Devanco Canada - Get The Right Garage Door Opener‎ and Parts

4X3PO50

Devanco Loop 4' x 3' pave-over 50' lead-in

Ideal for use on with gravel driveways or surfaces that are to be asphalted
Features a twisted lead-in to reduce the chances of interference and false detections.
Direct burial loops should be buried approximately 6" deep

Installation Instructions Instructions d'installation Spec Sheet Brochure Loop Placement Guide Guide de positionnement des boucles

5X20SC50

Devanco Loop 5' x 20' saw-cut 50' lead-in

Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
Ideal for use on existing asphalt or concrete surfaces
Features a non spliced continuous wire throughout loop turns and lead-in.
requires the use of loop sealer when being installed to ensure long lasting trouble-free detection

Installation Instructions Instructions d'installation Loop Placement Guide Guide de positionnement des boucles

PRO-LH-5021U-RH

Micanan 1/2HP 230V 1P Medium-Duty Jackshaft N1 Eyes Monitored ECB Right Hand (PRO LHE)

Designed for use on commercial sectional doors with high or vertical lift
May also be used on small rolling grilles with max. 15 cycles per hour
Includes chain hoist
Includes solenoid brake
On board receiver with antenna
On-Board receiver holds up to 20 transmitters

.......more details

Installation manual Specification sheet

14-J

Rolling Steel 3" Flat Endlock

Endlocks are riveted to curtain slats ends of every other slat to prevent slats from shifting laterally and to prevent curtain wear in guides.
Continuous endlocks are both ends of every slat.
Rivets included with endlocks

2528.096

Whiting Dual-Spring Shaft 96" for Whiting Roll-Up Doors

Constructed of 1" outside diameter heavy-duty steel tubing
Holes pre-drilled
Cross Reference: For Whiting # 2376 balancer

SLT14-22P

Rolling Steel 3" Flat Slat 22-ga Primed

SLT2-22

Rolling Steel 2" Crowned Slat 22-ga Galvanized

5X15SC50

Devanco Loop 5' x 15' saw-cut 50' lead-in

Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
Ideal for use on existing asphalt or concrete surfaces
Features a non spliced continuous wire throughout loop turns and lead-in.
requires the use of loop sealer when being installed to ensure long lasting trouble-free detection

Installation Instructions Instructions d'installation Loop Placement Guide Guide de positionnement des boucles

GH205-L5

LiftMaster Gearhead with Brake 2 HP 575V 3P L5 ***To extent of stock

Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.

.......more details

Installation Manual Manuel d'Installation Sell sheet Brochure

GH751-L5

LiftMaster Gearhead with Brake 3/4HP 115/230V 1P L5 ***No Longer Available

Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.

.......more details

Installation Manual Manuel d'Installation Sell sheet Brochure

GH501-L5

LiftMaster Gearhead with Brake 1/2HP 115/230V 1P L5 ***No Longer Available

Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.

.......more details

Installation Manual Manuel d'Installation Sell sheet Brochure

PHOTO-008B

Manaras Non-Monitored Photoelectric Cells Nema 4/12 *** Discontinued

Through-beam type 24V

Installation Manual

.363-3-3/4-RH-C

Torsion Spring .363 x 3-3/4" x 144" RH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .363 ID: 3-3/4" Length: 12 ft

44-60-240

Extension Spring 10' Door - 240 lbs Silver ** By Quote Only

Clipped ends
44" long 60" stretch 240 lb load

RN0034-SS

Roller 3" White Nylon 4-3/4" Stainless Steel Stem Double Sealed Bearing

A supreme double sealed bearing roller that never requires lubrication
Ideal for high usage and high moisture areas ie..carwash
7/16" stainless steel shaft.
200 lb load 100000 cycles for a 12' door
Overall length is 5-1/2” and the shaft (stem) is 4-3/4” which includes the shoulder.

MK00650

Micanan UPCHARGE for N-4 Photocells in Lieu of Nema-1 Reduction for N1 Included. **Obsolete Repl by MK00697

In lieu on the standard Nema-1 photocells supplied with the operator

Installation Manual

.187-2-R

Cut-to-Length Torsion Spring .187 x 2" Right Hand Wound

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

BK304

Jamb bracket J-04 #4 12 gauge

Sold by the piece
Height 3.00" Length 1.9" Width 2.45"
Bright zinc plated 12 gauge steel
2" long track mounting slot
manufactured to accept ¼” fasteners when attaching to the track and 5/16” to lag to the wall.

