriot2 non-contact system consists of thru beam photo optics.
Emitting and receiving eyes mount into a rigid steel spring loaded retracting housing.
The housings attach to the bottom section of the door and extend below the leading edge of the door providing an invisible infrared light beam of protection.

.......more details

7001-14-CHARCOL

Commercial Side & Top Weather-Strip 14' Long - Charcoal (H)

Charcoal galvanized steel with charcoal dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.
Full case quantity only (10)

WINDOW-21X13

Garaga Clear Thermo 21 x 13 White Frame 1-3/4" **** USE CODE G-21x13-134-W

PMR10RGT

Carlo Gavazzi Retro-Reflective Sensor

PMR series sensors have a sensing range up to 32.81 feet and a fixed sensitivity.
Immune to ambient light Selectable output function.
The plastic housing is IP 67 rated and allows cable or screw terminal connections.
Optional timing features include: Delay on operate delay on release or one shot (triggered on leading or trailing edge).
24-240 VAC or 12~240 VDC
5 Wire

.......more details