Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home Your Search Commercial Door
5463.96

Whiting Vinyl Top Seal 96" 1-1/2" wide

  • Original TempGuard top seal used on Supreme body trucks from 2009
  • One piece rigid plastic cap retainer with a flexible vinyl seal.
7001-7-CREAM

Commercial Side & Top Weather-Strip 7' Long - Cream 7001-CC (C)

  • Cream galvanized steel with cream dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
  • Also known as Almond
  • Full case quantity only (20)
K72-12508

LiftMaster Output Shaft Kit (1/3 & 1/2HP)

  • For commercial operator model T
Installation Manual
GTS-16

Garaga Top Seal Single-Fin Black 16ft ** To Extent of Inventory

  • Thermoplastic resin weatherseal co-extruded.
  • For Commercial / Residential applications
  • Screws directly to the top of door no retainer required
IS-3

Interlock Switch for Rolling Steel Doors / Grills

  • Prevents the control of the operator when the door is locked.
  • The switch is a normally closed contact which is connected to the operator interlock terminal.
348.000

Whiting Tongue & Groove Bottom Panel Assembly with #77 Lock Made to Order. **Quote Only

  • 15-1/2" x 96" standard size panel.
  • Extra wide panels will carry an additional charge
  • Primer only
94-61180-33-84

Truck Door 2" Steel Roller 6" Stem for Whiting Roll-Up Doors

  • open-bearing roller
MV-00023

Micanan 1-Door O/C/S Transmitter CT-1 313 MHz

Programming Instructions
8FT-BELT-LDO

Linear 8ft Belt Drive Rail for LD050/LS050/LDCO (HBT8C)

  • 8ft belt-drive T-rail for LDO33 LDO50 LSO50 LCO75 & LDCO800 door operators
  • Fully-assembled & pre-tensioned
  • Compatible with Model CHCR-7/8 & CHCR-8 carriage house I-rail conversion kits
36190T.S

Genie Control Board 3-Terminal

  • Fits the Legacy overhead model and the PMX500 model and is compatible with:
  • 696CD/B
  • Genie PMX/B Model PMX500-IC/B
  • Model 496CD/B
  • GCG & GCG-L Series e.g. GCG350 GCG350L
  • PCG & PCG-L Series e.g. PCG400 PCG450L
    • .......more details
08-11012

LiftMaster Bevel Gear 5/8" ID

  • Fits LiftMaster GH operator
K74-G0589

LiftMaster Hall Effect Sensor

  • For SL595 gate operator
AW-12A

Miller Edge Air Wave Switch in NEMA 4 Enclosure

  • Air pressure is lead via a hose or pipe to a diaphragm contact. This contact converts the positive or negative pressure into an electrical contact and pulse.
  • Applications: commercial sectional doors rolling doors and mass transit
  • Works on doors up to 60ft
  • Can be used with standard pneumatic hose and Miller Edge extrusion
  • Sensitivity: 2mm to 500mm
  • Ambient temperature range: -49F to 180F
    • .......more details
Instructions ManualSell Sheet
15-50B18QGH

Sprocket 18 Teeth 1-1/4" Bore 1/4" Keyway

1A3982

LiftMaster Operator Splash-Proof Cover

  • For models: MH H HCT GH
  • For wall mounted operators 31" L x 19" W x 18" D assembly required.
Installation manual
GM3T-BX

Genie Universal Master 3-Button Remote - 37344R

  • Three Button Master™ Visor Remote
  • This 3 button remote can be used with 3 Intellicode openers
  • Replaces all Intellicode Series I And Series ll remotes
  • Replaces 9 switch and 12 switch 390MHz Genie remotes
  • Works with all Genie model Gated Community Receivers
  • This remote will not work with 315MHz Canada 12 switches openers
    • .......more details
Programming InstructionsInstructions de programmation
.283-2-R

Cut-to-Length Torsion Spring .283 x 2" Right Hand Wound White

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
.225-134-R

Cut-to-Length Torsion Spring .225 x 1-3/4" Right Hand Wound Orange/Green

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
.225-134-L

Cut-to-Length Torsion Spring .225 x 1-3/4" Left Hand Wound Orange/Green

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
86LMC

LiftMaster Antenna Extension Kit

  • For use with 312HMC 412HMC 422LMC and 423LMC
  • Kit contains 15ft of cable
355LMC