C-334-INSTALLED

Cones 3-3/4" Factory Installed (Pair)

For do-it-yourself installation use part no. SF375

50430

Doorlec Push-Button Station 2 Button Nema 4/12

Open / Close Nema 4/12

CHAIN058

Manaras #410 chain 48 Pitch (24" long)

OGH-6535-ECB

Manaras 1-1/2 HP 600V 3Ph Gear Head Operator with Elect. Circuit Board

A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
Includes a self-engaging chain hoist for manual operation
25 cycles per hour 80 cycles a day
Hoist on right side standard can easily be moved to the left in field
Full overload protection
BRACKET112 must be used for wall mounting

.......more details

Installation Manual Sell Sheet

OGH-6113-ECB

Manaras 3/4 HP 120V 1Ph Gear Head Operator with Elect. Circuit Board

A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
Includes a self-engaging chain hoist for manual operation
25 cycles per hour 80 cycles a day
Hoist on right side standard can easily be moved to the left in field
Full overload protection
BRACKET112 must be used for wall mounting

.......more details

Installation Manual Sell Sheet

201-300-401-01

Equinoxe Long Range Transmitter O/C/S for 8-Doors 433 MHz New Generation

Open/Close/Stop remote for 8 doors
Range of approx. 1000ft
A heavy-duty remote for Industrial applications
Year 2016 +

Programming Instructions Instructions de programmation

801-300-002-01

Equinoxe Long Range Receiver 1-Door Industrial Enclosure 433 MHz New Generation

1000 ft range
2016+
This receiver will accept 8 Equinoxe O/C/S remotes
Nema 4

Programming Instructions Instructions de programmation

OTBH-6432-ECB

Manaras Trolley Operator 1/2 HP 480V 3 Ph with Electronic Circuit Board

The OTBH is a heavy-duty low headroom trolley operator
Designed for use on industrial standard lift sectional doors
It incorporates a drum-band type solenoid brake
25 cycles per hour 80 cycles per day
1/2 HP operators come with # 48 (410) roller chain

Installation Manual Sell Sheet

OPH-6213-ECB

Manaras Opera-H 3/4HP 240V 1Ph with Electronic Circuit Board

A heavy-duty industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a self-engaging chain hoist for manual operation
Clearence: side room required 15"

Installation Manual Sell Sheet

37407

Doorlec Reversing Contactor BF9 24VAC

T753L5

LiftMaster 3/4 HP 208/230/460V 3P Commercial Trolley Operator Logic 5 ***No Longer Available

Trolley low profile with brake
Suspended from the ceiling the operators are used on sectional overhead doors with standard lift.
T operators are directly attached to drive and control the door.
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.

Installation Manual Manuel d'Installation Sell sheet Brochure

CLUTCHPAD008

Manaras Clutch Pad 1" ID 4" OD

Replaces CLUTCHPAD002

OPJ-6113-ECB

Manaras Heavy-Duty Jackshaft Operator 3/4 HP 120V 1 Ph with Elect Circuit Board

An industrial operator designed for use on standard high and vertical lift sectional doors
Can also be used on rolling doors and grills
It incorporates a floor level disconnect mechanism for manual operation
25 cycles per hour 100 cycles per day
Continuous-duty single phase capacitor start or 3 phase motor open drip proof
Mechanical brake

.......more details

Installation Manual Sell Sheet

MODKIT065B

Manaras Trolley Hoist #41 Brake Release Kit Includes 12' Shaft

Modification kit for in-field upgrades

PPK3M

LiftMaster Passport MAX 3-Button Keychain Remote

Provides total control with one remote for gated communities and commercial properties.
Compatible with the PPWR Receiver for gate access control all 315MHz Security+ LiftMaster and Elite Series Gate Openers and all LiftMaster Garage Door Openers manufactured since January 1995
2x the range of standard remote controls
Narrow-band transmission on 3 simultaneous frequencies (310 MHz 315 MHz 390 MHz)