LiftMaster Universal Radio Control Receiver 315 MHz **NLA

  • Over 100 billion possible codes makes it impossible to duplicate the frequency
  • Jumper option for momentary or constant relay contact
  • Specifically for use with most 3-wire systems without a transformer
  • Accepts up to 8 Security+ remote control codes and one keyless entry
  • Will work with LiftMaster Sears Craftsman or Chamberlain remotes with the purple learn button (ERT format)
  • Will work on 2 or 3 wire systems. If your system is 2-wire a 24-volt 85LM transformer is required
    • .......more details
Programming InstructionsInstructions de programmation
AW-14

Miller Edge Air Wave Switch in ABS Box

  • Air pressure is lead via a hose or pipe to a diaphragm contact. This contact converts the positive or negative pressure into an electrical contact and pulse.
  • Molded enclosure
  • Applications: commercial sectional doors rolling doors and mass transit
  • Works on doors up to 60ft
  • Can be used with standard pneumatic hose and Miller Edge extrusion
  • Sensitivity: 2mm to 500mm
    • .......more details
Instructions ManualSell Sheet
ME113-L

Miller Edge Black Left Hand Outlet 2-Wire 1-1/2" wide x 1-1/2" high Sold by the Foot

  • Slide in edge designed for commercial sectional doors
  • Retrofits easily to 1-1/4" to 1-1/2" sectional doors
  • Touch sensitive signaling allows for immedita stopping or reversing of motion
  • For a sectional door: measure the daylight opening of the door or measure the panel width of the door
  • This gives you the "active length" of the edge - the length to order.
  • Lead wire: 22 gauge universal
    • .......more details
Installation ManualWorksheetSell Sheet
312HMC

LiftMaster Universal Coaxial Receiver Sec+ 315 MHz

  • External 8" coaxial antenna included
  • Security+ rolling code technology and/or Dip switch compatibility
  • 12 VDC or 18-35 VAC/DC jumper selectable
  • Momentary or constant contact selectable
  • For replacement antenna use 41C3196
  • Accepts up to 31 remote control codes on Normal Security setting
    • .......more details
Programming InstructionsInstructions de programmation
880LM

LiftMaster Smart Control Panel Sec+ 2.0 ***Discontinued replaced by 880LMW***

  • Menu-driven panel gives you complete control of the garage door opener; easily view inside garage temperature time and system diagnostics
  • Equipped with the Maintenance Alert System
  • On-board programming capability makes it easy to program remote controls and MyQ enabled accessories and adjust settings
  • Timer-to-Close automatically closes the garage door in 1 5 or 10 minutes; custom setting from 1-99 minutes
  • Displays Fahrenheit or Celsuis
  • Motion detector automatically turns on garage door lights when movement is sensed
    • .......more details
Installation ManualManuel d'Installation
635LMC

LiftMaster Universal Plug-in Receiver 390 MHz ** To Extent of Inventory

  • Compatible with any garage door opener with a simple 2-wire dry contact
  • Includes 2-conductor bell wire
  • Able to accept 8 Security+ transmitters & 1 digital keypad or 1 dip-switch transmitter and 12 billion code transmitters
Programming instructionsInstructions de programmation
374LMC*

LiftMaster 4-btn Sec+ Transmitter 315 MHz - DISC

  • Compatible with wireless keypad model number 377LMC
  • Compatible with Liftmaster garage door opener model numbers 3595 3585 3575 3500 3280 3265 3220 3255 3245 3110 1356 1355 1346 1345 ATS2113X ATS2113X-CX HCT501130 LGO50113O LGO50113L LGO50113R LGO50113XR
  • This transmitter is replaced by 894LT
71-B120

LiftMaster Interior Mount Solenoid Brake 115V

Instruction Manual
K75-18493

LiftMaster Chain Guide Kit

  • Compatible with SL575 SL585 SL595 SL595U SL595UL and IHSL
  • Kit includes chain guide retainers and bracket for guide holders
.312_3-3/4"-RH

Torsion Spring .312 x 3-3/4" x 12ft RHW Yellow

  • Wire size: .312
  • Inside diameter: 3-3/4"
  • Length: 12 ft
.262_2-5/8"-RH

Torsion Spring .262 x 2-5/8" x 12ft RH Red/Yellow

  • Wire size: .262
  • Inside diameter: 2-5/8"
  • Length: 12 ft
.250_2-5/8"-RH

Torsion Spring .250 x 2-5/8" x 12ft RH Green

  • Wire size: .250
  • Inside diameter: 2-5/8"
  • Length: 12 ft
13-10024

LiftMaster Limit Nut

  • Limit nut / cam for commercial door and gate operators
MJ00003

Micanan Brake Drum ** To extent of inventory

  • Fits all Micanan commercial operators equipped with a solenoid brake
  • Available only in complete kit # MJ00013
CP-SW-MIC

Lynx Limit Switch for Commercial Operator with Logic Board

  • Single limit with curved actuator lever
  • Switch attaches directly to the Logic 6000 board
H14G05

Hinge #5 x 14 gauge

  • Bright zinc plated 14-gauge steel hinge
  • For use with 7/16" diameter stem rollers
  • Full body hinge 2-3/4" wide
  • #5 position
  • Use between sections 5 and 6
  • Same as part number 245
    • .......more details
H14G03

Hinge #3 x 14 gauge

  • Bright zinc plated 14-gauge steel hinge
  • For use with 7/16" diameter stem rollers
  • Full body hinge 2-3/4" wide
  • #3 position
  • Use between sections 3 and 4
  • Same as part number 243
    • .......more details
SEA433

Erone Tuned Antenna 433MHz

  • Increase reception and/or range
  • 11.5ft (3.5m) coaxial cable (RG 58) included
  • L-Shaped bracket for wall-mounting
Wireless System Chart
SEL2641R433-Z4

Erone 4-Relay Stand Alone Receiver 433MHz

  • Up to 85 transmitter keys
  • 2 NO relay + 2 NO/NC relay (24VA)
  • Self-learning memorization
  • Standard pulse output Relay number 4 can be setup to latched output
  • Can be used for O/S/C
  • Power requirements: 12/24Vac/dc
    • .......more details
Sell SheetBrochureWireless System Chart
VBELT_4L360

Manaras VBelt 4L 36" - repl. by A34

  • Used on MJ / MJH models
  • New belt type A replaces old 4L360. Part number VBELTA34
RADIO-47

Manaras MCT-1 3-btn O/C/S transmitter 1 door **Replaced by RADIO-EM932

  • Open/Close/Stop remote for 1 door
  • Comes with LED battery life indicator
  • 9V battery included
  • Can be wall or post mounted
  • Must be used with MCR series receivers
Programming Instructions
218189-01

Linear Trolley Assembly

HAE00002

Linear Safety Beam Set *** No Longer Available

  • Set includes: Sender and Receiver photocells wire and connectors
  • Safety beams will work with all Linear operators that currently have safety beams installed.
219109

Capacitor 1/3 HP 43-53 MFD 250V

  • For LDO33 only
1920.1

Whiting Stainless Steel Top Closure Mounting Plate for Insulated Doors

1336.5

Whiting Stainless Steel Curbside Top Closure Bracket for 10" radius

7953

Whiting Truck Door Hinge Gasket White

1209.1

Whiting Stainless Steel Truck Door Side Hinge with Roller Cover

100BL

1" Light Brush Insert 6ft Long

  • Polypropylene bristles
  • Same as model MS1701
4003-12FT

Aluminum Retainer only for Light Brush 12' Long 90 and 180 degree

  • For angle application (90 degree & 180 degree).
  • For use with Light Brush or Vinyl Insert.
1006-1-3/8-16'

Rigid Vinyl Bottom Retainer U-Shaped 16' Long

  • Black with flexible fin to touch door face.
  • For door thickness 1-3/8"
1003-1-5/8-8'

Aluminum Bottom Retainer L-Shaped

  • For 1-5/8" thick doors.
1003-1-3/8-10'

Aluminum Bottom Retainer L-Shaped

  • For 1-3/8" thick doors.
1104-14FT-BLACK

Residential Side & Top PVC Weather-Strip with cap 14' Long - Black (B)

  • Black rigid vinyl retainer with black flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
32-48-160

Extension Spring 8' Door - 160 lbs Brown ** Replaced by 27-48-160

  • Double - Loop
  • 32" long 48" stretch 160 lb load
  • Springs sold individually
Spec Sheet
25-42-180

Extension Spring 7' Door - 180 lbs Gold

  • Double - Loop
  • 25" long 42" stretch 180 lb load
  • Sold individually
  • Rated for 10000 cycles
  • Same as part number 118
Spec Sheet
28-02090

Truck Door 2" Vert. Track and Right Angle Assembly 96.5" Roadside (LH) for Whiting Roll-Up Doors

  • SPECS: Length: 96.5" Fits door sizes: 72" - 90" high
  • Assembly includes: Right angle mounting track Vertical track and Torsion bracket
  • Cross Reference: W #2275-2
  • Galvanized steel 14 gauge construction
  • Tongue and groove for proper alignment at joints
26-40001

Truck Door Bottom Seal Standard 98" Long for Todco Roll-Up Doors

  • Extruded from long lasting rubber
  • Prevents dirt and moisture from entering cargo bay.
  • Cross Reference: T #80840 W #3257 610200
25-60052