Programming Instructions Instructions de programmation Sell Sheet

21002

Doorlec Hoist Interlock Switch

37845R

Genie Screw Drive Carriage Assembly

Compatible with the following models: GPower 900 TriloG 1200 TriloG 1500 PowerMax 1200 PowerMax 1500
Works with Screw Drive Shuttle assembly part # 36664R - sold seperately

34538S.S

Genie Magnetic Close Down Limit Switch Assembly 138"

For Chain Glide models

TCR-1

Tri-Code Receiver Single Channel ** DISCONTINUED

Single channel receiver compatible with Linear Delta Multi-Code and Stanley radios
Three position direct connect tabs for commercial and residential garage door openers

Programming Instructions

797

Fasteners Clevis Pin 5/16" x 1" 100/Bag

801

Fasteners Sleeve Anchor 5/16" x 1-1/2" 100/Box

Secure anchoring into concrete brick or block

19-5114

LiftMaster Trolley Chain Pack #41 for 14ft Door

For 3/4 & 1 HP trolley operators

1A4324-EZ

LiftMaster Steel Hood EZ Mount Bracket with Adaptor Plate (75-12362/ 001A4324)

Heavy-gauge steel bracket with EZ mount adapter plate mounting bolts nuts and washers.
Adapter plate holds mounting bolts in place for ease of mounting.
Cannot be used with Model GH 3HP.

C-600-INSTALLED

Cones 6" Factory Installed (Pair)

For do-it-yourself installation use part no. SF600

7001-14-BLACK

Commercial Side & Top Weather-Strip 14' Long - Black (Code B)

Black galvanized steel with black dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.

7001-12-BLACK

Commercial Side & Top Weather-Strip 12' Long - Black (Code B)

Black galvanized steel with black dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.

761

Fasteners Flat Head Carriage Bolt 1/4-20 x 1-7/8" 1000/Box

Full length thread
Max torque = 6

756

Fasteners Slotted Track Bolt 1/4-20 x 5/8" 1000/Box *** Temp Unavailable *** Offer 734

Knurled shank
Max torque = 6

8X118

Fasteners Wood Screws 1000/Box

Ideal for residential weatherstrip

776

Fasteners Hex Head Bolt 1/4-20 x 1" 1000/Box

1/4" bolt has 7/16" head
Max torque = 6
Full thread
Grade 5

99553NYHNG

Nylon Hinge Black #3 *** To extent of inventory

Equivalent to 14-ga in strenght

99551NYHNG

Nylon Hinge Black #1 *** To extent of inventory

Equivalent to 14-ga in strength

19-5814

LiftMaster Trolley Chain Pack #48 for 14ft Door

Chain pack only

CH751L5-LH

LiftMaster Hoist Op. with Carwash Mod. 3/4 HP 115/230 VAC Logic 5 Left Hand

Industrial Duty Hoist Operator with Damp Environment modification.
Comes with either CPS-UN4 or CPS-RPEN4 photoeyes

Installation Manual Manuel d'Installation Sell sheet Brochure

BC096.2

Whiting ColdSaver Door Bright Stainless Steel Clad

Include: Track Balancer Standard Hardware and side top & bottom seals.
Replacement for Utility Trailer s/n CS39865

11-19471

LiftMaster Clutch Shaft

Fits model H operator with Logic 5

K72-14130-1

LiftMaster Limit Shaft Kit H J and HJ Logic 3 Logic 4 and Logic 5 commercial operators

For models H J and HJ Logic 3 Logic 4 and Logic 5 commercial operators
Kit includes: Limit shaft Limit nuts Limit bearings Limit sprocket Interrupter cup Shim washers Compression ring Roll pin and E-rings.

CPT4

LiftMaster Passport 4-Btn Remote Control ** Discontinued

The CPT-4 remote operates up to four different Security+ devices.
Three of the four buttons can operate with a telephone entry or access control system .
Great for gated drives or commercial uses.
Passport Technology use with CPWR Wiegard Receiver.
Also compatible with Homelink systems

Programming Instructions

71B575G

LiftMaster Brake Kit 575V with Solenoid Field Install SL585 and SL595

Kit comes complete with: Brake hub kit brake release lever brake disk spring cup studs compression springs brake solenoid solenoid cover spacers mounting plate pressure plate feather key and conduit.