Truck Door Latch Plate for Whiting Roll-Up Doors

  • Steel construction Plain finish
  • Contoured for proper lock engagement
  • Cross Reference: W #2804
Z9403

Coupler 1" Bore Adjustable Silver

  • Malleable Iron for strength
  • Set screws and jamb nuts installed
  • 1" bore with 1/4" keyway
  • Thickness: 0.35"
  • Painted silver
H11G01

Hinge #1 x 11 gauge

  • 11 gauge hinge #1 - 0.61 lbs
  • Bright zinc-plated
  • For use with 7/16" stem rollers
  • Item code # 224185
RN1124

Roller 2" Nylon 4" stem 11 ball White

  • White Nylon Roller Wheel Diameter: 2"
  • Working Length: 3.75" Overall Length: 4.69"
  • Box qty: 150 Box weight: 49 lbs (2-4-11 White Nylon)
6X16PO50

Devanco Loop 6' x 16' pave-over 50' lead-in

  • Ideal for use on with gravel driveways or sufaces that are to be asphalted
  • Features a twisted lead-in to reduce the chances of interference and false detections.
  • Direct burial loops should be buried approximately 6" deep
Installation InstructionsInstructions d'installationSpec SheetBrochureLoop Placement GuideGuide de positionnement des boucles
BOLT016

Manaras Hex Bolt 1/4-20 x 4

15-50B22LGH

Sprocket 22 Teeth 1" Bore 1/4" Keyway w/SS

AVP-1

Ace Type Keyswitch with Aluminum Mounting Plate

  • Zinc Alloy Die Casted housing and Cylindrical Chrome Plated
  • Tubular key with 2 keys
  • 60 Combinations Available
  • Spring Return Type
  • Recommended for multiple dwellings
  • Contact ratings: 4 A 125V AC 2A 250V AC
    • .......more details
LB1210-24

Laminated Bumper Standard Black 10" x 24" 12" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
71-B1PH

LiftMaster Internal Brake Kit w/Solenoid 120/240V 1PH for L5 Operators

  • Works with Logic 5 commercial operators and SL585/SL595 U and UL gate operators
423LMC

LiftMaster 3-Channel Co-Axial Receiver 390 MHz

  • 8" coaxial antenna included
  • Used for open/stop/close on commercial motors
  • N/O and N/C selectable
  • Compatible remote: 33LM
Installation ManualManuel d'Installation
TILT-5

Tilt Detector

  • State of the art technology senses as little as a 5 degree tilt in the motion of electrically operated doors and will automatically stop the motor
  • Safeguards against rolling steel door failure where conventional devices miss
  • Automatically stops the operator to keep door within safe parameters
Sell sheet
CLUTCHPAD005

Manaras Clutch Pad 5/8" ID 4" OD

  • Made from commercial grey vulcanized fiber
CF-101-16

Commercial Side & Top Weather-Strip 16' Long Aluminum / Vinyl

  • Same as Garaga CF101
PROBE-50

EMX CARSENSE-101 Direct Burial Probe with 50' Lead Wire

  • Wand only
  • Requires CS101 (Carsense-101)
10-1036-4

Whiting 2" Nylon Roller 5" Stainless Steel Shaft for Truck Doors

  • A Whiting original part
  • Stainless steel bearings stainless steel shaft
2996

Truck Door 2" Steel Roller 3" Stem Enclosed Bearings for Whiting Roll-Up Doors

  • A Whiting original
MD-00005

Sprocket 410B12 3/8" NO KW 2 SS 1/4"

RBH503L5-RH

LiftMaster 1/2 HP 208/230/460 VAC 3 PH Comm. Hoist Op. Logic 5 Right Hand

  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door.
  • With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
  • Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.
    • .......more details
CP-LX100

Lynx Control Board with Cover for UL325 models

  • For all voltages
Programming instructions
7001-7-SANDSTNE

Commercial Side & Top Weather-Strip 7' Long - Sandstone 7001-SS (D)

  • Sandstone galvanized steel with sandstone dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
  • Also known as Taupe
  • Full case quantity only (20)
114-0298

RW Support 18 x 33

  • Size: 18 x 33
  • Material: Formed Steel 3/16" thick
  • Finish Black Enamal
CRATING

Crating Charge

K79-13493A-400

LiftMaster FDOA Control Board 400 Chip

  • 400 Chip Fire Door Operator Replacement Kit
6X26PO50

Devanco Loop 6' x 26' pave-over 50' lead-in

  • Ideal for use on with gravel driveways or surfaces that are to be asphalted
  • Features a twisted lead-in to reduce the chances of interference and false detections.
  • Direct burial loops should be buried approximately 6" deep
GHX-311-1-RH