Instruction Manual

3X6PO50

Devanco Loop 3' x 6' pave-over 50' lead-in

Ideal for use on with gravel driveways or surfaces that are to be asphalted
Features a twisted lead-in to reduce the chances of interference and false detections.
Direct burial loops should be buried approximately 6" deep

Installation Instructions Instructions d'installation Spec Sheet Brochure Loop Placement Guide Guide de positionnement des boucles

MX00037

Micanan Brake Assembly for PRO-J/H Solenoid NOT included

Brake assembly does NOT include the solenoid

D111904

Mitto B RCB02 2-Channel Transmitter

Compatible with Lux 2B gate operator

703-004

Eclipse Gel Connectors Red 20-26 AWG 100/Pkg ** To Extent of Inventory

1104-12FT-GREY

Residential Side & Top PVC Weather-Strip with cap 12' Long - Grey (G)

Grey rigid vinyl retainer with grey flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

1005-2-12'

Aluminum Bottom Retainer U-Shaped 12' Long***Actual Length 12'2"***

For door thickness 2"

27-20112

Truck Door W-Style Spring Assembly Curbside 33" Long

Wire thickness: .182
Spring length: 33 inches long (assembled length)
Inside diameter: 1.188
Includes cable drum and bearing assembly winding cone wound onto spring for stronger desgn and internal spring spacer.

K75-10177

LiftMaster Brake Hub Assembly

Assembly includes: Brake hub set screw push-on fastener and feather key

8FT-CHAIN-LDO

Linear 8ft Chain Rail for LD050/LS050/LDCO (HCT8C)

8ft chain-drive T-rail for LDO33 LDO50 LSO50 LCO75 & LDCO800 door operators
Fully-assembled & pre-tensioned
Compatible with Model CHCR-7/8 & CHCR-8 carriage house I-rail conversion kits

7FT-BELT-LDO

Linear 7ft Belt Drive Rail for LD050/LS050/LDCO (HBT7C)

7ft belt-drive T-rail for LDO33 LDO50 LSO50 LCO75 & LDCO800 door operators
Fully-assembled & pre-tensioned
Compatible with Model CHCR-7/8 carriage house I-rail conversion kit

PROMI-500

Erone 1-Door Stand Alone Card Reader / Keypad **DISC

500 users (proximity badges and/or codes)
3 operating modes: - Mode 0: badge and code - Mode 1: badge only - Mode 2: badge or code
Audible & Visual feedback
1 request-to-exit input
Tamper switch
1 form C door relay output (3A/125V)

.......more details

PROMI-500 Wiring Diagram & Instructions

M3-3313

Marantec 3-Button Transmitter 315 MHz 97245 ** Discontinued

Same as part # 65894 97245
Includes battery CR2032
Made in Germany

Instructions

BK000-B

Residential Top Roller Bracket Adjustable 2-Bolt Sold per Piece

Sold per piece - not sold as a pair
Meant for 2" hardware

MDT-4A

Linear 5-Channel Visor Transmitter MegaCode 318 MHz

Compatible with all Linear access receivers and controllers
Superior transmission range
Factory programmed MegaCode format supports over 1000000 codes
Unique ”Extra” top button
High visibility operate LED
Visor clip included

.......more details

Programming Instructions

DS-KIT

Linear Single Delta Radio Kit ** Discontinued

Kit includes one DT transmitter and one DR receiver
Same as: DNP00011
Operates on 24 VAC power
One channel
Codes: 1024 (set by dip switches)
RF frequency: 310 MHz

.......more details

Installation Manual

SPREADER002

Chain Tensioner for 1" / 1-1/4"

Chain spreader for installation with 1" operator shaft and 1-1/4" door shaft
Designed to keep tension on the chain when used with a wall mount commercial operator. It helps avoid premature wear on the door shaft bearing and commercial operator output shaft bearing

Installation instructions

M18

LiftMaster Remote Control Tester ** NLA

19-50ML-NP

Master Link #50 Nickel Plated

MH00099

Micanan Bearing

Fits PRO-APT and PRO-HHD
Requires 2 per shaft
3/4" Bore

CABLE_316SS-500

Cable 3/16" 7x19 500' Stainless Steel

Comparison charts

CABLE_532SS-500

Cable 5/32" 7x19 Stainless Steel 500ft

Comparison charts

.234-258-R

Cut-to-Length Torsion Spring .234 x 2-5/8" Right Hand Wound Blue/White

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

PD86CNP12QPMU

Carlo Gavazzi Photoelectric Switch Retro Reflective 12-24V AC/DC

Reflector (ER4) not included

Installation Manual

C-134-INSTALLED

Cones 1-3/4" Factory Installed (Pair)

For do-it-yourself installation use part no. SF175

.243-134-R

Cut-to-Length Torsion Spring .243 x 1-3/4" Right Hand Wound White/Yellow

Priced per inch - cones sold seperately
For factory installed cones use part no. C-134-INSTALLED

L0172-092

Low Temperature Grease 10oz Tube

Lubriplate multi-purpose low temperature grease.
Excellent cold operating characteristics

77810.0001

Overhead Door Box Assembly Cushion (#111389.0001.S) ** Price by quote only

Garage door operator bracket for older Overhead Door residential models (Automate 70 Touch n Go R-80 100 100SS 1000) and commercial garage door openers.

K001A6424-1

LiftMaster Circuit Board Assembly Kit 2010 390 MHz

Installation Manual

K001A6424

LiftMaster Circuit Board Assembly Kit 2010 and later 315 MHz

UL325 Replacement circuit board for Medium-Duty Logic Commercial Operators
Used on models MJ MH MHS MT BMT and MGJ (UL325 compliant operators)
315 MHz intergral radio receiver accepts 20 Sec+ remotes or unlimited dip switch

Installation Manual

.375_5-1/4"-LH

Torsion Spring .375 x 5-1/4" x 12ft LH Yellow/Green

Wire size: .375
Inside diameter: 5-1/4"
Length: 12 ft

.225_2"-LH

Torsion Spring .225 x 2" x 12ft LH Orange/Green

Wire size: .225
Inside diameter: 2"
Length: 12 ft

.218_2"-LH

Torsion Spring .218 x 2" x 12ft LH Yellow/Orange

Wire size: .218
Inside diameter: 2"
Length: 12 ft

811LM

LiftMaster 1-btn Dip-Style Transmitter Sec+ 2.0 ***No Longer Available

Extreme range 1-btn encrypted DIP style remote control.
Easy to code 12 position dip switch offers up to 4 096 codes.
NOT compatible with the new Liftmaster 8550 and 8360 garage door openers.
Compatible with the 850LM Universal Receiver.

Programming Instructions Instructions de programmation Sell Sheet

823LM

LiftMaster Remote Light Switch Sec+ 2.0 ** To Extent of Inventory

Controls lights remotely
Turn on lights in your garage yard or home with your garage door opener remote control
Use with LiftMaster Internet Gateway to control lights from smartphone or computer
Compatible only with Security+2.0 garage door openers and accessories enabled by MyQ technology

Installation Manual Manuel d'Installation

29-31245

LiftMaster Relay 12VDC 250VAC 4-Pin SPDT C & D relay 3-phase only

C & D relay 3-phase only

12-10029

Flanged Bearing 3/4" x 1-1/4" x 5/8"

24-24-6

Small Relay 24VAC 11-Pin 3 PDT

T-833-C

FL-Allstar 3-btn 9-Door Transmitter 109023-311 MHz***NLA

This nine channel transmitter controls up to nine doors (open-close) or three doors (open-close-stop).
It has a height switches encoder with three positions: + 0 and - .
Manufacturer's model number: 8833TC (190-109023)
Dimensions: 4 5/8" x 2 1/4" x 7/8"

Programming Instructions

T-833

FL-Allstar 3-btn 3-Door Transmitter 108817-311 MHz

This three channel transmitter controls up to three doors (open-close) or one door (open-close-stop).
It has a height switches encoder with three positions: + 0 and - .
Manufacturer's model number: 8833T (190-108817)
Dimensions: 4 5/8" x 2 1/4" x 7/8"