Doorlec Explosion Proof Gear Head 1 HP 120V 1PH ECB Right Hand

  • Nema 7/9 control box
  • Electrical connections from motor to control box consists of hazardous location certified fittings
  • NEMA 7/9 O/C/S push-button station included
50181

Doorlec Brake Assembly 230/208V W/Double Pulley

  • Complete brake assembly
HW-BRG-1

Lynx Bearing 1" x 2" OD

  • 2 in total on a MCJH
1222_DUAL_TROLLEY_12'

LiftMaster Dual Trolley kit for 12' high door includes #41 Chain for 12ft High Door Angle tracks (2x) 12' and (1x) shaft

  • Provides a second drawbar-type operation on wide standard door
  • Includes 12ft tracks #41 chain hardware & Round Bar 1" x 20'
  • Works with TDC12 & TDC22 Maxum operators
D4-12

Extruded Bumper Black 12" L x 4 1/2" W x 3 3/4" H w/Metal Insert

  • Reinforced prime rubber of Durometer 75 (±5) (ASTM D2240)
  • 8.3 N/mm2 (±0.5) Tensile Strength (ASTM D792)
  • 98% (±2) impact recovery
  • All extruded fenders are supplied with a metal washer insert
50308

Doorlec Cam Shaft Assembly Comes With Bearings

  • Fits LJ LJH SGO
5001-7-CREAM

Residential Side & Top Weather-Strip 7' Long - Cream

  • Painted aluminum retainer with flexible dual fin vinyl.
  • Residential use.
801-300-002-01-REFURB

Refurbished 801-300-002-01 Unit

PRO-HBH-7521U-L

Micanan 3/4HP 230V 1P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Left Hand (Pro-HHD)

  • 3/4 HP230V 1PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
  • Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
  • N-1 Through-beam (MK-00649) photocells included. Other options available.
  • 3-btn O/S/C (02-103) wall control station included
  • Adjustable Friction Clutch 5L320 drive belt
  • #50 Roller chain 18 tooth door sprocket included
    • .......more details
BEA-35-1566

BEA Power Cable RS-20US IS40

  • Replacement power cable only 35.1566
  • Replaces 35-1195
  • RS-20 US-Colored. Cable gland M16
PB-001

Skylink Garage Door Wall Button

  • Install the Skylink Wall Button inside your garage.
  • Allows manual operation of your garage door opener.
  • Illuminated LED indication.
  • Easy to Install.
  • 30-foot Wire Included.
  • Mounting Hardware Included.
    • .......more details
TM1-PLUS

Programmable Timer

  • 6 modes of operation : Delay on operate Delay on release Latching #1 Latching #2 Pulsing #1 Pulsing #2
  • Adjustable from 1 second to 4 hours with programmable dip switches LED status indicates when timer function is active
  • Microprocessor based / controlled clock for accuracy of 2%
  • Operates on a power supply of 12vdc or 24vdc
  • SPDT relay output : 5 amp 24vdc contacts
CRBH505L5R

LiftMaster 1/2 HP 575 VAC 3 PH Commercial Hoist Operator Logic 5 with Carwash Modification

  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door.
  • With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
  • Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.
    • .......more details
K41-0252-000

LiftMaster Gear Reducer IHSL24UL

  • Compatible with LiftMaster® IHSL24UL Series Industrial Heavy Duty Gate Operators
110968.001

Overhead Door Limit Shaft Kit RMX

K41-0372-999

LiftMaster Drive Sprocket Chain Repair Kit

  • Repair Kit to correct quality issue with TDC1200 & 2200 Maxum trolley openers
  • MAXUM CDO SKUs affected TDC7S1BMC TDC7S4BMC TDC12S1BMC TDC12S4BMC TDC12X1BMC TDC12X4BMC
MWT12B

Miller Edge Transmitter Binary Nema 4 Enclosure

  • The MWT12 safety edge transmitter is designed to provide wireless signal transmission form the safety edge to the motor controls.
  • It is easily mounted and wired to the gate or door edge sensor. When the sensing edge comes into contact with an obstruction a closed circuit signal is created and is sent to the transmitter.
  • The transmitter relays the information to the receiver and the receiver passes the signal along to the operator motor.
  • The gate or door stops movement and will then reverse the direction of travel.
  • Comes standard with a NEMA 4 weather-proof enclosure. The enclosure can be easily mounted with the four mounting holes and screws provided
  • Response time: 70 milliseconds
    • .......more details
Installation Instructions MWT12BSpec Sheet MWT12BFAQ MWT12B